[ROM Package] [xda-devs] Windows Phone 7 USB Video - Windows Phone 7 Development and Hacking

Windows Phone 7 USB Video
-------------------------
Released by: XDA Dev Team
-------------------------
With the software in this release it is possible to add functionality to a custom ROM that allows to switch the USB-port of a Windows Phone 7 device to Video Out and back to normal Zune sync. The desktop software can be used to display the video of Windows Phone 7 device on a PC. This also works for XNA software, so this allows to make full-size screen-captures of games too, by pressing "Prnt Scrn" while showing the video output on a PC. The desktop-software can also be used for demonstrations and presentations of Windows Phone 7 content.
Note:
When connected to the PC in Video Out mode you CAN'T sync any content to the phone or push apps to the phone. It will not show up in the Zune Client when in Video Out mode and you will NOT get Internet connection pass through either. An automatic reboot is required after every time you switch the phone from Video to Default mode or vice-versa.
Note:
The app that switches USB to Video Out on the phone also changes a registry setting that will slowdown the refresh-rate on the phone. That setting is restored when the USB profile is restored. If the setting would be left as it is by default, the USB traffic will be overloaded, which will result in much more lag, than a lowered refresh-rate. So, when the device is rebooted after changing USB to Video Out, be prepared to get a less smooth experience on the device. After changing USB back to normal, the device will respond as usual.
Requirements to show USB Video out on a PC
WP7 USB Video Out.rar https://hotfile.com/dl/169342947/0b8b7e7/WP7_USB_Video_Out.rar.html
Proper drivers on your phone.
HTC phones need a patched Qualcomm driver, because HTC has prevented the Video Out driver from running. The patched driver for 1st generation HTC's and for 2nd genration HTC's are included in this release. This patched driver needs to be added to the custom ROM.
Client Application on your PC.
Custom USB Driver manually installed on your PC (only tested on x86).
A High Speed USB Cable. Do not use over 10' cable or a USB extension cable. Extenders, even powered ones won't work. You must be directly connected to the PC with your 10' or shorter USB Cable.
Specifically for USB Micro we have only found this cable to work and thankfully it is very inexpensive. Use of any other USB Micro cable longer than 3 feet is not recommended and will most likely lead to demo failure.
Disable your PC's screen timeout. No Screensaver, etc.
Note:
The desktop drivers are not signed. That means that there will be issues running this on Windows x64. The get this running read instructions from Solution 2 here:
http://www.techspot.com/community/t...signed-drivers-in-windows-vista-7-x64.127187/
Cooking
Put "PkgSetting_USB2VIDEO" in your kitchen.
Put "PkgSetting_USB2VIDEO_HTCDriverfix_1stGen" only in your kitchen for 1stGen HTC.
Put "PkgSetting_USB2VIDEO_HTCDriverfix_2ndGen" only in your kitchen for 2ndGen HTC.
Enabling USB video out on the phone (ON THE PHONE)
From Start Menu swipe over to the application list and run "USB Video Out"
Answer Yes to enable USB Video out. This is a toggle.
When the phone boots up it is in Zune Mode which enables it to sync data with Zune Client software on the PC. You will need to toggle this to Video mode using the above steps to get video out.
Note: Toggling between Zune mode and Video mode requires the phone to reboot each time.
Setting up driver on the desktop (one time)
Make sure Zune is not running.
Your Phone must be flashed with a ROM that has video out bits on it, they must be enabled, and the phone must be on and plugged into your PC to continue. When the phone boots up the default setting is OFF for the video output.
Start -> Right click on Computer, select Manage
In "Computer Management" click on the Device Manager
Under "Other Devices"
Within the list of drivers Right Click on WM7VIDSTREAM driver, select "Update Driver Software..."
Choose Browse and point Windows to appropriate driver folder.
Approve the Unsigned Driver installation.
Starting application
Launch VidStream.exe.
This application does support disconnect & reconnecting of the phone's USB cable.
If a previous instance of VidStream.exe was running with the device connected, you will need to simply unplug and replug the phone's USB cable.
Press ESC to exit the PC Client application.
Re-enabling MTPz USB sync (Zune Mode)
Open "USB Video Out"
Answer Yes to enable MTPz
The device will reboot to make the changes effective.

We did it! :laugh: :highfive:

Hats off to my buddies from XDA Dev Team!

:victory: enjoy

HD2Owner said:
:victory: enjoy
Click to expand...
Click to collapse
Already
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thx, Good job:good:

Thanks

Good job, pals!

This is awesome. Thank you guys!

Can i rename "qualcomm_usbfn.dll" and modify my registry.For have the old driver if it do not works on HTC Titan?

Thank you very much my friend :good:

What's about nokia drivers? Me need to patch it, or not?

This major breakthrough should be highlighted in XDA News Portal. I really don't understand why not. Well...
Sent from my HD7 T9292 using Board Express

Nice ! This is awsome... Congrads on this great find !
Questions...
1. I'm running a custom rom currently, is it possable to add this with out rebuilding a rom and re-flashing ?
2. Is it possable to use a HTC (touch pro/TP2) Video out cable (with an adapter to make it to Mini USB)to connect to a TV or projector with this ?

nice job!!

Thanks for your hardworking

titi66200 said:
Can i rename "qualcomm_usbfn.dll" and modify my registry.For have the old driver if it do not works on HTC Titan?
Click to expand...
Click to collapse
Better not to play tricks with modules running in kernel space. Besides qualcomm_usbfn.dll is not somehow "horribly modified" - just missing functionality is enabled.
It works on Titan.
DavidinCT said:
...Questions...
Click to expand...
Click to collapse
Answers:
1. No
2. No

I hope Titan chef's include this in their next rom

Lumia 710 work fine!Thank you very much!:angel:

@AndrewSh
Thanks
edit
HTC HD2 work fine!

Related

[HELP ASAP] internet sharing problem

please help.
i'm trying to connect to internet using my x01ht (softbank). but it doesnt seem to work, im getting frustared with this situation
here is my spec :
i'm using
- windows XP professional version 2002 on my laptop.
- microsoft activesync 4.5
- have install Microsoft .Net framework 2.0
my HTC X01HT :
using
- HERM_DOPODASIA_WWE_3.54.707.3_6275_CustomRUU ROM
- SPL 2.10 olipro
- ipl 1.40
- radio ver 1.47
this is what show up in the "control panel\device manager" when i deactived ActivSync and tap internet sharing icon in my hermes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have re-install the driver and point the location to "C:\Program Files\Microsoft ActiveSync\Drivers" and still no luck
and this kind of screen show up :
Please can some-one help me, i'm so desprate
You can try uninstalling the driver, then uninstalling ActiveSync (as the driver is included with the ActiveSync installation). Reboot. Then re-download a fresh copy of ActiveSync 4.5 and install. Reboot again and then connect your phone and see if you can activate Internet Sharing successfully.
Give that a try and report back.
thanks for the reply,
ive :
- uninstall the driver,
- uninstall the active sync,
- reboot
- download new microsoft active sync
- reboot
- and intall active sync again
- tap on internet sharing icon
nope its still show the same error. any other solution?
what's with downloading another copy of activ sync, anyway?
did someone here know, where is the driver file located, when the hardware install?
Activesync drivers
I've never had this problem before, but I've attached a screen shot of the activesync device drivers. I'm not sure if it will help.
Did activesync used to work OK before and now it doesn't? Have you installed anything else since then? Maybe there is a conflict with another driver.
jdel said:
I've never had this problem before, but I've attached a screen shot of the activesync device drivers. I'm not sure if it will help.
Did activesync used to work OK before and now it doesn't? Have you installed anything else since then? Maybe there is a conflict with another driver.
Click to expand...
Click to collapse
microsoft active sync 4.5 still work fine, its still can syncronized with out installing the "windows mobile-based device" driver. see at the pic bellow :
did anyone have more solution on this? please
I don't see the network adapter for your "Windows Mobile based device" in the device settings. (Check my screen shots.) I only see your LAN, Wireless and 1394 Firewire adapters.
If you look at the driver info you will see that windows uses the same drivers for the Internet connection sharing and Active Sync.
When I enable Internet Sharing on my PDA then it automatically turns off the Activesync connection and connects via Internet sharing.
jdel said:
I don't see the network adapter for your "Windows Mobile based device" in the device settings. (Check my screen shots.) I only see your LAN, Wireless and 1394 Firewire adapters.
If you look at the driver info you will see that windows uses the same drivers for the Internet connection sharing and Active Sync.
When I enable Internet Sharing on my PDA then it automatically turns off the Activesync connection and connects via Internet sharing.
Click to expand...
Click to collapse
that's the point, when i connect my hemes to laptop using usb there is a buble pop-up saying "USB device not recognized".
then i look to device manager, there is no network adapter saying "windows mobile-based device"
just when i tap on internet sharing and connect on my hermes, it show up "windows mobile-based device" of course with yellow icon.
and even with out the driver install, i still can syncronive using active sync
any other solution?
Wow! Really strange problem. I understand where you are at. Have you only had this problem with this particular ROM?
Do you have another USB cable you can test with it?
The required drivers are in C:\WINDOWS\system32\drivers
rndismpx.sys
usb8023x.sys
Check and if they are there then maybe swap USB port and also check the cable. Can you try to install activesync on another computer for testing?
Sorry, probably not too much help for you. It's gotta be a process of elimination. Let me know if there's any other info I can send you.
the
- rndismpx.sys
- usb8023x.sys
is not present in windows driver, but i copy the files in to it. but still no luck.
thanks for the help though really appriciate it.
i'm looking for this file "Usb_Rndis.ndi" do you have it, or know where can i got it?
brainet said:
the
- rndismpx.sys
- usb8023x.sys
is not present in windows driver, but i copy the files in to it. but still no luck.
thanks for the help though really appriciate it.
i'm looking for this file "Usb_Rndis.ndi" do you have it, or know where can i got it?
Click to expand...
Click to collapse
Sorry I don't have this file. I suspect something strange with your activesync, though I don't know why.
same problem!
Dear brainet
I have exactly the same problem.
do you find any solution?
Thanks.
i've got the same problem
I have also the same problem. I tested with different roms and differents PC. Windows Vista and Windows XP. the internet sharing works fine for a time and them connection its broken, appears the ballon USB Don't recognized.
I have to restart the phone to use internet again or to sync with active sync.
This is a windows problem. When i use internet sharing with Linux Ubuntu. i don't have this problem.
HTC 8525 HER100
Current ROM WM6.1 Shadow 2.1 TE
Previous ROM WM6 Schaps 4.31
If you have this problem and it has never worked, try a different USB cable. I have a cable that doesnt support syncing over USB, replacing the cable worked fine. This sint a fix for everyone, but it is worth a shot.
Internet Sharing
I don't know if this will help, but it's worth looking over:
AT&T 8525 WM6 USB Internet Sharing.
This may sound obvious but one of the main problems with active sync connecting to your device are firewalls. They block the connection. Disconnect from the internet, switch off all your firewalls and try reconnecting.
I had this same problem. Even registering active syc in my firewall program didnt help. The only solution is to switch it off completely. Some firewalls allow the connection (trend Micro/(my work)), some don't at all (K7 internet security/home) and some allow intermittently. Don't forget to switch off windows firewall too.
or suddenly internet sharing does not work with softbank in Japan?
I also have the same problem, all of a sudden. I wonder if softbank Japan have somehow disabled it from April 1st or something crazy. It would not surprise me... Unless anybody has found a solution?
Hi, I had the same problem, too. I used htc838pro before to do internet sharing and it was working great. Then I got htc3702 (victor) and tried to do internet sharing. It failed to connect successfully with htc3702. Then I went back to my htc838pro, it failed too with same problem. I tried with my Acer NB (XP) and Acer desktop (home pc, XP). They were failed with htc3702 first and then failed following with htc838pro. My htc838pro still works fine with any PC or NB which have not tried htc3702 before. I don't know if there is coincidence or not. But it looks like that I need to re-install XP on my Acer NB if I want to restore its normal function with my htc838pro. However, I think it should be able to be fixed... just don't want to give it up so soon. Thanks. YJ
May be this helps
download this file
it contains drivers needed for internet sahring
download & read readme in it
http://rapidshare.com/files/187027178/Drivers_for_ICS_rndismpx.sy__.zip.html
if link expires(i hav also attached this file)

Tutorial for root Defy fw. 2.51.1

This tutorial is a step-by-step guide valid for fw. JRDNEM 2.51 , JRDNEM 2.51.1 and newest JRDNEM 2.59.0
To make the root is very important to have installed the drivers for you're Defy! You can be found it here -> www motorola com staticfiles Support Experiences Global_Drivers/USB_Drivers_bit_4.9.0.exe and here or h77p:// motofan.ru /files/soft/USB_Drivers_bit_4.9.0.rar -> https:// rsddownload motorola com /download/Motorola_Software_Update.exe .
Prepare the system:
The step 1 to 5 is needed just only the phone is not recognized by windows.
1.Install driver in windows if you don't have installed.
2.After installation restart windows and shutdown the phone.
3.Keep volume up button pressed and start phone, you appear a debug screen with this words ( Bootloader 09.xx - Battery OK - OK to Program - Connect USB data cable ).
4.When windows is started, connect phone with you're USB cable and now windows automatically install driver for it.
5.When the installation it's complete restart windows.
6.Download SuperOneclick 2.1 here -> www megaupload com /?d = 0GGUEBUI this software needs Microsoft .NET Framework version 2.0.
You can get it from http:// www microsoft com /downloads/en/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5
Root the Defy:
7.Connect phone to usb cable, now windows find you're phone.
8.Now you are going to Defy Settings / Application / Development and turn off "USB Debug"
9.Open the SuperOneClick as Administrator (right click Run as ..).
10. Press Root! (See attached image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
11.When appear on the screen "Waiting for device..." turn on USB Debug in the phone, and wait.
12.If everything it's ok, you appear a small banner "Device is rooted", and Now Restart the Defy.
Good Rooting At All!!!
News: For UNROOT follow this method on the post http://forum.xda-developers.com/showthread.php?t=955061
Thank YOU!!!!
...thank you so much!!! I've literally spent hours trying to figure out how to root my defy and I wasn't expecting this to work but it has so major props to you
zephyrteam said:
www motorola com staticfiles Support Experiences Global_Drivers/USB_Drivers_bit_4.9.0.exe
Click to expand...
Click to collapse
Looks like Motorola has removed this file from its site. Can you upload it to a site like rapidshare or one of the other file hosts out there?
you can chose the version 4.8.0 from here -> www motorola com /staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.8.0.exe
OK, I'll try the drivers from
www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.8.0.exe
with
www.megaupload.com/?d=0GGUEBUI
(clickable links are easier )
I'm post new link for driver version 4.9.0 in the main thread!!!;-)
zephyrteam said:
3.Start phone and press vol, you appear a debug screen.
Click to expand...
Click to collapse
Keep volume UP button pressed and start phone (volume up launches debug, volume down launches recovery mode).
zephyrteam said:
4.When windows is started, connect phone with you're USB cable and now windows automatically install driver for it.
Click to expand...
Click to collapse
I didn't see anything happening, but my phone got rooted anyway.
zephyrteam said:
6.Download SuperOneclick 2.1 here -> www megaupload com /?d = 0GGUEBUI
Click to expand...
Click to collapse
SuperOneClick needs Microsoft .NET Framework. The latest version is v4, but SuperOneClick wouldn't run with it.
I managed to run SuperOneClick with .NET version 2.0. You can get it from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5
ok... i'm add this issue in the main thread! ;-)
Worked for my defy, Thanks!
Worked for a treat my defy
UK sim free, fw 2.51.1, 2.1 android, rooted via Win7
SuperOneClick 2.1 worked when Z4Root would not
The SuperOneClick 2.1 method worked well.
I first tried the "noob guide" to root the defy with Z4Root. But no matter what I did it just would not work, I even went so far as to restore my Defy to factory settings and never could get it to work.
This was much easier than I expected and I have not had any problems with my Defy so far.
Next I downloaded the System Recovery App found here at XDA and it also ran smoothly without any problems and I backed up a copy to my SD Card.
Then I downloaded SetVsel from the Market for the Defy to overclock it, it comes with 3 preset Vsel settings for 300, 600 and 800. I kept the first two at 33 / 300 and 48 / 600 then increased the 3rd preset to a 52 / 1000 and the CPU now hits 1000MHz. There is a noticible boost in performance plus battery life is at least as good as it was before. I also ran the stability test just to see if there were any issues and it went well.
Then I downloaded Uninstaller for Root from the market and began deleting the preinstalled bloatware from T-Mobile one at a time and so far I'm not having any problems.
And then Titanium Backup just to be safe. The funny thing is that "after" all of this, now Z4Root works lol.
On the Quadrant Standard benchmark test I am averaging between 1000 and 1209 depending on what is running. And on the speed test I average around 9350 kbps download and 1110 kbps upload speeds, of course it depends on the time of day.
Overall, I have noticed much better performance and it appears to be stable. Thanks for the tutorial, between this and the YouTube walk through for SuperOneClick 2.1 it all went smoothly.
rooted successfully - thanks
Dont know if the way via the debug screen is really needed, but if it works for all, this is very helpful.
I did the "simple" superoneclick (without changing USB-debugging inbetween) and it also got root afterwards.
I had the original 2.1 (German version), which was rooted before with SuperoneClick for 2.1. plus Tenfars recovery installed.
After the OTA Update to 2.51.1. the rooting was just one click.
I only needed to install busybox again to make it work.
Dont know, if I just was lucky ...
The way with the debug screen is needed just only the phone is not recognized by windows! ;-)
A lot of people have so much problem for the recognized session, just this is the best way for all android phone!
Addictive Tips has copy/pasted this thread to their site: http://www.addictivetips.com/mobile/how-to-root-motorola-defy-with-superoneclick/ . They host the required files on their own server, so if any of the download links in this thread stop working there's a backup available.
On my defy I just enabled USB debugging, installed driver on Windows and run SuperOneClick, then I got root.
Going to try this when I get home...
European/german 2.51.1 defy that defies z4root like a mo...
Everything needs to be free(d)!
Finished rooting, but couldn't do it from any of my 2 windows 7 computers so I did it from an old windows XP computah and it worked like a charm.
I love it!
fw 2.51.1 French, 2.1 android, successfully rooted via Win7.
just a little problem... titanium backup does not see it has root access...
titanium backup finally works too !! I installed busybox purposed by itself in its help dialog and it worked !!
thanks a lot for the tutorial !!

[XAP] Native Debugger for WP7 (Requires full unlock)

Title says it all - it is a debugger for native apps.
How to use it?
Prerequisites:
You should have VS2008 and Windows Mobile 6 Pro SDK installed.
If you also have VS2010 + WP7SDK, most likely you won't be able to use debugger in VS2008. To fix this issue copy attached edm2.exe to C:\Program Files (x86)\Microsoft Visual Studio 10.0\SmartDevices\Debugger\target\wce400\armv4i (probably without x86 postfix in Program Files path)
(Just to note - this edm2.exe isn't "special for ce7". It works on WM6 device too)
You should have full unlock on your phone (not dev unlock! not interop unlock!)
What's then?
Sideload NativeDebugger.xap to phone
Run it, wait until ip list appears.
In VS2008: Tools->Options. Then change ip to 127.0.0.1. Screenshot:
Enjoy.
Limitations
You have to run xap after every soft reset
If you create UI, debugger "forgets" to detect app closing. However, breakpoints still work and debug log is still being received.
What else can this xap do?
Native debugging, as it was already mentioned
You can use almost all CE Remote Tools.
Limitations: CERemoteSpy can't setup a window hook (thanks MS for abandoning slot-based virtual memory system)
Process Viewer can't get list of processes
Screenshots:
P.S. If you want to compile native exe, don't forget to generate new coredll.lib
nice work, ultrashot
good work buddy
I'm a little confused here, what's the difference between 'full unlock' and 'interop unlock'
Briefcase said:
I'm a little confused here, what's the difference between 'full unlock' and 'interop unlock'
Click to expand...
Click to collapse
Read
Great!
Now can say bye-bye to a log file of debug!
ultrashot said:
Read
Click to expand...
Click to collapse
So basically it requires a custom ROM (read: HTC Only)?
ZeBond said:
So basically it requires a custom ROM (read: HTC Only)?
Click to expand...
Click to collapse
for now - yes.
The best app here. I am going to search old SDKs.
Hey @ultrashot, nice work man! Any chance you can see whether this can be used with the HtcRoot project (see my sig)? It would help a ton to be able to do debugging, both for improving HtcRoot and developing apps based on it, but I'm still using a stock ROM (and want to make HtcRoot usable for stock ROMs).
I'm not sure why the debugger doesn't work normally, but if it's some kind of permissions issue than HtcRoot should work around that quite well. It does require a working HtcUtility.dll driver, which not all custom ROMs have, by the way.
After hour of trying - I started Zune synchronisation and after it - "Connectin success".
Zoom in - OK.
Remote Spy - OK.
Remote Registry Editor - OK!!! (I will have 1/10 of work sometime)
Remote Heap Walker - OK.
Remote File Viewer - OK and very quick.
Remote Process Viewer - Nothing.
Thanks very much. I must repair process viewer and to learn debugging techniques on WM. M.
Martin7Pro said:
I must repair process viewer and to learn debugging techniques on WM.
Click to expand...
Click to collapse
It isn't supposed to work. I haven't tried to investigate why ms transport exe doesn't work.
GoodDayToDie said:
Hey @ultrashot, nice work man! Any chance you can see whether this can be used with the HtcRoot project (see my sig)? It would help a ton to be able to do debugging, both for improving HtcRoot and developing apps based on it, but I'm still using a stock ROM (and want to make HtcRoot usable for stock ROMs).
I'm not sure why the debugger doesn't work normally, but if it's some kind of permissions issue than HtcRoot should work around that quite well. It does require a working HtcUtility.dll driver, which not all custom ROMs have, by the way.
Click to expand...
Click to collapse
Hi. What's required:
1) ability to put files to \Windows\.
2) ability to load unsigned native code (because cmccdll.dll is a self-made coredll.dll wrapper; other files are signed by ms). That could be problematic even with tcb permissions
3) probably some policies should be changed.
1) Full read/write access to the whole filesystem - not a problem.
2) Developer-unlocked devices are allowed to do this, at least for DLLs. If they weren't, none of our native homebrew code would function (it's all unsigned). Not sure about EXEs though.
3) I think I can do this with the permissions I have - Heathcliff74 has mentioned mdifying the policies on his phone during WP7 Root Tools development - but I'd need to know which ones and what modifications are needed.
Hi guys. I want to discover my HTC7Pro hardware keyboard low level management to be able to customize any applications (my prepared filemanager etc.) to keyboard-only management, use smile key as ctrl etc. But, I could not use debugger correctly. Do you know, how I can see call stack and how can I step running processes? I can pause them, but I see everytime this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks, M.
GoodDayToDie said:
1) Full read/write access to the whole filesystem - not a problem.
2) Developer-unlocked devices are allowed to do this, at least for DLLs. If they weren't, none of our native homebrew code would function (it's all unsigned). Not sure about EXEs though.
3) I think I can do this with the permissions I have - Heathcliff74 has mentioned mdifying the policies on his phone during WP7 Root Tools development - but I'd need to know which ones and what modifications are needed.
Click to expand...
Click to collapse
2) yes, but it can be different for fully native exes (haven't checked further though).
3) the minimum required policies should be like those for built-in edm3.exe, ConManClient3.exe. The only difference is (again) absence of valid digital sign and it may prevent lvmod's authorization.
//Wondering if lvmod can be replaced (better to say, shadowed) without reflashing.
Martin7Pro said:
Hi guys. I want to discover my HTC7Pro hardware keyboard low level management to be able to customize any applications (my prepared filemanager etc.) to keyboard-only management, use smile key as ctrl etc. But, I could not use debugger correctly. Do you know, how I can see call stack and how can I step running processes? I can pause them, but I see everytime this:
Thanks, M.
Click to expand...
Click to collapse
I would rather say it isn't a good task for VS2008. It is meant to debug your libs/exes, not someone else's.
IDA always rocks but its wce debugger is currently not working, thanks to absent activesync connection.
ultrashot said:
I would rather say it isn't a good task for VS2008. It is meant to debug your libs/exes, not someone else's.
IDA always rocks but its wce debugger is currently not working, thanks to absent activesync connection.
Click to expand...
Click to collapse
Thanks for answer. Then I want to try debug my own applications. I foung your older post http://forum.xda-developers.com/showthread.php?t=1336137, which enables debugger using on custom ROMs, it is working good for me in WS 2010 Express. Then question: May I have opened VS 2010 Express with managed part + VS 2008 Professional with unmanaged part of any hybrid application to be able to debug it? How can I do it, when it is one application and process attaching does not work? Or those will two different process in one application, runnable independent? Or is possible to use VS 2008 for WP7 C# debugging? I am apologioze for probably basic questions. I am experienced C programmer, but totally new in mobile programming. M.
May I have opened VS 2010 Express with managed part + VS 2008 Professional with unmanaged part of any hybrid application to be able to debug it?
Click to expand...
Click to collapse
no, only managed part could be debugged (though, you can test your native library via native exe, but that's another story)
process attaching does not work
Click to expand...
Click to collapse
It was never working even in WM
Or those will two different process in one application, runnable independent?
Click to expand...
Click to collapse
both native and managed code run in the same taskhost context.
Or is possible to use VS 2008 for WP7 C# debugging?
Click to expand...
Click to collapse
no.
Thanks. I must learn more. If I understand, I can debug Silverlight, XNA and managed part of hybrid applications only in VS 2010 (unmanaged part debugging is impossible), native appplications in VS 2008 only.
Is normal to see more then one device in Registry viewer? I see today everytime only mobile, but now also desktop. On debugger launcher I have three different CoreCon IPs immediately now. Could not it be any attack from internet?
Is normal to see more then one device in Registry viewer?
Click to expand...
Click to collapse
Normal.
On debugger launcher I have three different CoreCon IPs immediately now.
Click to expand...
Click to collapse
that's because you can connect via different connection types. (such as wifi for example - btw, it is also possible, but you have to adjust ip every time)
Could not it be any attack from internet?
Click to expand...
Click to collapse
no.
This is amazing.
Thank you ultrashot.

[8.1] WinPE 64-bit en-US

Might be you need a "Windows 8.1 Rescue Disk 64bit" at some point. If you won't create such a WinPE by yourself, you might use the one I created by means of phantastic WinBuilder tool. Note, that this WinPE boots in legacy mode and only comes with legacy apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
• Requirements:
1. At least 1 GB RAM; the WinPE completely is copied to RAM and runs from therein.
2. A storage device with at least 500 MB; the WinPE currently is ~300 MB of size.
3. A VESA-compatible display device. Note, that screen resolution will be set to 1024x768 and colordepth to 32-bit.
• Network:
Wireless networking is not supported in WinPE, this WinPE uses TCP/IP and/or NetBIOS over TCP/IP to provide network access and support for standard network drivers. Hence connect the PC to a router using an ethernet cable before booting.
• How To:
» You burn the .ISO on CD/DVD/BD (use 2x speed).
» You direct your Windows 8.1 x64 computer to boot from optical storage device.
» You power off the PC.
» You insert the CD/DVD/BD.
» You restart your Windows 8.1 x64 computer.
If WinPE has successfully booted, you right click anywhere in the desktop to get the WinPE's MENU shown.
• Disclaimer:
This WinPE only was tested in VMWare Player. It comes with no warranty or official support - I will try to help with any bugs or issues that people report when I get chance but this is not in any way guaranteed. No guarantee of final success or absence of undesirable side effects is being given hereby. Any liability of any kind will be rejected. I cannot be held accountable for any loss of data that occurs as a result of using this WinPE, you use the programs included AT YOUR OWN RISK. Be aware in WinPE environment you are "nt authority/system", which is the highest level on a local system, above Administrator.
TO GET AN IDEA, WHAT A PROGRAM INCLUDED IS FOR, PLEASE VISIT ITS RESPECTIVE WEB-SITE.
This WinPE comes with no programs' documentation! Might be with next version of this WinPE.
• License, Use, Copying, and Distribution:
Because this WinPE compilation only is based on free softwares, it is licensed as Freeware and free to download and for personal and commercial usage.
• Trade-Marks and Proprietary Notices:
Parts of this WinPE contents might be protected by copyrights, trademarks, trade secrets, or other proprietary rights, and if so, these rights are valid and belong to the authors of the softwares injected in the WinPE. "Microsoft Windows PE 5.0" which this WinPE is built on, is copyrighted by Microsoft.
• Credits:
Misty, who provided an excellent basic WinBuilder-project ready to start with ...
BlueLife & Lancelot, who created the "Reg Convert PE ( RegCPE )" tool
• Version History:
2014-04-07
v2
ISO-Download: WinPE-8.1-x64-en-US-v2
2014-03-16
v1
For devices without an optical drive, it *should* be possible to format a USB stick, mark its partition as "Active", and then dump the contents of the disc image to the root of the flashdrive (note: not the image itself!)
Great work. Possible to add PowerShell?
Baltasar1 said:
Great work. Possible to add PowerShell?
Click to expand...
Click to collapse
Would be possible, YES, but I don't add it. Reason: MS PowerShell requires MS .NET Framework (~2GB) to be installed, too.
50+ downloads until this writing. No bug reports, wow. This encouraged me to spend further efforts in this project: result is version 2.
• Programs added:
TCC/LE, version 13.0.6.77
AOMEI Partition Assistant, version 5.5
Q-Dir, version 5.97 (March 24th 2014)
SumatraPDF, version 2.5.8665
SearchMyFiles, version 2.48
ESET SysInspector, version 1.2.402 !!! needs 38 MB RAM !!!
ODIN, released 2011-10-09
Calculator, version 2.6.0.0
7-Zip, released 2013-12-11
Agent Ransack, version 7.0.820.1
BOOTICE, version 1.3.21
TestDisk, version 6.14
CheckDisk, version 1.4
Could't add TrueCrypt, because no native 64-bit version of it exists.
---------------------------------------------
GoodDayToDie said:
For devices without an optical drive, it *should* be possible to format a USB stick, mark its partition as "Active", and then dump the contents of the disc image to the root of the flashdrive (note: not the image itself!)
Click to expand...
Click to collapse
Problem herewith is, that WinPE only detects the USB drive if you boot the computer with the drive connected. If you bootet WinPE from USB drive, then this USB drive isn't not useable for other purposes anylonger, means you can't use it for data transfer in either direction. If you decide to use another USB drive for data transfer then, if already running WinPE and you plug in such another USB drive, nothing happens. Hence also added:
Microsoft's DevCon utility
----------------------------------------------
• Shell modified:
Added "multiple-desktops" feature, you now have 3 desktops you can switch among
Reorganized the menu, perhaps a little bit less cluttered now
Added a desktop wallpaper, so one now recognizes when WinPE has successfully loaded
Download: See post #1.
Very good project I used de DVD with no problem for now.
Link is broken. Could you please update it again ?
update the link plz
plz update the link is broken
Could you reupload this file please ?

FRP BYPASS for S20 FE 5G Android 11 One UI 3.1

I would try to find the video that showed me, but after realizing it took me 3 weeks to find it and I really hate techno now...lol ill spare you the experience!!
***DISCLAIMER***
I did not create this tool and no its not a virus... please read the entire post before you do anything.....
This tool is for when you lock your self out of your own account and don't have the password, or the phone you used to two party authorization is not in service, you changed your number, your girlfriend threw it away, damn it my screen broke, you forget stuff easily, or maybe you didn't know that you bought a used phone that was locked and now your just stuck... Or you might be one of the few and proud local phone repair guys.....
IF YOU LIVE A LIFE OF CRIME AND YOU STOLE A PHONE OR ARE A PART OF A CRIMINAL ORGANIZATION RESELLING ON THE BLACK MARKET YOU ARE THE WORST OF THE WORST PEOPLE ON THE PLANET AND YOU DONT DESERVE THE AIR YOU BREATH.... DO NOT ASK QUESTIONS PERTAINING TO ILLIGAL ACTIVITY BECAUSE YOU WILL BE REPORTED......
PLEASE READ THE ENTIRE POST BEFORE YOU DO ANYTHING
You will need another Android at the end of the process with Android 10, OTG capability or a newer Samsung, S9 or better .. I successfully did this with a Motorola g7 plus as my 2nd phone...
This is a Windows 10 PC method..... if you don't have it get it
Create a new Samsung account on the website and setup two party verification
Download WinRAR https://www.win-rar.com/download.html?&L=0
I would try to find the video but after realizing it took me 3 weeks to find it and now I hate techno music!!
FRP tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Mod edit: DL link removed due to virus detection.
Disable Anti- Virus on Windows or you will scratch your head wondering where the download went......
Make sure you use WinRAR ONLY not 7zip gunzip anyzip because I dont know why but this is the only way to unzip and to execute the script
Make sure you got up to date samsung drivers and up to date adb blah blah installed
As far as I know this will work on ANDROID 11 ONLY!!!! I Began with ANDROID Q frp locked with out success, so I upgrade firmware from samfw.com
This should work with ANY varient of the QUALCOM snapdragon S20 FE
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U Free Download
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
I was on Android 10 so I factory data reset from stock recovery and flashed Android 11 with Patched ODIN
Odin 3.14.1 Patched (Modded) for windows - Odin download for pc​Share Odin3 Flash Tool: 0 Shares Facebook Twitter LinkedIn Copy Link More Now added Odin 3.14.1 Patched version for windows. It specially developed Samsung’s newer phone firmware flash with android 10. We assume this will be very useful, so we thought we would share it. Odin3 version 3.14.1 has...
Once flashed boot the phone and connect to WIFI the same WIFI the Windows PC is on
Unzip and Install the FRP tool with WinRAR ONLY
Disable the native Windows 10 antivirus (MAKE ALL GREEN CHECKS DISSAPPER)
Disable signatures verification from the FRP tool... it will ask you to reboot before running the tool.... DONT REBOOT YET
check anti virus again make sure its disabled
NEXT choose either of these methods to make sure signature verification is turned off...also has procedure to turn it back on when done
How to Disable Driver Signature Verification on 64-Bit Windows 8 or 10 (So That You Can Install Unsigned Drivers)​64-bit versions of Windows 10 and 8 include a “driver signature enforcement” feature. They’ll only load drivers that have been signed by Microsoft. To install less-than-official drivers, old unsigned drivers, or drivers you’re developing yourself, you’ll need to disable driver signature enforcement.
www.howtogeek.com
NOW REBOOT
It should have test mode listed on your desktop in the bottom right corner
GO to the windows security badge in task view area and check your antivirus status....there will be one its the main one turn it off
make sure phone is CHARGED FULLY powered ON, and connected to the same WIFI as the PC.... when u disabled signature it reset the Samsung drivers....
Connect to the PC with the best USB TYPE C cord you can...let windows set the phone up for file sharing (it prompt you just click on file transfer)... when it makes the windows connect noise and tells you setup is finished click the install button on the FRP tool....make sure you keep the phone screen unlocked and lit up... You will get a prompt on the phone click it to open up the youtube... click the account picture scroll to the bottom and there should be a link for PRIVACY POLICY click the link it will take you to the Real google search......ENTER THIS EXACTLY IN SEARCH BAR addrom click the first link it should say FRP tool 2021 or something similar
open galaxy store from the menu.....update the app if needed when its finished updating back out with back nav bar button...re-enter and search for Smartswitch install back out then open the settings app from same menu as before ... navigate to accounts and make sure there is nothing active.. if there is delete it... use the settings search bar and access Smartswitch.....
TIME FOR SECOND PHONE
on the other Android have smart switch from the playstore already installed and make sure the phone has only 1 GOOGLE account. It must be your Account that will be installed on the S20 FE... Make sure you are synced make sure its a clean reset phone no EdXposed, Magisk, or TWRP installed because its critical for the Smartswitch process...
LOG BOTH PHONES INTO SMARTSWITCH
The 2nd phone is the host and the receiver is the S20 FE
Send ONLY your GOGGLE Account AND DEVICE SETTINGS!!!! nothing more, thats all... I had no luck with OTG cable it didn't work trust me when I tell you choose the wireless method 1000% success.... once its done go to developer options and toggle usb debugging set a device pin or pattern make sure you install your Samsung account and Google account.... restore a back up from either cloud...IMPORTANT....
after the backup restores let the phone sit for about 5 seconds...lol.... factory reset from the settings menu.....when it boots back up its gonna be FRP locked AGAIN with your passcode....cheers...
And this worked on your device? I am a little bit sceptical about disabling antivirus. Suspicious
Maybe better to hide this guide, as it can be misused by thefts.
It_ler said:
And this worked on your device? I am a little bit sceptical about disabling antivirus. Suspicious
Maybe better to hide this guide, as it can be misused by thefts.
Click to expand...
Click to collapse
wouldn't they just reset the device rather than wanting to get into it as is ?
this is probably more use to the psycho girlfriend who wants to know who Janis is.
should this work with canadian model SM-G781W ?
3mel said:
wouldn't they just reset the device rather than wanting to get into it as is ?
this is probably more use to the psycho girlfriend who wants to know who Janis is.
Click to expand...
Click to collapse
FRP means Factory Reset Protection. You can probably guess what this guide is bypassing.
Ok, so you want people to download some random file, which VirusTotal shows like a billion different antivirus apps as infected?
Then you want people to disable their Windows antivirus AND driver signature verification?
And then you want people to use winrar(known to have security problems with scripts) to open a .7z file instead of 7zip, app which created that archive in the first place?
And then your instructions tell people to open youtube? right...
If anybody reading this thinks this works, please private message me because I have an amazing business proposition for a bridge for you!
Thread closed due to VirusTotal detection.

Categories

Resources