Related
Maybe I am missing something here. I used to use the DUN with my 8525 and never had a problem with my laptop. I flashed today with XDA .20 and can not figure out how to work the new PAN. I tried everything and just can not get it to work. Am I missing something?
Use the internet sharing app. If you are tethering via USB make sure to disable bluetooth or your device won't get a DHCP lease from the PAN driver.
I have a problem connect Via bluetooth using Internet Sharing with all version of WM6. When pair with the PC, the PC can only transfer file with my 8525 only. But when using Cingular 3.3 aku my PC can find Serial port profile and connect to Internet Sharing.
Does anyone know a registry fix for this?, I am using a Sony laptop with build in toshiba bluetooth stack. When went back to 3.3 aku internet sharing Via bluetooth work again.
Thanks
tandao said:
I have a problem connect Via bluetooth using Internet Sharing with all version of WM6. When pair with the PC, the PC can only transfer file with my 8525 only. But when using Cingular 3.3 aku my PC can find Serial port profile and connect to Internet Sharing.
Does anyone know a registry fix for this?, I am using a Sony laptop with build in toshiba bluetooth stack. When went back to 3.3 aku internet sharing Via bluetooth work again.
Thanks
Click to expand...
Click to collapse
Now I dont feel so bad - this is exactly what is happening to me.
bluetooth PAN does NOT works with toshiba stack! upgrade your laptop to Vista and don't install toshiba stack! Vista (microsoft) stack works!
netnerd said:
bluetooth PAN does NOT works with toshiba stack! upgrade your laptop to Vista and don't install toshiba stack! Vista (microsoft) stack works!
Click to expand...
Click to collapse
I have vista and winxp with toshiba stack on the same laptop (dual boot), both doesn't work with all version of WM6 available here, but it work with 3.3 aku cingular rom.
Where can I find MS stack? when I unintalled toshiba stack, all the driver for the bluetooth is gone.
Edit: Thanks for the tips, I finally get it to work VIA bluetooth, the problem is the toshiba bluetooth stack. I uninstalled the toshiba stack, and do and manually driver installed and choose Toshiba as the manufacture, and intergrate bluetooth, Vista find a driver for it and activate the MS stack.
The issue with the Toshiba stack is this:
The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired. Toshiba can only Pair with devices seen during discovery....
Its a damn catch-22....
Sleuth255 said:
The issue with the Toshiba stack is this:
The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired. Toshiba can only Pair with devices seen during discovery....
Its a damn catch-22....
Click to expand...
Click to collapse
screw the toshiba stack! just dont install that junk, Vista will automally install Microsoft bluetooth stack!
Can someone please detail the steps on how to get Internet Sharing via bluetooth for either XP or vista?
TIA!
Interestingly, there's a help topic in WM6 that explains this! Tap Start->help and then choose "search"
Now search for "Internet sharing". How to set up the m$ bt stack on your desktop is explained there.
M$ stack
I just have the same prob. on my laptop with XP SP2 and toshiba BT stack...
how can i fix the drivers for M$ BT stack without install VISTA ???
THX in advance
vdavide
Since upgrading to WM6 Black, I can't seem to get the Wireless Modem (internet sharing) to work. I am using a USB cable but when I start the DUN on the PC, it says there is no modem installed.
found the answer elsewhere - if you are using USB turn off BT on the device!
obvious really (?)
replacing Toshiba BT stack with Microsoft
Hey, I cant vouch for this since i dont have a toshiba but thought i might pass this on. hope it helps.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=841048
Is there any way to use old wmodem from WM5 on WM6. I have public ip and im afraid that using Internet Sharing make that i will be behind nat? If i think correctly? /dont have wm6 on hermes/
warmkiwi99 said:
Since upgrading to WM6 Black, I can't seem to get the Wireless Modem (internet sharing) to work. I am using a USB cable but when I start the DUN on the PC, it says there is no modem installed.
Click to expand...
Click to collapse
Hey bud, Microsoft ditched DUN in WM6. If you have the drivers installed properly (included with Activesync 4.5) you should see a new LAN connection in your Network Connections. In Windows XP it should be described as "Windows Mobile-based Internet Sharing Device" If you don't have the driver installed you will see Generic RNDIS in your Device Manager. From what i understand if you have Vista installed on your computer these drivers come stock (on the Final full version of Vista, not included by default on RC1, not sure about RC2)
hope this helps...
PAN with toshiba stack
I downloaded an updated bluetooth stack from
http://aps.toshiba-tro.de/bluetooth/pages/download.php
and it worked fine.
Pair hermes with computer. First turn on internetsharing then connect using pan profile.
TheLuggs said:
I downloaded an updated bluetooth stack from
http://aps.toshiba-tro.de/bluetooth/pages/download.php
and it worked fine.
Pair hermes with computer. First turn on internetsharing then connect using pan profile.
Click to expand...
Click to collapse
... mmm interesting ... wich version of toshiba stack you used ? and wich version of WM6 on your device ?
I tried the very latest version of toshiba stack with LVSW first WM6 version but doesn't work .... only the M$ stack work ( fine too ).
Bye
vdavide
vdavide said:
... mmm interesting ... wich version of toshiba stack you used ? and wich version of WM6 on your device ?
I tried the very latest version of toshiba stack with LVSW first WM6 version but doesn't work .... only the M$ stack work ( fine too ).
Bye
vdavide
Click to expand...
Click to collapse
Bluetooth stack:
v5.10.06
bluetooth spec:
2.0,1.2,1.1
with jasjamming's WM6 Black 2.0
works like a charm, couldn't get it to work wit the older toshiba stack supplied by asus (3.03.04)
TheLuggs said:
Bluetooth stack:
v5.10.06
bluetooth spec:
2.0,1.2,1.1
with jasjamming's WM6 Black 2.0
works like a charm, couldn't get it to work wit the older toshiba stack supplied by asus (3.03.04)
Click to expand...
Click to collapse
i tried the v 5.10.06 too on my asus but still can't connect to my tytn WM6 LVSW first release .... maybe the different WM6 is the key of this problem...
wich options u use in the toshiba stack ( security level and so on ) ?
i tried high security level that force pairing with device ( and obviously pan enabled) but still get the message " only file tranfer service on the device ..."
i'm interested to get it to work too also if it's working now with m$ stack .
There may be some other users interested too...
THX
vdavide
I upgradded my Hermes to WM6 Pro Black 3.0.1 version. At the beggining everything seemed to work fine with bluetooth connections (for a couple of weeks). But yesterday when i tried to connect to any bluetooth device (hands free, gps antenna, pc adapter) my hermes couldn't find any. I hard reset my Hermes but the problem still remains. The blue led shows me that bluetooth is working, but no luck for me.
Is there anything i can do to fix this problem?
Thank you all
scorpio8h said:
I upgradded my Hermes to WM6 Pro Black 3.0.1 version. At the beggining everything seemed to work fine with bluetooth connections (for a couple of weeks). But yesterday when i tried to connect to any bluetooth device (hands free, gps antenna, pc adapter) my hermes couldn't find any. I hard reset my Hermes but the problem still remains. The blue led shows me that bluetooth is working, but no luck for me.
Is there anything i can do to fix this problem?
Thank you all
Click to expand...
Click to collapse
Waith for 3.5 upgrade, should fix it.
I hope so..thank you my friend
or try custels new 2.5, there are no bt probs for me.
ive tried black 3.01 too, but i had too many problems with it, after the flash everyhing worked, but after a few days, more and more stopped working.
and, black was very slow after a few days. no i go with custles work and i like it.
I had a similar problem.. I fixed it by installing the Widcomm stack, it doubled up the bluetooth icon under settings, It's not ideal but it got bt BT up and running.....hope it works for you.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Widcomm_stack
jb2001 said:
I had a similar problem.. I fixed it by installing the Widcomm stack, it doubled up the bluetooth icon under settings, It's not ideal but it got bt BT up and running.....hope it works for you.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Widcomm_stack
Click to expand...
Click to collapse
I installed it but the problem remains.
I also tried to download custels new 2.5 version, but it stops at 99% so i cannot tested.
Is there any other way to download custels new 2.5?
Same problem here. Carkit seems to connect, but no sound. BT GPS with Tomtom works OK.
Going back to 2.5, no BT problems there.
Where could i find the 2.5 Version?
I don't know. I downloaded it from this site some time ago.
scorpio8h said:
I upgradded my Hermes to WM6 Pro Black 3.0.1 version. At the beggining everything seemed to work fine with bluetooth connections (for a couple of weeks). But yesterday when i tried to connect to any bluetooth device (hands free, gps antenna, pc adapter) my hermes couldn't find any. I hard reset my Hermes but the problem still remains. The blue led shows me that bluetooth is working, but no luck for me.
Is there anything i can do to fix this problem?
Thank you all
Click to expand...
Click to collapse
Try a new ROM maybe? Tech support for yours isn't here no more hehe!
The point is that i tried custels new 2.5 version also and the problem remains!!! Is there any possibility that there's a hardware problem in my Hermes? If yes, can that be fixed somehow?
It's absolutely not hardware... I've been using my unit for ages now and this only surfaced when I flashed to Black 3.0.1.... Perhaps it's the build 1328 if i'm not mistaken..
LSVW's ROM utilises the latest available (build 1413).
The problem is still there..i used almost every rom that is available and my bluetooth is not responding!
Can anyone help?
I'm still having the problem... Anyone?
I use Black Dymond version now (rom date 1/4/2007, OS 17743.2.3.0) and radio version 1.40.30!
It seems that bluetooth is not responding even though it is turned on (the led is blinking also)
SE HCB-100 handsfree crashing my M3100
I have trouble too with my sony car kit (the one that clips onto sun visor) it connects and rings but sound comes through my handset and I then can't hang up a call as my handset crashes!! I'm also on Pro BLACK 3.0.1
scorpio8h said:
I'm still having the problem... Anyone?
I use Black Dymond version now (rom date 1/4/2007, OS 17743.2.3.0) and radio version 1.40.30!
It seems that bluetooth is not responding even though it is turned on (the led is blinking also)
Click to expand...
Click to collapse
@scorpio8h, can you try my version radio?! look in my sign... the version I have. I first try your version and I have also problems with BT, you find this radio on XDA.
dont forget... before flash the new radio (if you try) first use Olipro Hard SPL v7.0 (SPL-2.10)
i know there are tons of forms on this already but ive read through them all and cant figure it out i was woundering if some one could dumb it down for me. im having the problem where bluetooth pan will conect and say connected on my lap top and my hermes but then ie can not use the conncection.
usb connection works just fine.
the hermes is running windows mobile 6
laptop is vista
widcomm bluetooth stack from the cd that came with my kensington bluetooth dongle
ive heard the solution is a diffrent bluetooth stack but i tired installing blue soleil and it crashed the laptop in to a blue screen. i tried tobisha and it couldnt recqonice the dongle.
any help is much appreciated thank you
fb.knight said:
i know there are tons of forms on this already but ive read through them all and cant figure it out i was woundering if some one could dumb it down for me. im having the problem where bluetooth pan will conect and say connected on my lap top and my hermes but then ie can not use the conncection.
usb connection works just fine.
the hermes is running windows mobile 6
laptop is vista
widcomm bluetooth stack from the cd that came with my kensington bluetooth dongle
ive heard the solution is a diffrent bluetooth stack but i tired installing blue soleil and it crashed the laptop in to a blue screen. i tried tobisha and it couldnt recqonice the dongle.
any help is much appreciated thank you
Click to expand...
Click to collapse
try to use static ip adress
im not sure how to set that up could you walk me through it
I think the problem is that your dongle needs to be able to use the MS Vista stack. I had a similar problem and had to change my dongle in the end, luckily they were cheaper but I had to make sure if worked with the native Windows drivers.
Wam7 said:
I think the problem is that your dongle needs to be able to use the MS Vista stack. I had a similar problem and had to change my dongle in the end, luckily they were cheaper but I had to make sure if worked with the native Windows drivers.
Click to expand...
Click to collapse
ok im open to that what dongle did you use? and did it come with the right bluetooth stack what one do you use?
edit: k so i was just looking and your saying the bluetooth stack is built in to vista right? i was found it and it dose not seem to see my dongle
Hello,
for hours I have been trying to get ActiveSync to work with my Hermes (XDA Trion). Interestingly, everything worked fine with Schaps older ROM 3.54.
Actually, the problem can be split into two seperate problems:
1. When I try to pair my Hermes with my Notebook (MSI dongle with Bluesoleil 2.3) and I search for new devices, it discovers it. After I enter a passkey on the PPC a window pops open on the notebook. I punch in the same exact number as before but my PPC just stalls with the "hour clock" running. Sometimes I get a time out error after waiting about 5 minutes. If I don't enter a passkey I can pair the devices with no problem.
2. Once I have paired both devices (with no passkey) I can manage to refresh the offered services to ActiveSync. Nevertheless, I still get an error message that there is no existing Bluetooth partnership with a PC with ActiveSync support. Thus, I'm still not able to sync via bluetooth
If you have a solution, let me know!
Thanks!
sojakim
same HW no issues
I happen to have both the Hermes with Schap's 4.31 WWE Lite AND the MSI Bluesoleil BT 2.0 dongle as well, and bluetooth Activestink is no issue on my end. Works perfectly.
using 4.31 lite as well.. no issues with rgd to bluetooth connections with my HP tablet TC1100 (XP Pro Tablet Edition 2005)..
Upgrade went fine, used the v24 w/ opera version, but have a couple issues.
Biggest issue is that Bluetooth file transfer doesn't seem to work anymore with my iMac. I try to initiate a transfer and it says " there is already a transfer in progress", even after a soft reset, re-pairing, etc. It also says " your device appears to not support this feature", but it worked fine with WinMo 6.0, which came preloaded out of the box. I mostly upgraded for the performance and sliding panels, but the bluetooth issue is annoying.
The other problem is that Opera just won't install from the "my extras" menu. Also, my JOGGR randomly acts crazy, flipping between links on an IE webpage, only a soft reset fixes it
Any insight?
Install the latest Kavana ROM and stay away from the bloated "v24" version
I have WM6.1 V24 Ricky. My Bluetooth works just fine. In fact I'm posting wirelessly via a T-Mobile Dash Bluetooth PAN connection to a network server that feeds internet to all network devices, including the computer I'm typing on. So I don't think the problem is V24.
If you have a Broadcom BT adapter you may want to go to http://broadcom.com and download the latest BT drivers. I did this and it helped my server which was running 100% CPU with the old drivers. Updating the drivers also incidentally increased the BT PAN connection speed from 700K to 2000k (2Mps).