Develop Bugs

Unable to reload software after hard reset. HELP!!!!

My SD card jammed for some reason and caused a hard reset of my m2000 as well as total data loss on the card itself.
Now whenever I try to reload some of my medical software back onto the SD card it says "will load software when device next connects" or "error - device not connected"
I have activesync 4.0 and can sync all my contacts etc and the sd card works fine and will take other programs (eg spb weather).
So far I have tried:
1) Deleting the partnership and restarting
2) Another hard reset
3) Reinstalling activesync (yes i did delete all the files manually as well)
4) A hard reset AND reinstalling activesync.
HELP!!

tsadek said:
Now whenever I try to reload some of my medical software back onto the SD card it says "will load software when device next connects" or "error - device not connected"
I have activesync 4.0 and can sync all my contacts etc and the sd card works fine and will take other programs (eg spb weather).
So far I have tried:
1) Deleting the partnership and restarting
2) Another hard reset
3) Reinstalling activesync (yes i did delete all the files manually as well)
4) A hard reset AND reinstalling activesync.
HELP!!
Click to expand...
Click to collapse
try uninstalling and reinstalling the medical s/w, that might help

No luck there. I still get this stupid message telling me the device isnt connected when it is SAT THERE IN THE CRADLE!!!!!
Any other ideas anyone?

Upgrade to WM6 fails ERROR [260]: CONNECTION

Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!

few people have seen this - no solution as yet.

Best workaround is to use the SD Card update method. No USB connection required.

todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.

dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes

I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.

this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.

Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx

@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID

The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works

dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.

@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.

I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)

I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers

Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.

Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!

Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers

Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.

One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.

You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse

contacts restore help :(

My mda is dead my display flatcabel is broken...
now i got to recover my contacts that i have saved on my sd card.
any idea how to restore them on pc?
Thanks

If you saved them on your SD card then just put the card into a card reader and copy them to your pc. Another thing, even though your display is dead, you may still be able to access the phone over activesync if it still boots.

I did already hard reset cause in first i meant that it was something wrong with software...
it destroyed all data on phone exept on sd card, i copied backup contacts file on pc but i dont have an idea how to open contacts on pc (is there somme kind of viewer or maybe virtual pocket pc for Xp)? i hear active sync signal when i connect Mda via usb but i dont see anything so i am not able to install anything or to do synchronization. And i still need my contacts...
Help

I've read where you can open the file that had your contacts in it up in a hex editor and it will allow you to view your contacts. Other than that, I don't know of any program that will open it up normally though. If all you're needing to do is see them, then that method should be ok. If you need to do more with them though you may want to explain what program you backed them up with and see if anyone else has any ideas.
By the way, there are programs that allow you to view what you would see on your phone on your PC. If you're still getting a good sync then using one of them should work. Here's the link to one I've tried that works well. - http://www.mymobiler.com/

Kaiser doesnt start , dont want to hard reset it :(

I have rebooted my Kaiser this morning and it took a while, and than came a message that it cant boot...
The Software i installed before the last reboot was s2p and before that i installed and deinstalled vito sms chat...
Is there a way to fix it without the need of hard reset or can i download files via the bootloader?
thanx SciLor

there may be, but if you're still waiting, it would be quicker to hard reset.
try to get used to it if you haven't already. It only takes me a few minutes now to setup after a hard reset, I keep as much as possible on a memory card, never sync with my PC, use mortscript to auto setup my programs and settings, and keep a copy of all folders on the memory card to copy accross.

I hard reseted it and used the last backup had (18March) ^^
i copy nearly everthing on my card but after the backuo WM5torage doesnt work.... even after reinstalling if i connect it it show the volume but when i click on it it says there is nothing

Help please

I dont know whats wrong with my phone I flashed the romeo 6.5 htc sense 2.5 rom onto my phone earlier and it was working fine but then it started to act up. the htc sense was laggin and skipping alot and then i tried to flash to another rom but it kept telling me that i dont have enough memory to put the nbh file onto the explorer folder. so i go check my documents on my device but nothing seem to appear. so i did a hard reset but since then the only thing that keeps showing on my screen when i turn it on is just the 1st screen of that says touch pro 2 then it blinks to another screen and it just says windows mobile romeos initializing configuration please wait but it stays on that screen and does nothing else
help please

ariel123 said:
I dont know whats wrong with my phone I flashed the romeo 6.5 htc sense 2.5 rom onto my phone earlier and it was working fine but then it started to act up. the htc sense was laggin and skipping alot and then i tried to flash to another rom but it kept telling me that i dont have enough memory to put the nbh file onto the explorer folder. so i go check my documents on my device but nothing seem to appear. so i did a hard reset but since then the only thing that keeps showing on my screen when i turn it on is just the 1st screen of that says touch pro 2 then it blinks to another screen and it just says windows mobile romeos initializing configuration please wait but it stays on that screen and does nothing else
help please
Click to expand...
Click to collapse
Sounds like you flashed one too many times. The Custom RUU's do not reformat the ROM chip. Flash a Stock ROM like one of the HTC Official Updates. This will have the stock RUU which does format the ROM chip. Then, you can go flash any ROM you like. I had this same problem once on my Kaiser where folders would disappear.

drkfngthdragnlrd said:
Sounds like you flashed one too many times. The Custom RUU's do not reformat the ROM chip. Flash a Stock ROM like one of the HTC Official Updates. This will have the stock RUU which does format the ROM chip. Then, you can go flash any ROM you like. I had this same problem once on my Kaiser where folders would disappear.
Click to expand...
Click to collapse
@drkfngthdragnlrd
Hey mate, does it means that if I flashed too many ROM in a particular period then this problem would occurred? lol~ I didn't clearly understand what you explained.
Cheers

Help with flash
I flashed my rom and installed wm6.5 now I cannot sync to my pc with vista. Please help

what150 said:
@drkfngthdragnlrd
Hey mate, does it means that if I flashed too many ROM in a particular period then this problem would occurred? lol~ I didn't clearly understand what you explained.
Cheers
Click to expand...
Click to collapse
Not that it would occur, but something similar "could" occur. This is why in the Kaiser section they always told you to flash stock/hard reset/flash custom ROM of choice/hard reset. It's not that you need to, but doing so an help prevent weird bugs from showing up like what he explained. It's just like installing Windows on a PC, they always recommend you format the drive on each install or your install could be buggy. For best results you format so the drive is clean & no left over files that can screw with the new install. Plus, low level formating will gain back bad clusters in the hard driver/ROM chip lost during use by data corruption. This format process is disabled in the XDA made Custom*RUU.exe for various reasons. So the more ROM's you flash, the more changes occur on the ROM Chip & the more likely a bug could appear.
sdb156 said:
I flashed my rom and installed wm6.5 now I cannot sync to my pc with vista. Please help
Click to expand...
Click to collapse
Check in the ROM's thread. Also, you may need to clear the PC's sync partnerships. If you have flashed a lot the PC can only handle so many Partners. Each time you flash a new ROM, it creates a new partner as it think's it's a different device.

how do you soft and hard reset the att tilt 2? Had an old tilt and I just got this a few days ago still figuring it out

sdb156 said:
how do you soft and hard reset the att tilt 2? Had an old tilt and I just got this a few days ago still figuring it out
Click to expand...
Click to collapse
Soft Reset hole is on the side of the device. It may be under the battery door. The side with the stylus, under the secondary Mic.
Hard Reset is done by holding Send/End/Power & pressing Soft Reset with stylus. Hold the Send/End/Power keys till the Hard Reset message appears onscreen.

This was the first flash I did and after a hard rest still will not sync and nothing in the thread for the rom. I cleared all my partnerships. The phone is connected and I can transfer files to and from my storage card. Do I need to update the device driver on my pc? Any way to get my outlook 2003 contacts on the phone through my storage card or any other way?

sdb156 said:
This was the first flash I did and after a hard rest still will not sync and nothing in the thread for the rom. I cleared all my partnerships. The phone is connected and I can transfer files to and from my storage card. Do I need to update the device driver on my pc? Any way to get my outlook 2003 contacts on the phone through my storage card or any other way?
Click to expand...
Click to collapse
If running XP you need ActiveSync 4.5, if running Vista/7 you need Windows Mobile Device Center 6.1. All drivers for the devices come from those programs. Have you tried manually opening Active Sync/device Center to see if it's connecting/seeing the device? Also, make sure there's no setting on the device making it act as a USB Mass Storage drive. Some ROM's give a app or setting to do this as it increases transfer rates for copying files, but it doesn't allow syncing.

I have win mobile device center and know sync. the phone will connect for usb mass storage and I can access the files on my storage card. when I connect my phone it gives me the option of outlook sync or flash drive. I select the outlook sync and the first time my pc said the device was installed successfully but no recognition from mobile device center.

sdb156 said:
I have win mobile device center and know sync. the phone will connect for usb mass storage and I can access the files on my storage card. when I connect my phone it gives me the option of outlook sync or flash drive. I select the outlook sync and the first time my pc said the device was installed successfully but no recognition from mobile device center.
Click to expand...
Click to collapse
Hum, I'm at a loss, I would post in the ROM's thread to see if anyone else has/had this issue. Maybe it's ROM related?!?!? I'm running ROMeOS without sync issues. Granted I don't sync anything, but when i open device center the device does show up. I always check this, because if the device isn't seen by WMDC, I can't get data connections while connected to USB. I have this problem a lot because I removed WMDC from startup as I don't want an app running in the BG taking up resources when I don't use it.

actually what i did was flash my rom through micro sd because my phone wouldnt load to the home screen so i wasnt able to connect to aactive sync. thank god i got my wife a tp2 also wich i was able to dl the nnhb file on the micro sd card and then just run it from my phone but yes i did flash my rom way too many times during this past weekend id say about t times in a days is there a limit of times you can flash a device per day because i dont want to fry my phone up lol silly me

ariel123 said:
actually what i did was flash my rom through micro sd because my phone wouldnt load to the home screen so i wasnt able to connect to aactive sync. thank god i got my wife a tp2 also wich i was able to dl the nnhb file on the micro sd card and then just run it from my phone but yes i did flash my rom way too many times during this past weekend id say about t times in a days is there a limit of times you can flash a device per day because i dont want to fry my phone up lol silly me
Click to expand...
Click to collapse
For future reference, you don't need to flash via SD if you are stuck. Just follow these steps.
1) Power Off
2) Hold down Volume Down button
3) Plug in USB Cable
4) Boot Loader appears onscreen & at button in White space says "USB"
5) Flash ROM via PC as normal.

yea but its not going to be connected to active sync so how do i get the nbh file onto the phone unless i can just run the ruu and it will flash

ok now everytime i try to flash my rom back to the stock one through micro sd it starts the process but then the back light turns off and then the phone stays off and i have to hard reset it can someone help me and when i connect it to the pc it has the bootloader but it says error on the bottom of the screen
do i have to flash my radio back to stock also?

I had the same problem... luckily t-mobile has a buyers remorse program... because I could not get the active sync/WMDC to work either... did you download the wifi cab on another thread? I ask because this is what did it for me? Or maybe a combo of cabs but definately linked to the wifi cab... Gettin a new phone today... if anyone figure this out, make it a sticky!