SPV m2000 Replace Touch Screen - MDA III, XDA III, PDA2k, 9090 General

Probably posting in the wrong place, but giving this a go.
I have an SPV m2000 with a broken touch screen and need to replace it, I am expecting one in the post and want to know if anyone has step by step instructions as how to do so. I have alreay bought one and broke it trying to change them over.
Any advice would be very much appreciated.

I never changed the screen on my BA but I have disassembled it to paint the housing (wich isn't bad but already have a new one on the way).
I simply removed every screw I've found and I belive in the wiki there are some pictures of "where goes what". As far for the screen I don't really know how you broke it but when I opened my device and put it back again I had no problems.

Related

XDA iis touch screen not working

Hi everyone, this is my first post here but I have been reading the posts on here since I first became interrested in the idea of a PDA phone a while back,
I have just bought a 2nd hand XDA iis here in Australia, and found that the touch screen is not working, (worked when I got it, and a few times since).
After hunting around the net to see if it was a common problem I found this link and though I could fix it myself and bought some tork screwdrivers.
http://www.mtekk.com.au/forums/viewtopic.php?t=5380&start=0&postdays=0&postorder=asc&highlight=
I managed to open it up and thought that I had got it fixed, but it is still not working, frustratingly everthing else does but not the touch screen.
I was wondering if anyone else has opened theirs up and knows what I am doing wrong, don't want to get it fixed by a shop unless I have to as I have fixed another PDA that had a dead battery once using a Nokia battery. (Toshiba e570).
Please let me know if any other brave/foolish soul has opened theirs and taken photo's of it's guts, unsure if I need to replace membrane or just clean it off.
Thanks for reading

Cracked screen help

Hello people,
i don't know how but my screen has a small crack @ the lower left side nothing is afected by it for the exception of the use of my touch screen the alignment has changed not on whole screen only in the closest area to the crack. i tried the align screen setting & it didn't work it kept on running in a loop. What should i do until i change the screen?
thanks for your help...
its knackerd, if its insured, get a new fone, if not, wait til the newer better xda's come out cos if the screen is slightly cracked, its knackerd.
nabilaj said:
Hello people,
i don't know how but my screen has a small crack @ the lower left side nothing is afected by it for the exception of the use of my touch screen the alignment has changed not on whole screen only in the closest area to the crack. i tried the align screen setting & it didn't work it kept on running in a loop. What should i do until i change the screen?
thanks for your help...
Click to expand...
Click to collapse
I droped my XDA2s some time ago, and the screen was completely cracked and not working anymore.
I send it of to O2 to get it fixed. I also told them to fix the keyboard as it was really loose.
About one month later I got the XDA2s back with a fixed screen, but the keyboard was still loose. I did not exept the XDA, and told the shop to send it back..
One week later I got a new XDA2s with all the extra stuff that is in the box.
I now have 2 holders, batteries, pouches and more..
Only problem was that my XDA2s was unlocked (I got it in KL) The new one I got from O2 was locked.
I knew about the unlocking tool for the XDA2s, but decided to give O2 a hard time.
I called them, and told them that I got the XDA2s in KL and that it was unlocked.
I also told them that I was with Vodafone, and that the XDA2s was of no use like this for me, as my SIM did not work in it.
They told me that they could not unlock the XDA2s. I told them that I wanted my old phone back. They told me that they could also not do this.
After days of emailing with O2, I gave up, and used the XDA2s SIM-lock-remover from here... One second later the phone was unlocked
Still nice of O2 to give me a new XDA2s with all the extra's

HELP!! Artemis blank white screen and not responding :(

ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Maybe, it saw a ghost?
MaskedMarauder said:
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Click to expand...
Click to collapse
nope same blank white screen with a line in the middle.
Looks like a serious hardware death there. Did you buy it off an ebay shop or private? If from a shop you may be able to make a warranty claim, if not you'd have to post it to a repair centre and cross your fingers.
I am presuming here that you have tried a Hard Reset too, ie holding down both softkeys whilst resetting, then releasing the softkeys when you get a confirmation message.
if i press the reset button nothing happens. Orbit only responds to the power button. I bought it off ebay and hence the problem. Do you think it is only a screen malfunction and if i buy a replacement screen I should be able to solve the problem? is it easy to replace the screen by myself?
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
derooseolivier said:
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
Click to expand...
Click to collapse
Could you give me step by step instructions on flashing the xda orbit rom. Out of frusturation i tried updating the orbit to WM6 and it successfuly updated according to message on my computer screen. So i have wm6 on my phone now but still the same problem.
I exctacted the file and put it in the root of my sd card and pressed the voice button and power button. Now how do i know that the ROM is being flashed? (since i just see the white screen). Even for the orbit should i just name the file on the microsd card as ARTEIMG.nbh ?
Thanks for all your help..but since i am new to this could you please explain teh process in more simpler terms?
Thanks again
dealsoutlook said:
ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Click to expand...
Click to collapse
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
neilhhardy said:
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
Click to expand...
Click to collapse
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
If You Put Out Your Battery More Than 30 Second, It Make The Same ?? And In The Same Place???
NOW YOU HAVE NOTHING TO LOOSE... if is it the screen, you must change it...
But before, try to flash one more time your artemis with the original wm5 and, for sure, begin to make it supercid before (so you are sure you dont make a second problem !).
The client with a same problem (but not with the little trace at the right side from your screen) is happy now ! Play also a littlebit to make hardreset, softreset, usb bootloadermode ... And maybe you will see the color coming back!
I said one more time, i am not a professional for this problem but, "still trying" is never bad.... And for the screen... if you command him, you must waiting... so... try it first and if you have no more solution to try, send the pdaphone to htc... And if it's the screen, pay the replacement to htc and dont make it you self ( ebay?? are you sure 100 % the screen you buy its working???!!!??? ).
Yeah, if your computer recognises it, it'll just need a new screen.
cr0bar said:
Yeah, if your computer recognises it, it'll just need a new screen.
Click to expand...
Click to collapse
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
to dealsoutlook
i've just sent you a pm! please check
Does anyone know, where can it be send for repair to?
I have a bricked phone (even bootloader is not started).
And it was bought at eBay, so no any warranty or so.
This is XDA Orbit and I'm in Austria, where O2 has no representation.
Could you, please, advice the companies/possibilities to reapir it (chip change or direct reflashing - not via USB).
Alex
neilhhardy said:
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
Click to expand...
Click to collapse
Thanks for letting me know..i though it was a pretty simple thing to do by myself. But now I definitely dont want to take that chance. I will shop around for some local cell repair shop. But since this phone is not available in canada I dont know where to go. Does anyone know of a repair shop in Toronto?
I would think the quickest turnaround would be throught HTCamerica. Its located in Houston Tx...
http://www.america.htc.com/support/service-repairs.html
thats just my two cents, turnaround time is like 5 to 7 days after receipt... if they service your phone, they do p3300, you would have to call to find out
Hey Buddy
dealsoutlook said:
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
Click to expand...
Click to collapse
I can help u. just reply. I have gone thru such case. OK Post me and I will guide U
Cheers
This happened to mine too,and screen was not broken.Working internally but white 'screen of death' showing.Sent back to 02 but no mention of fault on return.I think rom suffers corruption since it was after x close, fix.Not sure though!

swapped lcd from o2 xda iis to sx66 white screen HELP

like sed in title i bought a sx66 from ebay which had a bad digitilazer (touch screen part) i have a bricked o2 xda iis so i was gonna put the brd form the sx66 into the o2's housing and when i power up its all white its functioning though u hear the ding fomr the click here windows main screen b4 the align screen, i checked the phone when it arrived it booted but could bypass the align screen part the touchscreen works but not correctly so it doesnt align to the point where i can move further, so now i have the good lcd with the good brd but the screen is white any ideas?? its running stock 2003 rom shipped fom cingular if it helps.
please someone help if possable or anything i can try, if its software should i try a upgrade of OS?
thanks in advance
[email protected]
u need to replace the digitizer.
..
i found out it was the lcd not the digi on the subposed good lcd w/digi so i ordered a new lcd w/digi for 95.00$ shipped, quick question, i put the good lcd with bad digi on the sx66 brds to do a upgrade to wm6, did the upgrade sucessfully, as far as i know since i cant get past the touch screen to continue but since touch isnt werking now i cant do anything i connected through actiivesync to toss sum needed cabs for future use when touch is werking, but when the unit powers on i see the colored bars with my device info at the bottom and then a blank scrren then windows starts, how do i put startup images on the phone i have a bunch just dont know where to put them, and im assuming i can goto activesync and explore and drop the files in a certin folder? or do i have to run a cab or sumthing to configure the startup screens? any info would be greatly apprecieated, also thanks for your responce, now i have a burnt o2 brd that just goto the colored bars screen like my good sx66 with bad touch, and a sx66 housing, instead of starting multiple threads ill try for a responce hear since i hijacked my own thread, any ideas on how to fix the 02 if the device info from the startup screen is needed i can provide ill toss it in the sx66 housing, or if anyone needs parts or housings i have a complete sx66 cing branded housing and one bad o2 brd which id like to fix as a backup or sell to compensate my 100 on a new lcd.
thanks in advance and sorry for my long drawn out post

transplanting camera

hi
i more or less accidentally bought a blue angel (o2 xda III) without a camera a few weeks ago. i simply didnt check if it had one. since i don't necessarily need one it is not a big deal but still it would be nice to have one.
so i thought about buying a broken BA to get the camera and back-part of the case from it and put it in mine.
so the general questen, is that possible at all? is the connector whatever i need for the camera on the mainboard though the device actually was not planed to have one?
did someone already try that? because i did not find anything via the search
do i need any extra software, especially rom (i am using sun_dreams wm6 at the moment)?
and just btw can i also use let's say a vpa3? i am not sure since the front-case looks different but the back seems to be the same...
thx in advance
fleity
Every device as HTC Blue Angel (whether S66, xdaIIs, MDA IIIor pda2k) will carry same hardware...I wonder why the previous onwer tempered the BA for ya
anyway, U need a camera with its connection strip/cable. all u need to do is the lift off the plastic metal covered mount on the camera place. and search for a bare connector on motherboard. you can follow Blue Angel Wiki to dis-assemble ur BA and find the right spot to put the camera in.
and NO, u wont need any specific software/OS update too, coz every cooked rom here comes with every driver needed to make components on BA work.
Happy Hacking. just find a broken BA with a WORKING camera and transplant it to urs
thanks a lot for the answers
i will make some photos and post some links here as soon as i got a cheap broken BA and did "the operation"

Categories

Resources