is my xda dead? - MDA III, XDA III, PDA2k, 9090 General

i tried upgrading the rom but i installed the same rom on my BA now it only shows USB v2.06 when its docked on the cradle...im getting error 120 when io try to update again
please help me i need ur advice
tnx in advance

Been There - Done That!
hey!
i had similar problems once...
check out my THREAD
make sure u check the "here" link in my last posting, you will find instructions for formating your pda there, after that u can tryto update again!
btw: there are plenty of threads in this and other forums on that topic...
hope that helps!
krztf

tnx
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx

bolero001 said:
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
Click to expand...
Click to collapse
don't know if this applies to the BA, but i had that problem when messing around with splash screens on my hermes
All i did was reflash the offical manufacture radio rom only which resolved it

Related

problems with a new mda

hi first this is kind of a duplicated post with this one http://forum.xda-developers.com/viewtopic.php?p=240152#240152
but i think its a better forum for it so sorry about that.
i'm haveing loads of problems with my new mda and need some advice regarding updateing the software on it
any help is real real apreciated
ok so i've been reading i got the phone in to boot loader so its displaying usb v1.00 i tryed running the rom and i got the country id error
i downloaded the no id wizard but now when i run that i'm getting
"error 264: connection"
and its telling me to check tothat the phone is connected which it is because when i plug it in xp tels me that a new device has been connected
any ideas ?
cusaeng said:
ok so i've been reading i got the phone in to boot loader so its displaying usb v1.00 i tryed running the rom and i got the country id error
i downloaded the no id wizard but now when i run that i'm getting
"error 264: connection"
and its telling me to check tothat the phone is connected which it is because when i plug it in xp tels me that a new device has been connected
any ideas ?
Click to expand...
Click to collapse
try here http://forum.xda-developers.com/viewtopic.php?t=42992
sucsesssss !
chears buddy that worked a charm the one thing i wasnt doing was changeing the usb settings in active sync.
thanks a million
your post should be a sticky at the top of the forum
cusaeng said:
sucsesssss !
chears buddy that worked a charm the one thing i wasnt doing was changeing the usb settings in active sync.
thanks a million
your post should be a sticky at the top of the forum
Click to expand...
Click to collapse
Thanks mate if it helps one person then it was worth it! I did find it strange that no one as done a guide before now ........ anyway enjoy your new ROM !
wrong post lol i'm an idiot sometimes

XDA dead on rom update

Hi
I have just tried to update the rom on my xda exec (downloaded from the o2 microsite) it seems to load fine, but when i do a reboot I just get a wierd green & red speckled screen.
I have tried to update the rom twice now, once when the xda was on, & once from the bootloader screen.
Both times it seems to install correctly, but i get the strange screen.
HELP!!!
Add. My battery seemed to go to about 30% whilst i was updating. Could it be the battery? Can't charge it now to test. Can still get in bootloader screen.
PLEASE HELP!! Thanks
Same Here
I have exactually the same problem!
I downloaded the latest ROM from the My-XDA webiste (O2 Ireland) and it supports the XDA Exec as sold in UK and Ireland.
The upgrade goes fine but when I hard reset it just get a fuzzy screen full of red/green spots (lise interferance on a TV).
Have reinstalled the ROM from another PC and the same thing.
Can access the bootloader (v2.01) with no problem.
Have downloaded the ROM from another PC and tried from there and same thing?
Can anyone help?
Is there a known good ROM file that someone has used to rule out the file, as the XDA was fine until I ran the update.
Please help,
IrishLad
search be4 post
Update
I have tried 2 other ROM's on my XDA Exec and its exactually the same issue.
Once it gets flashed successfully and reboots i get the hazed screen which i cannot use. So its not the ROM file.
Has anyone got help with this, I have searched the posts already and found no solution that it why I have posted this thread.
Please Help,
Thanks,
IrishLad
So its not just me then! Thought I had cocked it up.
If this has already come up in these forums, I cant find it. Please at least send link to the previous problem if it is in here somewhere.
My XDA is dead!
Many thanks for your time & knowledge
Mark
try this one
try this configuration :
O2 XDA EXEC WM6 crossbow
Rom version : 2.02.00 WWE
ROM date : 03/10/07
Radio ROM : 1.15.00
Protocol version : 42.51.P8
ExtROM :UNLOCKED
have fun
the screen is funky but the xda is dead
I too am having this problem and am getting very frustrated.
I have searched the forum for hours and am not getting any closer to a sollution.
If anyone has resolved this problem in the past please send me a private message. I will love you forever if you do.
I had the same problem i think its a dodgy rom on the O2 website
I went into boot mode and used this ROM
http://forum.xda-developers.com/showthread.php?t=297256
Works a treat and is loads better than the normal o2 Rom
Thanks for the feedback
I have tried a few ROM's already with no success.
I will however try the ROM you posted and let you know if it works...
Thanks,
IrishLad
IT WORKED!
Not sure how, or why this worked.
But i installed the Crossbow ROM as listed previous and its working.
And can I just say the Exec is brillant now, its much faster, more responsize and works perfectly.
Thanks for the info, but I had tried 2 different ROM's previously and they never worked let I used one previously with no problems.
Either way I am now staying with Mobile 2006.
Thanks,
IrishLad
ukron is a god
YIPEEEEE!
IT WORKED
Thank you so much
I am very happy. Could you tell?
help
i have the same problem as you guys.
and more i can get my xda exec in to bootloader usb at the top and v2.01 at the bottom
but when i got to update it with the wm6 upgerade mentioned earlier
i get a connection error, please con somee one help
im using vista could this be the problem i have a hdd around some where that has xp on should i try that.
also i dont know is any of you knew but when ur in that messed up screen
if you press the lightbuld button a sort of i guess diagnostics or somthing screen pops up
Enable KITL NO
Clean Registry Hive NO
Formate Storage NO
you can change the no/yes's iv only got the enable kitl to do anything though. change it to yes buy using the buttons by the screen and then the center button it take you to the screen below
Select KITL Transport:
USB KITL
SERIAL KITL
ETHERNET KITL
Select KITL Mode:
ACTIVE
PASSIVE
any help with this will be appreciate
where can we find that crossbow wm6?????is that the one thats needed???
Someone please post a link 4 crossbow wm6 latest
would really b greatful...im it to me, email, or post it either way is good 4 me
THANKS,
Randy
no need problem solved....wm6 crossbow was def. needed

Need Serious Help Urgently

I Am Unblocking My Spv M700 And Its All Going Wrong I Got The Tri Coloured Screen But I Have Lost Connection With The Active Sync And I Neeeed Help
Please Can Some One Help Me Through Email Msn Pm Or Here I Really Need Help
When you are on the tri colour screen you are at boot.
You don't need active sync connectivity. Make sure you install hard spl before you flash your device with anything else.
If anything goes wrong with flash hard spl will get you at boot mode again and you can reflash.
Read the trinity guides to get through flashing without any problems...
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
run the updater again once you lose the connection - it will work second time
thank you
ill try it
i got same problems. i tried to start it new several times , finally it worked.
hi sorry
i still havent done it can i add your msn??
it will be quickker
Wiggleyman
Please do not post the same question in half a dozen different places!!. This is Cross Posting and is a breach of Forum rules.
It has taken me some time to clear things up.
You search, read and post if necessary. You wait for a reply.
If you do not get a reply it may be because nobody knows the answer or morelikely the answer is easily found or worked out.
Above all do not cross post and demand answers too quickly. It upsets other members and you will find you do not get answers.
So lets continue with this thread ONLY.
Anybody that can help?
Mike
may he should try another hardspl or sspl ? what other member think about it?

[Q]Installing rom problem 262 error

Hey guys, I've used the search function to find an answer to this 262 error when updating to the latest rom. Mostly the answer was that the HardSPL needed to be installed, yet I've soft reset my phone and checked that hardspl has been installed.. and it has?
I've tried about 4 times now, and each time the install bar doesnt get any further than 0%. Any help or abuse welcome, please use small non technical words because I'm new to this, and all your abbreviations are driving me wild
which version on Hard SPL do u have? (can be checked by going into bootloader - instructions in Wiki)
What ROM are u trying to Flash?
Solved now guys, thanks for the feedback anyway.
Mods can close the post now.
How did you solve this problem? I have not been able to solve this yet.
It is so damn annoying, nomatter what I do I keep getting that darn error :S
This happens with evrything that I try to install.
The onlything that I have been able to install was HardSPL.
But even tho I installed it, does it not work :/

pls help phone dead

hi all
after phone couldnt powered on, been doing the tri color thing and tryed to upgrade to nrg's rom. while running the uspl it says phone not connected, but when i running the update it does recognize the phone till it gives the error 270
any suggestions why phone seem to b unconnected while trying runing uspl? thx
btw diabled firewall and antivirus
many thx.
Try using your stock ROM from bootloader....
thx for ur reply
ive flashed the original rom, and it worked, after been trying to update but still at uspl stage it says device not connected
such a shame, hoping threes a solution for this
the-light said:
thx for ur reply
ive flashed the original rom, and it worked, after been trying to update but still at uspl stage it says device not connected
such a shame, hoping threes a solution for this
Click to expand...
Click to collapse
Flash via SD Info of name for file can be found via search or in NRG thread know it was stated... "would find it but very limited data and pap speed"
managed to flash the beautiful rom of nrg-thanks a lot for this rom..
i cant seem to b able to c the windows folder though....
any suggestions?
thx

Categories

Resources