Hello!
Sorry for my English - I'm russian and my English is not perfect.
I have HTC Artemis. Device is working fine... I wanted to test another microSD card. I press and hold power button, confirm the device turn off. Device is turned off. But at this moment I decide copy some files from my microSD and try to turn on device back....
Device is dead! No actions on any buttons. I try to press Power button, combination for hard-reset, try to take away and place back accumulator/SIM/microSD, try to connect external power... Nothing!!!
What I can do for device on?
PS. Firmware is standart russian version (1.12...), no installed overclock tools...
Related
Hi folks,
Can anyone help me?
I was using BSB 6.5L WM6.5 on my Diamond and i had some problems with that.
Mainly, my Diamond was "hard reseting" the manufactures settings everytime i turned it on.
So i decided to downgrade it to WM 6.1
At this point i started to have serious issues.
I installed Rom 1.93xx and just after the uptade, my Diamond froze in the first black screen (Touch Diamond and radio/Rom version).
Even if i do the hard reset, it freezes again in the boot screen.?
So, how could i go back to the Rom i was using before or install another one?
My Diamond is useless now... Hope someone can help me.
Thanks
should've used search, this is also a wrong forum for this topic.
with that said, power off the phone, press and hold power, volume down and reset until you see the tri-colour bootloader screen, connect the phone to your PC, you should be able to flash at this point.
do report back.
Japex said:
Hi folks,
Can anyone help me?
I was using BSB 6.5L WM6.5 on my Diamond and i had some problems with that.
Mainly, my Diamond was "hard reseting" the manufactures settings everytime i turned it on.
So i decided to downgrade it to WM 6.1
At this point i started to have serious issues.
I installed Rom 1.93xx and just after the uptade, my Diamond froze in the first black screen (Touch Diamond and radio/Rom version).
Even if i do the hard reset, it freezes again in the boot screen.?
So, how could i go back to the Rom i was using before or install another one?
My Diamond is useless now... Hope someone can help me.
Thanks
Click to expand...
Click to collapse
What technote said is incorrect, doing that will just cause it to try and read from the Internal Storage, what you want to do is what I did when I had the exact same problem;
With the phone on the frozen screen - make sure the USB cable is DISconnected, open ActiveSync/WMDC on the PC and in connection settings, disable USB connections. Now press the red reset button on the phone and as the phone is turning on (before it vibrates - 'touch Diamond' splash), you need to press Volume Down once, don't hold it. Just press it once. Now plug the USB cable in when the tri color screen appears, and Serial should be written near the bottom. Renable USB connections in ActiveSync/WMDC and then flash a ROM. All should work.
Thanks...
It worked flawlessly....
incredulous said:
What technote said is incorrect, doing that will just cause it to try and read from the Internal Storage, what you want to do is what I did when I had the exact same problem;
With the phone on the frozen screen - make sure the USB cable is DISconnected, open ActiveSync/WMDC on the PC and in connection settings, disable USB connections. Now press the red reset button on the phone and as the phone is turning on (before it vibrates - 'touch Diamond' splash), you need to press Volume Down once, don't hold it. Just press it once. Now plug the USB cable in when the tri color screen appears, and Serial should be written near the bottom. Renable USB connections in ActiveSync/WMDC and then flash a ROM. All should work.
Click to expand...
Click to collapse
When i do this, it still keeps going to the splash. I reset, press vol down, and it continues to go to the splash. If i do it the other mentioned way, power, reset, vol down i get to the tri colour screen.
how to enter in bootloader = press volume down and reset simultaneous !
link
From this site wm 6.5 toshiba g810 portege is for rom corrected install computer device with a connection was interrupted while I was waiting, and I did not correct the data cable was disassembled after the device was opened what what hard reset soft reset I can not do nothing for the upgrade was done completely right, but my devices boot screen After a more closed will not open, please help.
You must enter in DSUU mode, when turn on phone, HOLD Record button + Volume down button, then press 9 to enter in DSUU, after launch Flash software!
Bye.
My brother dsuu mode phone can not receive in any way will not open key audio recording and sound reduction would press not only the computer bagladıgım When the device is red ışıgı next to the computer does not see the device after a period of light is flashing and the computer sees the device data interface device, install software says
No more idea...... Sorry
Please help ...
Any MOD please delete this Thread!
Cant see anything to help here .....
Sorry ... sorry..
I turn the phone off, press the power button and volume down ... I don't see any HBOOT menu.
I have change the option to disk drive (under PC connection) ..
First Volume Down (hold) then Power!
What did you want to do?
Flashing Recovery Image with Unrevoked?
I am trying to
(1) unroot using Painless root by UnrEVOked
(2) flash a cooked ROM
Did you downloaded the hboot driver?
http://www.unrevoked.com/rootwiki/l...unrevoked.com/recovery/android-usb-driver.zip
U should connect your Desire to pc and mount USB Storage and only after this run unrevoked.exe in admin mode Hboot mode should enter automatic.
Sry for my english ;-)
Edit: I think u want to root not unroot ? =)
The steps is as follow
1) Download the unrEVOked modified USB driver and expand it somewhere you will remember.
2) Turn off your phone, then boot it into the HBOOT menu by holding power and volume down.
3) Connect the phone to your Windows machine with a USB cable and wait for the phone to say HBOOT USB PLUG on screen
I am stuck at #2
You are completely powering the phone off first, aren't you? Then hold volume down and tap power keeping volume down held until hboot comes up.
Try put your device Power Down and start it with back + power then select Hboot mode with power button.....This should help ;-)
please help.
i try to install froyo rom.
after flash FroYo_inkreDroid (14.07.2010) rom (throught standart flashrom procedures by update.zip) the device will not boot into os. i try update modem and after this the device win not booting to hboot menu.
i try press both combination (back key + power and volume down + power). the result of both combination is: 7 short vibro signals and black screen.
please help me, how me recovery my device.
thnx and sorry for my english.
HTC Desire Loop problem
Hi All,
Been reading the threads, having had this problem with my HTC desire:
Went to a Boot Loop this morning and I haven't yet performed the CLEAR STORAGE function. Called HTC to complain that I have to loose my data and asked them if they can help deleting some of the data on the phone's own memory, so I can restart it. I think the problem occured when the low memory message appeared. From HTC told me that they cannot do that for legal reason.
Does anyone know how I can access the phone memory, delete some data and then restart it, rather than CLEAR STORATE it, since I will loos all my sms and phone book, setings, etc...
Please if you know, let me know.
Thanks you
Plamen
To boot your Desire S into hboot by holding ‘back’ button down, your SIM card should be inside the phone.
I have registered my account to ask this question. I have been flashing roms since I bought desire a month ago. But this time I flashed the chinese version of MIUI rom from their official website. They didn't even mentioned on their site that this is Chinese and official version of the rom.
My question is, how can I connect my USB cable to connect to the computer and then copy some other rom to my memory card. ( I don't have memory card reader/adapter). I tried to connect it but it's showing charging icon on the status bar, I then tap on that icon and there were some on/off options I tried to change them in both states but the device is still not connecting to the computer in USB mode. I am bit afraid because I am experiencing this strange problem that I haven't found fix on the net.
P.S: Sorry for my English and please reply urgently I can't even use my phone with this chinese version.
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
ser.clansman said:
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
Click to expand...
Click to collapse
I have to connect my phone with pc, so I can put another rom on the sd card and then flash it. Is it possible to do this via recovery? If yes please guide me how do this.
Thanks
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
ser.clansman said:
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
Click to expand...
Click to collapse
Thank you so much, I use the option Mount USB storage and put my rom on the card and I have finally come back to some English rom. Thanks it worked.
Hello all i need your help if anyone knows.. before some day i buy an Ascend P6 from Ali express and i asked about Greek Language and they say me that its with it. but when i received the phone No greek no Google Play.. i contact with seller and he send me step by step how to put new firmware with language and Google Play..
At the middle of upgrading the phone just turn off and now when i turn it on only vibrates all the time and the touchscreen dont respond.. only the side buttons Vol + - and Power the phone turn on normally and starts the android in Chinese language but i cant do nothing cuz no touch.
i tried to open it in recovery mode pressing Vol - vol + and power and there only vibrates and i cant see any SD card i do wipe factory and cash but the same... only Android recovery (3a)
and the phone never shut down when i keep pressing the power button the phone only restart and turn on again... i have to wait battery to go 0% and the phone shout down by self.
anyone help?
Absolut22 said:
Hello all i need your help if anyone knows.. before some day i buy an Ascend P6 from Ali express and i asked about Greek Language and they say me that its with it. but when i received the phone No greek no Google Play.. i contact with seller and he send me step by step how to put new firmware with language and Google Play..
At the middle of upgrading the phone just turn off and now when i turn it on only vibrates all the time and the touchscreen dont respond.. only the side buttons Vol + - and Power the phone turn on normally and starts the android in Chinese language but i cant do nothing cuz no touch.
i tried to open it in recovery mode pressing Vol - vol + and power and there only vibrates and i cant see any SD card i do wipe factory and cash but the same... only Android recovery (3a)
and the phone never shut down when i keep pressing the power button the phone only restart and turn on again... i have to wait battery to go 0% and the phone shout down by self.
anyone help?
Click to expand...
Click to collapse
It is vibrating at huawei's logo ? If yes then ur phone is bricked.
To install Firmware Download it from website. Through sdcard reader put update.app in dload folder in sd card. Now drain battery and charge. Insert sd card in phone. Press vol+ Vol- and power button. It will flash the firmware. Simple.......
hannanzikrea said:
It is vibrating at huawei's logo ? If yes then ur phone is bricked.
To install Firmware Download it from website. Through sdcard reader put update.app in dload folder in sd card. Now drain battery and charge. Insert sd card in phone. Press vol+ Vol- and power button. It will flash the firmware. Simple.......
Click to expand...
Click to collapse
i did it but the phone cant see the SD card. pressing vol+ vol - and power take me to android recovery (3a) and the only thing i can do there is to reboot system all other dont work...
and no is not vibrating at huawei's logo.. its vibrates from the moment i press power on button the phone start up normal takes me to the homescreen of the phone but i cant press nothing cuz only vibrates and no touch...
Absolut22 said:
i did it but the phone cant see the SD card. pressing vol+ vol - and power take me to android recovery (3a) and the only thing i can do there is to reboot system all other dont work...
and no is not vibrating at huawei's logo.. its vibrates from the moment i press power on button the phone start up normal takes me to the homescreen of the phone but i cant press nothing cuz only vibrates and no touch...
Click to expand...
Click to collapse
Then take it to service center. Can be hardware issue i think ..
Sent from my P6-U06 using xda premium