Hi, Ihave installed the new official rom but now I have this problem:
On my computer on the bluetooth icon I add the TyTN but when I try to create a remote connection I don't find the "com port" to strat the connection.
In the modem option the TyTN is not present.
Someone can help me?
Thank you
Sounds like the official ROM doesn't support DUN. Use Internet sharing option instead. TyTN should show up as a Bluetooth PAN device. YMMV depending on who makes your laptop BT stack.
Sleuth255 said:
Sounds like the official ROM doesn't support DUN. Use Internet sharing option instead. TyTN should show up as a Bluetooth PAN device. YMMV depending on who makes your laptop BT stack.
Click to expand...
Click to collapse
Thank you
Yes it is the problem and then I try using TyTN INTERNET SHARING as a PAN bluetooth PAN device. NOW works fine and I can connect to internet.
Thank you
galaxyweb said:
Thank you
Yes it is the problem and then I try using TyTN INTERNET SHARING as a PAN bluetooth PAN device. NOW works fine and I can connect to internet.
Thank you
Click to expand...
Click to collapse
Yes it is the problem and then I try using TyTN INTERNET SHARING as a PAN bluetooth PAN device. NOW works fine and I can connect to internet.
Thank you
BROTHER .. HOW TELL ME HOW U DO IT ... COZ I AM SEARCHING A LOT ABOUT IT
PLEASE ... I SHALL BE VERY THANFUL TO UR KINDNESS.... !
Related
hi,
can i use my dash as a wireless modem for my laptop over cable, bluetooth ?
cheers,
cudo
yes, but you need to do so by setting up a Bluetooth PAN
rabilancia said:
yes, but you need to do so by setting up a Bluetooth PAN
Click to expand...
Click to collapse
can u explain in more details , please ?
cudo
This works with my laptop, YMMV:
1. Enable Bluetooth PAN on the laptop, go into bluetooth settings and enable it there.
2. Pair the phone with the laptop, using a secure connection.
3. One the phone go to Start>Accessories>Internet Sharing (click the icon).
4. Before you hit Connect (left soft button), be sure that PC Connection is set to Bluetooth Pan and Network Connection is set to T-mobile Data.
5. Hit Connect, now on the laptop, double-click or right-click and hit connect on the shortcut for the phone PAN Icon.
6. It should say Status: "Connected" on the phone.
7. Surf to your heart's desire if you have unlimited data.
Wifi
Will this also work with the Dash's wifi? I mean i have another pda with bluetooth and would like to be able to use the dash's wifi to browse.
thank you, jehlinger!
Bluetooh Dun Works!
I have bluetooth dun working on my devices using the the newly released 080308 6.1 ROM.....!
So, after some hours of reading, I decided not to use bluetooth for modem, but I'd like to use my XDA Trion with LVSW 3.30 WM6 as a modem with usb cable.
I have XP, and a laptop.
This rom doesn't contains Wireless Modem icon.
I tried to swith off active sync usb connection, after I got a USB device, name: "HTC USB Sync"
But this is not a modem, and I cannot use it as a modem.
I read about on Xda-Wiki from a USB modem dialer, but I tried, it uses own old USB modem, so this USB Sync doesnt work with this.
I am also not sure, that this is a modem what I need.
I have a UMTS/HSPDA simcard inside, it works perfectly with XDA Trion, but I also would like to use it as a modem.
Anyone can make me clear what I have to do?
Thanks in advance.
Internet Connection Sharing
It is now called Internet Connections Sharing!!! I have used it once or twice and it does work.
stukes said:
It is now called Internet Connections Sharing!!! I have used it once or twice and it does work.
Click to expand...
Click to collapse
I didn't think, that this is so easy, but works perfectly.
Thanks
Any info on this please?
Was working fine with Vista lappy on WM5 but can't get it working with WM6. Any pointers appreciated.
Thanks
I noticed 'internet sharing' application in WM6 does not support IR, but only Bluetooth and USB. Anyway to enable IR connectivity for wireless modem like in WM5?
No
alanchia67 said:
I noticed 'internet sharing' application in WM6 does not support IR, but only Bluetooth and USB. Anyway to enable IR connectivity for wireless modem like in WM5?
Click to expand...
Click to collapse
IR isn't on the list for ICS because it's not stable enough for a "routed" data connection. BT Pan is by far the easiest,USB is not subject to BT interference. If it isn't in the list, you're going to have to use what is. (states the obvious)
All,
I just got my p3300 and successfully flashed wm6. COOL.
However I have a problem now and don't know if it is wm6 issue or my own net work:
with my laptop I can connect fine wirelessly to my router
With my p3300 and through usb through my laptop I can internet as well.
My p3300 sees all wireless networks fine, but cannot connect to my network.
I input all settings, have the correct passwork and key index. The phone tries to connect, but after 20 seconds responds that I have used the incorrect network key.
I tried using manual netork ip adress. then the phone does connect, but I cannot open an internet page.....
What am I doing wrong?
Patrick
I had the same problem. At the end i restarted my router and the connection worked fine.
Hi
How you do it? To flash wm6
I try but now my pocket not work.
Can you help me?
Thank you!
@ gradskia:
look on the site here, there are many helps to get you allong, but don't forget to load:SPL (USPL) v.01 - Another way to flash *ANY* rom to your device!
http://forum.xda-developers.com/showthread.php?t=311403
@akismal
I resretted the router,no succes. I also tried open/shared, 64/128 bit, and hex or normal.
Nothing seems to work te get the password accepted.
Anybody?
pwvandeursen said:
@ gradskia:
look on the site here, there are many helps to get you allong, but don't forget to load:SPL (USPL) v.01 - Another way to flash *ANY* rom to your device!
http://forum.xda-developers.com/showthread.php?t=311403
@akismal
I resretted the router,no succes. I also tried open/shared, 64/128 bit, and hex or normal.
Nothing seems to work te get the password accepted.
Anybody?
Click to expand...
Click to collapse
I'm facing the same problem at work with a 3Com Wireless route. At home I use ZyXel and wifi is working OK. Did you manage to find a solution?
802.11b and g
kostas_jp120 said:
I'm facing the same problem at work with a 3Com Wireless route. At home I use ZyXel and wifi is working OK. Did you manage to find a solution?
Click to expand...
Click to collapse
I haven't had any problems - but make sure that your router accepts 802.11b connections as well as 802.11g
TangerineTractor said:
I haven't had any problems - but make sure that your router accepts 802.11b connections as well as 802.11g
Click to expand...
Click to collapse
+1
Mine was struggling to connect to my router and when i checked the wireless settings it was set to Auto 108Mbps. After changing it to g & b all is fine now...........hope this helps.
Cadburys Man said:
+1
Mine was struggling to connect to my router and when i checked the wireless settings it was set to Auto 108Mbps. After changing it to g & b all is fine now...........hope this helps.
Click to expand...
Click to collapse
This is strange . Most probably is my 3Com router in the office that has the problem - it is setup as 11g. At home ZyXel is 11b. Artemis ROM is BB4.1 with 802.11g enabled.
Hello,
I did a search and didnt find much, I also checked on Wiki and they explain how to use it as a modem via bluetooth dial up networking. I would like to use the bluetooth PAN feature in Internet Sharing but cant get it to work.
Firstly, I got the bluetooth dongle connected with the Bluetooth PAN. It tells me that they are connected and communicating with each other, the bluetooth software (bluesoleil) even provides me with an ip address, however when I try browsing on my laptop I get the message page cannot be displayed...
Can anyone please shed some light as to why it does not work?
Thanks a lot!
EDIT:
Seems like when the connection is established it gives the windows bluetooth adapter a weird ip address
like: 169.254.6.198
but I checked in network adapters of the 8525 everything is set for ip addresses to be assigned automatically .. strange..
in windows xp its also set to assign the ip address automatically :S
im not sure what else to do..
Launch Internet Sharing on your Hermes & set the PC connection to bleutooth PAN. Now, make sure the Network Connection is set to your correct data connectiion and press connect. It should say "Waiting for connection" Next, connect your PC & Internet Sharing should show "Connected". If you still can't surf then its a bluetooth driver issue on your PC. The built in M$ bluetooth stack (XP SP2 & >)works correctly with bluetooth PAN for sure. YMMV on others. The latest Toshiba BT stack definitely works too (based on pesonal experience).
Sleuth255 said:
Launch Internet Sharing on your Hermes & set the PC connection to bleutooth PAN. Now, make sure the Network Connection is set to your correct data connectiion and press connect. It should say "Waiting for connection" Next, connect your PC & Internet Sharing should show "Connected". If you still can't surf then its a bluetooth driver issue on your PC. The built in M$ bluetooth stack (XP SP2 & >)works correctly with bluetooth PAN for sure. YMMV on others. The latest Toshiba BT stack definitely works too (based on pesonal experience).
Click to expand...
Click to collapse
Hey,
Thats exactly what I did, and it gets connected on both ends..assigns a weird ip address.
I tried a few Roms, but now I am using urs the latest one dev 3.2
Always was a fan of your roms, but I cant get that bluetooth pan to work.
I also tried with WIDCOMM and Bluesoleil...
I get no where..
Anyone please??
Help!!
I guess I'll have to bump this thread to death in order to get some help !
man i had the same problem never got it figured out so if any one could help would be great
fb.knight said:
man i had the same problem never got it figured out so if any one could help would be great
Click to expand...
Click to collapse
Which bluetooth dongle you used...just curious?
Which chipset?
Ok, guys, got the problem resolved..it was the sucky bluetooth adapter from ebay "ISSC bluetooth adapter", piece of crap.. went to walmart got a usb 2.0 device for 25$ and all is well now.
Hi,
I haven't managed to get BT internet sharing working between the TP2 and my laptop. I've been trying to create a BT personal area network that enables internet sharing. Whenever i select the internet sharing option, it claims my laptop doesn't support it.
This is bogus, because i had the same laptop with the same setup working just fine through my old Tytn II. You just enabled internet sharing and away you go! How HTC have managed to mess this up is baffling (and annoying!). Trouble is i need to route my laptop through my phone or it's not very useful.
Is there any way that is known to work?
Thanks for any ideas,
Don't know if this is feasible in your situation, but can't you just use the USB cable and ICS? Tethering through BT would be slower and less reliable than using the cable.
It is easy but I'm not sure if you aware about the new widcomm btooth settings applet. In the 3rd tab, select Networking Manager > Share Internet Connection > Follow On Screen > Done.
I am having the same problems and I have tried the network manager > share internet connection but no luck. what makes my case worse is that i have the Toshiba bluetooth stack. any ideas?
gotta try that with tp2 btw yesterday when i tried to send some files from tp2 to my old hermes (tytn) it didn't work because tp2 claims 'device does not support a suitable service to perform this operation'. however the bt-link between my lap-top and tp2 or tytn works fine and i have used the internet sharing many times with my old tytn
so maby the are some issues with the newer bt? dunno
Eureka! I have manged to get a connection and i am posting this over it. But I tried so many things that I am going to have to delete the connection and start all over again so I can create a step by step guide for anyone that may be intersted. Test enviroment is TP 2 WM 6.1 (obviously) and Toshiba laptop with Toshiba stack running Vista.
You have the same problem as i did if you will get the error msg 'remote device does not support bluetooth PAN' and have a toshiba bluetooth stack. I should be back soon. Wish me luck so I dont mess up everything.
1. Enable BT on TP2 and make device discoverable
2. On laptop right click BT icon --> options --> General --> select PAN networking service
--> yes --> ok.
3. On laptpp right click BT icon --> add new connection --> custom mode --> next --> select your TP2 --> next --> select group ad-hoc network --> next --> next --> finish.
4. On your device --> open ICS --> select bluetooth PAN --> select your PC from list of BT devices --> accept connection on PC.
You should be good to go at this stage cos it works for me. If you dont mind leaving the PAN networking icon on your taskbar then you only need to do step 1 and 4 anytime you want to share your internet connection otherwise it will be step 1, 2 and 4.
Good luck and I hope someone finds this useful. I also hope in the future there will be an easier and more straightforward way to connect. There probably is now but I just dont know it. Half bread they say is better than none. cheers
If the fix from lombardo8 does not work/apply to you - try the following:
1) Setup/ connect an ordinary BT serial port from your PC to the phone.
2) Use the Widcomm BT applet as monx suggested above to setup the rest.
I have found that I cannot initiate any BT activity from my phone to the PC without a connection made from the PC to the phone first - even though the PC and phone both use Broadcomm stacks!
Also my Tytn II worked perfectly with my PC so likely not to be a PC problem.
Hope this helps...
lombardo8 - you are the dude!
this worked! indeed, i too am running the toshiba BT stack. it's the one i found before worked. I had tried creating all sorts of new connections from the PC settings, but the difference you have found is in the BT options/general settings.
Strangely, the "select PAN networking service" box was not checked. i guess this explains why PAN networking wasnt active. however, what is strange is that this must have worked before using my old TyTn II without this setting.
So once this is enabled, it makes a connection fine!
with regard to wire tethering, this is always a handy fallback, but i have found that BT usually worked quite well, once set up and working, additionally you dont need a wire.
For the life of me i cannot get it to work with my work notebook running Win7 and my netbook running Win7 & OSX
It's driving me nuts
Why can't they just leave it simple. Damn Bluetooth 2.1
Is there any chance somebody can have a .cabs to install back the old internet sharing where there is a Bluetooth PAN in the drop down list. I figured that would be alot easier.
I had the same issues with TP2 and a Mac Book Pro. It works perfectly on Windows XP on this machine but not in OSX. I found a solution for OS X though:
http://forum.xda-developers.com/showpost.php?p=4101986
Thanks for the info but now i'm getting the error msg below
"Failed to establish Internet Sharing connection to remote devices as it supports only Network Access Point (NAP) mode"
What does that mean and how do i configure it in OSX?? Appreciate any help with this as i need ISC in OSX.
Well it means that TP2 thinks that your Macbook offers the internet sharing and not the TP2. I get that same message until i kill the blued and tick that mark again. Then it works until next reboot where i have to repeat the sequence again. Which OSX Version and hardware are you using btw?
Seems the new Snow Leopard fixes some issues with bluetooth. I re-paired my TP2 with Snow Leopard and this works like a charm out of the box. No more fiddling with the bluetooth daemon. Let's see if it stays that way
Just disable DHCP on laptop/PC PAN & u r ready to go.
Scann69 said:
Is there any chance somebody can have a .cabs to install back the old internet sharing where there is a Bluetooth PAN in the drop down list. I figured that would be alot easier.
Click to expand...
Click to collapse
Yes bro. v1.11 will have this feature but still Widcomm stack & bt PAN working 100%
Bluetooth ICS Windows 7 WinMo 6.5
I'd like to chime in here. I've flashed several 6.5 ROMs, but with the 23016 and 23017 sys roms I can't seem to connect bia BT ICS. The USB cable works fine. It seems that my netbook does not acquire an IP address from the TouchPro. I'd sure like to find a fix for this as I use this technology all the time.
@izzyforreal
see my post above. did u disabled dhcp on ur netbook bt pan profile?
monx® said:
@izzyforreal
see my post above. did u disabled dhcp on ur netbook bt pan profile?
Click to expand...
Click to collapse
Hi monx!
How do you disable DHCP on the PC's BT PAN profile? I'm using Widcomm/Broadcom firmware 2.1.211.299 by the way.
And if I do disable it, how will the PC get an IP address??
Thanks,
- Shay
skamin said:
Hi monx!
How do you disable DHCP on the PC's BT PAN profile? I'm using Widcomm/Broadcom firmware 2.1.211.299 by the way.
And if I do disable it, how will the PC get an IP address??
Thanks,
- Shay
Click to expand...
Click to collapse
I've found the solution here. Not using the "Internet Sharing" application though but a couple of nice hacks. IT ACTUALLY WORKS!!!
See attached ZIP with files and that post quoted.
- Shay