Hopeless HTC s621 - HTC Excalibur

I have my device unlocked already and have done many ROM upgrades before, this time my PC froze half way throught the upgrade. The device turns on and gets stuck on the T-mobile screen. It doesnt connect to active sync i cant even get Dashv2unlock to detect my device. Please help somebody.

from what i've read before about this type of issue (somewhat), try removing the battery and SIM for a few minutes, then replace and reboot and see if active sync recognizes it now.
if this info is no longer valid, I apologize.

I think you need to have your phone in bootloader mode and then flash again. Make sure the phone is off, and while holding down the camera key (to the right of the space key), connect the USB cable to your phone. The tri color bootloader screen should appear on your S620. Now run the upgrade file on your PC again.
Let us know how it goes....

im able to get to the tri color screen but when i start any Rom upgrade it gets to 3 percent and fails. I have also tried the SP-1.11 upgradeonly.exe and also the Dashv2Unlocker that i have paid for. Nothing

Related

HELP!!!!

:?
I tried to make an update with the file JASJAR_WWE_11353_137_10301
Suddenly the Display stop et 99% of the extended Rom Update and on my monitor was an infomation like "an error happend"
After this, nothing else happend .
Yes, realy nothing happens anymore. I cant start the device not with power, not with reset or with power+reset
nothing nothing nothing
What can i do
If i start to try a new update, it schows me no information about what rom etc. is installed or what will be installed. if i then start i get the notice, that it is the wrong device.
Help me please. ist there any way to put the mda back to live?????
I guess i dont only need an update but the complete software
HELP!!!
I have the exact same issue after the upgrade. Nothing will happen. I spent several hours trying resets, combination of button pressed, removed battery, resets, just to try to get back the boot loader mode but nothing is happening.
there has to be a way to do this and I hope someone on this board had that issue before and got it resolved.
I had a similair issue with my old XDA II, it turned out my storage card was corrupted. Use a card reader to check your storage card is OK, perhaps format the storage card (having saved any data first of course) and see how you fare
Have had the same problem wirh a radio ROM update on my QTEK9000. The anly thin that still worked was the hard reset. After the hard reset the device still did not respond. But when i connected it to the PC I could start the updateprocess of the original ROM. I took about 20 minutes for the whole procedure and than the Qtek9000 was back in factory default (Pffff and I could breath again).
So perhaps you can try a hard rest and then connect aganin to the PC.
I allready tried this!
But nothing happens.
Even if i put the power device or the usb into the mda, no LED schows anything. just sometimes the LED is red for not more than a minute. if it then goes out, i get the message "Unknown usb device" in my PC
Are you in bootloeader mode? Do you see the words USB or Serial on the screen of the Universal in Portrait mode. Note: Backlight is off so you have too look real hard, but it should be there
no, i see nothing.
I had quite a hard time yesterday while upgrading. The bootloader is very hard to see, use a torch to lite up your display. In portrait view on the top should be the word serial or usb, on the bottom v1.00.
I also did a hard-reset in this stage, but it just returned to the bootloader menue.
If I connect to the PC and the device is recognized I see the word serial in the display change to USB. For me I do not know the reason but my PC did not want to fulfill the upgrade process. Needed to take another PC (Laptop) to solve the problem. After the upgrade of the ROM, You still need to upgrade the Radio (this was my experience) before a cold-reset will put You back to business.
Good luck.
Ruud
Having the exact same problem as gary_b and having performed quite a few upgrades, I can confirm there is absolutlely nothing on the screen. The unit will not go into bootloader mode or even able to do a hard reset. It is not recognized when plugged in the USB.
When connected to power and the hard reset procedure is done, the red charging light will come up for less than 1/2 seconds and disappear.
I tried all different combination to make it boot but nothing. If I could at least get it to bootloader more, I can revive it.
Feel very bad I cannot help here.
I was wondering Yesterday about one thing. IF, during all this upgrading process, the battery runs out, (as it does not seem to charge during upgrade process) will it show bootloader screen ?
Would it be possible to get a loaded battery from somebody to check yours ?
That is a good suggestion to try out, but I have been unable to find anyone that has that device. It might be simply a drained battery.
Mine got corrupted I think at the end of the upgrade right after I did a regular reset instead of teh power and reset procedure.
However, I would think that even with no battery in, the unit should power back up when plugged in no?
Maybe an idea for somebody who is doing upgrading now, and is in bootloader status anyway.
Take out the battery, but connect with USB to PC with ASync. Does the bootloader state show ?
I am sorry to not do it for myself, if You saw my desperate state Yesterday, You will believe that I am not willing to see that bootloader screen for some time, sorry.
Ruud
now i know what to do:
Nothing!!
I went to a service-point with my mda pro and there was nothing to do with it.
If this happens the complete memory is "killed". Like "format c:" and while format is running you switch out the power.
Thanks god: I got a new MDA pro because i did not tell them (in the store)that i tried an update!
But i called the service-line before anf they told me that there is nothing to do!
But thx
Wow, can't say that this is good informatuin for those with this problem, but very glad it worked out for You.
I ve had this problem 5 minutes ago. Finally a took out the battery. Then connect to AC and Red led is on. Then i put the battery, tried hard reset and message to confirm hard reset in the screen (wellcome to life, jasjar).Then i run radio update again and it's upgrading rigth now....buffffff
I almost suffered a heart attack when this happened an hour ago. Have found that the update works fine if the SD card is taken out... phew.

Upgrade ROM code error

I have flashed many Custome ROM's before. I have HardSPL installed on my phone.
I tried flashing to a ROM (I forget which one now, I think Cloudfa or something) and it stopped at about 15%. The Update utility stopped as well.
I cannot connect to bootloader at all. I tried holding down on Volume down/Reset to enter bootloader, but the thing is that it's already in bootloader with the message "Upgrade ROM code error, Please try again"
ActiveSync doesn't see my phone either. In fact all it does is just sit on the bootloader screen with that error...
Please Help... Thanks You...
A normal soft reset still brings you back to Bootloader?
What happens when you plug in your device? Does it not change from serial to USB at the bottom?
band27 said:
A normal soft reset still brings you back to Bootloader?
What happens when you plug in your device? Does it not change from serial to USB at the bottom?
Click to expand...
Click to collapse
Sorry. Yes it does show USB when plugged in, but won't respond to anything that I have tried software wise. It does not switch from this bootloader/error screen at any point. Even after I pull my battery and turn it back on...
I have yet to come across a thread which has this exact problem...
jzalapski said:
Sorry. Yes it does show USB when plugged in, but won't respond to anything that I have tried software wise. It does not switch from this bootloader/error screen at any point. Even after I pull my battery and turn it back on...
I have yet to come across a thread which has this exact problem...
Click to expand...
Click to collapse
Have you tried flashing a different ROM while in bootloader?
^^ Yes. It give me an error on my computer...
I would like to try the internal flashing method but I don't seem to have a way of getting at my Storage Card.
I found this thread with a similar problem
http://forum.xda-developers.com/showthread.php?t=480022
I WAS just able to get off of that screen I was talking about, but the best I get is to the Touch Diamond Screen that lists my ROM and such. So no real progress.
I have a feeling that I would resolve my problem if I could Flash from the Interanl Storage...
Have you tried hard resetting the device?
Pull out stylus and Holding....1) Vol. Down 2) Center Round button 3) then press red button aka soft reset with stylus
Nothing...
im stuck
hi all i am very new to this im not sure what i have done or how to fix the problem i download these this morning and they worked
rom version 1.57.831.1(47324)wwe
radio version 1.14.25.24
protocol version 52.64.25.34u
when i bootload in tri colours screen it shows
BLAC100 32M
SPL-1.56.OliNex
MicroP-Blackstone (led)v6
if it shows that i must of done something right i think of what ill read
and i have windows 7 ulitmate and i have Miri_WM65_21815_V19.0_Premium
when i double click on the BLACKSTONE RUU WRAPPER it crashes then i rename a new folder and done it from there and it works but it comes up wit error 208 file open? then i got told to rename to ruu_signed.nbh file to blacimg.nbh and to store it in the root of my sd card done that then somehow i got it to come up to the screen by Turn off the phone, press and keep pressed volume down button and while keeping it pressed turn on the phone then i see a message "Press power to flash your device" and i press power to flash got to 0% and it crashed and come up with Upgrade ROM code error plz try again and stuck in bootloader mode but now it wont even turn on its dead it wont turn on no matter what i do can someone plz help
all i want to do is get windows mobile 6.5 working i cant understand that it can be so hard to do
thanxs blueboys25!

Tricolored Screen Madness!

i have the red, green and blue screen going on and no matter what i try to do its not doing anything, i tried to reinstall the OS and my pc wont detect any phone that is connected. is there anyway i can get this phone back to normal?
damn.. anyone please?
Hey crazy first thing i would try is to make sure you have active sync installed and the connection manager set to connect via usb. if you have it setup right active sync should recognize the phone whether the comp does or not as long as active sync sees the folders you can flash. secoundly use the search option for the forum to find related articles for the loader screen and flashing.
tri-color screen, that is Boot loader mode, where you can flash/ reflash your EXCA to a new rom. Make sure you install "Activesync", make sure you plug the USB cable to your EXCA.
When you plug the usb cable, the tri-color screen will change the "Serial" to "USB".
That mean, your computer has recognized your phone.
The rest of thing, you could spend little time to know: "HOW TO FLASH A NEW ROM SUCCESSFULLY?"
Good luck.

HTC One X doesn´t start anymore

Hello guys,
I am new here and thats my first post, please tell me when I do something wrong. But I think this is the best forum to ask :
I had a well-functioning HTC One X. But at once it doesn´t start and stuck in the HTC bootlogo. I googled it and after many days I try to unlock the bootloader. The bootloader starts only after many trys and then shows a red field "battery level is too low to flash"(connected to PC). The red led doesn´t lights up. I leave it in the bootloader and after many hours it starts normally (bootloader still locked). I set the phone back to factory settings (not in the bootloader). I used it like every day, but after hours when I switch to the normal menü it was stucked for 5 seconds and then the screen become black and it wont restart. I buy accumulator for the phone and exchange it (I have a little bit "hardware skills"). I connected it with loading cable to the socket (not the PC!). The red LED flashes for a second and then happens nothing. After many trys the bootloader shows up (connected to my PC) and I googled for almost hours to find a solution. "I have to install a custom ROM". I unlocked the bootloader with the programm "One X All-In-One Kit v2.3". I don´t know why but I shut the phone down. I try to start the phone or the bootloader but it doesn´t work. I try it now for weeks but it is dead (but I´m very sure the problem that it doesn´t starts is not due to the unlocked bootloader, because it is the same problem with the "not starting" like the time before I unlocked it). But the strange thing is... and now comes the important part... when I connect the phone with my PC the PC make the "USB connected"-sound and says that there is a unrecognized device connected. And when I try to start the bootloader the PC makes the "USB disconnected"-sound and a second later the "device-driver software not installed"-sound (I hope you know what I mean) and when I keep trying to start the bootloader it happens again and again the same. I tried almost everything, I use a loading.bat file but it can´t detect the phone (you know "unrecognized device"). Is it the accumulator ? Is the hardware dead ? Or what is the problem ?
I hope you understand this text (I´m sixteen and from germany). If you don´t please ask me every question you have. I really hope you can help me with my really long-term problem.
Thanks for every question, reply, solution or improvement proposal for me
XilentMe
So, what i have deduced is that
1. You are stuck on fastboot with low battery.
2. Your PC does not recognize your device.
For this purpose, first download and install the htc usb drivers. These should work: http://forum.xda-developers.com/showthread.php?t=2211791
Then visit this thread: http://forum.xda-developers.com/showthread.php?t=1658084
follow the instructions, once your phone is charged enough, unlock the bootloader, flash a custom recovery, boot into recovery and let it charge for a while, then flash a new rom.
Dont forget to press the Thanks button if i helped
Okay thanks for your proposal, but the problem is now that I can´t boot into bootloader, the phone does nothing. No reaction, no charging LED, no normal boot, no bootloader...absolutely nothing. Only when I connect the HTC to the PC the PC make the "USB-device connected" sound, as if you connect a USB-stick to your PC, but nothing else happens.
Any ideas or similar problems ?
XilentMe
So try to charge via pc. Leave for some time connected to pc and try to power up.
Hey,
I tried it, but it didn´t work. Nothing happens, only the "plug off-sound" when I want to start the bootloader via volume down+power button, while it is connected to the PC. I have no idea what to do.
XilentMe

Oneplus 5t black screen unbricktool doesnt seem to work

I've got a dead oneplus 5t from my son. It was not charging anymore.. So I've replaced charging cable and battery.. Seemed to work it was charging... However it doesn't boot... No logo screen screen stays black/blank.
Tried several suggestions on this forum to get into recovery mode, fastboot mode... But still nothing. Only vibrating works after a few seconds.
So tried to unbrick with OP5T_Unbrick_tool_dumpling_43_J.40_181105(OOS.5.1.7) and the qualcomdrivers..
I was able to install the drivers and I see they are installed in devicemanagement.. and an empty folder create for oneplus.
I charged the phone all night and was able to download the upgrade. It then says download complete and I tried to restart the phone..
Still just vibrating but nothing happens.. Seems like everything has vanished from the phone, no recovery, no bootloader, no files.
So how to proceed to get all the stuff on the phone? And maybe the displayscreen is dead, but how can I tell?
Also tried the SMT upgrade. Strange thing is the device and com port are seen in devicemanagement and active when I connect without volume up, but cannot start because it says When I try to use smt mode the program says: "This COM port is disable by user". With volume button up pressed and then connect, ledlight turns green but the qualcomdevice is grayed out in devicemanagement and it says waiting for device..
Any help is welcome. I am a noob in how to proceed on the phone however I have an IT background.
Spent already so many time figuring out .. maybe it's effortless and its for the trashbin.
Thanks in advance
SOLVED
I opened the phone again loosened all those tiny connections to battery, screen,charger, mainboard and re-attached them.. Somehow a connection seemed to be fitting allright as yI looked at it, but apparently wasn't :good:

Categories

Resources