I dont know whats wrong with my phone I flashed the romeo 6.5 htc sense 2.5 rom onto my phone earlier and it was working fine but then it started to act up. the htc sense was laggin and skipping alot and then i tried to flash to another rom but it kept telling me that i dont have enough memory to put the nbh file onto the explorer folder. so i go check my documents on my device but nothing seem to appear. so i did a hard reset but since then the only thing that keeps showing on my screen when i turn it on is just the 1st screen of that says touch pro 2 then it blinks to another screen and it just says windows mobile romeos initializing configuration please wait but it stays on that screen and does nothing else
help please
ariel123 said:
I dont know whats wrong with my phone I flashed the romeo 6.5 htc sense 2.5 rom onto my phone earlier and it was working fine but then it started to act up. the htc sense was laggin and skipping alot and then i tried to flash to another rom but it kept telling me that i dont have enough memory to put the nbh file onto the explorer folder. so i go check my documents on my device but nothing seem to appear. so i did a hard reset but since then the only thing that keeps showing on my screen when i turn it on is just the 1st screen of that says touch pro 2 then it blinks to another screen and it just says windows mobile romeos initializing configuration please wait but it stays on that screen and does nothing else
help please
Click to expand...
Click to collapse
Sounds like you flashed one too many times. The Custom RUU's do not reformat the ROM chip. Flash a Stock ROM like one of the HTC Official Updates. This will have the stock RUU which does format the ROM chip. Then, you can go flash any ROM you like. I had this same problem once on my Kaiser where folders would disappear.
drkfngthdragnlrd said:
Sounds like you flashed one too many times. The Custom RUU's do not reformat the ROM chip. Flash a Stock ROM like one of the HTC Official Updates. This will have the stock RUU which does format the ROM chip. Then, you can go flash any ROM you like. I had this same problem once on my Kaiser where folders would disappear.
Click to expand...
Click to collapse
@drkfngthdragnlrd
Hey mate, does it means that if I flashed too many ROM in a particular period then this problem would occurred? lol~ I didn't clearly understand what you explained.
Cheers
Help with flash
I flashed my rom and installed wm6.5 now I cannot sync to my pc with vista. Please help
what150 said:
@drkfngthdragnlrd
Hey mate, does it means that if I flashed too many ROM in a particular period then this problem would occurred? lol~ I didn't clearly understand what you explained.
Cheers
Click to expand...
Click to collapse
Not that it would occur, but something similar "could" occur. This is why in the Kaiser section they always told you to flash stock/hard reset/flash custom ROM of choice/hard reset. It's not that you need to, but doing so an help prevent weird bugs from showing up like what he explained. It's just like installing Windows on a PC, they always recommend you format the drive on each install or your install could be buggy. For best results you format so the drive is clean & no left over files that can screw with the new install. Plus, low level formating will gain back bad clusters in the hard driver/ROM chip lost during use by data corruption. This format process is disabled in the XDA made Custom*RUU.exe for various reasons. So the more ROM's you flash, the more changes occur on the ROM Chip & the more likely a bug could appear.
sdb156 said:
I flashed my rom and installed wm6.5 now I cannot sync to my pc with vista. Please help
Click to expand...
Click to collapse
Check in the ROM's thread. Also, you may need to clear the PC's sync partnerships. If you have flashed a lot the PC can only handle so many Partners. Each time you flash a new ROM, it creates a new partner as it think's it's a different device.
how do you soft and hard reset the att tilt 2? Had an old tilt and I just got this a few days ago still figuring it out
sdb156 said:
how do you soft and hard reset the att tilt 2? Had an old tilt and I just got this a few days ago still figuring it out
Click to expand...
Click to collapse
Soft Reset hole is on the side of the device. It may be under the battery door. The side with the stylus, under the secondary Mic.
Hard Reset is done by holding Send/End/Power & pressing Soft Reset with stylus. Hold the Send/End/Power keys till the Hard Reset message appears onscreen.
This was the first flash I did and after a hard rest still will not sync and nothing in the thread for the rom. I cleared all my partnerships. The phone is connected and I can transfer files to and from my storage card. Do I need to update the device driver on my pc? Any way to get my outlook 2003 contacts on the phone through my storage card or any other way?
sdb156 said:
This was the first flash I did and after a hard rest still will not sync and nothing in the thread for the rom. I cleared all my partnerships. The phone is connected and I can transfer files to and from my storage card. Do I need to update the device driver on my pc? Any way to get my outlook 2003 contacts on the phone through my storage card or any other way?
Click to expand...
Click to collapse
If running XP you need ActiveSync 4.5, if running Vista/7 you need Windows Mobile Device Center 6.1. All drivers for the devices come from those programs. Have you tried manually opening Active Sync/device Center to see if it's connecting/seeing the device? Also, make sure there's no setting on the device making it act as a USB Mass Storage drive. Some ROM's give a app or setting to do this as it increases transfer rates for copying files, but it doesn't allow syncing.
I have win mobile device center and know sync. the phone will connect for usb mass storage and I can access the files on my storage card. when I connect my phone it gives me the option of outlook sync or flash drive. I select the outlook sync and the first time my pc said the device was installed successfully but no recognition from mobile device center.
sdb156 said:
I have win mobile device center and know sync. the phone will connect for usb mass storage and I can access the files on my storage card. when I connect my phone it gives me the option of outlook sync or flash drive. I select the outlook sync and the first time my pc said the device was installed successfully but no recognition from mobile device center.
Click to expand...
Click to collapse
Hum, I'm at a loss, I would post in the ROM's thread to see if anyone else has/had this issue. Maybe it's ROM related?!?!? I'm running ROMeOS without sync issues. Granted I don't sync anything, but when i open device center the device does show up. I always check this, because if the device isn't seen by WMDC, I can't get data connections while connected to USB. I have this problem a lot because I removed WMDC from startup as I don't want an app running in the BG taking up resources when I don't use it.
actually what i did was flash my rom through micro sd because my phone wouldnt load to the home screen so i wasnt able to connect to aactive sync. thank god i got my wife a tp2 also wich i was able to dl the nnhb file on the micro sd card and then just run it from my phone but yes i did flash my rom way too many times during this past weekend id say about t times in a days is there a limit of times you can flash a device per day because i dont want to fry my phone up lol silly me
ariel123 said:
actually what i did was flash my rom through micro sd because my phone wouldnt load to the home screen so i wasnt able to connect to aactive sync. thank god i got my wife a tp2 also wich i was able to dl the nnhb file on the micro sd card and then just run it from my phone but yes i did flash my rom way too many times during this past weekend id say about t times in a days is there a limit of times you can flash a device per day because i dont want to fry my phone up lol silly me
Click to expand...
Click to collapse
For future reference, you don't need to flash via SD if you are stuck. Just follow these steps.
1) Power Off
2) Hold down Volume Down button
3) Plug in USB Cable
4) Boot Loader appears onscreen & at button in White space says "USB"
5) Flash ROM via PC as normal.
yea but its not going to be connected to active sync so how do i get the nbh file onto the phone unless i can just run the ruu and it will flash
ok now everytime i try to flash my rom back to the stock one through micro sd it starts the process but then the back light turns off and then the phone stays off and i have to hard reset it can someone help me and when i connect it to the pc it has the bootloader but it says error on the bottom of the screen
do i have to flash my radio back to stock also?
I had the same problem... luckily t-mobile has a buyers remorse program... because I could not get the active sync/WMDC to work either... did you download the wifi cab on another thread? I ask because this is what did it for me? Or maybe a combo of cabs but definately linked to the wifi cab... Gettin a new phone today... if anyone figure this out, make it a sticky!
Related
Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!
few people have seen this - no solution as yet.
Best workaround is to use the SD Card update method. No USB connection required.
todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.
dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes
I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.
this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.
Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID
The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works
dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.
@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.
I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)
I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers
Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.
Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!
Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers
Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse
hey guys,
i've problems to update my pocket pc to mobile 6. I tried both methods no one works for me.
First i tried to connect my pocket to my pc and started windows mobile center. Downloaded all the files, but always when i start the update, my pocket goes to the boot screen with the red, freen and blue stripes and the connection disconnects. And i get the message 260 update problems and my pocket stays at the boot screen. Than i tried the same with Windows XP and ActiveSync, the same problem again.
After that, i tried to update with a micro SD card 2GB. I downloaded the "Hard-SPL-V7"-File and saved it to the micro SD. Rebooted the Pocket, but nothing happend, the pocket stayed in the boot screen. Than i renamed RUU_signed.nbh in HERMIMG.nbh and tried it again, nothing happens.
Can somebody help me please? I want to use mobile 6, because i want to use a 8GB Micro SD.
EDIT: THANKS A LOT, but now i have a new Problem i described it in post #6 in this thread. Thank u 4 helping me.
EDIT II: Thank u all, i fixed it by myself. Finally the upgrade worked with XP and ActiveSync. The best thanks to ultramag69 again, he solved my problem.
If you are using vista you need to install this, removing all older versions
Do you have the newest .net framework on your computer from here?
You wont be able to flash via SD without HardSPL, so you need todo it via activesync.
Try another USB port.
Try flashing the shipped from for your device, you can get your newest WM6 rom from here.
If that fails, tell us:
Whats your device (theres loads of different models of the Hermes)
Have you flashed anything before?
What rom is on your device atm?
What SPL do you have atm? (Hard or not)
Also check your serial number against this list for known problems.
There are certain steps needed to be taken. First is making sure your computer has the .net compact framework. Get it here.
Only then can you run hard spl from your computer.
Also, when you put on a .nbh file onto the microsd and rename it, you need to go into bootloader not reboot. You need to hold the power button and ok button while pressing the reset button with stylus...
I have got the same problem....
Using XP not able to flash neither via Active sync nor by SD card...
Stck at MRH 8.4...
Go to post 1160 on page 116 of this thread to flash Hard SPL using the sd card method - http://forum.xda-developers.com/showthread.php?t=296722
You can't flash using the sd card method without Hard SPL. To flash Hard SPl on you need to do an extra step - flash with soft SPL.
To flash the os just leave out steps 5 & 6 from the above post after you have Hard SPL installed...
Cheers...
Thank you guys for helping me,
A big thank to ultramag69, your post solved my problems. It worked great.
But now i have a new problem. I upgrated the SPL to HardSPL v7 (opipro 2.10). With the help from ultramag69 it worked perfect. Sooner i did the radio update with Micro SD - worked perfect too.
So finally i tried to update the ROM, downloaded the german ROM version from this Thread copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and did a reboot (ok, start and reset buttons) like i did it before. But it shows me at the screen only HERMIMG.nbh and BOOTLADER. When i start the update it runs 2 seconds and i get the message HERMIMG.nbh - OK BOOTLOADER - OK UPDATE COMPLETE. But it doesnt start the WM6 Update. Why not? Can someone help me again please?
I think the only file that's supposed to be on the microsd is the hermimg file...
not sure if having other files there will effect it like that...
Rollswap said:
... copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and... But it doesnt start the WM6 Update. Why not? Can someone help me again please?
Click to expand...
Click to collapse
the only file that you have to copy to your SD card is RUU_Wrapper.nbh (size: about 90 MB) after naming it to HERMIMG.nbh
note that this will up-/downgrade your Radio to V1.47.00.10 so you can also check other available German Versions with other Radio versions on the Hermes Wiki
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
alex8525 said:
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
Click to expand...
Click to collapse
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
zocster said:
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
Click to expand...
Click to collapse
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
alex8525 said:
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
Click to expand...
Click to collapse
Ok so what is the status of your device now, have you flashed back to official shipped rom?
Please try these instructions. also here please view.
If the sd card is more than 2gb it won't be recognised by bootloader. The os (wm06+) is able to detect and read sdhc but the bootloader doesn't.
Did you format the sd card fat32. I know a few people who swear black and blue they did but when I reformatted it, it was registering as being fat.
Did you copy ONLY THE .NBH file to the sd card and rename it to hermimg.nbh? Won't be recognised if you didn't.
These are steps I tend to go through myself as 1 little thing overlooked can mean either nothing happens or disaster....
Cheers...
Hello.
I have a problem regarding Active Sync just does not detect my phone(Touch Pro 2) and so I can not upload new romu. Nor can I upload anything to the phone memory. Somebody knows another way to load a ROM. Or to fix this error?
I'm from Polish so my English is not as good.
Welcome aboard,
Try leaving marked just the 1st option on start-settings-connections-USB to PC
Other option is that you flash from micro SD card
I can not install the card as it pops up an error that I can not copy files.
orb3000 said:
Welcome aboard,
Try leaving marked just the 1st option on start-settings-connections-USB to PC
Other option is that you flash from micro SD card
Click to expand...
Click to collapse
fiflakk, what orb is saying is to check the DOT next to "ActiveSync (Sync with Outlook)", and UNcheck the BOX right below it next to "Enable faster data synchronization." I've attached a shot of that screen so you can see what it looks like...
I did as you say, but I still can not detect the active sync
fiflakk said:
I did as you say, but I still can not detect the active sync
Click to expand...
Click to collapse
We'll need some more details:
-What version of windows/activesync are you using? For XP and older, you need "ActiveSync", but for Vista or Win7 you need the new version called "Windows Mobile Device Center"
-What exactly happens when you plug the phone in via USB? Does your PC respond in anyway, even just to give error messages? What messages does it give you?
-Does anything appear on the phone screen?
-Have you tried a different PC, or different USB ports on the same PC? Or a different cable?
-Has it ever recognized this phone on this PC in the past?
fiflakk said:
I can not install the card as it pops up an error that I can not copy files.
Click to expand...
Click to collapse
have you got a sd card reader for your pc?
also here is a link to ms site to dl the latest software
http://www.microsoft.com/windowsmobile/en-us/help/getstarted/getstarted.mspx
thanks for the help but just be advised the soft installed to close
i had a similar issue where i could not connect to activesync but could connect as disk drive. tried pretty much everything, my non connectivity was happening becoz i was running dot fred taskmgr and clearing the notifications. had to hard reset and active sync was back. i tried it a few times, as soon as i delete notifications i would lose activesync. stopped using that and now no problems, still have to figure out how to delete notifications and keep activesync alive.
Hi, I installed android to my touch but now I'd like to go back to window mobile. I haven't been able to figure out how to flash it back to windows... any help?
Thanks
reflash a winmo build.
I'd love to reflash to a winmo build, but i just don't know how.
search. read the wiki's @ the top.
why go back anyway?
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Long story short. i'm trying android again to see if the newest build has better battery life. the last build couldn't hold a charge long enough to make it worht while as a phone.
The only way i've ever gotten android to get data after being flashed has been to get it working in windows first and then installing android.
i've read and searched for a step by step on how to do this and i just haven't been fruitful.
just download and flash one of the 6.5 builds....there's a very informative guide on how to
The guides that i see want me to establish an active sync connection to flash the device but I have android installed and i cant' establish an active sync connection. I think thats my major hangup. Is there a way to flash it from the memory card?
not that Im aware of.. my have to RUU back to stock and start over.
look here for sprint rom http://shipped-roms.com/shipped/Vogue/
That would be just fine too... i still don't know how to do it. When i run the rom update utility it gives me a connection error.
Edit: I realize that i'm being vague. Let me try to fill in the gaps. I am putting my phone into the bootloader mode, hooking it up to my PC via USB and running the Rom update Utility with a custom rom. The phone has been unlocked so it really shouldn't have any trouble..
What am I doing wrong?
moperist said:
The guides that i see want me to establish an active sync connection to flash the device but I have android installed and i cant' establish an active sync connection. I think thats my major hangup. Is there a way to flash it from the memory card?
Click to expand...
Click to collapse
Put your phone in Bootloader Mode by pressing the Camera and Power buttons and then the Reset button all at the same time.
Then make sure you have a radio of 3.4x or above... If not Flash back to a new stock Rom and then follow the threads you were just reading.
If you radio is good go and Download one of the ROMS here on this forum.
Happy Flashing!
P.S Please Ask your Questions in the Q and A section of this forum.
moperist said:
That would be just fine too... i still don't know how to do it. When i run the rom update utility it gives me a connection error.
Edit: I realize that i'm being vague. Let me try to fill in the gaps. I am putting my phone into the bootloader mode, hooking it up to my PC via USB and running the Rom update Utility with a custom rom. The phone has been unlocked so it really shouldn't have any trouble..
What am I doing wrong?
Click to expand...
Click to collapse
Make sure it says usb at the bottom of the bootloader.
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
moperist said:
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
Click to expand...
Click to collapse
No problem.
Glad you got it figured out!
moperist said:
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
Click to expand...
Click to collapse
No bother....learning experience.
so what was the problem?
so what was the problem because I'm trying to get from android to win 6.5 and the computer is saying that my xv6900 isn't hooked up even though on bootloader it says usb...any help would be great
How to Flash a Vogue without ActiveSync
How to Flash a Vogue Without ActiveSync
A method so easy my Mother could do it.
Not suggesting there's anything wrong with my mother, just that she's not all that technically oriented.
Here's an easy way to flash your HTC Vogue without using ActiveSync. It would likely be a great method to use if you had many Vogues that all needed to be updated as well. Works great for those not using Windows, as well.
Look around for a Transflash (aka MicroSD) card, one that you can erase, 2GB or less.
Use your Windows machine to make sure it's freshly formatted as FAT32]
Copy the ROM you want to flash to the card.
Rename the file you just copied to VOGUIMG.nbh If you are flashing a different model, you need to be sure you have the right file name for it. I think the pattern is the first 4 letters of the model name with IMG.nbh after it, but if it doesn't work, don't blame me,
Put card in phone.
Enter bootloader mode by holding the CAMERA and POWER buttons, while pressing the RESET button in the little hole in the bottom of the phone. (don't bother to connect it to your computer)
Enjoy a caffinated beverage of your choice, or an alcoholic beverage of your choice, or heck, a nice tall glass of cool water while you wait.
Watch as your phone automagically flashes itself!
Congratulate yourself on a job well done.
This is what I'm going to use from now on for flashing with a Mac or Linux. For those addicted to flashing, you can even take a collection of cards with you. I'm not yet sure if you can have multiple ROMs on one card, and just rename the one you want to flash or not yet, but I'll likely find out soon.
ATTENTION:
Missing any of these will make it NOT WORK:
Card must be normal SD, not SDHC or XDHC. No bigger than 2GB
Card must be formatted with FAT32. They often come formatted FAT16 or plain FAT, and a previously-used card could have just about any format on it -- NTFS. HPFS. HFS+. EXT3 -- Format it right to be sure.
Be sure you have the right name. I've heard that CaSe cOuNtS -- the name above has been cut/pasted from a working reflash card.
There is no #4.
Have fun!
Oh yes, just in case:[Lawyer]You are responsible for your own actions. This information is provided as a public service, and I wave all responsibility for it's correctness or how it is used. If you brick your phone, it's your fault. If your phone explodes, not my problem, but I'd like the remains.[/Lawyer]
Gr1zz said:
How to Flash a Vogue Without ActiveSync
A method so easy my Mother could do it.
Not suggesting there's anything wrong with my mother, just that she's not all that technically oriented.
Here's an easy way to flash your HTC Vogue without using ActiveSync. It would likely be a great method to use if you had many Vogues that all needed to be updated as well. Works great for those not using Windows, as well.
Look around for a Transflash (aka MicroSD) card, one that you can erase, 2GB or less.
Use your Windows machine to make sure it's freshly formatted as FAT32]
Copy the ROM you want to flash to the card.
Rename the file you just copied to VOGUIMG.nbh If you are flashing a different model, you need to be sure you have the right file name for it. I think the pattern is the first 4 letters of the model name with IMG.nbh after it, but if it doesn't work, don't blame me,
Put card in phone.
Enter bootloader mode by holding the CAMERA and POWER buttons, while pressing the RESET button in the little hole in the bottom of the phone. (don't bother to connect it to your computer)
Enjoy a caffinated beverage of your choice, or an alcoholic beverage of your choice, or heck, a nice tall glass of cool water while you wait.
Watch as your phone automagically flashes itself!
Congratulate yourself on a job well done.
This is what I'm going to use from now on for flashing with a Mac or Linux. For those addicted to flashing, you can even take a collection of cards with you. I'm not yet sure if you can have multiple ROMs on one card, and just rename the one you want to flash or not yet, but I'll likely find out soon.
ATTENTION:
Missing any of these will make it NOT WORK:
Card must be normal SD, not SDHC or XDHC. No bigger than 2GB
Card must be formatted with FAT32. They often come formatted FAT16 or plain FAT, and a previously-used card could have just about any format on it -- NTFS. HPFS. HFS+. EXT3 -- Format it right to be sure.
Be sure you have the right name. I've heard that CaSe cOuNtS -- the name above has been cut/pasted from a working reflash card.
There is no #4.
Have fun!
Oh yes, just in case:[Lawyer]You are responsible for your own actions. This information is provided as a public service, and I wave all responsibility for it's correctness or how it is used. If you brick your phone, it's your fault. If your phone explodes, not my problem, but I'd like the remains.[/Lawyer]
Click to expand...
Click to collapse
i do as yousay after i put it in bootloade mode it says loading for a split seconde then goes back to bootloader i need help i have android with no data i read that i need to reinstill wm get data working their then re install android i cant get wm back on this phone im going on 3 days trying to flash this yes its unlocked
Ok I am stumped...my wife just got the Droid Inc. a couple weeks ago and I pretty much immediately did the following:
Root it
Install SetCPU, used "Perflock Disabler" & setup profiles
Install "Autostarts" to disable some uneeded serivces & widgets at boot
...it wasn't until recently that I attempted to plug her phone into our computer (Win7 x64) so I could start to sync some pics, etc. to it. Unfortunately, whenever I plug it into the computer I get the "Do you want to install the VZW Drivers?" which seems to work. I see (2) additional removable drives show up however I just get the "Please insert a disk..." message.
Is there something I am not doing right? or is her phone borked?
I'm used to just plugging my DX into the computer and the SD card mounting itself without any problems.
I'm trying to get the OTA installed on her phone and keep root using the steps listed here (http://solo.dc3.com/dinc/) which I've seen posted on numerous Android forums sites.
Ideas? Help?
/bump
Anyone?
Try going into "computer" in the start menu on your computer and see if it lists the removable storage. If you still can't access them then you'll probably have to do a slow format on them. If that don't work then I would try plugging it into a different computer and if that don't work then I would re-flash the phone with the Verizon RUU from your computer. That's all I can come up with. If anybody else has any suggestions that would be cool.
You could also try pulling the card out and using an adapter to put it in your computer and see if it's the card itself. That's all I got.
ejdavis72 said:
Try going into "computer" in the start menu on your computer and see if it lists the removable storage. If you still can't access them then you'll probably have to do a slow format on them. If that don't work then I would try plugging it into a different computer and if that don't work then I would re-flash the phone with the Verizon RUU from your computer. That's all I can come up with. If anybody else has any suggestions that would be cool.
You could also try pulling the card out and using an adapter to put it in your computer and see if it's the card itself. That's all I got.
Click to expand...
Click to collapse
I mentioned above that (2) removable drives show up when the phone is plugged in
I haven't tried plugging it into a physically different computer but I also did reboot over to Ubuntu 10.10 and I see 2 storage devices mount (labelled as "HTC Android Storage Device"...or something along those lines.) Unfortunately double-clicking them and right-click-> Open doesn't do produce any results either.
I'll give it a shot on our laptop (running XP) to see if that produces anything...but I'm doubtful.
I'm trying to avoid a RUU restore because I'm know she'll get annoyed...and I'm trying to avoid the wife's wrath & eye rolling
I'm fairly sure that the card is being read by the phone but then again I could be wrong...not sure if HTC Android phones save photos to the internal memory or not.
P.S. - In case some starts thinking overwise...I'm no computer n00b.
Plug it in, go to device manager, find the 2 things listed for the phone under disc drives. Right click them both and select update driver software. Then on the popup window select to search automatically.
That should work.
dpwhitty11 said:
Plug it in, go to device manager, find the 2 things listed for the phone under disc drives. Right click them both and select update driver software. Then on the popup window select to search automatically.
That should work.
Click to expand...
Click to collapse
Funny...I almost did that yesterday but I was instead pointing the driver update to the HTC sync folder instead which wasn't working. Btw are you referring to letting it scan the computer for the drivers or doing a search online?
JagoX said:
Funny...I almost did that yesterday but I was instead pointing the driver update to the HTC sync folder instead which wasn't working. Btw are you referring to letting it scan the computer for the drivers or doing a search online?
Click to expand...
Click to collapse
It'll automatically search online.
dpwhitty11 said:
Plug it in, go to device manager, find the 2 things listed for the phone under disc drives. Right click them both and select update driver software. Then on the popup window select to search automatically.
That should work.
Click to expand...
Click to collapse
That's a good idea! I didn't even think of that. Ha ha
ejdavis72 said:
That's a good idea! I didn't even think of that. Ha ha
Click to expand...
Click to collapse
...and that didn't work either. All I get is a message saying that the best driver (Disk Drive) is already installed
I had the Android SDK installed as well (back when I rooted my DX) and made sure there were no remnants from Motorola or HTC...but no luck.
I'm stumped!
I'm going to try pulling out the SD card to see if that works...
Ok...so plugged the phone into our WinXP-based laptop with no previous drivers installed, (2) removable drives showed up but was unable to access the drives.
Attempted to update the "HTC Android Phone USB Device" entries in the Device Manager by having it look online...no dice.
The SD card appears to be ok though because I can read it just fine by pulling out the card, using an SD card adapter & popping it into the laptop...I can see all the cards contents without problem. I know that the phone sees the card properly too (obviously) b/c I can also access the SD card via Astro.
I'm not using the same USB cable every time either so I'm sure that isn't the issue either. I've used both my DX USB cable and the USB cable that came with the DInc.
Anyone else have any ideas?
This seems blatantly obvious, but I'm just gonna throw it out there because I haven't heard it mentioned. But by all the symptoms, it seems like the phone is mounted as charge only, not as a disk drive. Does it say it's mounted as a disk drive in the notification pulldown on the phone?
Come on now...give me some credit Of course I've checked that...I do have a rooted & custom ROM on my DX afterall.
I've also tried setting it to USB Debugging mode as well...no dice
Haha yeah I figured you checked it, but who knows. Brain farts are a common occurence these days. The symptoms just matched so well!
Anyways...I read this somewhere: Hit the Mobile Broadband Connect option and see if does anything. Also, another blatant one, restart both the phone and the computer. Also, make sure it's set to ask everytime you connect, and default to disk drive.
That's all I got tho...good luck sir.
ozzman54 said:
Haha yeah I figured you checked it, but who knows. Brain farts are a common occurence these days. The symptoms just matched so well!
Anyways...I read this somewhere: Hit the Mobile Broadband Connect option and see if does anything. Also, another blatant one, restart both the phone and the computer. Also, make sure it's set to ask everytime you connect, and default to disk drive.
That's all I got tho...good luck sir.
Click to expand...
Click to collapse
I know figured people would think it would be as simple as that...but if it was that simple of a fix I would've figured it out by now
I tried the Mobile Broadband option and that doesn't do anything...no pop up or prompts. I've tried restarting both the PC and the phone almost every time and no luck and the phone was set to "disk drive" as well for most of my attempts. I've also had it on "ask" for some of the attempts as well.
I also noticed that when I plug in the phone sometimes and it prompts to install some software that it doesn't appear to do anything. All I get after the install is done (at least I think it's done) is show me a Windows Installer window with different commands for quiet installs, debug installs, etc. and then just an "ok" button.
Have you tried installing the newest HTC Sync to see it it would install or update the drivers? I've never been faced with a problem like this so I'm just trying to cover all bases.
ejdavis72 said:
Have you tried installing the newest HTC Sync to see it it would install or update the drivers? I've never been faced with a problem like this so I'm just trying to cover all bases.
Click to expand...
Click to collapse
Yup I've tried that too with v2.0 & the latest version (v3.0) and in both instances it shows "disconnected" even after a reboot of both the phone and the computer.
Here's one more thing, not sure if you've already checked into this...but is there any VCast crap installed on her phone? I just read on another forum that someone removed the VCast Media Manager with a similar prob and it fixed it. (you probably already read the same forum lol)
ozzman54 said:
Here's one more thing, not sure if you've already checked into this...but is there any VCast crap installed on her phone? I just read on another forum that someone removed the VCast Media Manager with a similar prob and it fixed it. (you probably already read the same forum lol)
Click to expand...
Click to collapse
Hmm hadn't read that to be honest but just off hand I don't think it has the VCast software on the phone. I'll check tonight when she gets home.
Well I guess if none of this works then looks like you're gonna have to deal with the dreaded eye roll while running the RUU. Ha ha sorry we couldn't get ya going.
ejdavis72 said:
Well I guess if none of this works then looks like you're gonna have to deal with the dreaded eye roll while running the RUU. Ha ha sorry we couldn't get ya going.
Click to expand...
Click to collapse
Dammit...lol...guess I'll have to cook dinner & let her hog the TV then so she can't complain as much