Related
Hello,
my universal screen is stuck
after Ivan's (3.5)rom upgrade
i pressed the 2 softkeys and reset button
i got the press 0 to clear memory
I press 0 and then the universal does not start up
plz plz plz help me
I was trying to understand what is mtty tool but never understood
some kind person plz help...
thankyou (anxiously waiting for reply)
corleno said:
Hello,
my universal screen is stuck
after Ivan's (3.5)rom upgrade
i pressed the 2 softkeys and reset button
i got the press 0 to clear memory
I press 0 and then the universal does not start up
plz plz plz help me
I was trying to understand what is mtty tool but never understood
some kind person plz help...
thankyou (anxiously waiting for reply)
Click to expand...
Click to collapse
Iv managed to get into bootloader
I run mtty
my only problem is I have COM1 and COM2 in dropdown
no USB
can some 1 tell me why ??
please
corleno said:
Iv managed to get into bootloader
I run mtty
my only problem is I have COM1 and COM2 in dropdown
no USB
can some 1 tell me why ??
please
Click to expand...
Click to collapse
When it Bootloader mode, there are some words on screen, check if it is minimum v1.00 and above.
When in Bootloader mode, activesync is off, but you can run the upgrade software.
CWKJ said:
When it Bootloader mode, there are some words on screen, check if it is minimum v1.00 and above.
When in Bootloader mode, activesync is off, but you can run the upgrade software.
Click to expand...
Click to collapse
thank you for ur reply
it says v 1.00
activ sync is off
but I donno how 2 set up mtty
because I have only com1 and com2
no USB
i guess i need to get USB>
on screen whn i press enter
but i dont get anything
I tried rom upgrade,
the system says device not recognizable
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
CWKJ said:
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
Click to expand...
Click to collapse
yes I finally managed to enable USB
and I use
USB>set 14 0
then I get this
HTCST ÚÈÒHTCEUSB>
I try normal upgrade with ROMUpgradeUt got error 101
now I try with MaUpgradeUt_noID.exe after replacing the 3 files from the country_error folder
I get error saying the upgrade is not designed to run on my device
CWKJ said:
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
Click to expand...
Click to collapse
Thank you CWKJ
Iv got the system to work again
thanks
I re-flashed with my old O2 rom and no mitty required
just boot loader
You are welcome. Hope it is of any help.
I have the same problem!
But after have this problem, I log in to bootloader and up rom beta 15 again (old rom), after up rom beta 15 finished and everything is ok! I start re up rom (3.5) for again and everything is good! now, i'm running 3.5, it's very very good, faster, bigger memory...! Thanks to Mr.Ivan so much!
quanss78 said:
But after have this problem, I log in to bootloader and up rom beta 15 again (old rom), after up rom beta 15 finished and everything is ok! I start re up rom (3.5) for again and everything is good! now, i'm running 3.5, it's very very good, faster, bigger memory...! Thanks to Mr.Ivan so much!
Click to expand...
Click to collapse
Uv got some bal*s dude
Iv shi* my pants the very 1st time
Im too scared 2 go back..or is it front
I m having big troubles with my Universal. I m stuck in the Bootloader screen. When I try I hard reset (pressing 2 softkeys and reset and than 0 he says 'clearing now' for only one second and than switches back to the bootloader screen! I ve tried to upgrade it with MAUpgrade_NOID.exe. He than upgrades I think my OS only but after this a hard reset doesn t help! I keep getting stuck in the bootloader screen! I ve also tried a hard reset without the SIM and SD card but this don t help either......
Now what.......
have you tried set 14 0
I saw something like that. Can you explain how to a bit more specific?
sanderh said:
I saw something like that. Can you explain how to a bit more specific?
Click to expand...
Click to collapse
Hi,
Read this thread and follow the step by step instructions to reset your DOC Table.
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
After completing the above please re-flash the Rom you wish to use.
When flashing Roms to your Uni, it is always best practice, to remove the SD Card and enter BootLoader mode before flashing.
Cheers,
Beasty
Try the little tool attached. It's from the wiki.
Here's how to use:
1. disconnect USB cable from your device
2. disable USB connection in ActiveSync
3. reconnect USB cable
4. wait some 30 seconds
5. run the tool
6. If successful, device will boot itself.
Has worked for me every time.
Psi
Had this issue today. Couldn't flash any rom and was stuck on the bootloader screen. Try flashing a shipped rom for your phone. That helped me. After flashing original I was able to flash WM6 rom using ROMUpgradeUt.exe.
Try a diferent cable.
If you get when connecting for a second usb, than changed i to the serial, try a diferent cable - its normal miniusb.
Then go to wiki and download UNI_ExitBootloader.exe.
Maybe will work.
If yes give a masage.
KR.
Lukasz
beast0898 said:
Hi,
Read this thread and follow the step by step instructions to reset your DOC Table.
http://forum.xda-developers.com/showpost.php?p=1097645&postcount=4
After completing the above please re-flash the Rom you wish to use.
When flashing Roms to your Uni, it is always best practice, to remove the SD Card and enter BootLoader mode before flashing.
Cheers,
Beasty
Click to expand...
Click to collapse
Thanks man, that really helped. My qtek9000 got stick at the bootloader's screen and i couldnt perform an upgrade. I followed ur instructions and now it is upgrading. waiting for the results.
thanks again
yeap, everything went fine.
Completely stuck without any UBS communication
Hi everybody,
Since i tried (yesterday) to flash a new UNIVERSAL 2.12 WWE ROM, i 'm stuck in Bootloader. I had this bloody Country ID error and after that, the USB connection between my Universal and my PC went wrong and ... i tried all the solutions given here and there :
1/ an exitboolader.exe tool
2/ the mtty option
3/ tried to kill all the process linked to AS in a way or another
4/ made several Hard Reset - connection - changing cable and so on ...
The main problem is that Windows XP is not able to recognize my Universal anymore SO ... i can't even try the solutions above based on an exiting commication thru USB between my PC and my PPC ...
I only have : "Serial" and "V1.0" on my pocket PC
Any idea to establish an USD relation between the universal and my PC ?
Pls help ... i missed this bloody device ;-/
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
Hello,
My HTC 3300 is blocked on Windows start screen.
I have hard reboot my device and un screen with 3 color appear.
When i plug my device with USB cable, my computer play a song to inform my device is well connected.
But when i launch Artemis USPL, a popup appear with the message : "No Device Connected : Would you like to try copying again ?" Yes, No, Cancel.
I'm blocked a this step.
Can you help me ?
Thx
PS: Sorry for my bad english. I'm french guy.
hi guys,
i have the same problem....
I was trying for the first time to upgrade my Artemis!!! I DIDN'T DO THAT!!!!
Please help me!
TNH
USPL only work if you are in WM. It doesn't work at the booloader.
Zecanilis said:
USPL only work if you are in WM. It doesn't work at the booloader.
Click to expand...
Click to collapse
yes... i know
i am reading.... i am looking for a solution.
I read on the POF USPL guide that probably (Unfortunately ) this problem should be caused by same PDAmobiz tool!!!!
i am being funny!!!
yet another bricked artemis owner
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
zikizile said:
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
Click to expand...
Click to collapse
It solved my problem: I've played around with some dll's on my Artemis and it won't boot anymore.
Just one thing: you must type password BsaD5SeoA, cause it's case sensitive.
THANK YOU VERY MUCH!!!
Hi guys,
i fixed my problem!!!!!
i flashed an official ROM (1.12.405) using a SD card (512mb)
now i'm going to work with ARTEMIS_USPL!!!! WOOOOWWWW
owner of a brick called artemis
glad it helped you solve problem...
when I was young I use to poke with programming...
but that was looooong time ago (remember zx spectrum?48 kb ram..haha)now you got it in your pocket(working if you're lucky guy, not like me)
Any way, point is:
never give up!!!!
Yes, I agree with you: NEVER GIVE UP!!!!
I'd like to help you, i'm not expert people on this work...
I just read a lot of good indications on this forum.
Good Luck
Thanks man,
I'm trying to find another motherboard,before I start playing with this one.
Maybe you know where to get one for artemis?(arte 200)Or someone with broken screen not willing to repair it?
cheers,
z
Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.
Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.
Power+Camera+reset button with ur touch pen
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734
manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!
Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.
problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx
slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life
i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english