CONNECTION ERROR, I have rebooted both the PC and the JasJar, and always the same, somebody has any tips ?, please help, thanks
Now I am getting RADIO ROM error
thanks
Combine all Files and Roms in one Directory
if you get te connection error
Do the following:
Make sure your PPC is switched off when pluggin in
Switch on the PPC - You should get a connection
Dont try upgrade until Active Sync settings have been saved ....
I did it, and the same I get CONNECTION ERROR
Skillie said:
Combine all Files and Roms in one Directory
if you get te connection error
Do the following:
Make sure your PPC is switched off when pluggin in
Switch on the PPC - You should get a connection
Dont try upgrade until Active Sync settings have been saved ....
Click to expand...
Click to collapse
The Activesync works fine, is green and moving, when It will stop I will Run the UPgrade, but I will always get "CONNECTION ERROR"
Are You using ActiveSync 4.1
On my USb 1.1 machine I always battle to do upgrades
on my USB 2.0 Machine everything works 100%
Put the Exec in bootloader first:
Power button + Backlight + reset:
Have fun with the upgrade .
Hi all.
Finally update my M3100 to WM6 (thanks to LVSM) and i can't connect with my Windows Vista desktop using latest driver from Microsoft.
I can connect with Windows XP box with Active Sync 4.5 without any problem.
Anyone get this working or am i crazy?
Thanks all.
Windows VISTA has a new activesync.
If you connect your device, you should see that Vista auto detects your phone.
But you can't install programs etc.
Then you have to run Windows Update to dowload an additional package, so you
can install programs etc.
So if your Vista ain't that legal, then don't try.
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
1V4NW00 said:
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
Click to expand...
Click to collapse
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
vayip said:
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
Click to expand...
Click to collapse
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
1V4NW00 said:
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
Click to expand...
Click to collapse
Well, i expose my complete experience with Vista (of course legal copy )
I have one Qtek 9100 and one TyTN (SPV M3100 Spanish Orange).
days ago both of them with WM5 (original branded)
Yesterday move qtek 9100 to WM6, but can't do with Vista so i do in a VMWare Windows XP box running into Vista with VMWare Workstation (this works very fine). once the 9100 was WM6, Vista says taht the device is new and can't find the driver, but one day before works fine.
So today upgrade my TyTN with the same, put the RUU in the XP box, and works fine, but the same results in Vista and Mobile Sync. Works with SM5 but not with WM6. But in XP box, works with boths.
I think MS checks the OS version in Vista Sync, so you can't sync if the OS version isn't in the list of legal OS mobile.
I am running Windows Vista Ultimate and have WMXL 0.20 on my phone.
I can connect my phone to vista and i can browse my phone. I see the storage card and the internal memory.
You can't install application trough this.
If you want to install application when using Windows Vista, connect your phone with the USB cable, wait for Windows to detect your phone and install the drivers, then run Windows Update.
Then it will download an package so you can install applications.
Windows Vista uses the new Mobile Sync Center hence the RUU cannot connect with your PDA... if you replace the Mobile Sync Center drivers with the activesync ones you can get it to work...
there is a search button on the top right of this forum... as this topic has been discussed and answered many times before i suggest you use the search feature as it works wonders....
I installed Windoes Mobile Device Center on Vista, and I did not have a problem getting it to recognize my hermes w/ XDA-live 0.20. I did nothing special, just plugged it in, it was recognized, I configured it, and it syncs no problem.
Ross
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
jcespi2005 said:
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
Click to expand...
Click to collapse
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
walshieau said:
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
Click to expand...
Click to collapse
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
jcespi2005 said:
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
Click to expand...
Click to collapse
did you download the spanish version of Mobile Device Center or the english version???
walshieau said:
did you download the spanish version of Mobile Device Center or the english version???
Click to expand...
Click to collapse
Spanish. I must wait since installs Vista two weeks for the spanish version of the device center
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
fourcc said:
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
Click to expand...
Click to collapse
I'm in your same situation.
Im my case, Vista dosn't find the correct driver for my M3100 with LVSW WM6 (perhaps i make a mistake installing, i'll reinstall Vista soon ) In XP box no problem to do that, and gain Internet connection from M3100 to get sync with Exchange server trought Internet.
How do you set the connection in Device Center?
Everything is working fine under vista for me.
I am able to:
-use ICS through USB, PAN
-manage installed programmes
-browse the device
...
I am using an english vista + an english WM6 tytn ROM
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
m15chief said:
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
Click to expand...
Click to collapse
You just need to enable viewing of System folders in Folder options
I'm using Vista since the first day and I have updated my TyNT with LVSW ROM and everything works.
Bluetooth activesync / USB activesync / Pairing with Outlook 2007 / Seeing all the files on Main Memory and Storage Card....
All put in one word, everything is perfect.
Only one thing hasn't worked : I haven't been able to update using Vista.
Trying to watch TV on orange TV feeds... got an error "failed to retrieve network"...
Any idea ?
I have the same problem, doesn't work with Swedish televisions mobile tv. Tried connected via usb, wifi and gprs - the same error.
I have however gotten it to work previously (WM5, AKU 3.3) using this thread:
http://forum.xda-developers.com/showthread.php?t=288857
But now in lvsw (03-25) rom I can't install the cab file, get some kind of unsufficient system permissions ...
Hey i'm trying to connect to activesync and it keeps giving me this error, "Cannon open the connection '57600 default'. This connection is no longer valid or does not exist. Select a different connection and try again. I just installed it like 10 min ago....so i know activesync does work....please help...thanks!!!
nevermind...i'm not sure what i did but i got it working
start/settings/connections/USB to PC, then enable it
and this is because of WM5torage, it needs to disable this before running wm5torage
haha!! thanks man!!! that is what i did
hi all,
i have manila_2d_full rom from mr TAI_sw
i have difficulties when i want connect application ( metatrader mobile) to internet. i doesnt connect at all
but if i run browser first, then open metatrade, it can connect as long as any data flows from the browser.
please help how to connect application to internet independently
i have try with several roms, and have same result
thx
what is the error ? Is it the unknown error 0x80072f78?
If so you can use regedit and make a new dword
for:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Then reset your device and PC please tell me if that solves it
no, there is no error message,
i just cannot connect the app to internet except i have to trigger the connection by running opera first