WM6 Freeze Screen - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi, I have a dopod 838pro and recently upgrade to Schap's 3.57a WM6 Rom. It was working fine for the past 2 months, until today where it blackout completely. I soft reset the phone and after the startup screen, it just stop at the windows mobile screen without booting into the system. None of the keys work and i have to take out the battery just to turn the phone off.
Tried a hard reset and the result is still the same. I can't sync with activesync nor do much from the phone.
Anyone out there who has experience something like this and maybe a workaround of it.
Highly appreciate if someone can help. Thanks!!!

After a few hard reset and some luck i manage to get it working again. thanks

Related

GREEN Button swaps to CALENDAR

Recently I am experience and incredible fact.
The green button to start a call NOW works as CALENDAR shortcut button (yes like the top right button)
The red button to END a call NOW works as CONTACT shortcut button (yes like the top LEFT button)
The 2 Contact and Calendar button (top left and right) DO work correctly.
I supposed some recently installed applications made this mess. Therefore I tried
- soft reset: no way
- hard reset: no way
- I PUT MDA 3 in BootLoader mode and I REINSTALLED MY rom 1.42 WWE
Now what happened is that for 2 days OK, the GREEN and RED button DID work correctly to start and end CALLS.
After 2 days, the strange phenomena appeared again!
Please note that I HAVE NOT INSTALLED ANY ADDITIONAL SOFTWARE!
I am very puzzled.
Please help
Saulo
Maybe a virus?
Any suggestions for this problem?
I am getting crazy at this behavour...did i get a virus?
Thanks and waiting
Saulo
I got it to the second time yesterday, but it just went away.
The first time it happened I did a hard reset 2 times and that didn't fix it.
The battery had to die completely
Is it a known issue ofr ROM 1.42?
Thanks and waiting
Saulo
did you try to REFLASHING ????
I was actually going to downgrade because the problem never happened in 2003, but my battery was dead when the battery was charged enough to start the buttons worked correctly.....
The second time it happened it just went away after a few hours (I was driving so I couldn't mess with it) when I got home it was back to normal.
Re: Maybe a virus?
saulo866 said:
Any suggestions for this problem?
I am getting crazy at this behavour...did i get a virus?
Thanks and waiting
Saulo
Click to expand...
Click to collapse
Have you recently installed any software, let me know maybe it is related to some software??
Do you know how to UNLOCK the ExtROM and then install 1.42 o
Yes I have installed Windows 2005. Then since very unstable, I downgraded to Win2003, 1.42 (not the original 1.31
Now, in addiiton to his strange fact, (flipping buttons) I experience the flickering of screen, several times a week. A soft reset usually solves this new problem. But then it may reappear.
I installed the following softwares: CE Chinese Input
I thought it was the culprit, therefore i made a HARD RESET.
Then I tried other sfw, also trial Chinese Inputs.
But again this problem reappeared
Now I made a clean HARD RESET and NO sfw.
The problem reappeared.
Conclusion:
I guess something wrong in External ROM.
In fact in Device Information:
ROM version 1.4200 WWE
Radio 1.13.00
ExtRom: NONE
Do you know how to UNLOCK the ExtROM and then install 1.42 on it?
Thanks
Saulo
i have the same problem today. it has happened before. i think it is a glitch in the rom. i have hard reset and it went away before. this time no. i have hard reset and restore my backup and same thing. the culprit could be a bad wisbar install. that is what i think i did wrong, i installed wise bar and did not reset (forgot). then this morning woke up to the send button going to calendar. any suggestions. thanks.
i have the same problem today. it has happened before. i think it is a glitch in the rom. i have hard reset and it went away before. this time no. i have hard reset and restore my backup and same thing. the culprit could be a bad wisbar install. that is what i think i did wrong, i installed wise bar and did not reset (forgot). then this morning woke up to the send button going to calendar. any suggestions. thanks.
I get a similar thing but my green button opens TomTom navigator
I also upgraded to WM5 and then back down again to the 2003 1.42

Please Help, Problems with Phonebutton

Hi everbody,
first sorry for my english. i am german.
So now, this moring my MDA 3 has made an hardreset and since there, when pushing the phonekeys, contacts and calandar are opening!
So what could i do? I had made an Rom-Update (newest from T-mobil germany) but nothing helps.
Could I change this settings manually in the regestry? Any Ideas?
Thanks for responding.
Schralle
OMG THE SAME THING'S HAPPENING TO ME TOO! It just happened.
I have a Cingular Siemens SX66 (PH20B1) with
ROM v1.33.10 WWE
Radio v1.02.10
ExtROM v1.33.110 WWE
It just suddenly soft-reset, but now the phone answer (green) and phone end (red) buttons don't work and open Contacts and Calendar simultaneously. Furthermore, my navigation keys don't work either! Whenever I push it in any direction, it automatically loads up the Contacts. The other hardware buttons work fine, though.
I tried restoring from a previous backup, and that didn't work. Then I tried doing a hard reset and not restoring a backup, and that STILL didn't work. I then did a restore from a backup after my hard reset and nuthin!!! I'm at a COMPLETE loss....this is startin' to scare me...any ideas? ANYONE?
Thanks!!
--Q
How did you guys go with your probelms.
I have a similar problem with mine after a low battery experience.
My buttons are only working sometimes, especially the multi-directional button.
I have read I should try a new battery, but haven't got one yet.
DLC
Turns out mine had just died. The buttons just didn't work, and it was very likely a hardware problem. I got a replacement in the end.
Good luck!
--Q

XDA Orbit Freezes on Reset

Hi all,
I recently received an O2 XDA Orbit. The Orbit works fine, except that sometimes on doing a soft reset it will hang at the green "Windows Mobile 5.0" welcome screen.
I have left it for periods of time in excess of 30 minutes, and eventually the XDA becomes completely unresponsive (backlight doesn't come on when pressing buttons etc). On doing a consecutive reset, it does exactly the same thing. The only way to resolve it is to do a complete hard reset.
This initially happened when using Sprite Backup. Before doing a backup the program resets the device, and this exact same thing happened. I thought it would be to do with the software, however i have not installed Sprite since but i am getting the same symptoms.
A relative of mine got an Orbit at the same time and hers is having the same problems, yet another relative received one a few months before and his is fine.
I was wondering if anyone else is having this problem, or if anyone can suggest a remedy for it?
I got my orbit too recently but it did not freeze at startup but a white screen flashed up for a few secs. I did a hard reset and then before the o2 extras get installed - a\3 sec countdown will appear on the screen do a quick softreset - stylus in the soft reset hole.
I reckon that will solve your problem as its prob due to the o2 extras.
Nexim said:
Hi all,
I recently received an O2 XDA Orbit. The Orbit works fine, except that sometimes on doing a soft reset it will hang at the green "Windows Mobile 5.0" welcome screen.
I have left it for periods of time in excess of 30 minutes, and eventually the XDA becomes completely unresponsive (backlight doesn't come on when pressing buttons etc). On doing a consecutive reset, it does exactly the same thing. The only way to resolve it is to do a complete hard reset.
This initially happened when using Sprite Backup. Before doing a backup the program resets the device, and this exact same thing happened. I thought it would be to do with the software, however i have not installed Sprite since but i am getting the same symptoms.
A relative of mine got an Orbit at the same time and hers is having the same problems, yet another relative received one a few months before and his is fine.
I was wondering if anyone else is having this problem, or if anyone can suggest a remedy for it?
Click to expand...
Click to collapse
Was it plugged in when it hung?
It happens both when it is plugged in to my laptop, and when it isn't connected to anything at all.

BA hung at startup screen!!!

Hi,
I have just upgraded my Blue Angel's (BA) ROM to the WM5 AKU3.5.2 R5 Rom Kitchen v2 last night, but start having issues already!
There are a couple of scenarios that I found the BA will hang at the startup screen when the Windows Mobile logo appears.
1. The first scenario was when I changed my battery. I turned off the screen, pull the battery out and replaced it. The BA hung!
2. I installed SPB Pocket Plus 3 and uses the embedded RESET function (icon) to restart the BA. Every single time I did it, the BA hung. (And I have tried more than 5 times. It really started to piss me off!)
The only solution that I can get back to the WM5 system was to give my BA a hard reset! The paid was to LOSE ALL the programs I have installed!
Has anyone experienced this before? What was wrong with it?! Did I do something ridiculously wrong or just another bug (a big one!) of the ROM? If it's a bug, anyone has a smarter way to get around it rather than hard resetting the BA before the fix comes out?
Many Thanks!
Spent hours on it!!!! Resolved by upgrading the ROM to the latest AKU3.5.2 R5 Rom Kitchen v2 and use the default setting with "BuildOS.exe".
Cheers

artemis enable bluetooth problem

Hi all!
I have some kind of weird problem with my artemis. Once I try to enable bluetooth, device hangs in bluetooth dialog with animated progress icon. The only one way to get it out of it is soft reset. After soft reset commanager just silently refuses to run. wi-fi and bluetooth is unaccessible but phone works fine. blue led flashes for few minutes. also I can't add new contacts and do click and hold in explorer - it hangs with circle of rounds after it.
device restores it state on hard reset or rom update. all actions mentioned above work fine till next bluetooth try.
I tried both official WM5 and WM6 with same result.
any clues?
lexasa said:
I tried both official WM5 and WM6 with same result.
any clues?
Click to expand...
Click to collapse
If you tried hard resets with both - WM5 and WM6 it must be hardware problem. I use WiFi and BT PAN networks everyday with my Artemis and both Windows (HTC) ROMs.
i have same problem, twice i have had to hard reset, it works okay for around a week then the bluetooth stops working.

Categories

Resources