M3100 Upgraded to WM6 - Camera Broken - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi all,
I upgraded my Orange M3100 to WM6 a couple of days ago - it was a fairly pain free process and I got all my settings etc loaded on within minutes thanks to the community here
However, the one thing that doesn't work is the camera. When I start the app it all loads but the picture isn't right at all - lots of 'static' and diagonal lines so you can't make anything out. Has anyone had this before or have any idea on how to fix?
Not sure what ROM I started from but it I got the phone from Orange about 8/9 months ago. The OS was WM5 with AKU2.
I applied the HTC ROM HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe
I won't go back - WM6 is far better than WM5, but I wouldn't mind getting the camera working too
Any help appreciated!

PsychicMonkey said:
Hi all,
I upgraded my Orange M3100 to WM6 a couple of days ago - it was a fairly pain free process and I got all my settings etc loaded on within minutes thanks to the community here
However, the one thing that doesn't work is the camera. When I start the app it all loads but the picture isn't right at all - lots of 'static' and diagonal lines so you can't make anything out. Has anyone had this before or have any idea on how to fix?
Not sure what ROM I started from but it I got the phone from Orange about 8/9 months ago. The OS was WM5 with AKU2.
I applied the HTC ROM HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe
I won't go back - WM6 is far better than WM5, but I wouldn't mind getting the camera working too
Any help appreciated!
Click to expand...
Click to collapse
In my Trinity happened the same to me. I solved removing the battery for a few minutes.

Excellent - that sorted it!
The simplest solutions are always the best - it's the one thing I never do once the SIM is in!
Many thanks for the help!!

Camera - Picture garbled with static
PsychicMonkey said:
Excellent - that sorted it!
The simplest solutions are always the best - it's the one thing I never do once the SIM is in!
Many thanks for the help!!
Click to expand...
Click to collapse
Perhaps that issue shall be put into a sticky item or as a FAQ item. The very same thing happened when i updated to Shap's 3.54b ROM. I knocked it, did soft resets but it still showed these garbled pictures. After removing the battery for two or so minutes all was restored to normal operation. Very funny but so far no explanation for that behaviour.

Related

What THE? Hardware? Orange Firmware? Hard-resets-a-go-go...

Following a couple of previous spontaneous hard-resets, my SPV2000's now developed a liking for it, and I've got a completely repeatable hard-reset issue...
All I need do is press the telephone "Green" button!
What's odd is that if, following the hard reset, I hit the green button after the PDA's started up, but before all the Orange McGuffery installs, the phone just pops up fine. Soon as the Orange stuff's installed, it's back to green=hard reset.
WTF? Anybody else had anything similar?
If that is the case, it would seem that something in your EXtRom is the cause.
I suggest you try updating your rom, or just generally cooking your Extended rom.
Instructions on working with your extended rom are here:
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
TheLastOne said:
I suggest you try updating your rom, or just generally cooking your Extended rom.
Click to expand...
Click to collapse
Is that as scary as it sounds?
BTW - I've just tried to demonstrate this utterly-repeatable behaviour and... it's working as it should. <cries, bangs head on table>
I had a problem with my first M2000 in that it wouldn't soft reset. Whenever I tried it would just stall and would take over an hour with the sim card out before it would work again.
Finally get a replacement and I found the rom was insanely old. After a couple of questions in the upgrade folder I *just* flashed the phone with the latest rom and a slightly modified extended rom. While it does look tricky, its not.
Look here for more...
http://forum.xda-developers.com/viewtopic.php?t=19354
xyon said:
I had a problem with my first M2000...
I found the rom was insanely old.
Click to expand...
Click to collapse
Thanks - I seem to be fairly recent, though :-
Operator 5.31.1.124
ROM Version 1.31.00 WWE
ROM Date 12/13/04
Radio Version 1.06.02
Protocol Version 1337.38
ExtRom Version 1.31.124 WWE
AdrianC said:
BTW - I've just tried to demonstrate this utterly-repeatable behaviour and... it's working as it should. <cries, bangs head on table>
Click to expand...
Click to collapse
And it's back at it.
The phone was ringing, I pressed "Green" to answer it, and got a hard reset. Restored the backup, pressed "Green", and got a hard reset.
This is getting VERY depressing.
Has nobody ever experienced similar? <whimper>
<UPDATE>
It gets worse! The f**king thing's now wiped my contacts and calendar in Outlook.
Excuse me, I'm just off to take to drink.
It would be worth you trying to upgrade the radio to v1.08.00.
My SPV had the audio problem and it seems to have cured that (tho I haven't re-installed much of the 3rd party s/w I had on there yet) so maybe it will help you too.
I upgraded to v1.10.00 initially (from v1.06.00), but couldn't get my wifi link to work properly. I then tried v1.08.00 and everything seems fine.
Me too, just started this week
I am also having spontaneous hard reset problems with my pda2k. I have been using it for about 6 months and for at least two months with all the sw I now have on it. When I press the power button to bring it back from sleeping it starts the "time to align your touch screen" crap. I am fairly sure it is NOT my ROM but in case anyone needs to know that:
ROM: 1.22.00 WWE
Radio 1.06.00
Ext ROM: 1.22.162 WWE
The only other remote possibility I can think of it some combination of the aftermarket 2200 mAh battery combined with the very high side seat bolsters in my new car. Perhaps I am twisting or stressing my unit in my front pocket when getting into or out of my car and that causes a momentary loss of contact with the battery contacts. I have tried to duplicate that with my hands but have not been able to. I guess I will not put it in my pocket for a while to continue testing. To the fellow who lost all of their contacts. I sympathize! That is why I set my ActiveSync to NOT actually perform any updates. I know many like the features of AS but it is not transparent, bidirectional enough nor stable enough for me to embrace. I use Sprite for backups instead and keep the data on my pda2k as "primary". Any more insight on such new and random hard resets is appreciated.
Good info on Himalaya forums also
http://forum.xda-developers.com/viewtopic.php?t=12802

Quick question for those of you using WM6!

Hi all,
As many of you have heard (or experienced), many Hermes units seem to exhibit less than stable behavior with the production WM5 ROM, or even some of the cool ones here.
Browsing the other forum, we are all to familiar with:
1 - Camera taking black pictures
2 - SD Card not recognized
3 - System hangs
4 - Unit gets very hot and drains battery
5 - Using the alarms is out of the question due to reliability
etc.
After two months of testing, I have two choices:
A - Go back to my Wizard 8125.
B - Move on up to WM6, and see if these issues will be resolved.
My question for those of you have taken the WM6 leap is:
"If you have experienced annoying system hangs, battery drains, and so forth, with WM5, have these issues been resolved when you upgraded to WM6?"
I want so badly to stick with the Hermes, and I'd love to learn all about the various WM6's ROMs... But not if this unit will be as unstable as before.
Any quick thoughts would be appreciated.
I'm ready to hit this forum and the wiki, and learn all there is to know about WM6... but NOT if this unit is still going act up.
I eagerly await your quick replies!
To be honest, I think WM6 is more stable overall compared to WM5 on my 8525.
I also have an 8125, and I have WM6 on that as well. The differences in functionality and the nice new interface are well worth it. The key (in my opinion) is to pick a ROM without all the extra 'garbage' added in, and be careful about the 3rd party apps you add. The core OS is very solid.
Generally speaking WM6 is faster with less hangs.
My only gripe with it is that after you have about 300 sms messages, typing gets slow .... like really delayed ... to solve this i turned the Autospeller thingy off, and it seems to be working flawlessly now!
Compatability is great, it actually just WORKS! .... *cough* most of the time *cough* ... no seriously it rarely hangs, and only the really old applications don't seem to run.
Alarms, christ don't get me started ... i personally just add a calender entry, with the alarm function turned on, it always works and reminds me 15 mins earlier than the desired time
My unit only gets hot while in my pocket a lot or while charging ... i have radio rom 1.41 and the battery life is good, but not as good, i advise 1.40 (for my device it worked best)
SD card not being recognised? never had that problem with WM6
Camera taking black pictures? ... well moving it out into the light generally helps, but out of 300 pictures so far none have been black!
i've also noticed that boot times are slightly quicker
and using IE is MUCH faster and smoother
WM6 is more visually pleasing and is smoother with less hangs. I'm using Sleuth's VARIANT of LVSW ... and its good, i'm an anti-black guy, Black just doesnt do it for me, too unreliable (IMHO!) but well done to JJ for it all, i'm not knocking him, just my personal experience
dropped calls or missed calls are a thing of the past with WM6, i suffered SO MANY during WM5 ... also the lack of OEM images is good, byebye orange customisations horay!! (backup your extended rom 1st, it might be useful later on)
i completely agree with the above statement.
WM6 is great. Haven't had any problems with it. but choose your ROM carefully. I use LVSW, and tried Black Dymond. Both were great, i personally had better luck with LVSW. Radio 1.41 seems to be working well for me, I haven't tried 1.40, so i can't speak to the battery life. make the WM6 jump. you won't be sorry.
WM6 works for me
I had some of the problems you described with WM5 that came with my JASJAM. I have since upgraded to WM6 using the Elf version of LSVW. It works very well for me so far. The only thing to watch out for is that after installing the WM6, it somehow changed the device id and my WebCamera Plus app would not activate anymore. I have to call the Ateksoft to issue me another activation code.
bchau said:
I had some of the problems you described with WM5 that came with my JASJAM. I have since upgraded to WM6 using the Elf version of LSVW. It works very well for me so far. The only thing to watch out for is that after installing the WM6, it somehow changed the device id and my WebCamera Plus app would not activate anymore. I have to call the Ateksoft to issue me another activation code.
Click to expand...
Click to collapse
There's always going to be these small problems with an upgrade, but i think it's still agreed that WM5 < WM6
Hey hey!
These first five posts are VERY encouraging!
I am starting to get excited about it now...!
I'll wait to see who else can offer their opinions.
Thanks guys for the great news!
Michael_514 said:
Hey hey!
These first five posts are VERY encouraging!
I am starting to get excited about it now...!
I'll wait to see who else can offer their opinions.
Thanks guys for the great news!
Click to expand...
Click to collapse
No one elses opinion matters.
My only regret with WM6 is not taking the plunge sooner. See my signature for my configuration.
I am using black dymond 3.5 for past two weeks now and so far it's just rock solid and fast. No hang ups. Quick response to buttons / commands. No drop calls. Smooth operations. Nice visual interface. No complaints what so ever.
My prior cingular rom was stable but too slow and clumsy.
Anybody who is confident in performing upgrade should do it especially as now the risk of bricking the device is very low with Hard SPL 2.10 Olipro.
My 2 cents
Michael_514 said:
Hi all,
A - Go back to my Wizard 8125.
Well, I must say that my experience has been awsome with many of the roms on my 8525 especially JJ's stuff, yes I am a devoted black follower . My experience with the wizard or 8125 was horrible, never modified it at all so i don't know how it does otherwise but I thought it was a piece of ****e.
In conclusion my advice is go wm6 and you will have a new addiction. It is faster, more memory and of course the many other perks like when you get to show your friends that your already runnin wm6 and their stuck with 5
Just follow the steps hard spl, radio then rom and you should be just fine.
I almost forgot, the only times I have experience problems/ instabilities was when I installed things to storage card rather than main memory.
Click to expand...
Click to collapse
I have SoftBank X01HT... I've just upgraded my ppc to Black diamond 3.5 and it works perfect... But I still had the same problem with capturing image in the dark place and it comes up with black picture.. the flash doesn't help at all.. it seems like it's not functional... I hope someone could help me with this... Any Advice? Please feel free to tell me.. I'm waiting.. thanks in advance....
Okay, guys!
I am sold!
I will do my readings; check out the various ROMs, and away I go!
And of course, Hard SPL is a must!
And I agree with the post a few posts back... I am all for a less bloated ROM.
I use my PPC for very specific tasks (Adobe Reader, Outlook, GPS, phone,voice command)... and the less junk/crap/freeware/shareware/malware/utils/bloatware/games I have installed, the better.
I will do some investigating, and I shall take the plunge!!!
Thanks!!!
Michael_514 said:
Hi all,
As many of you have heard (or experienced), many Hermes units seem to exhibit less than stable behavior with the production WM5 ROM, or even some of the cool ones here.
Browsing the other forum, we are all to familiar with:
1 - Camera taking black pictures
2 - SD Card not recognized
3 - System hangs
4 - Unit gets very hot and drains battery
5 - Using the alarms is out of the question due to reliability
etc.
After two months of testing, I have two choices:
A - Go back to my Wizard 8125.
B - Move on up to WM6, and see if these issues will be resolved.
My question for those of you have taken the WM6 leap is:
"If you have experienced annoying system hangs, battery drains, and so forth, with WM5, have these issues been resolved when you upgraded to WM6?"
I want so badly to stick with the Hermes, and I'd love to learn all about the various WM6's ROMs... But not if this unit will be as unstable as before.
Any quick thoughts would be appreciated.
I'm ready to hit this forum and the wiki, and learn all there is to know about WM6... but NOT if this unit is still going act up.
I eagerly await your quick replies!
Click to expand...
Click to collapse
Hi, I have similar problems. I am trying to find out what's going on and the symptoms are like you say: battery drains too fast. Let's say it the battery gets hot, there's something wrong. If you measure the current usage with ACBPowerMeter you will see a high load, like 300-400ma, even with all stuff off, radio off, wifi off, incoming beams off, bt off etc, nada. Now, if you pull out the battery, leave the device the some hours, then start again, power it up, activate GSM and everything, you should be luck and see a current of maybe as low as 30-60ma, even with full brightness on the display. And one time it was okay the whole day, but then all of a sudden, maybe after I hooked up with Activesync or got an SMS, it's gone bananas again.. sigh.. There's gotta be something strange that's completely wrong. I've tried many radios no difference, I've tried bandswitch to limit to GSM only as I live in a area with maybe not super quality 3G signal, did not sort out the problem yet. I had WM6 from LVSW 19-05-2007 with all kinds of radios, then moved on to Pro Black, same problem, but will no try black dymond as someone else mentioned problem was gone with that ROM.
Please all, anyone else with these problems? Any good ideas what this can be? If the device is off for a long time, and I mean off as in battery pulld out, what difference does that make to having the battery off a short while, let's say some minutes? Is there some memory-stuff here? My device is just a week old, never wanted to use a native language WM5 that was in it, hoping this problem will be fixed..
thanks
Update:
I happened to purchase a faulty device!!! There was indeed a HW error on my brand new device so I got it swapped with another one that works. Not all problems are SW-bugs..
I use WM6 on both my 8525's without significant probs; battery drain seems less with radio v.1.38 than 1.40 or greater although use Band Switch to keep phone on GSM when not cruising the net; initial boot up is faster; I've not had overheating probs, no micro SD card issues . Wish I'd gone to WM6 much sooner, but I think having the Cingular 8525 makes a big difference as well.
My battery gets hot and discharges too quick even with radio off. I've tried all radios, am at 1.34 now, will try the 1.43 later tonight if I am able to fully charge battery quick enough... The thing is, if I remove battery for some hours and start over, it's okay, 40ma, radio on etc. Then, at some random point in time, the phone can just lay on the table untouched, it starts consuming battery as crazy, 300-400ma, measured by ACB Power Meter. It's dricing me nuts... I've tried to kill processes, to watch what's going on... I don't have a clue yet, except from there's something "running wild"..
Update:
I happened to purchase a faulty device!!! There was indeed a HW error on my brand new device so I got it swapped with another one that works. Not all problems are SW-bugs..
Hi all!
Okay, I am taking the plunge!
I think I'll stick with Radio 1.40, which I have instealled. Hard SPL is also installed...
...so, the only decision is to figure out which ROM!
I have rounded the choice down to two, based on what I've read.
I'm either gonna go with LSVW or Elf's version of LSVW.
Both are downloaded and sitting on my hard drive, ready to roll.
I just hope I can still use PocketMirror; iGuidance; and spb Pocket Plus.
We shall see!!!!
Any final suggestions are welcome!!!
Thanks!
What have you got to lose?
Just follow MrVanx's guide and enjoy it.
Unwired,
You actually bring up an EXCELLENT question!
"What have I got to lose?"
The simple answer: Time!
As much as I enjoy my hobby that involves tweaking PC's, PocketPCs, laptops, gadgets, and so forth...
...I am an attorney and I do run a business.
This means my time is very important and quite valuable to me.
For every hour I spend tweaking; resintalling apps; customizing e-mail settings; testing the phone; resyncing my business contacts with PocketMirror; researching the proper registry hacks....
...that is an hour I lose making MONEY!
So... As much as I would lllllllove to play with and test single new ROM and its variant, and as much I enjoy spending my day enjoying playing with the latest and greatest operating systems...
It kills me when I can't service clients, and when I can't run my business, because I am busy YET AGAIN(!) resintalling my PocketPC.
That's why I love getting opinions before I move ahead...!
So there ya go... I have no time to lose!
GilesTheAlmighty said:
Generally speaking WM6 is faster with less hangs.
My only gripe with it is that after you have about 300 sms messages, typing gets slow .... like really delayed ... to solve this i turned the Autospeller thingy off, and it seems to be working flawlessly now!
Click to expand...
Click to collapse
Now i have arround 700 sms in the Inbox and about 500 in sent items, and typing works good for me, with autospell on... i keep copy of all SMS i send/receive since i get my first pda, my loved Wizard...
GilesTheAlmighty said:
Alarms, christ don't get me started ... i personally just add a calender entry, with the alarm function turned on, it always works and reminds me 15 mins earlier than the desired time
SD card not being recognised? never had that problem with WM6
Camera taking black pictures? ... well moving it out into the light generally helps, but out of 300 pictures so far none have been black!
i've also noticed that boot times are slightly quicker
and using IE is MUCH faster and smoother
WM6 is more visually pleasing and is smoother with less hangs. I'm using Sleuth's VARIANT of LVSW ... and its good, i'm an anti-black guy, Black just doesnt do it for me, too unreliable (IMHO!) but well done to JJ for it all, i'm not knocking him, just my personal experience
dropped calls or missed calls are a thing of the past with WM6, i suffered SO MANY during WM5 ... also the lack of OEM images is good, byebye orange customisations horay!! (backup your extended rom 1st, it might be useful later on)
Click to expand...
Click to collapse
Really the difference is not only the ROM you use, but what you do with the ROM...this causes ppl talking about one ROM so quick and other ROM so slow, if you take a search, someone (don't remember) make a speed test after HR every ROM, and the results shows the ROMs aren't so different.
Of course if you havn't time for this, this isn't your forum
Regards.

LVSW_Trinity_WM6_v2.0.1.1 - Install Issues

Hello all,
I'm a new user, and quite new to PDA's and Smart Phones.
I found this forum while looking to see if the Trinity would be releasing WM6.
I've looked at the LVSW_Trinity_WM6_v2.0.1.1 sticky thread at the top of this page and I downloaded the following from that thread;
HARD-SPL
GSM_1.41.00.11
20070527_Trinity_WM6_v2.0.1.1
I did them in order, the first two without any issues.
When I came to install the 20070527_Trinity_WM6_v2.0.1.1,
I get to where the progress bar is and activesync turns off as the device switches to the multi-coloured lines screen, an error pops up saying that it could not find the device. Although it clearly has because I had to answer yes (on the device a few steps ago) to install the ROM.
As soon as it kicks in to start installing and the screen goes coloured it just disconnects every time.
Any help would be greatly appreciated!
If you need any more information please let me know and I'll endevour to find the correct info for you. (still learning my way around the phone).
ps. before I started this I all ready had the latest WM5 ROM from HTC on the device as I have only just bought it, when I checked at HTC and went to install their latest version it turned out that version was all ready installed. (don't know if that helps).
This sounds like regular behaviour to me.
Do you let it stay in the multicoloured screen (bootloader mode this is) and run the romupdate again? That's what I need to do with mine.
RaindancerAU said:
This sounds like regular behaviour to me.
Do you let it stay in the multicoloured screen (bootloader mode this is) and run the romupdate again? That's what I need to do with mine.
Click to expand...
Click to collapse
Weird, I thought it needed an Activesync connection to do this, but I took your advice and it worked great, thanks allot!
Hello again,
So, I've been running WM6 for a few days now and I've noticed a few issues on my device.
I've installed the following;
HARD-SPL
GSM_1.41.00.11
20070527_Trinity_WM6_v2.0.1.1
My issues are/were;
Camera would not initilize - FIXED - Found thread on forum about removing battery, this cured it for me.
Battery drains quicker - UNRESOLVED
Media player sounds allot quieter - UNRESOLVED
Appart from these three issues (one of which I found a fix for) everything is great.
Are there any fixes for the above issues? Or is it something only I am experiancing.
Thanks allot for the help and a good release.
There is a fix for the battery drain in one of the threads in this WM6 forum and there is also the bass fix somewhere around here. If I wasn't a tad busy atm I'd have another look for them but IIRR they're easily found with a search
Hi, I found both of these, but for the mon_rus version, can I use those on this version?
Many Thanks
Well I found the transcriber, but no fix for the rubbish sound on my trinity and wm6.
Is it possible to go back to wm5? I hope so as I use it's mp3 allot!

Blank Screen of Death [BSoD]

Hi all.
I have recently flashed my Herm to have the fantastic Black MAJIK rom. All went very well and I was pleased with the rom. I did have issues with the wireless not working and also with the blank screen detailed below.
When HTC released the update for WM6 for the TyTn, I decided to flash to that rom and give it a try. Again, works well, although I had to flash back to Radio 1.38 to get the Bluetooth to work properly with my Jabra headset. (I am on Orange in the UK - have not tried 1.43, as could not find it!)
The big problem is this :- randomly (could be 6 hours, could be ten minutes), the phone does not wake up from sleep. The lights are still flashing (I have not tried calling the phone - I will do that next time), but it will not wake up. No ActiveSync at all.
Soft reset is the only viable option.
Does anyone know a fix for this? (Yes, I have roamed through a number of forums and tried the link for 'DisableSyncSchedule', but that did not work.)
I have tried to re-flash the rom a few times, even soft-reset before the HTC stuff installs, stopped GPRS traffic and made sure that the IMAP does not connect. Whatever I do, the problem persists.
I have installed the following: HTC TyTn rom:
- SPB Diary
- SOTI Controller
- mfrazz CommManager
- WMG 3G Video Black Keypad
- GreenBatteryFix
- HTC X-Button
- Pimp my Black
I am loathed to revert to WM5, but if that is the only way foreward, then I might need to.
Any help would be superb!
One other thing
Sorry, meant to say that I am currently running with just the base HTC rom and nothing else installed. Let's see how that goes.
First, The radio should not have anything to do with bluetooth. This is the radio rom for cellular calls, not the BT radio.
BSoD question: Do you have a media card? Have you installed apps on the media card? There have been issues with the media card falling asleep. I had issues in the past installing applicaitons on the card. As make sure that you configure mail NOT to store messages on the media card.
Next....Uninstall all applicaiton that you have installed. Do you still have the problem? IF this fixes the problem, reinstall apps 1 at a time untill you figure out which is causing the problem.
I do have a memory card installed, but no apps are installed from it and the mail attachments are not stored on the card but in the memory. I have recently reset the mobile and have noting installed (not even ext rom) and have only set up mail, sync'd and configured for Orange.
Interesting about the radio having no affect, as it made the Jabra work - no other changes made. (I have re-flashed since then, but still using 1.38 radio rom.)
So I get this all the time, I don't have an SD card - so its not an SD card issue.
I've got 2 Tmobile MDA Vario II's and ever since upgrading from the stock Tmobile rom the phone will hang with a black screen but the message light will blink. If I put the phone in flight mode it never does it.
Its happened on the following roms:
XDA Mobile / Faria's rom
All the Black roms
LVSW
It didn't do it with Tmobile WM5 Rom. Tried various radio updates and it doesn't seem to make any difference. I know Jasjammin mentioned he had seen it but nothing further from him on this.
ITS DRIVING ME NUTS
Some other people must be seeing this also? Please help. When it happens no mails/sms or voice calls so its like the phone is switched off. I too am now looking at downgrading back to WM5
I'm wondering if it might be in the boot loader / rom flasher issue? But I sure I've not done anything others haven't done.
Regards,
Neil.
Bump - nobody else seeing this? Find it hard to believe?!
prophetuser said:
....The big problem is this :- randomly (could be 6 hours, could be ten minutes), the phone does not wake up from sleep. The lights are still flashing (I have not tried calling the phone - I will do that next time), but it will not wake up....
Hi prophetuser
I did notice this issue in the new HTC WM6 ROM (not the dopod one) which you have mentioned. But I flashed my ROM to Black Majik and its cool....I didnt notice this problem.
My device is imate JASJAM. I think the black majik ROM is better, but I noticed one more post in this thread mention all black ROM had the problem as I have not come across it yet.
Maybe the new Black Satin which jasjamming is cooking will not have it and probably you may have to try it, until a new HTC ROM update is leaked I suggest you to use black majik.
Click to expand...
Click to collapse
read my post
100% solution
SOD CAUSE
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
duttythroy said:
....i had never had SOD until i flashed the official dopod rom with matt kitchen. ....
What is SOD? please mentione as I am new to the terminologies
Click to expand...
Click to collapse
SOD= Sleep Of Death
Definition of SOD
1. A piece of dirt and grass, usually found stuck to the bottom of shoes after running (Or walking) On a muddy field.
2. Short for "Sodomy", meaning anal sex, which comes from the Sodomites of Sodom. This term, usually used in a derogatory manner, can be used to say **** off, as in "Sod off" or it can be used as an adjective "That sodding bastard"
3. An idiot, a fool. Someone you dislike.
4. S(Screen/Sleep) O(of) D(death) - Blank screen nothing happens..
Examples
Man, all this sod was stuck on the bottom of my shoe, and even worse, it dried out and now it's hard as a rock!
Look at that sodding bastard over there, scoping out girls he doesn't even have a chance with when they're drunk!
F'ing sod spilt my drink, and i wasn't having any of that!
Arghh FFS !! Me blinkin phones crashed again, I soo hate you SOD's.
loool ripdool . nice definitions
duttythroy said:
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Click to expand...
Click to collapse
hi mate, is it possible for you or someone else to give more specific instructions to do this? I am running Sleuths rom which i am v happy with apart from SOD every now and again in the mornings when the phone has not been used for hours whilst i have been sleeping!
thanking you in advance.
yans.

Odd Camera Fault in Vario II

I have had a scout around and no one seems to have this problem so thought I would run it by you all..
I was using Schapps WM6 ROM (6.0) until a few weeks ago when I decided to upgrade to a Kaiser. I decided to reflash the Hermes ROM to T-Mobile UK's official WM6 ROM so that I could flog it. Now the camera comes up with no picture but Green lines. The picture reacts when the camera moves so it can't be the hardware - could it be a driver issue?
A hard reset does not work. Before I attempt a different ROM, I wondered if anyone else has this issue or had come across it.
See the JPG.
Cheers
p.s stuck the thread here in the WM6 forum because I think its s/w and therefore ROM related.
believe me, its hardware related...
probably try cleaning the camera contacts (if thats possible)...
It's for sure no software issue...
you should look after a take apart direction and follow it to clean the contacts...
Regards
Thanks, after a change of camera software and ROM it still shows. T-Mobile give two year warranties over here so hopefully they will repair to free of charge. Although if I can get into the handset without them finding out it will be much easier if I can fix it myself - HTC are not that good at admitting to faults with their products.
dpswatson said:
I have had a scout around and no one seems to have this problem so thought I would run it by you all..
I was using Schapps WM6 ROM (6.0) until a few weeks ago when I decided to upgrade to a Kaiser. I decided to reflash the Hermes ROM to T-Mobile UK's official WM6 ROM so that I could flog it. Now the camera comes up with no picture but Green lines. The picture reacts when the camera moves so it can't be the hardware - could it be a driver issue?
A hard reset does not work. Before I attempt a different ROM, I wondered if anyone else has this issue or had come across it.
See the JPG.
Cheers
p.s stuck the thread here in the WM6 forum because I think its s/w and therefore ROM related.
Click to expand...
Click to collapse
i have the same problem on spv m3100 and i am desperate!i don't know how but after sometimes and a lot of try suddenly the camera make good photo but after i put a new rom the prblem come again!did you think is from contact?i should open my spv?hmmm... risky operation
i can imagine it's form the contacts... but a hardware failure in general (camera related hw) is the most likely for this kind of symptoms... if i would be you i wouldn't open it, if i had warranty left ;-)
regards
after a lot of trying i decide to open my spv m3100 and take a look in it!so ...i open it i look at it clean it(although it wasn't necessary) and i reasembly the device!lucky me the camera wortk like a charm!i was very glad and i thought all my problem disapeared but..... after i doing first soft reset .......my camera show like in the bro attachaments!**** off!i was very unhappy and tried once again to fiox it!i decide to put radio version 1.51.00.10 (of course nothing happend) and after that i decide to use the old russian trick(kick the ****ing device with a hammer)!herhehheheeh!you'll never belive me but it works!heheheh!old russian trick always work!from now on i decide not to make any soft reset until one of you discover what happend in fact!
please do not apply russian method on your device(esspecialy with a hammer) take it easy but hit the buster!heheheh!
i think i found the mistery!at least to me it works!
be attentive:
on the back of the phone on camera is a little bumb!i move it up and down several times and oups the camera works!i made soft reset and again camera dosen't work and i repeat those up and down manouver and camera begin works!i made this operations several times and everytime after that manouver camera works!i belive that is a mechanical problem on camera!i take a look at camera and also at photo and i see a little arch maybe is decalibrated and possible that is the cause!it dosen't release something don;t no for sure!see the attachement!if your device is in warranties go to service to solve the problem if not ....well try what i said!

Categories

Resources