Develop Bugs

Failed to Upgrade ! XDA 2 doesn't boot anymore :(

hi all ! im very new in this domain ! first here is what i DID : i have this XDA with ver 1.6x (something like that) and i wanted to upgrade to the new version from www.microsoft.com/etc etc...! so i dld it and started to write the new version.The program deleted my old version of windows and started to write the new ver after doing all the checks.But my laptop suddenly got into stand by when the program was writing the new soft at 7%.He said i should unplug then reset and re plug the poket pc! i reset it with my stilus and try to reconnect but now my setup program for upgrading doesn't FIND my XDA II at all....he tells me to connect the poket pc to cable.When the device want's to start i get the screen with O2 and the version down in the right corner but it wont get passt that...that is why probably the soft from my laptop says that i should connect the pda...my pda doesn't BOOT ! right ?...so...now my big question...is there a program that i can use to WRITE windows mobile to my XDA II ?..so that he don't checks the version...he just overwites all data so my xda will work again! hopefully somebody can help me...or maybe is there a program that can delete all from my xda so i can start to write the new version to it ! pls ..smb help me with that ...i need to fix this very quick..if not im a dead person..PS :i forgot to mention,,,..my PDA doesn't belong to me ..so this is why im dead..if i don't get soon a new ver of win to it !...i'll wait for your answer...! so the final question would be...where to find a TOOL that can WRITE my ROM without DETECTING (without active sync-cause this prg doesn't recognize anymore my XDA2) my PDA !...IF someone can help pls write me quick..you can also write me on yahoo: [email protected] ! thx alot guys

you get the upgrade files from www.my-xda.com not from microsoft....
re-do the upgrade dude.... goodluck... check out DCS's thread about upgrading

i upgraded (and switched languages in the process) my girlfriend's iMate 2k2 ( a.k.a. XDA2/MDA2) by flashing with an upgrade from my cellular provider.
the first time, things went wrong and I saw USB and some weird junk on the screen.
panicking, i decide to try it again.
this time it erased everything, and crashed when it came to 15 percent of the writing part.
REALLY spooked, i tried it a third time, and sat in front of the laptop to prevent a screensaver or hard-drive-spindle-down from happening, and the upgrade went smoothly.
it was a boring 45 minutes, occasionally jiggling the mouse to keep the computer alive, but it worked.
so try and try again

Thx All For Help
i've read a post by DCS a after that all went smooths for my noob knowledge ...the 3 button reset hlp me alot cu guys ..and HF!

please can anyone help! mda 3 failed rom update

could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated

Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!

many thanks forza , as u can prob guess im new at this !

sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer

This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.

thanks forza ! your a star worked a treat

qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )

toshiba tg01 lived up to its reputation

so... i read loads of stuff how toshiba tg01 fails at everything , thought it wont happen to me but... so i was upgrading to windows mobile 6.5 , everything went fine it installed , got a message that installation was succesful the phone restarted , standart toshiba startup logo comes up , then it turns off and the same logo comes up again! and again! and again..... so i wonder if this is it will i have to go for warranty or is there anything i can do by myself thx for the help!

what doyou want to say ....and what apps you have installed

at first i had spb mobile shell 3.5 , fingerkeyboard , gs player , but i did a master clear just before instalation , formated the memory card.

since the phone does not go past the toshiba logo i guess it is a windows problem , so is there any way to put new windows into it or reset the phone someway , because the built-in reset button doesn't do anything.

maybe a recommendation of what software might be used to detect the phone , since it turns on , it would make sense that it puts out somekind of signal. any help? really need it fixed ;/////

problem wiht rom

i ave a small problem so small like a little, I wanted to reinstall the rom for HTC Diamond phone and I received only the first step where HSPL I installed and I reset the phone if I do I install properly SSI are not sure and now I turned on Windows Mobile and ciples welcome and there in the translation that should I touch the screen then give me the align screen and there is too cross with which it moves and move them to the sides do not address bo a hundred times and still nothing pls help surne
edit: I managed to turn on Windows Mobile 6.1 without using the touch flo soft reset in a special regime nenacitalo sim but now what?? pls pommooc
Edit 2: I just tried znovaa it connected to your computer that you reinstall rom the instructions and when I started I wrote that my phone is not connected to the USB while the
edit 3: I've tried burn rom mobile and via the special regime but do not even
pls help people seriously
sorry my english

diamond problem rom

mam maly problem so small like a little, I wanted to reinstall the rom for HTC Diamond phone and I received only the first step where HSPL I installed and I reset the phone if I do I install properly SSI are not sure and now I turned on Windows Mobile and ciples welcome and there in the translation that should I touch the screen then give me the align screen and there is too cross with which it moves and move them to the sides do not address bo a hundred times and still nothing pls help surne
edit: I managed to turn on Windows Mobile 6.1 without using the touch flo soft reset in a special regime nenacitalo sim but now what?? pls pommooc
Edit 2: I just tried znovaa it connected to your computer that you reinstall rom the instructions and when I started I wrote that my phone is not connected to the USB while the
edit 3: I've tried burn rom mobile and via the special regime but do not even
pls help people seriously

I didn't understood your problem, but try these steps for installing ROm first time : http://forum.xda-developers.com/showthread.php?t=416211
OR http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26