Tutorial for root Defy fw. 2.51.1 - Defy General

This tutorial is a step-by-step guide valid for fw. JRDNEM 2.51 , JRDNEM 2.51.1 and newest JRDNEM 2.59.0
To make the root is very important to have installed the drivers for you're Defy! You can be found it here -> www motorola com staticfiles Support Experiences Global_Drivers/USB_Drivers_bit_4.9.0.exe and here or h77p:// motofan.ru /files/soft/USB_Drivers_bit_4.9.0.rar -> https:// rsddownload motorola com /download/Motorola_Software_Update.exe .
Prepare the system:
The step 1 to 5 is needed just only the phone is not recognized by windows.
1.Install driver in windows if you don't have installed.
2.After installation restart windows and shutdown the phone.
3.Keep volume up button pressed and start phone, you appear a debug screen with this words ( Bootloader 09.xx - Battery OK - OK to Program - Connect USB data cable ).
4.When windows is started, connect phone with you're USB cable and now windows automatically install driver for it.
5.When the installation it's complete restart windows.
6.Download SuperOneclick 2.1 here -> www megaupload com /?d = 0GGUEBUI this software needs Microsoft .NET Framework version 2.0.
You can get it from http:// www microsoft com /downloads/en/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5
Root the Defy:
7.Connect phone to usb cable, now windows find you're phone.
8.Now you are going to Defy Settings / Application / Development and turn off "USB Debug"
9.Open the SuperOneClick as Administrator (right click Run as ..).
10. Press Root! (See attached image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
11.When appear on the screen "Waiting for device..." turn on USB Debug in the phone, and wait.
12.If everything it's ok, you appear a small banner "Device is rooted", and Now Restart the Defy.
Good Rooting At All!!!
News: For UNROOT follow this method on the post http://forum.xda-developers.com/showthread.php?t=955061

Thank YOU!!!!
...thank you so much!!! I've literally spent hours trying to figure out how to root my defy and I wasn't expecting this to work but it has so major props to you

zephyrteam said:
www motorola com staticfiles Support Experiences Global_Drivers/USB_Drivers_bit_4.9.0.exe
Click to expand...
Click to collapse
Looks like Motorola has removed this file from its site. Can you upload it to a site like rapidshare or one of the other file hosts out there?

you can chose the version 4.8.0 from here -> www motorola com /staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.8.0.exe

OK, I'll try the drivers from
www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.8.0.exe
with
www.megaupload.com/?d=0GGUEBUI
(clickable links are easier )

I'm post new link for driver version 4.9.0 in the main thread!!!;-)

zephyrteam said:
3.Start phone and press vol, you appear a debug screen.
Click to expand...
Click to collapse
Keep volume UP button pressed and start phone (volume up launches debug, volume down launches recovery mode).
zephyrteam said:
4.When windows is started, connect phone with you're USB cable and now windows automatically install driver for it.
Click to expand...
Click to collapse
I didn't see anything happening, but my phone got rooted anyway.
zephyrteam said:
6.Download SuperOneclick 2.1 here -> www megaupload com /?d = 0GGUEBUI
Click to expand...
Click to collapse
SuperOneClick needs Microsoft .NET Framework. The latest version is v4, but SuperOneClick wouldn't run with it.
I managed to run SuperOneClick with .NET version 2.0. You can get it from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5

ok... i'm add this issue in the main thread! ;-)

Worked for my defy, Thanks!

Worked for a treat my defy
UK sim free, fw 2.51.1, 2.1 android, rooted via Win7

SuperOneClick 2.1 worked when Z4Root would not
The SuperOneClick 2.1 method worked well.
I first tried the "noob guide" to root the defy with Z4Root. But no matter what I did it just would not work, I even went so far as to restore my Defy to factory settings and never could get it to work.
This was much easier than I expected and I have not had any problems with my Defy so far.
Next I downloaded the System Recovery App found here at XDA and it also ran smoothly without any problems and I backed up a copy to my SD Card.
Then I downloaded SetVsel from the Market for the Defy to overclock it, it comes with 3 preset Vsel settings for 300, 600 and 800. I kept the first two at 33 / 300 and 48 / 600 then increased the 3rd preset to a 52 / 1000 and the CPU now hits 1000MHz. There is a noticible boost in performance plus battery life is at least as good as it was before. I also ran the stability test just to see if there were any issues and it went well.
Then I downloaded Uninstaller for Root from the market and began deleting the preinstalled bloatware from T-Mobile one at a time and so far I'm not having any problems.
And then Titanium Backup just to be safe. The funny thing is that "after" all of this, now Z4Root works lol.
On the Quadrant Standard benchmark test I am averaging between 1000 and 1209 depending on what is running. And on the speed test I average around 9350 kbps download and 1110 kbps upload speeds, of course it depends on the time of day.
Overall, I have noticed much better performance and it appears to be stable. Thanks for the tutorial, between this and the YouTube walk through for SuperOneClick 2.1 it all went smoothly.

rooted successfully - thanks

Dont know if the way via the debug screen is really needed, but if it works for all, this is very helpful.
I did the "simple" superoneclick (without changing USB-debugging inbetween) and it also got root afterwards.
I had the original 2.1 (German version), which was rooted before with SuperoneClick for 2.1. plus Tenfars recovery installed.
After the OTA Update to 2.51.1. the rooting was just one click.
I only needed to install busybox again to make it work.
Dont know, if I just was lucky ...

The way with the debug screen is needed just only the phone is not recognized by windows! ;-)
A lot of people have so much problem for the recognized session, just this is the best way for all android phone!

Addictive Tips has copy/pasted this thread to their site: http://www.addictivetips.com/mobile/how-to-root-motorola-defy-with-superoneclick/ . They host the required files on their own server, so if any of the download links in this thread stop working there's a backup available.

On my defy I just enabled USB debugging, installed driver on Windows and run SuperOneClick, then I got root.

Going to try this when I get home...
European/german 2.51.1 defy that defies z4root like a mo...
Everything needs to be free(d)!

Finished rooting, but couldn't do it from any of my 2 windows 7 computers so I did it from an old windows XP computah and it worked like a charm.
I love it!

fw 2.51.1 French, 2.1 android, successfully rooted via Win7.
just a little problem... titanium backup does not see it has root access...

titanium backup finally works too !! I installed busybox purposed by itself in its help dialog and it worked !!
thanks a lot for the tutorial !!

Related

[APP][Update to any Firmware region via Kies2.0][SpoofFw][Kies2.0]

A new approach!
Spoof the firmware version on the device, to trick Kies2.0.
But as you might understand, messing with system files is always dangerous and the possibility for a brick is always present. Hopefully this will not occur I'm doing my best to avoid that.
You should not use this app if you cannot get into Recovery and/or Download mode! (3 button combo) As always when you modifies system files!
Remember to disable any lagfix before updating!
For everyones safety I would recommend doing a manual backup of /system/build.prop and the complete /efs folder including nv_data.bin
The app does this automatically to the internal SDCARD, but just to be on the safe side I would recommend a manual backup to the computer aswell.
There is three steps where a reboot is required after step 2. The app will tell you what to do.
Step1.
Backup everything. If this fails, step2 is not available.
Step2.
Set the new ProductCode and PDA. Reboot!
Step3.
Set CSC and Phone. Do NOT reboot. Connect to Kies2.0 and update!
This setting is not permanent and will go back to previous setting after reboot.
Remember to disable any lagfix before updating!
Done!
-------------------------------------------------------------
How to Restore
Press restore in the menu. Reboot required.
If something fails, please send me your logcat.
So here it is: SpoofFw - requires ROOT and BusyBox
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Online Market link
If you get problems to connect to Kies after you used this program, try remove the registry key "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB"
Please let me now if it works out for you.
If you like my work, please consider a small donation.
Thanks a lot for your patch
Hi,
I'm new to the forum and am very interested in your work, at the moment the file to "fool " Kies 2.0 has not worked for me. I have the version 2.2 of Android 9000XWJPB/I9000FOPJP3/I9000XXJPP/I9000XWJPB and product code FOP. Sorry for my english, i'm from Spain.
what is new in this ??
It does'nt entirely work. Tried and it shows me update available.
But when it supposed to start downloading new rom, it say that latest software is already installed in my phone.Then Kies resets and start over offering update again.
So, I guess it detects the real rom in the phone.
Nice patch, though. Maybe you can see what is the problem.
Thanks
Same here - I just posted in the "original" theme about kies registry patcher.
Kies finds update, and when i start upgrading, the phone disconnects, and then after 1s reconects back. I cannot upgrade.
oh crap. didnt try to actually download it. thought it would work. I'll have a look at it. sorry guys.
No panic
Obviously some can upgrade, some cannot. We are the first with this problem.
I have jpx. Could this cause problems?
Those of you who have tried the patch, can you please post your info from the registry and tell me if it worked or not. Include both product code, hidswver, softwarerevision and modelname.
For me, in the registry is still JPY everywhere, after apply patch.
PRODUCT code : GT-I9000HKDXEU
HIDSWVER: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
Model Name:GT-I9000
Software Revision: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
HTH....
Running Kies 2.0.0.11014_49
HIDSWVER I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO
Product Code GT-I9000HKDTMU
Model Name GT-I9000
Doesn't work unfortunately - it offers me an upgrade, appears to download the file then gives the Disconnected error.
I've also tried manually editing the registry as per kies 1.5 but no more luck.
I've tried on 2 PCs too.
HIDSWVER: I9000BUJP7/I9000GVD2JP5/I9000BUJP5/I9000BUJP7 (SofwareRev is same)
FW: I9000BUJP7/I9000GVD2JP5(CSC)/I9000BUJP5(modem)
PCode: GT-I9000HKDVD2 (VD2)
Kies: v2.0.0.11014_49
OS: Win7 Ultimate 64bit
I checked my registry but to no avail. Also tried deleting DeviceDB key to force kies into reconstructing it. It doesn't offer the fw upgrade option at all.
At least it's good to know someone is trying to develop a way to spoof kies 2.0. Did the patch work with any previous versions of kies 2.0?
I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?
Zajec5 said:
I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?
Click to expand...
Click to collapse
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.
LuffarJoh said:
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.
Click to expand...
Click to collapse
There is something like
getBasebandVersion, but I can't track RILRequest, how is is reading RIL_REQUEST_BASEBAND_VERSION... That could show us some file with baseband version maybe.
I have had some progress.
I have managed to change all necessary codes in the phone to be able to spoof Kies. This time I passed the step that the patch didnt!
Unfortunately it's not that simple, it requires root and changes system properties. But it's all reversible. I think I'll try to make an app of it during next week. First is a final exam on Monday.
watch this space.
well, it's much more fun to develop android application then study for an exam
I have successfully switched from XEN to XEE and to DBT.
I'm almost done, just some more bug testing. I'll probably release it tonight
Good news, wait for your release tonight.
luffarjoh said:
well, it's much more fun to develop android application then study for an exam
i have successfully switched from xen to xee and to dbt.
I'm almost done, just some more bug testing. I'll probably release it tonight
Click to expand...
Click to collapse
great news!!!
I have to push the release until tomorrow, I still have some fine tuning to do! Overall is works very well

[TOOL] WP7 Easy Backup Tool (BETA)

Hello XDA-Community,
I am back with a new tool for Windows Phone 7 (<3).
The WP7 Easy Backup Tool allows WP7 users to create or restore a backup on the easy way and without hacking skills. The tools wraps the Windows Phone Support Tools to create or restore updates, that means backups are 100% Zune compatible.
This software is still in development, but there is already an stable version.
I've tested with my HD7 and HD2 (depends on the ROM), more test devices would be nice.
This tool requires .NET 3.5, Zune 4.8.2345.0 and Windows Phone Support Tools
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Successful tested on:
HTC HD7 (original HTC ROM)
HTC HD2 (Back to the Future ROM, xmb Rom 7740.16)
HTC 7 Mozart
HTC Arrive
HTC Titan
Samsung i917
Dell Venue Pro
Samsung Omnia 7 (I8700)
Nokia Lumia 800
Samsung Focus S
WARNING: The Tool didn't cares about previous backups! Please save your backups as first step.
Your backup should be stored here: "%localappdata%\Microsoft\Windows Phone Update\"
WARNING #2: THE BACKUP PROCESS COULD LEAD TO A FAILURE ON CUSTOM ROMS! ZUNE AND ZUNE UPDATES NEED TO BE SUPPORTED BY YOUR CUSTOM ROM.
HINT: The backup process could take up to 1h depending on your device.
IF YOU STUCK DURING THE BACKUP PROCESS IT'S NOT NECESSARY TO HARDRESET. REMOVE YOUR BATTERY AND BOOT NORMAL. (Sorry rubbish ;()
Use this software at your own risk
Please give me feedback on bugs or feature requests.
You found a bug? Okay, I need a description, device informations and your Zune version to kill that thing
DOWNLOAD
If you get the message: "There was a known problem with your Windows Phone Support Tools. Do you want to open the Microsoft Knowledge Base to get fix?" follow this instructions! Otherwise you can download the Windows Phone Support Tools here: http://forum.xda-developers.com/showpost.php?p=20161548&postcount=40
This Tool does full backup how Zune?
Looks nice and simple!
minep said:
This Tool does full backup how Zune?
Looks nice and simple!
Click to expand...
Click to collapse
Thank you
Yes, its also full compatible to Zune. The tools uses similar mechanics. (Faking an update).
I'll use it. Before change registry values, you need use it!
Danke!
Thanks for the app although it seems to not be ready for prime time yet
I've tried to backup and it seemed to show progress while phone (having rebooted itself) was showin 'do not disconnect' graphics. After the progress bar has reached 100% the phone was still at 'do not disconnect' stage so I've waited 10 minutes and unplugged it. It was still showing the same graphics. So I rebooted few times to only see the same 'do not disconnect' thing. So (being a bit worried at this stage) I've pressed factory reset buttons combination (worked) then exited it and only then phone booted normally. I have Focus with 7720 firmware.
rubbish said:
Thanks for the app although it seems to not be ready for prime time yet
I've tried to backup and it seemed to show progress while phone (having rebooted itself) was showin 'do not disconnect' graphics. After the progress bar has reached 100% the phone was still at 'do not disconnect' stage so I've waited 10 minutes and unplugged it. It was still showing the same graphics. So I rebooted few times to only see the same 'do not disconnect' thing. So (being a bit worried at this stage) I've pressed factory reset buttons combination (worked) then exited it and only then phone booted normally. I have Focus with 7720 firmware.
Click to expand...
Click to collapse
Same thing. Had to pull batt out to get it to restart...
Sorry guys ;( Which Zune version you are running? I had no problems with 4.8.2345.0
MarcHoover said:
Hello XDA-Community,
This software is still in development, but there is already an stable version.
I've tested with my HD7 and HD2 (depends on the ROM), more test devices would be nice.
DOWNLOAD
Click to expand...
Click to collapse
notice the bold part
what ROM were u using on HD2?
Update:
+ Bugfix: Progressbar, no 100%-flapping before the process starts.
+ Text added: "IF YOU STUCK DURING THE BACKUP PROCESS IT'S NOT NECESSARY TO HARDRESET. REMOVE YOUR BATTERY AND BOOT NORMAL."
+ Buttons now locked instant after clicking "Backup" or "Restore". (Could lead to multiple backup / restore processes)
Please Re-Download if you want the update.
jcsy said:
notice the bold part
Click to expand...
Click to collapse
Yes, sir
jcsy said:
what ROM were u using on HD2?
Click to expand...
Click to collapse
Back to the Future - Updateable ROM by Yuki / XBMod
So this does a FULL backup? Will keep interop unlock, etc? Because my current backup/restore setup is really inconvenient. Would be great if this works .
Sent from my mwp6985 using XDA Windows Phone 7 App
anyone knows if its working with Toucht-It or DFT Roms?
lucas.scott said:
So this does a FULL backup? Will keep interop unlock, etc? Because my current backup/restore setup is really inconvenient. Would be great if this works .
Sent from my mwp6985 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Its a "FULL" backup (OS, messages, savegames, apps) except Zune content like music or videos.
Tried it with an HTC 7 Mozart, also restored and noticed that if you go into your messages and try sending a message to someone. The message does then not come up in the history. If you also get a message from someone, it doesn't save either. So it's like you have had no messages what-so-ever.
If that makes sense? Not sure if that is a problem with this tool.
Edit: I removed the battery, put it back in and booted it back up. Corrected the date and time and seems to be working again!
MattGarner said:
Tried it with an HTC 7 Mozart, also restored and noticed that if you go into your messages and try sending a message to someone. The message does then not come up in the history. If you also get a message from someone, it doesn't save either. So it's like you have had no messages what-so-ever.
If that makes sense? Not sure if that is a problem with this tool.
Edit: I removed the battery, put it back in and booted it back up. Corrected the date and time and seems to be working again!
Click to expand...
Click to collapse
Yepp, if you restore a backup your time will also be "restored". You have to correct it by yourself.
This seems similar to this one.
http://forum.xda-developers.com/showthread.php?t=1346276
Backup doesn't work on HTC Titan X310e
There was a restriction in the data flow.
There was a one way arrow with a red cross above the drawing of the usb cable.
ECKcornelis said:
There was a restriction in the data flow.
There was a one way arrow with a red cross above the drawing of the usb cable.
Click to expand...
Click to collapse
Hum,...
Okay, I need more information about your phone (ROM, WP7 Version) and your Zune version.
HTC HD7 Mozart DF Rom V3
After Backup phone not restart stock on boot screen after 5 min. i have diconect and battery remove and the phone is not running up to os i must install the rom new and i want to take the restore but restore doesnt want to work
Backup doesn't work on HTC Titan X310e
As you requested.
HTC titan x310e
WP 7.5 version 7.10.7720.68
Zune 4.8.2345.0

[ROM Package] [xda-devs] Windows Phone 7 USB Video

Windows Phone 7 USB Video
-------------------------
Released by: XDA Dev Team
-------------------------
With the software in this release it is possible to add functionality to a custom ROM that allows to switch the USB-port of a Windows Phone 7 device to Video Out and back to normal Zune sync. The desktop software can be used to display the video of Windows Phone 7 device on a PC. This also works for XNA software, so this allows to make full-size screen-captures of games too, by pressing "Prnt Scrn" while showing the video output on a PC. The desktop-software can also be used for demonstrations and presentations of Windows Phone 7 content.
Note:
When connected to the PC in Video Out mode you CAN'T sync any content to the phone or push apps to the phone. It will not show up in the Zune Client when in Video Out mode and you will NOT get Internet connection pass through either. An automatic reboot is required after every time you switch the phone from Video to Default mode or vice-versa.
Note:
The app that switches USB to Video Out on the phone also changes a registry setting that will slowdown the refresh-rate on the phone. That setting is restored when the USB profile is restored. If the setting would be left as it is by default, the USB traffic will be overloaded, which will result in much more lag, than a lowered refresh-rate. So, when the device is rebooted after changing USB to Video Out, be prepared to get a less smooth experience on the device. After changing USB back to normal, the device will respond as usual.
Requirements to show USB Video out on a PC
WP7 USB Video Out.rar https://hotfile.com/dl/169342947/0b8b7e7/WP7_USB_Video_Out.rar.html
Proper drivers on your phone.
HTC phones need a patched Qualcomm driver, because HTC has prevented the Video Out driver from running. The patched driver for 1st generation HTC's and for 2nd genration HTC's are included in this release. This patched driver needs to be added to the custom ROM.
Client Application on your PC.
Custom USB Driver manually installed on your PC (only tested on x86).
A High Speed USB Cable. Do not use over 10' cable or a USB extension cable. Extenders, even powered ones won't work. You must be directly connected to the PC with your 10' or shorter USB Cable.
Specifically for USB Micro we have only found this cable to work and thankfully it is very inexpensive. Use of any other USB Micro cable longer than 3 feet is not recommended and will most likely lead to demo failure.
Disable your PC's screen timeout. No Screensaver, etc.
Note:
The desktop drivers are not signed. That means that there will be issues running this on Windows x64. The get this running read instructions from Solution 2 here:
http://www.techspot.com/community/t...signed-drivers-in-windows-vista-7-x64.127187/
Cooking
Put "PkgSetting_USB2VIDEO" in your kitchen.
Put "PkgSetting_USB2VIDEO_HTCDriverfix_1stGen" only in your kitchen for 1stGen HTC.
Put "PkgSetting_USB2VIDEO_HTCDriverfix_2ndGen" only in your kitchen for 2ndGen HTC.
Enabling USB video out on the phone (ON THE PHONE)
From Start Menu swipe over to the application list and run "USB Video Out"
Answer Yes to enable USB Video out. This is a toggle.
When the phone boots up it is in Zune Mode which enables it to sync data with Zune Client software on the PC. You will need to toggle this to Video mode using the above steps to get video out.
Note: Toggling between Zune mode and Video mode requires the phone to reboot each time.
Setting up driver on the desktop (one time)
Make sure Zune is not running.
Your Phone must be flashed with a ROM that has video out bits on it, they must be enabled, and the phone must be on and plugged into your PC to continue. When the phone boots up the default setting is OFF for the video output.
Start -> Right click on Computer, select Manage
In "Computer Management" click on the Device Manager
Under "Other Devices"
Within the list of drivers Right Click on WM7VIDSTREAM driver, select "Update Driver Software..."
Choose Browse and point Windows to appropriate driver folder.
Approve the Unsigned Driver installation.
Starting application
Launch VidStream.exe.
This application does support disconnect & reconnecting of the phone's USB cable.
If a previous instance of VidStream.exe was running with the device connected, you will need to simply unplug and replug the phone's USB cable.
Press ESC to exit the PC Client application.
Re-enabling MTPz USB sync (Zune Mode)
Open "USB Video Out"
Answer Yes to enable MTPz
The device will reboot to make the changes effective.
We did it! :laugh: :highfive:
Hats off to my buddies from XDA Dev Team!
:victory: enjoy
HD2Owner said:
:victory: enjoy
Click to expand...
Click to collapse
Already
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thx, Good job:good:
Thanks
Good job, pals!
This is awesome. Thank you guys!
Can i rename "qualcomm_usbfn.dll" and modify my registry.For have the old driver if it do not works on HTC Titan?
Thank you very much my friend :good:
What's about nokia drivers? Me need to patch it, or not?
This major breakthrough should be highlighted in XDA News Portal. I really don't understand why not. Well...
Sent from my HD7 T9292 using Board Express
Nice ! This is awsome... Congrads on this great find !
Questions...
1. I'm running a custom rom currently, is it possable to add this with out rebuilding a rom and re-flashing ?
2. Is it possable to use a HTC (touch pro/TP2) Video out cable (with an adapter to make it to Mini USB)to connect to a TV or projector with this ?
nice job!!
Thanks for your hardworking
titi66200 said:
Can i rename "qualcomm_usbfn.dll" and modify my registry.For have the old driver if it do not works on HTC Titan?
Click to expand...
Click to collapse
Better not to play tricks with modules running in kernel space. Besides qualcomm_usbfn.dll is not somehow "horribly modified" - just missing functionality is enabled.
It works on Titan.
DavidinCT said:
...Questions...
Click to expand...
Click to collapse
Answers:
1. No
2. No
I hope Titan chef's include this in their next rom
Lumia 710 work fine!Thank you very much!:angel:
@AndrewSh
Thanks
edit
HTC HD2 work fine!

Android reversing mirror model rt01

Android 4.4 Reversing Camera Mirror With A10,A23,A33 CPU​
These mirrors come in many different flavours now. At time of edit post A33 x5 quadcore is the latest with 16GB. This newer unit can be rooted with kingroot apk version. I find I lose root after reboot for some reason. I haven't found a firmware for this mirror version as of yet. For some reason my mirror does not have a wifi antenna attached so poor signal unless 4 meters line of sight. Please becareful as from experience from buying 3 mirrors now, there can be huge differences to build quality even thou they look the same.
I'm not updating this thread with RT01 firmware anymore. Please check Baidu link below
Also need this to load firmware to TF/microsd
PhoenixCard_V310_20130618.rar
To load new firm run Phoenixcard - Select image - Insert TF card/ Microsd - Choose burn (Try until magic) - Insert Tf Card into mirror and shutdown - After mirror firmware loaded you must format to normal or Tfcard will flash mirror again on reset
You may also find your firmware here. Let me know if you can't download it(use iPad to view)
http://pan.baidu.com/wap/share/home?uk=4026862827&third=0
Yfgo.apk - Radar program (you need mirror with radar function)
Yfgo.apk
Thx to nyinyiwale
How to get root access:
Download this settings.apk and run it! Thanks to Nick Nick
Setup.apk (A23)
Now you should have developer options - Enable usb debugging
Now install on windows machine http://pdanet.co/ for android
Then install kingo root http://www.kingoapp.com/android-root/download.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications
Processor - Allwinner A13 Cortex A8 1.2GHz Dual Core
Smart systems - Android 4.4 OS
Screen - 5.0 inch HD 5 point touch screen
Diplay resolution - 800X480 pixels
DDR - Built in 512MB DDR 3
Nand Flash - Built in 8GB (systems will occupy 1.72GB )
External storage - Support Maximum 64GB TF card(not included)
Image Sensor - 5.0 million pixel HD camera, 350 degree rotate front lens
Lens angle view - Front 140 degree +back 120 degree
Video Resolution - Front: 1920*1080(30f/s)/HD1280x720(30f/s) - Rear: 640X480 30f/s
Video format - MP4
Picture format - JPEG
Compression - H.264
Speaker - Built in
MIC - Built in
External I/O port
1*USB 2.0
1*TF card port:
1* GPS port
1*AV IN (support auto reverse function)
Dimensions - Main product size: 310x90x20mm (L x W x D)
Just got this item off eBay. Url removed
Screen looks great. Touch screen works a treat. Nice and bright and good angle also.
There are a few things different listed that the seller on eBay has not listed correct.
It comes with android 4.4.2 And not 4.0
Has a A23 dual core and not A10
Kernel version 3.4.39
And it has a battery which would last a couple of days with no use - make sure you turn off wifi when not on power
This is a true android with some very basic functions missing. Starting it has no google services. So no google play store, no where to login to google account in settings. The launcher looks good(you can't change it) expect there is no access to app list. You can click on navi button - which holds no navigation software funny enough. Once inside the navi button you can hold on the screen and then it brings you up a app selection screen giving you option to add icons(still no gps map softwares)
Once connected to Internet apps start updating when you open them which is pretty cool.. There is an update option under andriod version screen which fails to find any update with an error(searches Internet for update or you can local upload file).
Overall I'm pretty impressed with this device and its speed. I was able to install google maps by browser. But once I closed it I could not open it again cause no icon to click on. Google maps ran a little bit sluggish but was acceptable. I'm now chasing the seller for a solution to google play store as the play store ask won't open after installing.
I was able to side load apps quite easily with the browser. Seems most work if the don't depend on play store or accounts being setup in google settings.
Synic gps software won't work as it wants to use playstore to download more files.
Es explorer works fine.
I don't think I will be able to get root access as there is no developer menu, but after clicking on firmware build number says you are already a developer
i have this one and have Google playstore, i have installed nova launcher without problem, all is fine
Hi, is it model rt01?
Do you have the same firmware 4.4.2 and specs?
Does it have an option to add google account inside android OS?
As mentioned above no google account in my OS which means no history in google maps. Very frustrating.
Could I also grab the seller as I my have to purchase a new one
Thank you if you can help
hello, i bought mine to this seller from Aliexpress, received in 8 days via DHL
http://fr.aliexpress.com/item/5-inch-Android-Mirror-Monitor-GPS-1080P-Digital-Video-Recorder-Rear-view-Camera/2021095296.html
The item has exactly the spécifications as described from top of topic and is a rt01 model, else allwinner A23 Inside, android 4.4.2 KitKat Inside
i have in native Google playstore and i have created my account without problem as soon as i powered up for the firs time the mirror
best regards
Thanks for your help appreciated.
Need to try a scab a firmware update as my seller refuses to speak with me now.
Might just buy what you got I think.
you can try to communicate via aliexpress with the store, seller is Mr wilson cao and ask him for a firmware, it's a pleasant person who respond to me very fast, also after my purchase for details. Try to say you're a friend of me (Superboost) and have same miror and you want the same OS, give a try, good luck.
---------- Post added at 06:38 PM ---------- Previous post was at 06:32 PM ----------
at this time i'm trying to root for install some progs. Framaroot = KO, kingroot not able to connect at his cloud for exploit. At this time not result. If i can, also put a twrp or other and save firmware and tranfer to you? Have an idea of rooting ?
I have seen a update.zip file for root on the net. I was thinking doing it that way.
I'll give it another go as I was more focused on gapps.zip before.
Do you have development option to activate usb debugging? I don't have this option, so it makes it hard for me.
That's why I suggested an update.zip method.
If you have usb debugging (lucky you) then try http://www.shuame.com/en/root/
Also sent a msg to your seller. I think he would have to be very nice to give time for nothing being a business man
I have not the "usb debugging option" and no more the menu security for the possibility to "accept unknown sources" option. I think it will be impossible to root the item.....
tell me if you have a response from seller, have a good day
I was going to try to enable usb debugging by a terminal command but gave up after I couldn't install gapps
Try this maybe
http://forum.xda-developers.com/showthread.php?t=893434
hello, i have installed usb drivers of the mirror (hold down volume button and plug USB) and found an unknown device, i downloaded livesuit pack V1.9 and in the usb directory, it found the driver.
Now i can lauch livesuit but it wait for an .img image file for flash.... that's all for this time.... perhaps a way for future rooting?, have a good day
Your seller is very nice.
Thank you also.. Now have to work out how to install
This is a link I found on google
http://pan.baidu.com/wap/link?uk=4026862827&shareid=3212962299&third=0
Link from your seller
http://en.mail.qq.com/cgi-bin/ftnEx...1e4459433274&t=exs_ftn_download&code=231c0681
hello, happy for you, i expect you can flash this firmware and having opérationnal Google on it.
This seller is very nice, i put it a 5+++++ stars on aliexpress
have a good day
It's a puzzle..
You have an img file.. And Phoenixcard..
Putting in sdcard and selecting startup it puts the android OS on the sdcard and you boot from that so you can test the image I suppose.
Could not see any google account. Also I have alarm next to the radio icon. When I put this one on I got the browser instead.
Can I ask under settings about tablet is your build number 20150410 ?
in the info i have : rt01-eng 4.2.2 KVT49L 20150410 test-keys
It's seem that is the same build than downloaded
perhaps puting applications in "download" folder of the program will put them on the image for flashing ?
Thank you so much. You are a legend.
Its as I figured.
running the phoniexcard program you select Startup to run off sdcard.. which is way slow.
So I took the plunge and hit production and it setup my sdcard which in turn updated my unit.
Now its usable and I cant thank you enough!
have you all you want in ? Google account possible? the next challenge : rooting...
---------- Post added at 01:24 PM ---------- Previous post was at 12:45 PM ----------
Because it's difficult to find this firmware, i put it on a Mega download
https://mega.co.nz/#!ZEwxzAyJ!HzowmA3-bVbcCdZpY7tHsQ5sV2kLQ8d6lwX6Y4Q0IXY
It include the program Phoenixcard for generate the bootable SD card for update firmware
for someone else who search
Yes rooting is on the cards now...
Just enjoying play store for the moment..
Plus I've noticed a huge increase in speed.
Large improvement in firmware need to keep eye open for future releases

FRP BYPASS for S20 FE 5G Android 11 One UI 3.1

I would try to find the video that showed me, but after realizing it took me 3 weeks to find it and I really hate techno now...lol ill spare you the experience!!
***DISCLAIMER***
I did not create this tool and no its not a virus... please read the entire post before you do anything.....
This tool is for when you lock your self out of your own account and don't have the password, or the phone you used to two party authorization is not in service, you changed your number, your girlfriend threw it away, damn it my screen broke, you forget stuff easily, or maybe you didn't know that you bought a used phone that was locked and now your just stuck... Or you might be one of the few and proud local phone repair guys.....
IF YOU LIVE A LIFE OF CRIME AND YOU STOLE A PHONE OR ARE A PART OF A CRIMINAL ORGANIZATION RESELLING ON THE BLACK MARKET YOU ARE THE WORST OF THE WORST PEOPLE ON THE PLANET AND YOU DONT DESERVE THE AIR YOU BREATH.... DO NOT ASK QUESTIONS PERTAINING TO ILLIGAL ACTIVITY BECAUSE YOU WILL BE REPORTED......
PLEASE READ THE ENTIRE POST BEFORE YOU DO ANYTHING
You will need another Android at the end of the process with Android 10, OTG capability or a newer Samsung, S9 or better .. I successfully did this with a Motorola g7 plus as my 2nd phone...
This is a Windows 10 PC method..... if you don't have it get it
Create a new Samsung account on the website and setup two party verification
Download WinRAR https://www.win-rar.com/download.html?&L=0
I would try to find the video but after realizing it took me 3 weeks to find it and now I hate techno music!!
FRP tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Mod edit: DL link removed due to virus detection.
Disable Anti- Virus on Windows or you will scratch your head wondering where the download went......
Make sure you use WinRAR ONLY not 7zip gunzip anyzip because I dont know why but this is the only way to unzip and to execute the script
Make sure you got up to date samsung drivers and up to date adb blah blah installed
As far as I know this will work on ANDROID 11 ONLY!!!! I Began with ANDROID Q frp locked with out success, so I upgrade firmware from samfw.com
This should work with ANY varient of the QUALCOM snapdragon S20 FE
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U Free Download
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
I was on Android 10 so I factory data reset from stock recovery and flashed Android 11 with Patched ODIN
Odin 3.14.1 Patched (Modded) for windows - Odin download for pc​Share Odin3 Flash Tool: 0 Shares Facebook Twitter LinkedIn Copy Link More Now added Odin 3.14.1 Patched version for windows. It specially developed Samsung’s newer phone firmware flash with android 10. We assume this will be very useful, so we thought we would share it. Odin3 version 3.14.1 has...
Once flashed boot the phone and connect to WIFI the same WIFI the Windows PC is on
Unzip and Install the FRP tool with WinRAR ONLY
Disable the native Windows 10 antivirus (MAKE ALL GREEN CHECKS DISSAPPER)
Disable signatures verification from the FRP tool... it will ask you to reboot before running the tool.... DONT REBOOT YET
check anti virus again make sure its disabled
NEXT choose either of these methods to make sure signature verification is turned off...also has procedure to turn it back on when done
How to Disable Driver Signature Verification on 64-Bit Windows 8 or 10 (So That You Can Install Unsigned Drivers)​64-bit versions of Windows 10 and 8 include a “driver signature enforcement” feature. They’ll only load drivers that have been signed by Microsoft. To install less-than-official drivers, old unsigned drivers, or drivers you’re developing yourself, you’ll need to disable driver signature enforcement.
www.howtogeek.com
NOW REBOOT
It should have test mode listed on your desktop in the bottom right corner
GO to the windows security badge in task view area and check your antivirus status....there will be one its the main one turn it off
make sure phone is CHARGED FULLY powered ON, and connected to the same WIFI as the PC.... when u disabled signature it reset the Samsung drivers....
Connect to the PC with the best USB TYPE C cord you can...let windows set the phone up for file sharing (it prompt you just click on file transfer)... when it makes the windows connect noise and tells you setup is finished click the install button on the FRP tool....make sure you keep the phone screen unlocked and lit up... You will get a prompt on the phone click it to open up the youtube... click the account picture scroll to the bottom and there should be a link for PRIVACY POLICY click the link it will take you to the Real google search......ENTER THIS EXACTLY IN SEARCH BAR addrom click the first link it should say FRP tool 2021 or something similar
open galaxy store from the menu.....update the app if needed when its finished updating back out with back nav bar button...re-enter and search for Smartswitch install back out then open the settings app from same menu as before ... navigate to accounts and make sure there is nothing active.. if there is delete it... use the settings search bar and access Smartswitch.....
TIME FOR SECOND PHONE
on the other Android have smart switch from the playstore already installed and make sure the phone has only 1 GOOGLE account. It must be your Account that will be installed on the S20 FE... Make sure you are synced make sure its a clean reset phone no EdXposed, Magisk, or TWRP installed because its critical for the Smartswitch process...
LOG BOTH PHONES INTO SMARTSWITCH
The 2nd phone is the host and the receiver is the S20 FE
Send ONLY your GOGGLE Account AND DEVICE SETTINGS!!!! nothing more, thats all... I had no luck with OTG cable it didn't work trust me when I tell you choose the wireless method 1000% success.... once its done go to developer options and toggle usb debugging set a device pin or pattern make sure you install your Samsung account and Google account.... restore a back up from either cloud...IMPORTANT....
after the backup restores let the phone sit for about 5 seconds...lol.... factory reset from the settings menu.....when it boots back up its gonna be FRP locked AGAIN with your passcode....cheers...
And this worked on your device? I am a little bit sceptical about disabling antivirus. Suspicious
Maybe better to hide this guide, as it can be misused by thefts.
It_ler said:
And this worked on your device? I am a little bit sceptical about disabling antivirus. Suspicious
Maybe better to hide this guide, as it can be misused by thefts.
Click to expand...
Click to collapse
wouldn't they just reset the device rather than wanting to get into it as is ?
this is probably more use to the psycho girlfriend who wants to know who Janis is.
should this work with canadian model SM-G781W ?
3mel said:
wouldn't they just reset the device rather than wanting to get into it as is ?
this is probably more use to the psycho girlfriend who wants to know who Janis is.
Click to expand...
Click to collapse
FRP means Factory Reset Protection. You can probably guess what this guide is bypassing.
Ok, so you want people to download some random file, which VirusTotal shows like a billion different antivirus apps as infected?
Then you want people to disable their Windows antivirus AND driver signature verification?
And then you want people to use winrar(known to have security problems with scripts) to open a .7z file instead of 7zip, app which created that archive in the first place?
And then your instructions tell people to open youtube? right...
If anybody reading this thinks this works, please private message me because I have an amazing business proposition for a bridge for you!
Thread closed due to VirusTotal detection.

Categories

Resources