CONNECTION ERROR, I have rebooted both the PC and the JasJar, and always the same, somebody has any tips ?, please help, thanks
Now I am getting RADIO ROM error
thanks
Combine all Files and Roms in one Directory
if you get te connection error
Do the following:
Make sure your PPC is switched off when pluggin in
Switch on the PPC - You should get a connection
Dont try upgrade until Active Sync settings have been saved ....
I did it, and the same I get CONNECTION ERROR
Skillie said:
Combine all Files and Roms in one Directory
if you get te connection error
Do the following:
Make sure your PPC is switched off when pluggin in
Switch on the PPC - You should get a connection
Dont try upgrade until Active Sync settings have been saved ....
Click to expand...
Click to collapse
The Activesync works fine, is green and moving, when It will stop I will Run the UPgrade, but I will always get "CONNECTION ERROR"
Are You using ActiveSync 4.1
On my USb 1.1 machine I always battle to do upgrades
on my USB 2.0 Machine everything works 100%
Put the Exec in bootloader first:
Power button + Backlight + reset:
Have fun with the upgrade .
Hey i'm trying to connect to activesync and it keeps giving me this error, "Cannon open the connection '57600 default'. This connection is no longer valid or does not exist. Select a different connection and try again. I just installed it like 10 min ago....so i know activesync does work....please help...thanks!!!
nevermind...i'm not sure what i did but i got it working
start/settings/connections/USB to PC, then enable it
and this is because of WM5torage, it needs to disable this before running wm5torage
haha!! thanks man!!! that is what i did
Hi,
I want to access a samba share in my home network. I have a lan-storage device (dlink dns323, static ip 192.168.XX.XX) connected to a wlan-router.
When I activate my wlan on the xda orbit, I'm able to open web-pages and download gps-data for quick gps. Xda orbit is getting its ip via dhcp. As dns I defined the wlan-router.
So how can I access the share "folder1" at the dns323?
I tried this in totalcommander:
\\[email protected]\folder1
--> Error 53 while connection!
Similar in File Explorer:
\\[email protected]\folder1
--> Network ressource was not found or you do not have access rights.
From a desktop pc or laptop inside my home network I can connect to the share as user1. Without the [email protected] statement --> same result.
Can anyone help me?
Kind regards, hqqh
Hi,
now I installed z2 PocketLan. When I scan my network, my NAS (DNS323), wlan router and my linux server were found. But when I try to connect using group name user name and password the error message: "Network path not found." is printed. This happen when I try to connect to the NAS and the linux server (smb server is running).
I'm happy about any help.
Kind regards,
hqqh
fwiw I could only get network sharing to work when i addressed it via name ie.
\\device\sharename rather than \\ipaddress\sharename.
Hi,
thank you for your hint. I tried to connect vi Internet Explorer by device name:
"\\DLINK-EE2EBC\folder1"
But when I press ENTER, the address is substituted by "file://\\DLINK-EE2EBC\folder1" and the error "Network path not found" appears.
How can I configure my device, so that it will access the LAN and not local files?
Kind regards,
hqqh
Do you have the (Start -> Settings -> Connections ->) Network Plugin installed and configured?
I've exactly the same problem, i have an Artemis P3300 and already tried everything. Also configuring the network plugin. But the plugin won't connect to my lanbox...
When i refresh the Networkneigbourhood, my lanbos can be found, but i can't tap on it (i can by my other computers in the neigbourhood). Maybe it is a problem with the firmware of my lanbox? But under WM5 everything was accesable.
hqqh said:
Hi,
thank you for your hint. I tried to connect vi Internet Explorer by device name:
"\\DLINK-EE2EBC\folder1"
But when I press ENTER, the address is substituted by "file://\\DLINK-EE2EBC\folder1" and the error "Network path not found" appears.
How can I configure my device, so that it will access the LAN and not local files?
Kind regards,
hqqh
Click to expand...
Click to collapse
when i enter a \\network\share link in IE, it gets redirected to file explorer and a blank IE window says open with file://\\device\share in the address bar. Have you tried file explorer or total commander?
also i have no settings set on the network plugin page, isnt that for sharing out your wm?
Hi,
@chiel80: You mean it is an WM6 problem? Do you know whether it is possible to update the operating system without affecting the installed software?
@mc1: Yes it tried totalcommander and file explorer. The network plugin shows the same behavior like chiel80's device. All network devices were found, but no shared folder is available. Same in the tool called pocketlan.
I dont know what I can do. Is there anyone how can access shared folders via network?
Kind regards,
hqqh
Hello,
I have the same Problem. I have tryed with PocketLAN, Resco-File-Explorer, HTC Network Plugin and Total Comander and it cames the same Problem. With Windows-Sharefolder its worked very fine. But I have Problems with my NAS-Server (Buffalo Linkstation) and my DreamBox, boths are Linux-Devices. Before I flashed my HTC Kaiser, its worked with my NAS. But after I flashed my Kaiser then the Problems has beginn. I think its a Windows Mobil 6-Problem. What can I do?
WM6 Firewall?
Hi,
I still have the problem, that I can't connect to samba shares via WLAN. I as said above, I can send pings to my linux server and I can send pings from the server to the xda orbit.
I noticed that if I connect to the samba share from e.g. another linux or windows pc, a log file is created under /var/log/samba on the server. But when I try to connect with the xda orbit, no log file will be created.
So is it possible that WM6 has a firewall, which blocks the samba ports (137-139 I think)?
I have done a port scan of the xda orbit an got the following result:
-----------------------------------------------------
Starting Nmap 4.03 ( http://www.insecure.org/nmap/ ) at 2007-12-29 10:45 CET
Interesting ports on noname (192.168.XX.XX):
(The 1645 ports scanned but not shown below are in state: filtered)
PORT STATE SERVICE
22/tcp closed ssh
25/tcp closed smtp
80/tcp closed http
110/tcp closed pop3
123/tcp closed ntp
137/tcp closed netbios-ns
138/tcp closed netbios-dgm
139/tcp closed netbios-ssn
143/tcp closed imap
443/tcp closed https
445/tcp closed microsoft-ds
465/tcp closed smtps
995/tcp closed pop3s
5190/tcp closed aol
6969/tcp closed acmsoda
8007/tcp closed ajp12
8009/tcp closed ajp13
8021/tcp closed ftp-proxy
8080/tcp closed http-proxy
8081/tcp closed blackice-icecap
8082/tcp closed blackice-alerts
8443/tcp closed https-alt
8888/tcp closed sun-answerbook
8892/tcp closed seosload
9090/tcp closed zeus-admin
9100/tcp closed jetdirect
9111/tcp closed DragonIDSConsole
9152/tcp closed ms-sql2000
9535/tcp closed man
-----------------------------------------------------
I know, if the communication was started from the xda orbit, the samba ports dont have to be open, but if the firewall has a very restrictive setup, the commuication will not be start? Just an idea.
So my question: Is there a firewall in Windows Mobile 6? If yes, how can I configure it?
Kind regards,
hqqh
Any progresses here? Struggling with the same problem here.
Hi johnpatcher,
No, there is no progress on this topic at my side ((.
Do you have this connection problem when you try to connect to a share on a linux or a windows system?
Maybe there are differences in the implementation of the samba protocol between linux and windows.
Kind regards,
hqqh
I'm trying to connect to a samba (linux) share.
It doesnt work neither with "security = user" nor with "security = share". I just get a sound, but it doesn't connect. No entries in the server log files can be found .
Hi,
I setup a connection to a winXp computer where a folder was declared as shared folder and I was able to connect to it!!!
So what is the problem? Do I have the wrong settings of the samba-server?
The ip address of my XDA Orbit is added to the list of devices which have access to the share.
Has someone established a connection between a WM6 device and a linux system?
Kind regards,
hqqh
Hi
I have the same problem on my HTC touch cruise with WM6
Using TotalCommander LAN-plugin, I get connection to all the shared folders
in the LAN, but when I want to connect to a LAN-storage, located on a USB-server (running smb-protocol) I get the storages name, but no folders or files on it.
With my elder HP Ipaq 6910 running WM5 all works perfect.
I think there must be a setting (in WM6 or HTC) that prevents WM6 from connecting to a SMB-server?
Is there anybody who can connect with WM6 to a LAN-(smb)-storage?
Thanks
Stefan
I have the same issue. My ATT-Tilt-WM6 with HTC network plugin shows all available pcs, but will only connect to actual windows machines. I've got shared Linux samba drives, and shared ibook hosted samba drives, which show up in network plugin, but it can't connect to. All pcs/ibooks/linux boxes in network can connect to each other just fine. And my other phone, a sprint 6700 with WM5, shares the ibook and linux drives just fine, I'm only having the problem with WM6.
Network access to NAS using Lobster Tunes
If you just want access to audio files? I have managed to get access to my audio files on my NAS device (Synology DS107) using Lobster Tunes.
http://lobstertunes.com
The NAS device has a media server as well as being Upnp.
There *is* a fix for browsing Linux (samba)-based shares and it involves editing a line in smb.conf on the Linux server.
BUT
I found the fix in a very obscure forum on the Internet a long time ago AND I no longer have the link!! I did fix this problem on my old Linux server but it's not currently fired up so I will have to dig it out of storage and see what I did.
This is bugging me now as I need to 'fix' my new server!
Hi!
I was struggling this issue with Kaiser. And solution came with new ROM: http://forum.xda-developers.com/showthread.php?t=395555
Unfortunately, I can't figure out why and what is difference, but if I install any other ROM (e.g. Dutty's), I can't access samba shares. If I install the one above, I can access using TC, Resco, File Explorer and maybe others.
Hope this helps someone.
PS: I have Synology DS-207+ on the network.
OK. The correct answer is here:
Change HKLM\Comm\SecurityProviders\NTLM\LmCompatibilityLe vel to 1 from 3, not to 2 (ref: http://msdn.microsoft.com/en-us/library/aa922895.aspx and http://msdn.microsoft.com/en-us/library/aa925018.aspx) as "You can also set the LmCompatibilityLevelServer value to 2 or to 3. Both of these specify that the server will only use NTLM v2. Authentication will fail if the client is not capable of NTLM v2 protocol. For more information, see Authentication Services Registry Settings".
And check to make sure HKLM\Comm\Redir\SmbSignatureMode is set to 0 (not recommended 'cos it may cause problems with windows servers), 1 or 2, but not 3 (ref: http://msdn.microsoft.com/en-us/library/aa921092.aspx).
And you can try to set HKLM\Comm\Redir\AllowedAuthMethods to 3 to see if it makes any difference. To me, 2 works fine.
No need to modify samba configurations if you are running a recent version of samba (3.0.28 right now). Anyway, you can always try to add "use spnego = no" (maybe "client use spnego = no" or "spnego = no" as stated and/or quoted in other posts/web pages, I'm not sure of it.) to see if it makes any difference in your situation/samba version.
Hi,
I'm trying to connect my laptop to the internet via my Trinity WM6 and I've seen that we need to install a .inf to make the device recognized as a Modem. I think I remember that with Wm5 no driver was needed. Is this real?
So once I've installed the HTC USB Modem driver, I figured I don't know the info I've to insert in user/pass/APN to make it work. I'm using MOVISTAR in spain. I've googled and I've seen nothing about it.
Does anyone know how to do that?
Thanks in advance for your help...
Hello
In my Trini (WM Faman 4.02) to connect the laptop to inernet only have to enter in the configuration of your Windows Mobile and uncheck the option to allow USB connections, watch your portable recognizes the Trini. Then, in your Trini go to inicio- programss - accesorios - conexion compartida, USB and Movistar and connect. That's all. Once when you finish re-activate the option in Windows Mobile to allow USB connections so you can synchronize data
Greetings
I've done exactly what you said, and when you plug the usb, the xp requires drivers.
Once drivers are installed "USBModem_Dialer.exe" asks for some connection info I don't know.
Upssss,
My OS is Windows Vista
Think that you need to configure the operator.
Home-configuration-connections-config. Operators, then verify in Home-configuration-connections-connections is configured Movistar Internet.
Now try connecting 3G by simply starting Internet Explorer
If all went well, disconnect 3G and test what I told you before using your laptop
salu2
At least, on my oold WM5. No additional softs needed.
Just plug the USB.
Then run: programs/Internet Sharing.
with the settings:
Pc connexion: USB or Bluetooth
Network connetion: <your provider GPRS/UMTS profile connection>
and click "coonect"
No idea about "WM6"
I use movitar also and many of the FAMANs vers.
First, configure your operator with the peogram found in Movistar or HTC home page (or in last FAMAN ROMs in the Configuración>Config. Operadores>Movistar. When you have access to Internet with 3G or GPRS properly configured then you only need to access to Coneción compartida using USB and thats all. In my case I used to first conect with the computer using activesync and then open the Conexión compartida program. It always wotk. Activesync looses the conection with the phone but I have access to the Internet from computer.
I use Faman 4.02 and Window XP.
Saludos,
A