hi first this is kind of a duplicated post with this one http://forum.xda-developers.com/viewtopic.php?p=240152#240152
but i think its a better forum for it so sorry about that.
i'm haveing loads of problems with my new mda and need some advice regarding updateing the software on it
any help is real real apreciated
ok so i've been reading i got the phone in to boot loader so its displaying usb v1.00 i tryed running the rom and i got the country id error
i downloaded the no id wizard but now when i run that i'm getting
"error 264: connection"
and its telling me to check tothat the phone is connected which it is because when i plug it in xp tels me that a new device has been connected
any ideas ?
cusaeng said:
ok so i've been reading i got the phone in to boot loader so its displaying usb v1.00 i tryed running the rom and i got the country id error
i downloaded the no id wizard but now when i run that i'm getting
"error 264: connection"
and its telling me to check tothat the phone is connected which it is because when i plug it in xp tels me that a new device has been connected
any ideas ?
Click to expand...
Click to collapse
try here http://forum.xda-developers.com/viewtopic.php?t=42992
sucsesssss !
chears buddy that worked a charm the one thing i wasnt doing was changeing the usb settings in active sync.
thanks a million
your post should be a sticky at the top of the forum
cusaeng said:
sucsesssss !
chears buddy that worked a charm the one thing i wasnt doing was changeing the usb settings in active sync.
thanks a million
your post should be a sticky at the top of the forum
Click to expand...
Click to collapse
Thanks mate if it helps one person then it was worth it! I did find it strange that no one as done a guide before now ........ anyway enjoy your new ROM !
wrong post lol i'm an idiot sometimes
Related
Hi
I have just tried to update the rom on my xda exec (downloaded from the o2 microsite) it seems to load fine, but when i do a reboot I just get a wierd green & red speckled screen.
I have tried to update the rom twice now, once when the xda was on, & once from the bootloader screen.
Both times it seems to install correctly, but i get the strange screen.
HELP!!!
Add. My battery seemed to go to about 30% whilst i was updating. Could it be the battery? Can't charge it now to test. Can still get in bootloader screen.
PLEASE HELP!! Thanks
Same Here
I have exactually the same problem!
I downloaded the latest ROM from the My-XDA webiste (O2 Ireland) and it supports the XDA Exec as sold in UK and Ireland.
The upgrade goes fine but when I hard reset it just get a fuzzy screen full of red/green spots (lise interferance on a TV).
Have reinstalled the ROM from another PC and the same thing.
Can access the bootloader (v2.01) with no problem.
Have downloaded the ROM from another PC and tried from there and same thing?
Can anyone help?
Is there a known good ROM file that someone has used to rule out the file, as the XDA was fine until I ran the update.
Please help,
IrishLad
search be4 post
Update
I have tried 2 other ROM's on my XDA Exec and its exactually the same issue.
Once it gets flashed successfully and reboots i get the hazed screen which i cannot use. So its not the ROM file.
Has anyone got help with this, I have searched the posts already and found no solution that it why I have posted this thread.
Please Help,
Thanks,
IrishLad
So its not just me then! Thought I had cocked it up.
If this has already come up in these forums, I cant find it. Please at least send link to the previous problem if it is in here somewhere.
My XDA is dead!
Many thanks for your time & knowledge
Mark
try this one
try this configuration :
O2 XDA EXEC WM6 crossbow
Rom version : 2.02.00 WWE
ROM date : 03/10/07
Radio ROM : 1.15.00
Protocol version : 42.51.P8
ExtROM :UNLOCKED
have fun
the screen is funky but the xda is dead
I too am having this problem and am getting very frustrated.
I have searched the forum for hours and am not getting any closer to a sollution.
If anyone has resolved this problem in the past please send me a private message. I will love you forever if you do.
I had the same problem i think its a dodgy rom on the O2 website
I went into boot mode and used this ROM
http://forum.xda-developers.com/showthread.php?t=297256
Works a treat and is loads better than the normal o2 Rom
Thanks for the feedback
I have tried a few ROM's already with no success.
I will however try the ROM you posted and let you know if it works...
Thanks,
IrishLad
IT WORKED!
Not sure how, or why this worked.
But i installed the Crossbow ROM as listed previous and its working.
And can I just say the Exec is brillant now, its much faster, more responsize and works perfectly.
Thanks for the info, but I had tried 2 different ROM's previously and they never worked let I used one previously with no problems.
Either way I am now staying with Mobile 2006.
Thanks,
IrishLad
ukron is a god
YIPEEEEE!
IT WORKED
Thank you so much
I am very happy. Could you tell?
help
i have the same problem as you guys.
and more i can get my xda exec in to bootloader usb at the top and v2.01 at the bottom
but when i got to update it with the wm6 upgerade mentioned earlier
i get a connection error, please con somee one help
im using vista could this be the problem i have a hdd around some where that has xp on should i try that.
also i dont know is any of you knew but when ur in that messed up screen
if you press the lightbuld button a sort of i guess diagnostics or somthing screen pops up
Enable KITL NO
Clean Registry Hive NO
Formate Storage NO
you can change the no/yes's iv only got the enable kitl to do anything though. change it to yes buy using the buttons by the screen and then the center button it take you to the screen below
Select KITL Transport:
USB KITL
SERIAL KITL
ETHERNET KITL
Select KITL Mode:
ACTIVE
PASSIVE
any help with this will be appreciate
where can we find that crossbow wm6?????is that the one thats needed???
Someone please post a link 4 crossbow wm6 latest
would really b greatful...im it to me, email, or post it either way is good 4 me
THANKS,
Randy
no need problem solved....wm6 crossbow was def. needed
i tried upgrading the rom but i installed the same rom on my BA now it only shows USB v2.06 when its docked on the cradle...im getting error 120 when io try to update again
please help me i need ur advice
tnx in advance
Been There - Done That!
hey!
i had similar problems once...
check out my THREAD
make sure u check the "here" link in my last posting, you will find instructions for formating your pda there, after that u can tryto update again!
btw: there are plenty of threads in this and other forums on that topic...
hope that helps!
krztf
tnx
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
bolero001 said:
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
Click to expand...
Click to collapse
don't know if this applies to the BA, but i had that problem when messing around with splash screens on my hermes
All i did was reflash the offical manufacture radio rom only which resolved it
First of all, apologies for being a noob, especially if this question has been asked many times before....i realise that will be annoying (ive tried to search though, honest!!)
Every ROM Ive tried to update to my device keeps encountering the same problem:
I have the device connected at all times, and ActiveSync (4.5) is running....the device and my machine even go through a sync there and then.
I run the ROM program, and click through all the screens.....it checks my device, asks if i want to continue and heads to the % screen.
It interogates my device for a minute of so, then ActiveSync simply switches off, on the device screen there no longer appears to be a sync/connection, and then i get a "ERROR [260] : CONNECTION" message - the device has been connected physically all along but as I explained above has happened.
Its the HTC Touch (I assume im on the right forum, i was directed here!!), WM6 in French language (all the ROMS ive been trying are to WWE) Its that the prob, cant I go from WM6 Fre to WM6 WEE??
Also, the phone is currently SIM locked.....does that make a difference??
Is there something obvious (to you experts) that I'm not doing???
Thanks for your time, as I say, any help would be appreciated, since im trying to make a fist of this myself whith no prior knowledge in the subject!!
do you use vista or XP ?
do you try to use another usb cable ?
PS: you are in trinity section not the touch one
poussin69 said:
do you use vista or XP ?
do you try to use another usb cable ?
PS: you are in trinity section not the touch one
Click to expand...
Click to collapse
XP, and I dont have another usb cable, but its working fine for sync normally and charging.
Sorry, was given a link to this section so just assumed......erm, wheres the Touch one then???
Oh, and while Im here, anyone have any ideas before i repost this on the Touch one ta??
take a look here it can help I think http://www.planete-htc.com/index.ph...=0&PHPSESSID=d4d483fa99a83edb89e937c8f1e772bf
poussin69 said:
take a look here it can help I think http://www.planete-htc.com/index.ph...=0&PHPSESSID=d4d483fa99a83edb89e937c8f1e772bf
Click to expand...
Click to collapse
Cheers again, but erm.....i dont speak fluent french. The reason the phone's WM6 is in French is becuase i was given it by a family member who found it on holiday in spain (minus sim and contacts, so we have no way of finding out whos it is etc).
Any chance of a translation!!?? LOL
Use hard SSpl from DES check the Wiki page.
Maxieftm said:
Its the HTC Touch (I assume im on the right forum, i was directed here!!),
Click to expand...
Click to collapse
You're in the wrong forum?
This is a Trinity forum... HTC Touch is an Elf I believe?
http://forum.xda-developers.com/forumdisplay.php?f=373
Hi,
I've searched over this forum and cant find an answer to what I need so I figured I would post.
I have a HTC S620 (sim free) and it has WM5 on. I would like to upgrade to WM6. (not 6.1 yet.) I have looked over this forum and found lots of stuff on how to do it and I have tried 2 different ROMs and also watched the you tube video.
When I use the official wm6 ROM, (even before I have tried to install the ROM) my phone gets to the white screen stage and then disconnects which means the ROM installer doesnt work because the phone isn't connected.
I have also tried to isntall the kavana 6.1 version and the ROM installer comes up with an error code which says the model isnt compatiable.
The wm6 official upgrade looks more promising if any one has any solutions? although any solutions would be very welcome.
thanks
James.
jameskelsall said:
Hi,
I've searched over this forum and cant find an answer to what I need so I figured I would post.
I have a HTC S620 (sim free) and it has WM5 on. I would like to upgrade to WM6. (not 6.1 yet.) I have looked over this forum and found lots of stuff on how to do it and I have tried 2 different ROMs and also watched the you tube video.
When I use the official wm6 ROM, (even before I have tried to install the ROM) my phone gets to the white screen stage and then disconnects which means the ROM installer doesnt work because the phone isn't connected.
I have also tried to isntall the kavana 6.1 version and the ROM installer comes up with an error code which says the model isnt compatiable.
The wm6 official upgrade looks more promising if any one has any solutions? although any solutions would be very welcome.
thanks
James.
Click to expand...
Click to collapse
James,
How long have you had BT Anywhere as they have all been WM6 since over a year ago? Should bare any difference anyway, the phone will stop active sync when it goes white anyway.
You should be able to upgrade to WM6.1 without any hitches with following the "Upgrade to WM6.1" you should do this before hand http://forum.xda-developers.com/showpost.php?p=2807194&postcount=485 if getting error message "mind you may help if know what the message is?"
Hi cheers for the reply. It's not a BT one, its actually a second hand one off ebay so I assume its pretty old. Its just branded as HTC...
jameskelsall said:
Hi cheers for the reply. It's not a BT one, its actually a second hand one off ebay so I assume its pretty old. Its just branded as HTC...
Click to expand...
Click to collapse
Wow i must have been reading something totally different to posted lol
Still go with previous post to flash WM6.1 if you want to upgrade to WM6 you need to know what the original carrier of the phone is does it have a carrier plas on load?
Mind you i'd flash to WM6.1 if i was you as it's an advancemet far greater than WM5 to WM6
Hi again,
I've just tried the kavana 6.1 ROM following all the instructions you've said. It got as far as the white screen (through the DOS programme) and then it lost its USB connection which means the ROM installer wouldnt work as it couldnt find a connection. I'm running windows vista.
thanks
jameskelsall said:
Hi again,
I've just tried the kavana 6.1 ROM following all the instructions you've said. It got as far as the white screen (through the DOS programme) and then it lost its USB connection which means the ROM installer wouldnt work as it couldnt find a connection. I'm running windows vista.
thanks
Click to expand...
Click to collapse
When the whitescreen launches WMDC will stop sync and the computer takes over via it's own driver, did you leave it there with the white screen or just disconnect Dash when WMDC disconected?
ive yet to change a rom on vista because of the lack of ativesync which is really dumb
stylez said:
When the whitescreen launches WMDC will stop sync and the computer takes over via it's own driver, did you leave it there with the white screen or just disconnect Dash when WMDC disconected?
Click to expand...
Click to collapse
I left it there with the white screen, didnt touch any USB connections or anything. When I did this, the windows sound sounded (as in when something is disconnected) and the green light went off on the phone and the ROM installer wouldnt run because it says the phone is disconnected...Cheers for your help btw
James.
Isn't there a center key press on the d-pad in there somewhere? Are you doing that?
Hi guys, I've managed to resolve the issue and im all sorted now. Just used a different USB port. Thanks for your help
hi all
after phone couldnt powered on, been doing the tri color thing and tryed to upgrade to nrg's rom. while running the uspl it says phone not connected, but when i running the update it does recognize the phone till it gives the error 270
any suggestions why phone seem to b unconnected while trying runing uspl? thx
btw diabled firewall and antivirus
many thx.
Try using your stock ROM from bootloader....
thx for ur reply
ive flashed the original rom, and it worked, after been trying to update but still at uspl stage it says device not connected
such a shame, hoping threes a solution for this
the-light said:
thx for ur reply
ive flashed the original rom, and it worked, after been trying to update but still at uspl stage it says device not connected
such a shame, hoping threes a solution for this
Click to expand...
Click to collapse
Flash via SD Info of name for file can be found via search or in NRG thread know it was stated... "would find it but very limited data and pap speed"
managed to flash the beautiful rom of nrg-thanks a lot for this rom..
i cant seem to b able to c the windows folder though....
any suggestions?
thx