Develop Bugs

Htc P3300 Bootloader Problem !!!

Hello Everyone. I Am Trying To Istall The Official Wm06 But The Bootloader Does Not Respond. Any Sagestions Pls

U give us very little info to respond to
what pc system r u using? What version activesync, what exactly happens (or doesnt), which rom/language, did u cid unlock it (used uspl), etc.
Be more specific please.

Twiggerdingo said:
U give us very little info to respond to
what pc system r u using? What version activesync, what exactly happens (or doesnt), which rom/language, did u cid unlock it (used uspl), etc.
Be more specific please.
Click to expand...
Click to collapse
hello again.thanks for the responce. my p3300 has the official wm5. i load the
wm06 (not official) one of the programs that i use in my job dosn't work propertly. so i have to restore in previus wm5. i download fro the site of htc the official wm6. in htc they told me that it is very easy so i could do it my self. i had only to conect the usb cable to the pc (windows xp) and run the file (wm6) i did it but when it start to install the wm6 the activesyng (ver 4.5.0) shut off and stoped the instalation. the screen turn to black. after that the p3300 started again but when i push the voice key and the power key to get in to the bootloader it doesnt work the screen becams to a multi color pixel.the htc told me that i have to replace all the inside hardware. thats all thanks a lot .

robinbatman said:
hello again.thanks for the responce. my p3300 has the official wm5. i load the
wm06 (not official) one of the programs that i use in my job dosn't work propertly. so i have to restore in previus wm5. i download fro the site of htc the official wm6. in htc they told me that it is very easy so i could do it my self. i had only to conect the usb cable to the pc (windows xp) and run the file (wm6) i did it but when it start to install the wm6 the activesyng (ver 4.5.0) shut off and stoped the instalation. the screen turn to black. after that the p3300 started again but when i push the voice key and the power key to get in to the bootloader it doesnt work the screen becams to a multi color pixel.the htc told me that i have to replace all the inside hardware. thats all thanks a lot .
Click to expand...
Click to collapse
Ok, let me see if i understand u correctly, your specs give me no new questions they look ok. U have WM5 and want to run a program (from your work) which needs WM6 (wont run on WM5). HTC told you about the official WM6 update. This wont flash as activesync crashes, right?
With an official Rom you will not need to unlock the CID/SPL with USPL. But this goes only when you stick to your current language. i.e. a german WM5 is not allowed to be flashed into english. To do this you will need to USPL-unlock it 1st.
If the language is the same, it should work. Best is to do a hard reset 1st (2 soft buttons and soft reset, wait and press green/send.) Afterwards hook it on the PC (activesync want to start a newe partnership, click cancel, so u will be connected as guest).
Start the rom upgrade. Activesync should close and bootloader on the ppc will be started. This is a screen with many colours/stripes, which is normal but looks very bad and different from normal bootup.
Then the flashing will start, the screen on the ppc will turn white/grey and a scale will show you the percentage of the flashingprocess (similar to the screen of the pc). Wait patentiently and do not toch the ppc or disconnect (or expect a bricked device).
At the end, the ppc will reboot and take a while (longer then normal bootup) to initiate the boot for the 1st time.
If this wont work, then try to extract the upload file, put the ppc in boatloader mode, connect to pc and start the romupdateutility.exe directly.
Good Luck!

hi,
i've flashed my HTC P3300 and it was done successfully (using USPL) but the language was Spanish, i searched a lot how to change it to english since i dont understand a word of it.
through one of the forums, i was told to set the SysLang = 1032 in registry to get the english language, i done so, now, the phone is stuck in Welcome (WM6.1) screen and nothing is happening, not even responding to power key.
I tried hard reset, it doesn't work, i tried entering to bootloader, it also doesn't work, also, i am not able to connect it to PC since i guess its not completed up.
Just got stuck with a brick, can you help please. Really needed!!!!!!
Thanks

Maybe flashing ROM from memory card may help. Search Artemis wiki for micro card ROM flashing.

Hello, I guess I'm having the same problem...tried to flash but something went wong and now I have my htc p3300 blocked with the multicolor screen. It does not work, so I don't understand how I could start flashing rom by memory card. Could you be a little bit more detailed? Thanks in advance

Unlocked P3300 WM6 can't upgrade to WM6.1

Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,

theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
Cheers,
Click to expand...
Click to collapse
Hi m8
i hate the same probleme 1 week looking for a solution
Artemis Touch 4.02 Full with 4 sided cube <--- i have this rom right know.... there are 2 files on it on file
STEP 1 - activesync then uspl cid unlocking
whene its finisch
STEP 2 - activesync then flash artemis touch rom
it works for me
let me know if it work for you
one thing when you have done step 1 you doesn't have take this rom you can take every rom you like

Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,

hmmm
http://www.4shared.com/file/45478590...ified=c2945a00
this is the 1 i use you may remove you mem card

alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz

thormdac said:
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
Click to expand...
Click to collapse
I checked that one out, but it's saying at the bottom that SDHC cards are not supported and this is what I have actually, I even tried the whole process after removing the SDHC card from my phone, but I still got the same error (270) corrupt image file

...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz

thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
I have another computer and it's Vista, I hope it'll work with it, I'll let you know
Thanks

thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
SAME PROBLEM, I tried it on the other computer and it gave me exactly the same error

theorthodontist said:
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
Click to expand...
Click to collapse
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.

yvrRome said:
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
Click to expand...
Click to collapse
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??

theorthodontist said:
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
Click to expand...
Click to collapse
Yes, you should remove your SDHC card when updating. Start again with USPL but make sure your card has been removed. When RUU kicks in after DOS window shows 100%, my screen is blank too with Activesync disconnected, just continue with RUU to flash the new USPL.
After it reboots, run the RUU for the new WM6.1 ROM.
There's pdf instructions in the USPL thread if you're still having problems.

theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
Click to expand...
Click to collapse
CID Unlock is the first to do....
And NO SDHC card in during flashing....

TPA said:
CID Unlock is the first to do....
And NO SDHC card in during flashing....
Click to expand...
Click to collapse
Thanks guys, I managed to flash ROMs on my Artemis, thank you for your help,
Salut

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english

Please Help me with wm6.5 rom !!!

How can i install the ".nbh" file !?
I've extracted the rom and he has only one file, named : diamimg.nbh !
please help me and forgot my english !
thanks !

[B]I appreciate if you help me ![/B]
I appreciate if you help me !

Copy diamimg.nbh to the root of your sd card/internal storage and put your diamond into bootloader by pressing vol down, back button end reset at the same time and hold them until bootloader screen appears and simply follow the instructions on the screen. Make sure your battery isn't low. Good Luck!

http://forum.xda-developers.com/showthread.php?t=415194
there's a sticky at the top...
Sticky: [MOD]Diamond Benchmarks, Tutorials & How-Tos Thread
mrvanx
guide should be there...
make sure you download the RIGHT rom...
if u're gsm get a gsm rom... if u're cdma get a cdma rom
if u follow the method above, charge ur batt / and or have it plugged in at the same time as i do
shouldnt have any problems if you follow the guides

Thanks boys !
Thanks boys !

It doesen't work !
Appears "Loading ..." message and I think is blocked because I was waiting 15 minutes and nothing !

Mmmm...
goguci said:
Appears "Loading ..." message and I think is blocked because I was waiting 15 minutes and nothing !
Click to expand...
Click to collapse
Have you flashed Hard SPL first?

grahamkdt said:
Have you flashed Hard SPL first?
Click to expand...
Click to collapse
how can i flash Hard SPL ?
thnx !

goguci said:
how can i flash Hard SPL ?
thnx !
Click to expand...
Click to collapse
Use the Hard SPL link from my signature.
Connect device with pc via active sync.
Begin process using RUU_exe.
Then soft reset device and volia!

band27 said:
Use the Hard SPL link from my signature.
Connect device with pc via active sync.
Begin process using RUU_exe.
Then soft reset device and volia!
Click to expand...
Click to collapse
It-s only one file in you HARDSPL from your signature !
where i have to put it ?!
pls help me ...
i wanna install wm6.5 on my Diamond...that-s all !
wrote: "updating the ROM image on your PDA phone ... 0% " but my phone don-t reset ... he do nothing !
and then appears :
"ERROR[202]:CONNECTION "
but my htc is connect via ActiveSync

Help me ! please !

take a look at here http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
be sure what do you do, an error could brick your phone !

Tnx!
tom62 said:
take a look at here http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26
be sure what do you do, an error could brick your phone !
Click to expand...
Click to collapse
i've installed Hard-SPL 1.30 succesfully !
and now ... how can i install wm 6.5 on my htc ?
i've copy diamimg.nbh on my internal storage, and then i soft reset with wolume down and back key ... an nothing... appears : "Loading ... " and nothing !

goguci said:
i've installed Hard-SPL 1.30 succesfully !
and now ... how can i install wm 6.5 on my htc ?
i've copy diamimg.nbh on my internal storage, and then i soft reset with wolume down and back key ... an nothing... appears : "Loading ... " and nothing !
Click to expand...
Click to collapse
Don't simply reset it with your stylus! You have to press back button, vol down and reset with your stylu s at the same time and hold until a new screen comes up saying it has found a new rom to flash and then just simply follopw the instructions on the screen. It's easy Good luck

mosec said:
Don't simply reset it with your stylus! You have to press back button, vol down and reset with your stylu s at the same time and hold until a new screen comes up saying it has found a new rom to flash and then just simply follopw the instructions on the screen. It's easy Good luck
Click to expand...
Click to collapse
Appears: "Loading..." and nothing !
he don't find my DIAMIMG.NBH ?
i put ...nbh in my internal storage !
DO I HAVE TO PUT NBH FILE INTO A FOLDER !?
TXANX !

Help me help me help me help me!!!!!
search the forum search the forum search the forum!!!!!!
everything is explained here.
I hate posts like this... clutter!!!

Bricked JasJam , help :(:(

Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....

try doing a hard reset not just a soft reset that might help

medo_punsher said:
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
Click to expand...
Click to collapse
if u have loaded hardspl then hold power button + OK button on sides of phone and then stick stylus into reset button an dthis should get u 2 red, green, white, blue colour screen and then plug usb in and re-flash

get hermes in bootloader mode, connect USB cable and flash with this http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html

Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??

Activesync doesn't need to be runing.
download mtty and do like he said here "http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen" (copy all text between " " and paste to your browser).
After "set 14" give "task 8"

Try flashing from SD card, first the HardSpl ant then the Original Stripped ROM.

@TheMim : tried but didnt work
@eryunt : how ?? i have a custom rom with the name HERMIMG.nbh on my sd card but it doesnt upgrade it says loading for a few seconds then some red numbers and letters appear at the top of the screen then it goes into the bootloader and doesnt upgrade
NOTE THAT : i dont have hard spl (no supercid)
Thnx again , plz help

Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
Hope it fixes your Tytn

Many thanks for your help , i will try that tomorrow but one final question ,
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??

medo_punsher said:
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
Click to expand...
Click to collapse
Yes, you need an SD-Reader for your PC

Okay , now i have a cooked rom on my sd card (fat32 formatted) named HERMIMG.nbh when i get into bootloader it says loading for a few second then a red number "00068002" appears at the top of the screen and it continues to the tri-colour bootloader
any help ??

Have You already installed HARDSpl correctly via SD-card?

No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??

medo_punsher said:
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
Click to expand...
Click to collapse
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
JUST FOLLOW ALL THE STEPS ABOVE

No no no no..... HSPL cant be upgraded now via SD card cause th SSPL was unsuccesfull!!!!!.....
Get a XP PC... your batt must be 50% charged or more "better", a working USB cable
NO SD CARD inserted... your XP pc must have NET frameworks 3.5
put your device in bootloader mode.... and upgrade any stock rom to rewrite a valid SPL cause your is corrupted now
then when you get a stock rom working via SSPL you will be able to redo the steps to flash HSPL V7