I've done a lot of searches, but I haven't found any thread that solves my doubts...
I have a 2 GB Sandisk MicroSD in my HTC P3300 and it works perfectly (in fact I never suffered the corruption bug), but this is very few storage for me so I need a 4 GB memory card. My questions are:
1st - Does it exist any 4 GB MicroSD (not MicroSDHC)? I've readen some posts talking about them and I've seen some links in eBay shops, but nobody has confirmed if they are fakes. Anybody could tell me if 4 GB MicroSD exist and where to buy them?
2nd - If you have a 4 GB MicroSD, have you tested it in your HTC Artemis? Does it work? Have you got WM5 or WM6? Official or "non-official" ROM?
3rd - If you have a 4 GB MicroSDHC, have you tested it in your HTC Artemis? Does it work? Have you got WM5 or WM6? Official or "non-official" ROM?
I've opened a poll to know more clearly if I have the possibility to upgrade my storage card or I'll have to bear with that poor 2 GB Sandisk... Please, vote and write a post telling which brand/model of Artemis and MicroSD/MicroSDHC do you have and what operating system and ROM version do you use
Sorry for my bad english, I hope you haven't suffered to understand this message
Thanks
Nobody has tested a 4 GB MicroSD/MicroSDHC in his Artemis? I cannot believe it!
Regards
Someone did test a 4gb card and it didn't work for hin. On my phone right now so doing a search would be a pain. Search for sdhc in the Artemis mobile 6 forum and you should find it though.
JanetPanic said:
Someone did test a 4gb card and it didn't work for hin. On my phone right now so doing a search would be a pain. Search for sdhc in the Artemis mobile 6 forum and you should find it though.
Click to expand...
Click to collapse
Thank you for your answer
The thread you were talking about is this one. In one of the last posts a person says that he/she has tested a 4 GB Sandisk MicroSD in the Artemis with negative results, but doesn't specify if it's a High Capacity MicroSD (MicroSDHC) and in which OS the test was done
I would like to know more opinions and to see votes from people who has tested also a 4 GB MicroSD (HC or non-HC), I'm sure that there are more users who has experience with this kind of memory cards and we all would have a more clear idea if they tell us the detailed results
Regards
Well if you or someone can point out a couple 4 GB cards that are available in the U.S. online I will buy up to 3 to test just to try and bring some closure to the question.
The only 4GB micro SD card I could find was out of stock (J&R music). Based on a little searching it seems to perpetually be out of stock. I added myself to get an alert should it come in however.
I have done a bit of research and I am pretty sure the P3300 will not work with a 4GB card, but I am willing to try.
It is not the traces or the pinout on the card as many have surmised that is the problem though. The SDHC uses FAT32 whereas SD uses FAT16. So unless the system has the capability of reading FAT32 the question of circuitry is moot. Everything I have read points to 2GB being the limit for non SDHC and that the P3300 does not support it.
Another common misconception seems to be that there are non SDHC 4GB micro sd cards. I see no evidence that this is the case. Furthering the improbability is the fact that the Fat16 has an upper limit of a 2GB partition. (There is an exception to this where the FAT16 uses 64K clusters, but this is unlikely to be done or work in ANYTHING without custom drivers. I never even heard of this till I did this research.)
None the less I would be happy to be proven wrong.
I've read a thread somewhere in this forum where a senior member (or was it a mod?) had drivers to make the artemis sdhc capable which usually is not possible if the hardware is not built for that. Search for it and maybe you'll find it.
I have read most of those threads and none are conclusive.
You also can not do anything with drivers if the hardware is not already compatible. There is not any question that the p3300 does not officially support microsdhc.
The debate rages and a thread like this keeps coming up.
From what I've read so far, the only thing required is a SDHC driver. There should not be problem on the hardware side.
Some say the WM6 ROMs have SDHC driver. My Wizard has WM6 and the driver on it looks different, but I don't have a SDHC miniSD to verify. Ultimately, to prove it works on Artemis, I need a 4Gb SDHC microSD so I can try the stock drivers and may be copy the drivers from my Wizard.
SanDisk 4GB microSD-HC DID NOT WORK on MDA compact III
Hello,
I`ve an MDA compact III which was delivered with WM5 OS. I`ve an 2GB microSD - Card from Sandisk, working perfectly. A little bit small that thing for my big fingers... =
Now I was searching for higher capacitys of microSD - Cards and found an SanDisk microSD-HC with a capacity on 4 GB. Bought for app. 60€ and testet on my device: NOTHING. No work. The WM5 OS did`t recognise the Crad. The card is`t shown inside the System. It seems like NO card inside the device. The card is OK. There was a little USB reader in the package, where I can access to the card.
OK, maybe it is the WM5 OS and I decided to upgrade to WM6. (German O² OS using the UPL method...) The upgrade was done in 10 Minutes, but the card works NOT! The same reaction like on WM5.
Now I`m wayting for an patched OS with (maybe) an SD-HC driver inside. Let`s pray...
Best regards, Sven
The Artemis is not able to read/write microSDHC Cards. The Interface of the Artemis permits only FAT16, microSDHC works only with FAT32. Artemis cannot recognise it. Normal microSD with 4 GB if should be at least recognised.
JanetPanic: Before opening this thread I had done many searches to get information about SDHC, and I know that SDHC compatibility is a hardware problem rather than a software/drivers problem. However, I hoped that our HTC Artemis had a SDHC compatible slot, looking at HTC Trinity's example... By the way, before the Artemis I had a Dell X51v with a 4 GB SD (non-HC) that worked like a charm; I expect that in a -near- future there'll be 4 GB MicroSD cards
lSSBl: Very interesting your MicroSDHC "review", althought you have ruined most of my hopes. Let's pray that future WM6 official ROMs will give the Artemis the ability to read MicroSDHC cards
AlfredENeumann: I tell you the same as JanetPanic, the HTC doesn't have officially a HC compatible slot and however it supports that kind of memory cards. Let's pray...
Regards
@AlfredENeumann
You're wrong. The Artemis accepts FAT32 as well as FAT16 SD cards, no matter if WM5 or WM6. But that has nothing to do with SDHC, what till now doesn't work with the generic WM6 drivers.
perhaps a solution: http://msmobiles.com/news.php/6308.html
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
That means, that the SDHC card is NOT backward compatible - you can't format it with FAT16, but you can format any 'normal' (micro) sd- card with FAT32, and it still works at the artemis. Tested by me, and a lot of other guys.
Has anybody Tried the SDHC driver from the HTC Trinity yet?
http://forum.xda-developers.com/showthread.php?t=293556
4 gb micro dilemma
Hey guys... see if you can help me out.
Installed the 4gb micro sd on my HTC Artemis and the SDHC driver from the previous post... windows mobile 5 doesn't recognize the card.
Not sure what to try, open to any suggestions.
c.
crap
Actually, after I've tried the 4gb Micro and installed the Trinity driver.. NONE of my storage cards are recognizable now. So I removed the driver.. and STILL none of my storage cards are recognized. BUSTED?!? Not sure how to fix this?
c
SanDisk have just announced an 8GB micro SDHC.... time we got these SDHC cards working in our devices! Anyone have any input on how we can find out if this is possible?
Sandisk 4gb SDHC no go
Hi all, just to let you know I tried all the WM6 rom's on these forums (thanks to all), reformated my sandisk 4gb microsd card fat 16/32 but no go..
(my 2gb sandisk card works fine with fat16/32), even tried trinity driver no go.
Hopefully the new WM6 rom from HTC this week will support it.
Related
From PRETEC, here:-
http://www.geekzone.co.nz/content.asp?contentid=6609
:lol: :lol: :lol:
I found one on eBay for £96.00 + £4.00 p&p.
150X 8GB OEM SAMSUNG SECURE DIGITAL SD CARD 8 GB G NEW
Looks good.
Gonna test that on Universalinux too?
wonder if it will work in a prophet (JAMin)
RE
If your PDA do not have a SDHC slot then PRETEC card is not backward compatible
Quote
"SDHC cards are recognized by new SDHC host devices differently than standard SD cards and are not backward compatible with legacy SD format host devices. "
Bad luck!!
What IS SDHC compatible?
I was gonna ask that one, so i will ask it anyway!
What is SDHC?
Never mind, i found this information:
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf#search="sdhc compatible"
But now we need to know whether our Universal is SDHC compatible or not. Has anyone managed to find out if these new cards work with our PDA's?
Maximum capacity for this device: May support up to 2GB
But we know that's already true. So...
This quote is right from the article linked to by the first post here...
The maximum capacity of SD card is 2GB under SD 1.1 of Secure Digital Alliance (SDA) specification; however, by using file format of FAT32, many SD 1.1 host devices can use a 4GB SD card. SD 1.0/1.1 uses traditional "Byte Addressing" scheme which limits the maximum capacity to 4GB while SD 2.0 adopts "Sector Addressing" scheme which can reach the maximum capacity of 2TB (2048GB).
Click to expand...
Click to collapse
In other words, they 'cheat' to get the Universal and other SD 1.1 devices to see 4G, but that won't work with the 8G cards.
Brett
Would the Universal still not work with an 8GB SD card if that card was partitioned into 2x 4GB's? It certainly would be helpful if someone could try this? You just never know!
re
I guess no one will know for sure until someone tries it. BTW how do you partition a SD card anyways? Do you really think that could work?
hello
if SD 2.0 is the later version then would not all new 4 GB SD cards support "sector addressing" which would limit the ma. capacity to 2 GB
I have a 4gb that works in uni
I keep reading that people aren't able to use anything above a 2gb SD but I have been using a 4gb that I purchased on eBay for pver 6 months now. I used in with the original Jasjar ROM and also with JWrite's, Indra, and currently Helmi's. (not with the WM6's yet though)
It is interesting to note however that it won't work in any of my desktop or laptop systems without the included dongle. Not even the built in SD slot in my TC1100 tablet.
It says it's made by a company called "TopRam" if that helps anyone.
I also purchased an 8gb that SUPPOSEDLY supports SD 1.1 and 2.0 according to the documentation. It took a great deal of hunting to find one that didn't say it was HC and I'm still skeptical as to whether or not it will actually work, but as soon as it comes in and I have a chance to try it I will post the results here if anyone is interested.
I know there are one or two people here who make claims of such things, but if there are any doubters I will take some screenshots of the storage card memory screen if I need to.
SDHC uses a different software for the controller. The hardware is exactly the same. The point I'm trying to make, is that the SD people went to very radical lengths to ensure that there is no compatibility betweens SD and SDHC. They also have two different kinds of memory addressing. Bottom line, you can't use SDHC. Your device must say SDHC, and AFAIK, no PDA is SDHC compatible. With all of that said, I'm a Scoter owner, and we have valid reports of being able to access SDHC cards from a PC, through my device. It may be possible to create drivers for the SD controller, or create some kind of emulator, but that is a long way off. I've seen similar threads about those asking about 4 GB and 8 GB. Unfortunetly most don't understand the difference between SD and SDHC. SD is capable of 4 GB. SDHC starts at 2 GB and has potential in the terrabyte range. In addition, many of the real cheap 4 GB SD cards don't strictly adhere to SD standards, and may work on some reader designs, and not on others. A perfect example is that I bought a 4 GB SD card, that only works on one card reader, but not my PC reader or PDA.
Regards,
Jason
SDHC Patch
I just read on a forum for Palm Treo that they have a working patch for the Treo which forms compatibility of SDHC on the Treo.
Now perhaps we can take a lesson from them and see what changes where needed to make it work. Besides, you can't tell me that there are more people working of patches for the PalmOS than WM.
well , the sdhc 8gb does not work on my xda exec-universal. so I just bought a 4gbcard "MyMemory 4GB 133X SD" from ebay that is stated as being compatible 21.94 pounds.
I'll just use my sdhc 8gb as an expensive mem stick in my sweex sdhc reader .
got it
So I received my 8gb (supposedly NON SDHC) and as expected, it won't read in my Jasjar. I am going to try and reformat it into 2 or 4gb partitions to see if that will work but I am going guess and say no. It is already in fat32 but it doesn't recognize the card at all in the PDA. Just to make sure it was in fact a full 8gb (7.6gb actually) I copied a handfull of movies (7gb) to it and then ran them on another laptop and it is in fact a good card.
I can't repartition it in XP since it sees it as a removable disk, so as soon as I get my Linux laptop back up and running, I will repartition it there and see what happens. I don't expect much though.
TBOMB said:
So I received my 8gb (supposedly NON SDHC) and as expected, it won't read in my Jasjar.
Click to expand...
Click to collapse
Could you, please, try AKU 3.5 ROM (Helmi 1.3.1 or Ivan B2)?
Because this ROM comes from device which support SDHC.
There were reports also, that Triniti with last Dopod ROM (AKU 3.5)
support Mini SDHC 4GB (maximum for mini SD now).
BTW tell us which ROM you are tryinng.
why not
If someone will send me the link to the rom files, I'll be glad to. I just don't have a lot of time right now to search the ftp site.
Two questions about Helmi's 1.3.1, first, will it support my bluetooth stereo headset like the pdaviet 207 I'm using now does? and second, I don't suppose any of these new roms has the new timechange fix already applied do they? I just don't want to keep reflashing my Jasjar and still having to apply all the reg fixes etc to correct for the new timezone/dst changes.
Guess nobody was in a hurry for me to test using the other ROMs as I have had no PM's with info as to where I can find the ROMS now that they are no longer on the ftp server here.
I find my copy of Helmi's aku3.5 1.3 and tried it with the 8gb (non-sdhc) card with no luck. I assumed as much. Not quite sure where you heard that it had SDHC support but I guess it doesn't.
I had the PDAVIET 2.0.0.0.7 or whatever the latest incarnation was and that didn't work either. I now have Helmi's WM6 1.1 that I put on last night and that one also doesn't work.
I'm sure we have some developers out there who know palm and ppc hardware who can take a look at the "fix" that was created for the Treo which allows SDHC use. I can "open" the prc file but I don't know enough about what I'm looking at to be helpful.
Not sure why this fix is so slow coming. Perhaps not enough people see the need for 8gb cards. I have a 4gb but I have to continue taking off stuff in order to put anything else on because it's always full.
... on my MDA III compact with:
- WM 6 (official HTC Release: HTC_P3300_GER_3.13.407.1_4.1.13.44_02.94.90_Ship_R.exe)
- SDHC Patch
I bought a 8 GB SDHC SanDisk and it works fine!
Costs: 78,50 € inkl. Shipping (inside Germany)
I ordered Tuesday and get the Card Thursday
Greetz
Snake
I too have bought a Sandisk MicroSD SDHC 8GB card which finally arrived from eBay seller nextdaymemory today. I installed the SDHC patch recommended by StefChri in this thread:
http://forum.xda-developers.com/showthread.php?p=1720617#post1720617
Works perfectly!
Where did you get it?
Hi Snake28,
where did you get the card?
Valen
Works with Artemis Touch 3.01, 5.2.1921 SDHC
It works with the mentioned rom. Although I had some problems with recognizing in the beginning, I flashed the rom again and I worked immediately.
Brought it from memoryshop.nl (Dutch)
http://www.memoryshop.nl/geheugen/425/microsd-(secure-digital).html (Now, the card is temporarily out-of-stock)
My costs were: €86,00 all-incl. (send within the Netherlands)
Brought it the 6th of [email protected], got it the next [email protected]
@ Valen42:
I edited my Post, because I don't know about Direct Links ..
Please Google @ KQ Flash and you will find it immediately!
Greetz
SNAKE
I also bought 8GB SDCH for my artemis running wwe 3.1 including bepes sdhc hack. anyhow its quite slow, sdtools showed me like 300 kb writing and 700 kb reading spead. Sandisk tells class 4 cards run about 4-5 mb read/write.
Anyone any idea, what could be my problem? I wondered wheather the card is fat 32 formatted, how do I find out?
I have the same problem. Writing to the MicroSD via the O2 XDA Orbit (Artemis) is very slow. I have tried putting the card in the small Sandisk adapter which the card came with and it is also slow. BUT when I use a different MicroSD card reader/writer (USB2.0) it works much faster (140 MB file writes and reads in 10-12 seconds). The reader is one of these:
http://cgi.ebay.co.uk/TRANSFLASH-MI...ryZ51082QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
So it seems to be a hardware problem.
4GB kinsgton work flawlessly also.
One other thought ... have you got the "encryption" enabled for data transferred to storage cards? I think this slows the data transfer even more through the Artemis. It is still slow though, as the data connection between my Artemis and my computer is still only a maximum of 10 Mbit/s (i.e. c. 1.25 Mbyte/sec max).
In my post at:
http://forum.xda-developers.com/showthread.php?t=350383
you`ll find a Benchmark I did with an "old" 2GB MicroSD and an 8GB Micro SDHC Card.
Surprisingly the Performance of the 8GB Card was much better then I expected with the SDHC-Drivers provided by this Community.
When I reformated the 2GB Card to FAT32 to work with the new SDHC Drivers Speed went down significantly. But the provided .pdf File shows all this Data quite well....
Regards
Jabami
lol i'm going to buy one to but they aren't in stock have to wait
Can anyone explain the different classes of card available (class, class6). Is there a particular one needed for the orbit/artemis.
Also - I note that you can get 16gb cards. Anyone tried one yet??
My Orbit worked first time with an 8GB Scandisk bought via EBay.
Down loaded and ran this .cab file as suggested earlier:
http://members.cable24.at/immogroup/...HC-Artemis.cab
Running WM6. No need to re-format.
The complete link is:
http://members.cable24.at/immogroup/HTC-P3300/SDHC-Artemis.cab
HEYWOOD said:
Can anyone explain the different classes of card available (class, class6). Is there a particular one needed for the orbit/artemis.
Also - I note that you can get 16gb cards. Anyone tried one yet??
Click to expand...
Click to collapse
12 GB will be available in February and 16 GB in June or July. The class indicates the minimum writing speed, so with class 2 you will be able to write data to your card with at least 2 MB/sec. I don't think your pda will be able to write more than 2 MB/sec. but you can try it out.
Registerme said:
12 GB will be available in February and 16 GB in June or July. The class indicates the minimum writing speed, so with class 2 you will be able to write data to your card with at least 2 MB/sec. I don't think your pda will be able to write more than 2 MB/sec. but you can try it out.
Click to expand...
Click to collapse
Thanks for the explanation.
16GB cards are available on ebay - I know it has its risks, but they are there
i orderd mine today should ship in tomorrow so i will let you guys know my findings
It Works :d:d:d:d
will 8 gb work with wm5? if so anythign i need to install? cab etc?
if not whats the maximum size i can safely install?
got windows mobile 6.1(latest black ver.), didn't try others
8gb sdhc class 4 works fluently!
Hi,Does anyone know if 838 pro supports 8G micro SD card? Thanks
yes
i have spv m3100 with vp3g 3.62.3 5.2.1622 build 18128
radio 1.54 sandisk 8GB and it is working very good
There's a load of other threads on this if you search. Answer is yes.
WB
Thank you very much . Micro sd 2 g nearly full .I have to get one
btw_: it supports up to 32gb if needed (sdhc standards...)
woah 32GB?!??!
when that becomes economical, i'll buy one and start using my hermes as a portable hard drive...if only bit torrent worked on a hermes....*grin*
It does...
http://www.engadget.com/2005/07/14/winmobile-torrent-bittorrent-client-for-pocketpc/
WinMobile Torrent's been around for ages. I'm sure there's other clients, too.
Sign up for Skyfire Beta
Currently, our private beta is only for users with Windows Mobile 5 and 6 phones, with a U.S. phone number. We will soon be expanding our beta to international users and other Smartphones.
hmmmmm.... nice....
Hi everyone, for my first post I'd like to rreport that my 8g sandisk sdhc micro sd card is working perfectly. I'd advise anyone to go for the sandisks rather than a cheap ebay knock off!
Yes...but only with some 6.0 roms and all 6.1 roms. That roms adds driver for SDHC
why does my 4gb and 8gb SDHC cards always kill themselves, but my 2gb mini SD is fine?
I'm using a 4gb SDHC san Disk
and a 8gb kingstong.
and a 2gb adata.
Thank you!
Do a search for "sdhc wm5 patch". Download, unrar and run the cab file. Make sure it installs on the Hermes, NOT the SD card...
Cheers...
my lil bro is using Wm6.1 blinky's rom.
does that patch just allow SDHC? or does it fix my problem?
because i can see the card.
thanks
I'm using this rom from vp3G's wm6 v362 AT&T rom
http://forum.xda-developers.com/showthread.php?t=334946
on my herms 300 using 8525 housing and it read my sandisk micro sdhc 8g and working fine
Could just be the Hermes doesn't like them, especially if they work in an sd card reader. I have had bad cards before but the pc also couldn't read it.
I use a sandisk 8Gb card and have had no probs... My advice, go with works for everyone else, it may cost a little more but it saves on the headaches....
Cheers...
thanks
It works in a the SD card reader and i can use them fine in my camera. it never messes up in the camera.
thers no point in me buying a 8gb sandisk if my 4gb sandisk won't work either.
about that WM5 SD HC patch. is that for WM5 phones only? should i install it on my WM 6.1?
Thanks
Your wm6.1 rom should already be sdhc compliant, but yes, it should work fine on wm6( theres a wm6 varient). It was only WM5 and a few WM6 versions that weren't.
Are you sure its an ORIGINAL sandisk as I've had a few fakes that died horribly on me too.
Cheers...
I doubt new egg sells fakes...
But thanks.
Thank for answer I want to know it
i use in my hermes my older sdhc 8 gb by sandisk and all right
SD High Capacity memory card drivers for Fujitsu-Siemens C550 and Fujitsu-Siemens N560.
After installing this driver you have working WiFi!
Created by GreateVK and FreePK
This is really exciting stuff!!! unfortunately i won't be able to try this out until 1 month later as my N560 is critical to my daily routine until then (which is also when i'll be finally giving WM6 a go).
Been waiting for this for a long time... any more info? supported capacity? restrictions? compatibility?
GreateVK,
Will this work on an N560 with the original WM5 ROM, please?
Or does it have to be WM6 or WM6.1?
Thanks...
It works great on my N560 with newplow's WM6_016_net3_5 rom so far
Thank you master2048 for answering my second question.
But has anyone got it working on an N560 with the original ROM?
Does it install to main (user re-writable) memory or does it change a portion of the ROM image? If the former, then it might be possible to try it on WM5 devices and then revert by uninstalling the patch if it does not work...
Great work.
I use it on my N560 with original WM 5 ROM, and i use 8GB SDHC, so it works very well. Wifi is OK.
honzamo said:
Great work.
I use it on my N560 with original WM 5 ROM, and i use 8GB SDHC, so it works very well. Wifi is OK.
Click to expand...
Click to collapse
Thanks you for your reply.
And I can confirm that it works on my N560 with original WM5 ROM too.
I bought a 16Gb SDHC and WiFi works too. And ordinary SDs still work fine.
Excellent..... this has given my N560 a new lease of life.
Many thanks to GreateVK and XDA Developers. Brilliant work.
N56 SDhc Card Driver
honzamo said:
Great work.
I use it on my N560 with original WM 5 ROM, and i use 8GB SDHC, so it works very well. Wifi is OK.
Click to expand...
Click to collapse
I´d like to report the same good experience, the SDHC CARD Driver is working well on FSJ N560 original WM 5 Rom with a 4GB TECHNAXX Hyperspeed Card, WIFI ist running normal as used to be.
Thanks to the Developers
Axleu
can anyone comment on the speed of using SDHC? is it really able to sustain the Class speeds? cuz currently my Transcend 4GB 150x non-SDHC is really slow, but I know it's partly the card's problem.
-SKYLINE- said:
can anyone comment on the speed of using SDHC? is it really able to sustain the Class speeds? cuz currently my Transcend 4GB 150x non-SDHC is really slow, but I know it's partly the card's problem.
Click to expand...
Click to collapse
I have a Integral Class 4 16Gb SDHC. It is hard to say if it is any quicker than the Transcend (which I was using before applying the SDHC patch). I agree the Transcend was not zippy. But the Class 4 SDHC seems very fast. It is obviously imited by the Loox addressing/reading speed and therefore may not be able to take fulladavantage of the potential higher transfer speeds.
However, the few tests I have been able to run e.g. copying 8Gb of stuff on from a PC to the SDHC card in the free card reader that came with mine, was very quick. And there were thousands of files... large 300Mb plus and lots of small ones circa 1Mb. Also video playback on TCPMP was just the same as with SD cards - this would be a good test of sustained transfer rate....
So the performance in my judgement is the same and possibly better.
WM6 Rom
I bought Fujitsu-Siemens C550 recently and it came with WM5. Could some body let me know where can i get WM6 rom for this device.
I've installed this SDHC driver on my N560 with Team's 777 WM 6 ROM and so far so good . But I'm using a regular SD 2 GB. Now that I can get a large SD I may go for 8 GB .
THANKS TO THE DEVELOPERS
works beautifully
Problem aftet Hard reset
Aftter Hard Reset, the SDHC driver is gone. My N560 did not recognized the 8GB SDHC card any more. I had to reload the SDHC driver from the PC and only then I could activate my SPB Backup file.
Is there a way to add this driver in such a way that it will survive hard resets? Otherwise it will be a mess if someone needs to restore while being away from his PC
Please advice
I belive that there's an N560 ROM that has it built it. But you could carry a small capacity SD with a full backup, once you have it up and running you could put your SDHC again.
It may sound a bit trivial, but I'm using an old low capacity SD card (64MB !) for just having the driver stored there.
After a hard reset I would first use this SD card to install the driver, then using my (standard) HCSD.
SDHC driver
Yes, that's what I'm doing too (low capacity SD with important system files).
But anyhow, is there a method to "burn" a driver into the existitng WM 6 ROM of N560?
Thanks
Bettet solution
I managed to store the SDHC driver file (some 32KB) on my mobile phone memory (internal od memory card). Then by connecting via Bluetooth's file transfer profile, I can transfer the driver to my Hard Reseted N560 and continue from there. No need to carry an additional SD card (which can get lost easily), no need to access a PC and my phone is always with me.
Thanks for this it is fantastic my N560 is finaly working with HC card and Wifi is on THANKS:
Thanks ! it was the ultimate improvement I was waiting for on my loox...
I have one question, not on original rom but on the Micro SDHC supproted any cooked ROM will support 16 GB or NOT?
Tell me if anybody knows,
If yes i want to buy it......
I know 8 GB is supported in Artemis SDHC supported ROMs,
I own 4 GB now...
It supports SDHC or not, you can always partition your SD.
Regards,
Carty..
but i have micro sd card slot not a sd card slot
Carty said:
It supports SDHC or not, you can always partition your MICROSD.
Regards,
Carty..
Click to expand...
Click to collapse
I hope you understand it now
If your device supports SD2.0 (SDHC) then it will take any MicroSDHC size up to 32GB. Hope that helps
incredulous said:
If your device supports SD2.0 (SDHC) then it will take any MicroSDHC size up to 32GB. Hope that helps
Click to expand...
Click to collapse
That's the que I m asking that in the factory made original ROM this Artemis dont support more than 2gb, but after an upgrade by a little software or any sdhc supported ROM it's supporting upto 8 gb. So, as Htc says its not SD2.0 compatible.
So after that also(after upgrading) will it support 16 GB.
That's my que.
Does microSDHC faster in real word ?
Such as record VDO, Take a picture, activesync...
I thought I answered your question. Any device that takes a SDHC card WILL take anything up to 32GB MicroSDHC.
you said you have 4gb card, it is SDHC, so you can put the 16gb card, you can also put a 32gb if you can find one.
Thanks man
so my artemis will support 32 GB
fantastic
where did you found the 16gb card?
I made a search and not found to buy one.
idk if it helps any1, but i have 16GB kingston in my artemis, rom is touch vanilla 4.0.2
it reads it well, i use it for music and all that, but sometimes it freakingly losing it, totally =( i have to soft-reset my device to death, like dozens of times to get my sd back. that's A problem, and idk what to do w/ it. trying to find a solution.
in a meanwhile setting up touch full with cube 4.0.2.
chiqo said:
where did you found the 16gb card?
I made a search and not found to buy one.
Click to expand...
Click to collapse
try it you see and order in --> http://shop.ebay.com/?_from=R40&_tr...&_nkw=16+GB+Microsd&_sacat=See-All-Categories if not wrong price less than $ 39.59 Free shipping