I am using an Artemis Orbit,TOMCODON's Rom B&B V.4.0 TOUCHFLO realise>Now i want to conect ActiveSyn with Pc without changing power. Can you help me?sorry i bad at ENGLICSH
Related
All,
i'm trying to reflash bootloader to (hoping to) fix my lovely button problem!
After setting herm in boot mode (POWER+OK+RESET), connected the HERM to my PC, i run the MTTY utils and... this damn prg do not see any USB port.
If i use MTTY 1.16, the PC see only RS232 ports
If i use MTTY 1.42, the PC see only RS232 ports
If i use MTTY 0.01, the PC see USB port but answ me that the port cannot be opened.
Some one know this issue???
Tanks
RESOLVED Stopping activesync processes!
Again tanks
Perhaps you should explain your 'button problem' first as it might not require you to use mtty?
I have a Qtek 9090 when I connect it with my pc .
My pc show me that an uknown USB
so blease help me ....*thank you all
Hey are you sure you have ActiveSync installed and it's working??
yes I have install activesync 4.5 but the problem stay ......when I connect my ppc to pc it always show me the ppc as uknown perephiric .
and thanx for ur raplay...
Hi to everybody!!!
I have used qtek 9000 with usb cabel,but without cd-software, i installd Microsoft acitve sync on my pc, but i cant connect gtek via USB mini cabel with pc - say: "ActiveSync cannot connect to the Windows mobile powered device"
Pls, where can i download cd software for qtek9000 or some driver???
Thnks to all,
hope this will help!!
thats a "working" active sync installation from my pc!
unrar and replace the files on your AS installation folder!
hope this will help you!!
here i comes!
This driver isnt for modem usb
pinkfluid said:
Hi to everybody!!!
I have used qtek 9000 with usb cabel,but without cd-software, i installd Microsoft acitve sync on my pc, but i cant connect gtek via USB mini cabel with pc - say: "ActiveSync cannot connect to the Windows mobile powered device"
Pls, where can i download cd software for qtek9000 or some driver???
Thnks to all,
Click to expand...
Click to collapse
Do you have any firewall installed? Have you run the Activesync troubleshooter? Atlast go to your device--> settings-->Connections-->USB to PC--> uncheck the Unable advanced network functionality
hi
i have a diamond that when i connect to the USB cable ,it ask me normaly to chose betwen Activesync and mass storage but whatever i chose nothing happens on my pc and diamond itself.
my pc and my cable are ok because i can sync my friends diomond noramly.
does my diamond have a hardware problem?
adempozhari said:
hi
i have a diamond that when i connect to the USB cable ,it ask me normaly to chose betwen Activesync and mass storage but whatever i chose nothing happens on my pc and diamond itself.
my pc and my cable are ok because i can sync my friends diomond noramly.
does my diamond have a hardware problem?
Click to expand...
Click to collapse
Depending on whether you are using Vista or Xp.
Try this: Go to Start>Settings>Connections>USB to PC
> if there is a check mark by "Enable faster data sych.......Remove and see if this fixes your problem.
Secondly, if you flashed your ROM then make sure you remove the previous Device Partnership in your Activesync settings and make a NEW PARTNERSHIP.
Hope this helps!
i have the same problem i connect my phonr to my pc but it wont establisch a activesync connection
I have also the same problem.
When i connect mij Diamond richt below on mij PC sreen see I the message PC can't reconize mij Diamond (tested on more PC's with differnt cables).
If had someone the solution please mail me !
- Diamond with Hard-SPL Olinex 1.93 and the Dutch ROM v2.03.
hi,
i think my diamond has a hardware problem...because it ask me if i want to use activesync or storage when i plug the charger....
Hello!
First, sorry my bad english
I have bought my samsung i780 just for a week. I would like to connect it to my laptop to update the contacts and save the pictures. I installed the ms activesync 4.5 and plugged in the data cable (type: APCBS10BBE and also tried APCBS10UGE). The windows sent me an error message about could not recognise the phone. I have not installed any specific usb driver. I tried plug in and out the cable more times (about 10-15) and once there was a success, the synchronisation was fine. Everytime when i try to connect, i have to repeat the plug in/out procedure about 10-15 times... I am afraid, this is the i780 usb connectors fault Is there any other possibility to fix the problem whithout change the connector?
Could you be so kind to give me some advices?
Thanks
TSanya
Try getting a Bluetooth USB Pen...
Thanks, but i've already tried the bluetooth for connetcting to the activesync. The problem is: I can't set up the bluetooth serial port on the i780 to the same as the pc bt serial...
i have this same problem :/ i made hard reset and after it i cant connect :/
having same problem with my i780 I am at a loss, phone is in dutch and I can not load english rom with out usb connection, what should I do?
I had the same problem,but I have fixed it.
I got a i780 with CoinJun's Rom which version was forgot.I often can not sync to my pc.I upgraded the new ROM which version is PDXIB1 downloaded from samsung.Now,it is ok.
i have a big problem. i have a samsung i780 with orange rom (pbvic2), he wont connect to activesync, when i put the cable usb in, he charge, red led is on, the pc make sound connection, on the phone appears "connecting to host" but nothing. And another problem is that he see the sd card, but the computer wont, i try another card, the card reader is seeing , after i put him in the phone he become invisible on the pc, he corrupte them, pls tell what to do, or maybe i need to change the rom? but how ? becausae i have no pc connection...
sorry for my english