Qtek 9090 - MDA III, XDA III, PDA2k, 9090 General

plz my friends ......
my Qtek 9090 have folowing in a weater & a lot of things are changing like turn off the dovice and the screen also the calls ......
so what I have to do blz help me .
yours.

perform a hardreset on it, and test.

SandStorm said:
perform a hardreset on it, and test.
Click to expand...
Click to collapse
thinks a lot ...but blz how to do a hardreset....if the same thing as format it ...i did it i format my dovice but the problem still .....so plz help me to turn my pocket pc like before

Related

Dead Q9090

Hi
My Qtek 9090 is stuck with a USB or SERIAL SCREEN... what can I do?
PLEASE HELP !
Hmmm
Commit Hara kiri?
almost
No really
HELPPPPPPPPPPPP
I got this device in Fr and wanted to witch to UK, since I cannot stand FR PPC
I tired several things founded here but I don't know where to really start neither what to take or not
What were you doing that got in this state? Pushing buttons, trying to update the ROM,...?
If you didn't do anything then try a hard reset (power and softreset button). If the doesn't work and you didn't do anything else then send it back to the place you ordered it from.
If you were trying to update a ROM it may be that you were connected to a USB hub and the update failed.
Well to be honest with you, I received for gift a Qtek 9090 it was given to me with a BT GPS, all was in French, and even if I am French I cannot stand French OS, translation are always horribly done.
So I DL a T-Mobile ROM, BUT I made the mistake to use en XDAII ROM, the Upgrade went well, I reboot the XDA III and I was in the USB/Serial Mode.
I know very well to hqndle such things on iPAQ, I often Swap Japanese to English ROM, but on the 9090 I really don t know how to do. I looked qround on the forum I tried severql stuff, but with no result. Lately I got the COUNTRY CODE error when I tired to restore the rom (I looked at the GERMAN to ENGLISH) thread.
So really I would love to fix this soon.
Once again HELP !
What happens when you do a hard reset (power button held while doing pushing 'reset' with the sylus (pen)?
I'm thinking that the only way your going to recover is by loading the image off of an SD card from the Bootloader window, I'm not sure how to this though.
Well it is indeed the only thing which cqn help me here, but tomorrow I am flying back to Tokyo and I will NEVER find a QTEK in Japan.
I could dump the empty or fake rom from my dead 9090 to an SD using tty, thanks to the cmd d2s and could just try to recover it with the SD, the process work fine but well uploading a fake or empty rom won t help.
I could also find on this forum FTP some ROM, but no way to upload them to my Qtek or even no solution to chqnge the Counrty ID stuff.
There is another way to solve this stuff is to use TTY with a lnb nk.nb0 like cmd from a modified ROM but once again no info on how to change the languqge ROM info.
The XDA ROM Tool stuff is nice well done but rely too much on ActiveSync. Before trying to chqnge my ROM I saved it using this soft but once your 9090 stuck to the SERIAL/USB Screen it become useless since it is using ActiveSync.
No one here got an idea ? How to solve this matter ???
:? so no hope ?
So I continue my little investigation... and feel so lonely anyway whatever I write for the language I got this
questions
why the D2S cmd work but not the S2D?
why lnb neither h nor ? is not allowed ?

Big Problem With My Xda

HELLO PEOLPLE:
I have just done a very big error with my pda. I wanted just only to reinstallthe same rom to format it and in the beguining of the process my pda stpos and also my computer.
Now my pda is whitout operative sistem and i can't conect it whit activesinc bacause the computer don't recognocise my pda.
WHAT CAN I DO NOW???
PLEASE, COULD SOMEONE HELP ME????
THANKS A LOT.
Screen shows Serial v1.02
Hello
I'm new here, and maybe I have a similar problem as Robertoko69 with my xda mini, I can't do anything, and it doesn't recognize the memory card, could somebody please, please, help? I whas triying to make work the bluetooth... and I have just buyed it today!!
Thanks a lot!

My QTEK 9000 IS DEAD, PLSSSSS HELP ME

Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Your Uni still alive
Try to download "Exit Bootloader.exe" from wiki, conect the uni to USB and Run the applcation...
If you uni is death when the Bootloader is lost. I brick my Jasjar when the Bootloader was gone, dont worry Try to read more in the forum Universal WM6.
AIN1 said:
Try to download "Exit Bootloader.exe" from wiki, conect the uni to USB and Run the applcation...
If you uni is death when the Bootloader is lost. I brick my Jasjar when the Bootloader was gone, dont worry Try to read more in the forum Universal WM6.
Click to expand...
Click to collapse
Hi AIN,
Thnks Mucho Mucho!
My Problem is, that i can only choose Com 1 to Com 3 in mtty 1.42 - Because of this i can't use the methode which is explained. - What i am making wrong? - I use a Sony Vaio Laptop for booting...
Thanks a lot!
if you have the rom try tis out!
1.unzip the file!
2.put the rom-extended rom-radio(or whatever you need!) in this folder
3.when you'll connect the phone on the usb,on the screen you have to see "usb v1.01".
4.run the "MaUpgradeUt_noID.exe"
5.wait till it will finish flashing!!
6.enjoy the new rom!!
qtek pu10 0r 9000 is freeze please big help
please big help / i just try to change language on my qtek 9000 and when the phone finish. and the screen freeze. and i off it and on it .and still the display show but freezing. and it can't connect to the active sync and pc /please help
Try a soft-reset first.
If not, you may have to hard-reset. You will lose all your data and programs you've installed and it will revert to factory state (or last flashed ROM).

help help

Hi , this is my first post , I upgraded to ARTEMIS touch 4.01 full with 4 sided cube.
It worked fine , when i started SPRITE backup file to restore my files from SDHC card , the phone restarted and is now hung .... it starts showing HTC SMART MOBILITY , the HTC TOUCH circles move and then it freezes .....
not sure what to do , I have taken the battery out and tried to start it again but it freezes again .
help help .....
hard reset
Hi , can any one guide me please how to hard reset the T mobile MDA compact 3 ?
Info is at the wiki - http://wiki.xda-developers.com/index.php?pagename=Artemis_FAQs
sorted sorted +++
did hard reset --- three colour screen appeared , connected usb to laptop , installed new rom . cheeeeeeeerrrrrrrrrssssssssssssssssss

help me fast please my artemis uspl failed

My artemis is in the white screen.after use the Artemis_USPL (in ROMUpdateUtility level).
please help me fast.please.
...
sounds like it went wrong.lol
you probably bricked device..
take sd card out, if device goes to bootloader - red,blue,green..
there is a chance to bring it back to life.
to do this you need the official rom that was on the phone, so first things first, download that!
secondly, download ''uspl cmon'' this will let you flash more roms to your device, - with old uspl it sometimes stops at 3% because of size.. but with cmon, it doesnt!
so flash with official rom, uspl cmon, then flash a new 6.1 or 6.5 rom!
good luck..
if you need more help, message me..
...
...try this beforeyou panic..
try uspl again, once dos screen has finished, (penguin) soft reset and update uspl. device should restart and spl should be
1.11.0000 - uspl
1.11.cmon - uspl cmon!
help please,
need the original t-mobile Mda Compact Rom!!!
can`t flash other roms.
when i want to flash it shows me the error 300
i just need the original rom.
i can`t do nothing with my device!
please help me
raving_nanza said:
sounds like it went wrong.lol
you probably bricked device..
take sd card out, if device goes to bootloader - red,blue,green..
there is a chance to bring it back to life.
to do this you need the official rom that was on the phone, so first things first, download that!
secondly, download ''uspl cmon'' this will let you flash more roms to your device, - with old uspl it sometimes stops at 3% because of size.. but with cmon, it doesnt!
so flash with official rom, uspl cmon, then flash a new 6.1 or 6.5 rom!
good luck..
if you need more help, message me..
Click to expand...
Click to collapse
hi my friend .
im tryed but cant do it. when i run start_uspl it go to boot loader and occur error 260 and ... !
what is the problem ?
what i can do ?
please help me !
thank's a lot .
error 260 Here after I get to bootloader
No any one ? !
help me please !
...
error 260 is the connection to activesync dude..
you just gotta keep trying..
(remember do not soft reset)
Take SD card out and try again.
...
solved??..
raving_nanza said:
solved??..
Click to expand...
Click to collapse
no !
after start and finish artemis-uspl my artemis stay in white screen & the ROMUpdateUtility failed ! (error 260 !)
my pc windows is 7 !
excuse me for bad english write ! bacause my language is other !
tnx
...
wait for artemis to get active sync connection before continuing with the RUU..
(make sure to take memory card out)
raving_nanza said:
wait for artemis to get active sync connection before continuing with the RUU..
(make sure to take memory card out)
Click to expand...
Click to collapse
im sure my artemis connected to WMDC in win 7 !
and the SD Card is out !
after start artemis-uspl and finish my artemis(p-3350) stay in white screen ! and when the ROMUpdateUtility started(auto) in verifying information level occur 260 error !
...
after the white screen device restarts, thats when you click through the RUU
...
(let active sync gain connection before clicking through RUU)
raving_nanza said:
(let active sync gain connection before clicking through RUU)
Click to expand...
Click to collapse
in start_uspl.exe in 70% level my artemis stand in white screen & ..... 100% !
im sure when my artemis in white screen its conncted to pc !
can i run ROMUpdateUtility after white screen in bootloader or when the window are booted ? ( Manual)
Hello! I've got a big problem with my htc p 3300. It Doesn't start. What can I do? please help me
ovidiumihai said:
Hello! I've got a big problem with my htc p 3300. It Doesn't start. What can I do? please help me
Click to expand...
Click to collapse
download your original rom
what are the red numbers and letters when the device starts up?
so let me get this straight
I hard reset my default ROM
I install
- Cert_SPCS
- EnableRapi
activesync ON
start uspl (Dos)
wait for it
(Penguin)
Creating Preloader 1:1 Mapping
WHITE SCREEN & no active sync connection
How long do I wait here, before I am able to do anything? I can safely reboot however ^_^ and it goes back to WM5, like nothing happened
my device is an old Dopod P800W, never flashed before and running old ROM from 2006
Worked a treat, saved my bacon.
Many thanks

Categories

Resources