BA hung at startup screen!!! - MDA III, XDA III, PDA2k, 9090 General

Hi,
I have just upgraded my Blue Angel's (BA) ROM to the WM5 AKU3.5.2 R5 Rom Kitchen v2 last night, but start having issues already!
There are a couple of scenarios that I found the BA will hang at the startup screen when the Windows Mobile logo appears.
1. The first scenario was when I changed my battery. I turned off the screen, pull the battery out and replaced it. The BA hung!
2. I installed SPB Pocket Plus 3 and uses the embedded RESET function (icon) to restart the BA. Every single time I did it, the BA hung. (And I have tried more than 5 times. It really started to piss me off!)
The only solution that I can get back to the WM5 system was to give my BA a hard reset! The paid was to LOSE ALL the programs I have installed!
Has anyone experienced this before? What was wrong with it?! Did I do something ridiculously wrong or just another bug (a big one!) of the ROM? If it's a bug, anyone has a smarter way to get around it rather than hard resetting the BA before the fix comes out?
Many Thanks!

Spent hours on it!!!! Resolved by upgrading the ROM to the latest AKU3.5.2 R5 Rom Kitchen v2 and use the default setting with "BuildOS.exe".
Cheers

Related

TyTn sticks in flight mode is it a WM 6 ROM bug?

Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
moving to hermes.
Alabama978 said:
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
Click to expand...
Click to collapse
Do a Hard Reset then test the ROM out for a few days. If you are not satisfied with it try one of the cooked WM6 versions (since they are superior).
Thanks
I will play with it as you suggest, also forgot to mention the keyboard no longer illuminates :-(
My radio too is an old version 1.03.03.10. Should I upgrade it first before flasing another ROM ( I have Hard Spl loaded OK)
After adding all my email settings for different accounts and loading apps I don't feel like a change of ROM for a few more days ;-)
Thanks,
Al
i think the problem is with your radio, try any radio at least 1.23 and above
I've been on WM6 since the second day I had my hermes, about 3-4 months ago. I've been on 4 or 5 different trips on planes requiring flight mode. Various LSVW and Sleuth ROMs used with various radios from 1.38 and on...
Not once, despite many layovers, have I had an issue with the phone not coming out of flight mode.
So, in my experiance, no, not a WM6 bug.
Alabama978 said:
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
Click to expand...
Click to collapse
I have almost the same problem, but in my case it doesn't ask for PIN code. If I disable PIN request, everything is fine. Try to do the same and see if it's OK. This is the first ROM with this behaviour, but I can live with it in exchange of the amazing speed and phone respondivness !
I haven't seen this problem, but I do see a problem with opening a data connection after being in Flight Mode. It tries to connect to the provider 3-4 times (with quick connects), and then fails with an unable to connect message. At that point, I need to reset in order to connect to data again.
seems to be like the same problem that i am having!! i think its linked to the SOD bug, my herm100 continously reboots the 'radio' part of the phone.. when making a call the phone shows full signal however after placing the call the signal drops before connecting and it searches again for network... im sure that the phone is doing this whilst in standby mode too (maybe linking to the SOD problem) and since you've got you pin request on it seems to be cycling and asking for a pin code!! hope we can find a solution i've tried a few things but nothing seems to cure it!
Did anybody find a solution to this? My TyTn does the same

WM6 Freeze Screen

Hi, I have a dopod 838pro and recently upgrade to Schap's 3.57a WM6 Rom. It was working fine for the past 2 months, until today where it blackout completely. I soft reset the phone and after the startup screen, it just stop at the windows mobile screen without booting into the system. None of the keys work and i have to take out the battery just to turn the phone off.
Tried a hard reset and the result is still the same. I can't sync with activesync nor do much from the phone.
Anyone out there who has experience something like this and maybe a workaround of it.
Highly appreciate if someone can help. Thanks!!!
After a few hard reset and some luck i manage to get it working again. thanks

Strange behaviour then touchscreen doesn't work under Schap's WM6

I upgraded my Vario II (T-Mobile, UK) to Schap's WM6 (v 3.54a) a few weeks ago and everything was fine. But in the last couple of weeks I have noticed two things - the phone occasionally ran exceptionally slowly (only cured by a reset) and the battery ran down at an alarming rate (around 12 hours with limited Internet (3G) access).
This morning I cleaned the screen (using some spray I use to clean my glasses and a cloth) and a couple of hours later the screen stopped responding to touches. Completely dead although I can navigate using the hardware button and D-pad.
I have five questions:
1. is this a known problem?
2. has it anything to do with WM6?
3. is there anything I can do to fix it short of returning my phone?
4. if I return my phone (it's under warrenty) must I restore WM5?
5. if so, how best to do this?
Thanks in anticipation of a response.
Bobby
First reinstall wm6 and check things out, if your problems are still there, then yes its best that you reinstall your wm5 and take it to your dealer.
Thanks for the advice. I re-flashed my phone but no difference - the screen is still touch-dead.
So I guess that it's a hardware fault.
I plan to downgrade the OS to WM5 but I have also changed the boot screen (to the HTC one) and I need to go back to the original T-Mobile (UK) boot screen. Can anyone tell me how to do this?
Cheers.

Touch Pro 2 Turns off randomly

I have this new T-Mobile Touch Pro 2. I currently have the Stock European ROM (6.5) on it. Before that, I was using the TMO 6.5 version. My problem is that the phone randomly freezes/dies/turns itself off while sitting idle. And every time it happens, I either have to soft reset it or take the battery out and put it back in to turn it back on. Simply pressing the power button doesn't do anything. Funny thing is that this phone is a replacement that was sent to me by T-Mobile because my first device was doing the same thing (which I had for about a month). T-Mobile tech support was just as lost as me. Can anyone here help me?
I have the exact same problem! Have you found a solution or at least learned the cause of the problem ?
Phone turns off ramdomly
Hi
I have the same problem the phone is shutting down ramdomly without any warning and i have to use the power button to turn it on again
any solution guys ??
Did you task29 the rhodium before flashing the new rom?
Sometimes flashing the new rom doesn't clear the memory properly leaving traces of old files to foul up the operation. Flashing task29 before flashing a new rom will stop this.
After you flash task29 there will be NO os on the rhodium. You will need to pull the battery, Put it into bootloader and then flash new rom from PC or use sd card method.
Cheers...
I have exactly the same problem, 2-3 times a day, I need to soft reset it. The phone was working well until I moved from 6.1 (original) to 6.5; I believe the new radio has issues. Any recommendation, flashing the radio does not solve the problem.
I used to have 1-3 SODs a day. Now I have only one SOD a month. My solution was to remove compact framework 3.5 and that weathersolution where you can add new cities. By the way; I upgraded to WM 6.5. Before the upgrade I had no SODs.
Sorry to bring up an old topic, but I recently acquired a Touch Pro 2 (RHOD100, original HTC model) and having exact the same issue. There's no saying when it's happening, but always during an action. Had it when pressing the End key after a call, when pulling the Usb cable from the device, and during other things too.
Hardware seems fine, battery is firmly in place and contacts are fine, and clean.
Having factory WM 6.5 Rom on it. And like mentioned before, I also do have Compact Framework 3.5 installed since it's required by some of my software.
Anyone ever found a solution that's confirmed to solve the issue?
I'm sorry for bumping up an old thread but after doing a search this was the first one that was listed which isn't 'That old'. I have just bought one of these phones, brand new, from factory. It comes with windows 6.5 and runs the OS version for the phone is - 5.2.21887 (21887.5.0.86) The phone seems to randomly just shut off without notice and to be able to turn it back on again to use it, I've got to take the battery out and put it back in again, then it will be able to turn back on. When the phone does enter the state of completely turning itself off. I have noticed that my notification LED light does flash green, I don't know why it does this. But if anyone has some help for me to sort this problem out and enable me to use my phone perfectly then that would be great!
Yet again, sorry for bumping up an oldish thread

Blue Angel crashes

Well my MDAIII turns itself off or crashes. Mostly on the HTC screen from the new 6.5.5 Rom from D-Two. This problem persists since the first WM6 rom I flashed on the system.
Sometimes it crashes on the screen with the four colors. SOmetimes in the touchflo or in settings.
Everytime the screen goes black and you see some stripes. When I put out the battery and stick it back in it runs until the HTC boot logo or one of the other mentioned above.
When I clean the Registry Hive and format the Storage. The BLueAngel runs a bit longer without crashing.
The battery is still at 60 percent.
Is this a known problem?
Also I think that I need a new microphone. The one in the BlueAngel is defect. No one can hear me. When I put a Headset in to socket on top. Everything is fine.
Similar Problems
Hi,
I know, that won´t help U, but my Blue Angel has similar problems.
I´ve tried 6.1 Manila and 6.5.5.
Both run well and then, without any obvious reason I get a black screen.
In 6.5.5 the reset lead to a hang and showed R None G None D 6.5.5
After a further reset it showed R 1.1.5 G 1337.45 D 6.5.5
but it didn´t boot at all.
WLAN didn´t work at all in 6.5.5, so I´ve turned to 6.1 + Manila.
But there my device also hangs up, but I can reboot it.
Sadly the Blue Angel don´t run stable and crashes also, like in 6.5.5 without any obvious reason.
Maybe d-two can help, but I´m a new User and not allowed to post in the rom-developer forum.
Stay tuned
Greez from good old Germany

Categories

Resources