hi again!
i managed to connect my MDA3 to to active sync via bluetooth and tried to update it... dont know what happend, but all it says is SERIA v2.05 on the MDA3s screen.... please tell me that i have not killed my mda!
whats going on??!??
pleasehelp me!!!
thx!
KRZTF said:
hi again!
i managed to connect my MDA3 to to active sync via bluetooth and tried to update it... dont know what happend, but all it says is SERIA v2.05 on the MDA3s screen.... please tell me that i have not killed my mda!
whats going on??!??
pleasehelp me!!!
thx!
Click to expand...
Click to collapse
hehe bad idea you need to use a cable/cradle to upgrade, try soft resetting, if it goes back to SERIAL v2.05 then you can fix that but you need a cable/cradle also. PM me if you need a hand.
btw: i was trying to run following ROM update from the tmobile austria site:
BA_TMAT_10601_159_10000_SHIP0307.exe
Midget_1990 kindly advised me to do as written here using a cable this time instead of just trying with bluetooth... (yeah, i know...stupid!)
anyone with similar problems who could fix it using that tutorial?
just want to really make sure, that there is a way to repair even after failing to pdate the ROM....
still shocked,
krztf the noob
Related
i tried upgrading the rom but i installed the same rom on my BA now it only shows USB v2.06 when its docked on the cradle...im getting error 120 when io try to update again
please help me i need ur advice
tnx in advance
Been There - Done That!
hey!
i had similar problems once...
check out my THREAD
make sure u check the "here" link in my last posting, you will find instructions for formating your pda there, after that u can tryto update again!
btw: there are plenty of threads in this and other forums on that topic...
hope that helps!
krztf
tnx
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
bolero001 said:
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
Click to expand...
Click to collapse
don't know if this applies to the BA, but i had that problem when messing around with splash screens on my hermes
All i did was reflash the offical manufacture radio rom only which resolved it
Hi there,
I'm using a D810 with chinese rom, just wondering how can I flash it to English rom.
Thanks a lot.
Yes u can.
This is how to do it: www.trinityguides.info
And this is one you can try it out,there are many more around here.
http://www.mediafire.com/download.php?0yjklyewb2f
Thanks for the reply.
But I still encounter problem....
I always get error [260] when I use the romupdate utility saying something wrong with the connection, I've try to use several USB cable already, still fail.
But the same cable can do the activesync without problem.
Any idea ?
Thanks.
syndicate said:
Thanks for the reply.
But I still encounter problem....
I always get error [260] when I use the romupdate utility saying something wrong with the connection, I've try to use several USB cable already, still fail.
But the same cable can do the activesync without problem.
Any idea ?
Thanks.
Click to expand...
Click to collapse
You should follow this method:
www.trinityguides.info
Hello,
Excuse me for posting here, if it is not appropriate, but i can not find a solytion elsewhere... yesterday i installed a greek rom by grigoris and my diamond would not synch with pc any more. How can i solve this problem please? I can not rll back to another rom, or do anything. Is there a solution? I appreciate your help
Dimitris
Try putting it into bootloader .....then see if it connects
Tell us what you have already tried.
band27 said:
Try putting it into bootloader .....then see if it connects
Tell us what you have already tried.[/QUOT
Thank you for your reply!!!
The story goes like this:
I had this wonderful rom, duttys, and when i saw that there is a greek one, although i heard a voice inside me trying to stop me from doing it, i installed it.
Then, all of a sudden i realised that I could not connect back to pc. The rom is not what i had expected I am afraid and i wanted to roll back. But, i can not make the connection. I blamed my pc at first, but the same happens wherever i try it. SO it has to be the rom.
I do not consider myself and expert at this, So this seems to be another problem for me. One has to learn from his mistakes i guess.
Now, I do not know how to do this "bootloader" you are suggesting.
These are my steps, apart from reading through the forum...
Click to expand...
Click to collapse
Hi experts,
I have a touch pro2, it was not displaying Chinese fonts so I installed fontpatch.cab. Now the phone hangs as soon as I start it. Soft reset is not working . I am not able to do anything on it. Please help me.
Regards,
Sumanth
try if you can still connect the phone to your computer using ActiveSync and remove the program you just installed using ActiveSync. if that didn't work, i guess hard-resetting the device is the way to fix it.
Sumanth M V said:
Hi experts,
I have a touch pro2, it was not displaying Chinese fonts so I installed fontpatch.cab. Now the phone hangs as soon as I start it. Soft reset is not working . I am not able to do anything on it. Please help me.
Regards,
Sumanth
Click to expand...
Click to collapse
The only references I could find to that cab were all for the version that was written for WM 5.0, so I'm guessing that it's incompatible w/6.1 and up.
And yes, if you can't get past the bootup screen to be able to remove the program, you might have no other option than a hard-reset at this point.
Thank u
Thanks guys for your reply. I did hard reset and installed the cab file on this thread: 450574
Now phone is fine and I am able to see these fonts also
Hi, I need help, I am really frustated about this. Ok, my problem is the next: today I hard reset my phone (lenovo vibe k5) and now, when I star it, it makes me connect to the internet trough a wi fi connection. I connect my phone and then it throws me a message that the phone is searching for an update and nothing happens next, it keeps searching for an update. I leave it for like 5 or 6 hours and nothing, it keeps searching and I can´t skip the update. I only root my phone, I never try to install another ROM or something. I tried with QFILE, with the recovery option into Lenovo Moto Smart app and nothing, it don´t even appears on the usb devices list. This got me mad dudes, I realy need help and if there´s a post about this I´ll aprecciate the information. Sorry if I wrote something wrong, I´m spanish and this thing is making me go crazy! Pd: I´m new I don´t understand If this is a post or if it´s here where I have to make the questions
NasNastyJ said:
Hi, I need help, I am really frustated about this. Ok, my problem is the next: today I hard reset my phone (lenovo vibe k5) and now, when I star it, it makes me connect to the internet trough a wi fi connection. I connect my phone and then it throws me a message that the phone is searching for an update and nothing happens next, it keeps searching for an update. I leave it for like 5 or 6 hours and nothing, it keeps searching and I can´t skip the update. I only root my phone, I never try to install another ROM or something. I tried with QFILE, with the recovery option into Lenovo Moto Smart app and nothing, it don´t even appears on the usb devices list. This got me mad dudes, I realy need help and if there´s a post about this I´ll aprecciate the information. Sorry if I wrote something wrong, I´m spanish and this thing is making me go crazy! Pd: I´m new I don´t understand If this is a post or if it´s here where I have to make the questions
Click to expand...
Click to collapse
Here is the guide for using qfil most probably the issue is with the drivers make sure you are using correct drivers
https://forum.xda-developers.com/k5-plus/how-to/unbrick-vibe-k5-plus-qfil-qpst-method-t3467830
And I don't really know what up with the update issue maybe you should try resetting it again