Question on VOIP - 8525, TyTN, MDA Vario II, JasJam ROM Development

I have installed Schap's WM6 Pro 3.60a ROMs, but I can't use the voip thought wifi
I am using www.owtalk.com for the voip provider
I have input my
provider name:xxxx
user accourt: xxxx
password: xxxx
registrar address: sipb02.owtalk.com port 5060 UDP
Proxy address: (leave blank) port 5060 UDP
URIaddress: sipusername)@sipb02.owtalk.com
At the Today, it show out selected but cannot dial any number
Could you mind tell me how can i fix this?
A million thx.

Try to fill the proxy adress same as registrar, so :
registrar address: sipb02.owtalk.com port 5060 UDP
Proxy address: sipb02.owtalk.com port 5060 UDP

I have try to add the proxy before, but also can't.
Does any one success b4 by using this rom for voip ?
Thx.

Maybe some things don't work, because this is ROM based on development version of WM6. I suggest back to 3.54c, faster, more stable.

ok, I install 3.54c and try, thx

Related

Blackberry Connect - Manual Set the APN

Hi there,
I have searched the forums on how to do this already with no real success.
I have installed the extracted BB Connect software for T-Mobile onto my PDA2K, running ROM 1.40, and I am on the Canadian Rogers network.
The cab was named:
htc_pocketpc_tmo_england_2.0.0.25-18.cab
The installation runs fine and the PIN is generated correctly, however the APN settings are hardcoded to blackberry.net
I need to change this to internet.com and set a username and password of:
username: wapuser1
password: wap
Has someone been able to create an install that allows you to change this in the GUI?
Or, does someone know which DLL file this is set in so I can modify it in C++ or another DLL editor?
Or, can someone out there that knows how to do this modify the cab for me with those settings?
Cheers
Aaron
Actually, my mistake... I need to have these settings:
Rogers AT&T (Canada)
GPRS APN : blackberry.net
WAP gateway IP: 208.200.67.150
WAP gateway port: 9201
Cheers
Aaron
I've been able to modify the IP with a HEX editor and it connects and gets an IP.
However, it still doesn't sync. I wonder if the ports are incorect. It says:
Remote Port: 19781
Local Port: 19780
Not sure if this needs to be changed....
A

Where is username password stored WM5??

Hello
I am preparing a serval htc 's with wm5 (qtek 9000). In our extend rom i have put our own applications and settings as much as i can. what i can't get done is to store:
Username and password for our APN (gprs umts pap authentication)
(after a part of registry clone the username and password are blank ??!)
username/password option to set for active sync for push pull technology.
I think it is somewhere in a database and/or in the registry.
Any help is welcome
Thanks
Jeroen
jeroenvtec said:
Hello
I am preparing a serval htc 's with wm5 (qtek 9000). In our extend rom i have put our own applications and settings as much as i can. what i can't get done is to store:
Username and password for our APN (gprs umts pap authentication)
(after a part of registry clone the username and password are blank ??!)
username/password option to set for active sync for push pull technology.
I think it is somewhere in a database and/or in the registry.
Any help is welcome
Thanks
Jeroen
Click to expand...
Click to collapse
done
works flawless through xml programming

8525 WM6 MMS solution

If after upgrading your 8525 to a cooked version of Windows Mobile 6, you discover that you cannot send or receive any MMS' (even after hunting down the WAP & MMS setting for cingular/AT&T) Run this cab on your device. (install to Main memory)
Download:
http://forum.xda-developers.com/attachment.php?attachmentid=35956&d=1174785983
Orginal forum thread:
http://http://forum.xda-developers.com/showpost.php?p=1163312&postcount=1
NOTE: I notice that it changed the appearance of several setting's screens in regards to the Connections tab.
It worked for me. It might also work for other providers, Let me know...
Please include in your response:
-Manufacture and type
-Model No.
-Rom Version
Example:
Cingular 8525
HERM100
(20070326_RUU_Hermes_WWE_3.23.0.2_1.38.00.10)
Running a Cingular 8525/Herm100 on Black 2.0. On all WM6 ROM's I have been able to send and receive, it just gives me an 'error synchronizing' message whenever I try and do it manually. Everything eventually goes where it is supposed to though.
Was hoping this would fix that, but still works the same.
using wm6 black 2 on telstra australia with latest radio. worked on all accounts including lvsms.
so no "problem" here (once i got the settings and manually entered them, tweaked around and learned the hard way with hours of work).
My 8525 also works perfect sending and recieving MMS I have entered the Server settings so many times now i know them by heart sometimes i do have to play with the settings either changinf the port number from 80 to 8080 and changing it to use the internet or My ISP to send them.
I too suffered from the Sync Error message and could not get MMS to work. But I ran the CAB posted at the top of this thread and it now works. I tried everything and every setting that was mentioned, I tried every cab file and every fix I could find. (I know the settings by heart) Now for the big new, once I ran the cab the only thing that I could see that it changed was the last setting of kb's. Before the cab and what everyone said to set it at was 300 but after the cab it is now set at 600. I don't know if this is the change that fixed everything or not but I can tell you that now my MMS does work on my Cingular 8525 running the latest LVSW/26.
can someone please help with 3 Australia MMS settings.
Ive entered them all in, changed the user agent for arcsoft MMS software in the registry and i still cant get them to send or recieve with success & i get the error sync message too.
can anyone help me find the missing link???
Drooch
Dopod 838pro
HERM100
Black 2.0
FWIW, I discovered I was having a problem with sending MMS today. I upgraded to Black 2.0 a couple of weeks ago, but I don't typically use MMS, and so I never discovered this problem before. I found this thread thru Google, and dowloaded the cabfile noted at the top. But I didn't install it. Instead, I took some hints from the name.
On my phone, I had already set up two non-proxied ISP accounts on my 8525 ... wap.cingular and isp.cingular. Of course, I also have the MediaNet Account that uses the proxy. I typically have my phone parked on the ISP account, and that's where I was having this problem.
Looking at the name of this cabfile, I decided to try the MediaNet (proxy) Account next. That wouldn't work either, failing continuously. So then I set my phone to use the wap.cingular (no proxy) account, and bingo, it worked.
As Owycx has noted in the second post (above), I DID get the "Error Synchronizing" message, but this message quickly disappeared and the MMS Message was sent out pronto.
So to those (Cingular) users who might be having this problem, you might be able to fix it without installing the cab ... just make sure you're using the following "Connections" settings:
Code:
Name: [whatever you like]
Modem: [B][U]Cellular Line (GPRS, 3G)[/U][/B]
«Next»
Access point name: [B][U]wap.cingular[/U][ /B]
«Next»
User name: [B][U][email protected] .COM[/U][/B]
Password: [B][U]CINGULAR1[/U][/B]
Domain: [blank]
«Advanced...»
«TCP/IP Tab»
(o) Use server-assigned IP address
( ) Use specific IP address
[ . . . ]
[ ] Use slip
[ ] Use software compression
[X] Use IP header compression
«Servers Tab»
(o) Use server-assigned addresses
( ) Use specific server address
DNS: [ . . . ]
Alt DNS: [ . . . ]
WINS: [ . . . ]
Alt WINS: [ . . . ]
Hope this helps,
-pvs
pvs said:
FWIW, I discovered I was having a problem with sending MMS today. I upgraded to Black 2.0 a couple of weeks ago, but I don't typically use MMS, and so I never discovered this problem before. I found this thread thru Google, and dowloaded the cabfile noted at the top. But I didn't install it. Instead, I took some hints from the name.
On my phone, I had already set up two non-proxied ISP accounts on my 8525 ... wap.cingular and isp.cingular. Of course, I also have the MediaNet Account that uses the proxy. I typically have my phone parked on the ISP account, and that's where I was having this problem.
Looking at the name of this cabfile, I decided to try the MediaNet (proxy) Account next. That wouldn't work either, failing continuously. So then I set my phone to use the wap.cingular (no proxy) account, and bingo, it worked.
As Owycx has noted in the second post (above), I DID get the "Error Synchronizing" message, but this message quickly disappeared and the MMS Message was sent out pronto.
So to those (Cingular) users who might be having this problem, you might be able to fix it without installing the cab ... just make sure you're using the following "Connections" settings:
Code:
Name: [whatever you like]
Modem: [B][U]Cellular Line (GPRS, 3G)[/U][/B]
«Next»
Access point name: [B][U]wap.cingular[/U][ /B]
«Next»
User name: [B][U][email protected] .COM[/U][/B]
Password: [B][U]CINGULAR1[/U][/B]
Domain: [blank]
«Advanced...»
«TCP/IP Tab»
(o) Use server-assigned IP address
( ) Use specific IP address
[ . . . ]
[ ] Use slip
[ ] Use software compression
[X] Use IP header compression
«Servers Tab»
(o) Use server-assigned addresses
( ) Use specific server address
DNS: [ . . . ]
Alt DNS: [ . . . ]
WINS: [ . . . ]
Alt WINS: [ . . . ]
Hope this helps,
-pvs
Click to expand...
Click to collapse
Also what i have found that helps is go to settings> connetions> connections> advanced> select networks> make sure that the bottom matches the top setting that way it wont be switching networks for different things.
My MMS server is as follows.
Server name:
Cingular MMS
Gateway:
wireless.cingular.com
Port number:
8080
Server Address:
mmsc.cingular.com
Connect via:
My Isp(or what ever you set the name as in your connections)
Sending Size limite:
300K
Wap version:
WAP 2.0
these settings ALWAYS work for me. I never use the proxy settings that come with the cab for cingular for media net. even though i guess i loose some size of the message i can send from 600K to 300K its no biggy to me.

VOIP with T-Mobile

Hi,
I tried a lot of settings on Schaps 4.01 rom in then voip-settings.
the following should be right but don t work.
provider name: T-Online
user account: [email protected]
password: ******
registar adress: tel.t-online.de
proxyadress: tel.t-online.de
Port: 5060 UDP
does anybody get t-mobile voip run?
this should be possible..
greets
voxid

T-Mobile MMS

FIX HAS BEEN ADDED PLEASE READ THROUGH
Anyone that cant send or receive MMS please follow steps below:
After couple of days of searching and testing, i Finally have the Solution.
You must follow the steps exactly if you want to be able to receive and send MMS on T-mobile if you have the following Rom: 6.5|ROM|WWE| ★ EnergyROM "Leo" (23016) Sep 23 ★ Latest Manila 2.5 / Twitter Tab! ★
Step 1: Go to http://forum.xda-developers.com/show...45&postcount=1 and download the Cab that says: Zenyee Disable HTC Messaging 1.2.CAB and copy it to your Phone.
Step 2: Install the Cab on your Device, now htc messaging disabled click OK now will ask to restart click YES.
Step 3: Go to Start > Settings > Connections > Connections > You will see Tasks >> Advanced click on Select Networks :
under Network Management you will see (Programs that automatically connect to internet should connect using
select: New. Name it T-Mobile MMS, under Modem tab select New & call it T-Mobile MMS with the modem as Cellular Line (GPRS, 3G)
,
set the access point as epc.tmobile.com with no User name or Password. make sure under Proxy Settings you
check the small box that says: This network connects to the internet Finish.
But if u already have T-mobile MMS in the drop menu then make sure the settings are what was stated
Step 4: Go to Messages > All Messages > Menu > MMS Options...> Servers > New >
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port #: 8080
Server Address: http://mms.msg.eng.t-mobile.com/mms/wapenc
Connect via: T-Mobile MMS
Send limit: 300k
WAP Version: WAP 2.0
click Done
I tried as best as i can to give you the steps in details i hope it is not confusing if u need any help let me know
credit goes to: zenkinz for the Cab and xnifex for the Settings and felixm477 for the link to the Cab
Good Luck all
wahida76 said:
I searched all over for a fix to MMS on U.S T- Mobile but with no luck i can not send or receive picture messages does anyone have a fix or a cab? Thank you
Click to expand...
Click to collapse
Are you using Manila 2.5? Which ROM are you using?
ai6908 said:
Are you using Manila 2.5? Which ROM are you using?
Click to expand...
Click to collapse
I am using this 6.5|ROM|WWE| ★ EnergyROM "Leo" (23016) Sep 23 ★ Latest Manila 2.5
http://forum.xda-developers.com/showthread.php?t=562773
I am using the same ROM and can't get MMS to work either. I tried what is shown in the Wiki for that ROM but no luck.
Thanks for any help.
Have you tried checking the settings?
Try the site below.
If that Doesn't work, I can try and cab the file from the TMOUS Rom
http://tmobileuspublic.wdsglobal.com/index.html
cdguider said:
Try the site below.
If that Doesn't work, I can try and cab the file from the TMOUS Rom
http://tmobileuspublic.wdsglobal.com/index.html
Click to expand...
Click to collapse
Thank you I am going to try now
wahida76 said:
Thank you I am going to try now
Click to expand...
Click to collapse
the list does not have Touch Pro II
cdguider said:
Try the site below.
If that Doesn't work, I can try and cab the file from the TMOUS Rom
http://tmobileuspublic.wdsglobal.com/index.html
Click to expand...
Click to collapse
i tried and used the tytn II from the drop down menu but no luck but still thank u for trying
cdguider said:
Try the site below.
If that Doesn't work, I can try and cab the file from the TMOUS Rom
http://tmobileuspublic.wdsglobal.com/index.html
Click to expand...
Click to collapse
Would it be possible for you to cab the AOL IM client from the TMOUS Rom?
What settings have your entered?
1. Create a connection (T-Mobile MMS as an example) with wap.voicestream.com as the APN (cellular line, no proxy, not connected to the internet).
2. Go to MMS option in Messaging and create a new server:
Gateway: 216.155.165.50
Port number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: your created connection (T-Mobile MMS as an example)
Send limit: 300K
WAP version: 2.0
If this doesn't work, try http://mms.msg.eng.t-mobile.com/mms/wapenc as the server address.
bachviet said:
What settings have your entered?
1. Create a connection (T-Mobile MMS as an example) with wap.voicestream.com as the APN (cellular line, no proxy, not connected to the internet).
2. Go to MMS option in Messaging and create a new server:
Gateway: 216.155.165.50
Port number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: your created connection (T-Mobile MMS as an example)
Send limit: 300K
WAP version: 2.0
If this doesn't work, try http://mms.msg.eng.t-mobile.com/mms/wapenc as the server address.
Click to expand...
Click to collapse
tried all that but no luck
wahida76 said:
tried all that but no luck
Click to expand...
Click to collapse
How about epc.tmobile.com as APN without any proxy?
wahida76 said:
tried all that but no luck
Click to expand...
Click to collapse
bachviet said:
How about epc.tmobile.com as APN without any proxy?
Click to expand...
Click to collapse
testing now
wahida76 said:
testing now
Click to expand...
Click to collapse
still no luck
yeah this was asked a few days ago. here are my settings that are on my TP2 with the stock rom
http://forum.xda-developers.com/showpost.php?p=4582521&postcount=8
wahida76 said:
tried all that but no luck
Click to expand...
Click to collapse
bachviet said:
How about epc.tmobile.com as APN without any proxy?
Click to expand...
Click to collapse
wahida76 said:
testing now
Click to expand...
Click to collapse
wahida76 said:
still no luck
Click to expand...
Click to collapse
xnifex said:
yeah this was asked a few days ago. here are my settings that are on my TP2 with the stock rom
http://forum.xda-developers.com/showpost.php?p=4582521&postcount=8
Click to expand...
Click to collapse
still no luck
To all who tried to help Thank u so much, only 2 tried to help out of 249 that viewed this iam not sure why? even NRG who did the ROM I sent him a PM still no help from him too. but any way thanx
I sent this to ace10134 and lets hope he has a solution to the problem
I have an Issue with the T-Mobile MMS and I hope u may be of help to solving this issue please
this is the history of the issue so far:
wahida76 said:
I searched all over for a fix to MMS on U.S T- Mobile but with no luck i can not send or receive picture messages does anyone have a fix or a cab? Thank you
Click to expand...
Click to collapse
wahida76 said:
I am using this 6.5|ROM|WWE| ★ EnergyROM "Leo" (23016) Sep 23 ★ Latest Manila 2.5
http://forum.xda-developers.com/showthread.php?t=562773
Click to expand...
Click to collapse
gabmurillo said:
I am using the same ROM and can't get MMS to work either. I tried what is shown in the Wiki for that ROM but no luck.
Thanks for any help.
Click to expand...
Click to collapse
cdguider said:
Try the site below.
If that Doesn't work, I can try and cab the file from the TMOUS Rom
http://tmobileuspublic.wdsglobal.com/index.html
Click to expand...
Click to collapse
wahida76 said:
the list does not have Touch Pro II
Click to expand...
Click to collapse
wahida76 said:
i tried and used the tytn II from the drop down menu but no luck but still thank u for trying
Click to expand...
Click to collapse
bachviet said:
What settings have your entered?
1. Create a connection (T-Mobile MMS as an example) with wap.voicestream.com as the APN (cellular line, no proxy, not connected to the internet).
2. Go to MMS option in Messaging and create a new server:
Gateway: 216.155.165.50
Port number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: your created connection (T-Mobile MMS as an example)
Send limit: 300K
WAP version: 2.0
If this doesn't work, try http://mms.msg.eng.t-mobile.com/mms/wapenc as the server address.
Click to expand...
Click to collapse
wahida76 said:
tried all that but no luck
Click to expand...
Click to collapse
bachviet said:
How about epc.tmobile.com as APN without any
I sent this to ace10134 so lets hope he can find some kind of solution to the problem
proxy?
Click to expand...
Click to collapse
wahida76 said:
still no luck
Click to expand...
Click to collapse
xnifex said:
yeah this was asked a few days ago. here are my settings that are on my TP2 with the stock rom
http://forum.xda-developers.com/showpost.php?p=4582521&postcount=8
Click to expand...
Click to collapse
wahida76 said:
still no luck
To all who tried to help Thank u so much, only 2 tried to help out of 249 that viewed this iam not sure why? even NRG who did the ROM I sent him a PM still no help from him too. but any way thanx
Click to expand...
Click to collapse
it is much appreciated if u can help thank you
taken straight from my stock TP2
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port #: 8080
Server Address: http://mms.msg.eng.t-mobile.com/mms/wapenc
Connect via: T-Mobile MMS
Send limit: 1000k
WAP Version: WAP 2.0
As for the Connection settings for T-Mobile MMS go to Settings>Connections>Connections>Advanced>Select Networks & select New. Name it T-Mobile MMS, under Modem tab select New & call it T-Mobile MMS with the modem as Cellular Line (GPRS, 3G), set the access point as epc.tmobile.com with no User name or Password. Finish & make sure that's what you have selected under "Connect via" in the MMS Server settings.
xnifex said:
taken straight from my stock TP2
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port #: 8080
Server Address: http://mms.msg.eng.t-mobile.com/mms/wapenc
Connect via: T-Mobile MMS
Send limit: 1000k
WAP Version: WAP 2.0
As for the Connection settings for T-Mobile MMS go to Settings>Connections>Connections>Advanced>Select Networks & select New. Name it T-Mobile MMS, under Modem tab select New & call it T-Mobile MMS with the modem as Cellular Line (GPRS, 3G), set the access point as epc.tmobile.com with no User name or Password. Finish & make sure that's what you have selected under "Connect via" in the MMS Server settings.
Click to expand...
Click to collapse
Same thing no luck i even did a hard rest then did the settings all over again with no luck but thanks any way
This is the last respond i got
Well the MMS doesnt work because you're on the Manila 2.5 ROM. Only way to make MMS work is by disabling the new HTC Messaging thing. Apparently the old method doesn't work anymore. If you want MMS, just use a more stable, and standard Manila 2.1 ROM. HTC will fix up the MMS in time, so thats a HUGE reason why to NOT try to make a workaround for the MMS right now. It'll be a wasted effort in a few weeks.
Just flash a Manila 2.1 ROM, and your world will be back in orbit
So we all have to wait for everyone that has this issue for now

Categories

Resources