I Am Unblocking My Spv M700 And Its All Going Wrong I Got The Tri Coloured Screen But I Have Lost Connection With The Active Sync And I Neeeed Help
Please Can Some One Help Me Through Email Msn Pm Or Here I Really Need Help
When you are on the tri colour screen you are at boot.
You don't need active sync connectivity. Make sure you install hard spl before you flash your device with anything else.
If anything goes wrong with flash hard spl will get you at boot mode again and you can reflash.
Read the trinity guides to get through flashing without any problems...
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
run the updater again once you lose the connection - it will work second time
thank you
ill try it
i got same problems. i tried to start it new several times , finally it worked.
hi sorry
i still havent done it can i add your msn??
it will be quickker
Wiggleyman
Please do not post the same question in half a dozen different places!!. This is Cross Posting and is a breach of Forum rules.
It has taken me some time to clear things up.
You search, read and post if necessary. You wait for a reply.
If you do not get a reply it may be because nobody knows the answer or morelikely the answer is easily found or worked out.
Above all do not cross post and demand answers too quickly. It upsets other members and you will find you do not get answers.
So lets continue with this thread ONLY.
Anybody that can help?
Mike
may he should try another hardspl or sspl ? what other member think about it?
Related
First I'd just like to thank everyone in this community that helps me have the coolest and most useful device around. This forum is a wealth of information and there's no way I can describe how much I appreciate the work all of you put in. I do however have a problem that I am hopeful to help get resolved.
I installed LVSW 3.30 Cingular on my phone last night and it had been working fine although earlier I noticed that my ringtones seemed to be stuttering. When I got home today I started to add my programs back to my device since I didnt have a chance to last night. I started with Spb Pocket Plus, Weather, and Phone Suit, and Core Media Player.I then soft reset the device to complete installation and..... I can't get out of bootloader!
I tried soft-reseting the device with the hold ok/power button stylus method,then tried taking the battery out and in. That left me in bootloader. I then tried reinstalling LVSW 3.30 incase I had a bad install the first time but after install finished it stayed in bootloader where I repeated the soft reset. I then consulted the Wiki and tried the method for problem 4, "stuck in bootloader" to no avail. I've also been unable to find a like problem on the forum. I figure I probably have a bad boot sector or something to that effect but dont know how to resolve it. I have a Herm100 SPL-2.10 Hard SPL. I thank anyone in advance who can help me recover my device and sincerely apologize if I missed this topic already being covered.
Here is the thread you need to fix the problem. http://forum.xda-developers.com/showthread.php?t=286755
Thanks I've made a donation to the site for my incompetance
i tried upgrading the rom but i installed the same rom on my BA now it only shows USB v2.06 when its docked on the cradle...im getting error 120 when io try to update again
please help me i need ur advice
tnx in advance
Been There - Done That!
hey!
i had similar problems once...
check out my THREAD
make sure u check the "here" link in my last posting, you will find instructions for formating your pda there, after that u can tryto update again!
btw: there are plenty of threads in this and other forums on that topic...
hope that helps!
krztf
tnx
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
bolero001 said:
ive tried mtty and still id didnt work noting happens on my ba still stuck on boot loader...any other ideas or links im searching as well on this forum
tnx
Click to expand...
Click to collapse
don't know if this applies to the BA, but i had that problem when messing around with splash screens on my hermes
All i did was reflash the offical manufacture radio rom only which resolved it
Hi All,
first of all... if this question is being asked at the wrong place.. please let me know ;-)
Well.. i have a question.. I have a daxian x999 and want to upgrade the OS.. The OS on this device isn't fast and can be quite unstable sometimes..
anyone can tell me how i can upgrade this device?? I'm a complete newbie on this one.. so any help would be appreciated..
thanks!!!
no one has a clue??
Rom
hi there!
the problem with the daxian x999 is, that until now no one managed to extract the bootloader!
i tried almost every software i found here... no success!
i was able to extract the rom, but that doesn´t help too much
and another thing that is very sad, is that no one from the "knowing Guys" here is interested in helping us!!!
there was just one senior member trying to help me... (thanx again the_eqionoxe!!!)
i expected some more help from a forum with that much experience...
regards
chuckbert
You say you were able to extract the rom, please share how you did this ....
i was able to extract the rom, but that doesn´t help too much
Click to expand...
Click to collapse
Thanks
Sorry i found it in the very next search
As far as I know it should be presented in the form of a imgfs file (can be cooked by any kitchen). (*but I am not 100 % shure, I don't have a daxian to experiment with)
But I am unaware about the XIP format .
If we had a look @ a original update.img then we could say how it was compiled, and hopefully port other rom's to it.
any have yep put 6.1 on this phone?
I have a daxian x999 but its in chinese & if i cant get it exchanged will want to change the windows rom to an english one - cant find the english rom though (& need to learn how to do it too lol)
I used SPB backup to restore my data, and stopped it midway, now my power button does not turn on the screen. So I have to wait for a phone call to come in for the screen to come on.
Anyone know if I use an editor for registery if there is a place to turn this back on.
Thanks, if not, then I will start to research how to get deeper into the phone, as it is useless to me know.
"I used SPB backup to restore my data, and stopped it midway, now my power button does not turn on the screen. So I have to wait for a phone call to come in for the screen to come on.
Anyone know if I use an editor for registery if there is a place to turn this back on.
Thanks, if not, then I will start to research how to get deeper into the phone, as it is useless to me know."
Have u tried a soft reset?????? or maybe a "master clean up" as it is called on the phone???
also if someone here is going deep into the phone, can some1 figure out how to 'manage' the accelerometer for the current application/settings of it seem pretty dull... i don't know if it helps, but the process which rotates the screen is called acc_ap and you can find it in the start up folder
Yes, I tried the soft reset, memory clear, and hard 3-button reset, no joy.
nobody tried with pdocwrite as MUN_rus has done with HTC wizard G4??
WARNING This device needs OTHER drivers than a HTC ELF(in), so make sure you cook a ROM with the proper drivers!!.
You can probably dump the rom by the reverse command pdocread..
Haven't tried it myself, as I have stated before, I have no daxian 999 to experiment with myself..
Hello,
Excuse me for posting here, if it is not appropriate, but i can not find a solytion elsewhere... yesterday i installed a greek rom by grigoris and my diamond would not synch with pc any more. How can i solve this problem please? I can not rll back to another rom, or do anything. Is there a solution? I appreciate your help
Dimitris
Try putting it into bootloader .....then see if it connects
Tell us what you have already tried.
band27 said:
Try putting it into bootloader .....then see if it connects
Tell us what you have already tried.[/QUOT
Thank you for your reply!!!
The story goes like this:
I had this wonderful rom, duttys, and when i saw that there is a greek one, although i heard a voice inside me trying to stop me from doing it, i installed it.
Then, all of a sudden i realised that I could not connect back to pc. The rom is not what i had expected I am afraid and i wanted to roll back. But, i can not make the connection. I blamed my pc at first, but the same happens wherever i try it. SO it has to be the rom.
I do not consider myself and expert at this, So this seems to be another problem for me. One has to learn from his mistakes i guess.
Now, I do not know how to do this "bootloader" you are suggesting.
These are my steps, apart from reading through the forum...
Click to expand...
Click to collapse
Help Help, please, I need your help please,
I am really new to this forum. I have been reading a long time the forum, and see evolution of cooked rom. I love the Tomal version 8.2 19960 that was on my Jasjar Imate. When I try to put the Vanillla version 8.2 I think that I mismatch myself, and unfortunately I should get back when I saw the error code 120. What I did, I say yes, and now have a blank screen. Nothing happens. Badly again,again, I have seen before this message USB on top and 2.01 on the bottom, but after I pull out the battery and change for another, I cannot connect anymore the device to the computer. It gives me this message <USB device not recognized> or < Windows cannot recognize a device attaching to you computer>. I kept trying all times, and now that this message, I have on my computer.
I think I did break my device myself, or I have all my stuffs in it, my passwords, my agendas, my contacts and so on.
Howw can anybody help me get out of this mess and recover my device. Please, I need help. Your help please.
Gerard
Universal Imate JasJar broke after error code 120 - Message USB Device not recognize
Thanks to post already done in this forum. I searched and brwosed all <USB not recognized> installed many utilities but without success. Finally, I discover the post < Instructions for those stuck on Boot Screen (UNI_exitbootloader> in wiki.xda-developers.com and I get results, my device has been come to life again, it was RESURRECTED.
I follow exactly, that the solutions, I tried before, but in panic and in a hurry you could miss to steps and to pay attention to the instructions, but I retry again and again and finally it did work. And I put the Tomal 8.2 19960 again on my Imate jasJar and bingo, it works.
For sure, I have not seen the blue screen <clubimate> again, but a black screen, and at the bottom te version 1.15 radio, 8.2 TML and so on, but it doesn't matter, I am so glad to see all the functions come again to life, and put my sbp backup and bingo, I do have all my data and software back, as I take precautions allways to make a backup two days ago with sbp.
MANY THANKS TO XDA-DEVELOPERS; TO XDA DEVOPERS WIKI, AND TO THE PERSONS OR THE TEAM THAT FOCUS ON ANSWERS TO HELP PEOPLE LIKE ME AND OTHERS get out freely and sincerely to theirs problems.
I hope this post will help others to keep visiting and searching xda-developers for solutions of their device needs.
All the best