Hi
Very exited to get an almost new M700 yesterday but after several hours [now days] attempting to use HTC_Trinity_SIM_CID_Unlock_v1, I was sooooo dissapointed to find it did not work for me!!
Basicically the m700 freezes at the bootloader three colour screen when running the AUTO_Unlock_v1.bat and am not able at all to sync via activesync 4.2 after that.
Have to soft reset m700 and back to square one.. tried the procedure as described by Pof [batch file and manual] but no joy.
HELP! Any idea why this is happening what I can do? my background is in electronics engineering/ computers and it frustrates me that others seem to be able to unlock their M700 and i cannot !!!
Any advice help will be greatly appreciated.
many thanks to all.
Amedeus
Amedeus said:
Hi
Very exited to get an almost new M700 yesterday but after several hours [now days] attempting to use HTC_Trinity_SIM_CID_Unlock_v1, I was sooooo dissapointed to find it did not work for me!!
Basicically the m700 freezes at the bootloader three colour screen when running the AUTO_Unlock_v1.bat and am not able at all to sync via activesync 4.2 after that.
Have to soft reset m700 and back to square one.. tried the procedure as described by Pof [batch file and manual] but no joy.
HELP! Any idea why this is happening what I can do? my background is in electronics engineering/ computers and it frustrates me that others seem to be able to unlock their M700 and i cannot !!!
Any advice help will be greatly appreciated.
many thanks to all.
Amedeus
Click to expand...
Click to collapse
mate u missed that when ur phone come to in three colours then run updateutility after update phone well need to reset and put unlock in ur phone and run it
all should be okey
REGARDS
GSM MIND
Related
Hello, i upgraded my spv m5000 via orange site. during the upgrade the setup gave me an error and went off. and now my screen of the spv m5000 is stuck on the installation screen. i.e. saying Serial on top of the screen and V1.00 at the buttom. ive tryed resetting the phone but nothing happens.
and now my battery is dead and it only charges a bit and the same screen comes up
Ive contacted orange about a month ago now and they dont know what to do as they dont understand the issue also took to the shop no help recieved.
please tell me what i have to do to get my phone up and running.
thanks
skemeone said:
Hello, i upgraded my spv m5000 via orange site. during the upgrade the setup gave me an error and went off. and now my screen of the spv m5000 is stuck on the installation screen. i.e. saying Serial on top of the screen and V1.00 at the buttom. ive tryed resetting the phone but nothing happens.
and now my battery is dead and it only charges a bit and the same screen comes up
Ive contacted orange about a month ago now and they dont know what to do as they dont understand the issue also took to the shop no help recieved.
please tell me what i have to do to get my phone up and running.
thanks
Click to expand...
Click to collapse
try racharge you batery using external charger... than put your device to boot loader mode (serial on top & bootloader version bottom) than try to flash again
cheers
indra9110
yes its already on boot loader mode and i am unable to go off it. also i am unable to charge the battery with the external adapter.
Is there any software that can be used to flash without using active sync cause it has developed its own usb connection.
its always saying serial on top and V1.00 at the buttom
thanks for quick reply.
skemeone said:
yes its already on boot loader mode and i am unable to go off it. also i am unable to charge the battery with the external adapter.
Is there any software that can be used to flash without using active sync cause it has developed its own usb connection.
its always saying serial on top and V1.00 at the buttom
thanks for quick reply.
Click to expand...
Click to collapse
as I say ... just flashing again on bootloader mode ...
cheers
indra9110
with what software
please tell me
cheers
i have retryed my upgrade software but as i do not have active sync connection i am unable to install via software. please let me know which software you are taking about.
You dont need active sync for upgrading your ROM. When the device is in bootloader (and yours obviously is ;-), connect it to a pc through the usb cable and run the upgrade utility from the orange site again. Sometimes it takes two or three times.
hello, THANKS A LOT. YOU HAVE EXPLAINED TO ME EVERYTHING THAT EVEN THE COMPANY ORANGE COULD NOT DO..,
Your da true expert in this device.
Thank you every much.
all of you that have reply thank you very much
hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
I think your battery is given up or you have bad connection so that you dont get enough power.
Try first to clean the battery and device connections(best to use contact spray for PCB boards) if doesnt help then you need to have new battery
Thanks for your reply.
I just got it back 2 weeks ago and they installed a new board in it... i made them send it back and fix it (i blamed them)
they also putted french rom and AZERTY keyboard in it so they can fix that to (i had englis OS and Qwerty).
Thx for your post, i appreciate it!
Restarting Problem - PLEASE HELP!!!
Hi
I have an Orange SPV m5000 that I rely on for to carry my contact address book and send text messages (I know other phones would do it but I really like my Uni).
Recently mine has decided that it's going restart itself every few seconds. I have no idea why it's doing this, but the shop I bought it from are not helping me at all.
I've hard reset the device and that hasn't worked so if anyone has any ideas then please let me know, or if you know of anywhere I can send it to be repaired (I'm in the UK).
Thanks in advance
Nick
Hello all, I have been experimenting with WM6 roms. Unfortunately, the last one I attempted to flash, was the Autrailian version for the Dopod. It screwed up my phone. All I have now is the red, green and blue bars with some info. I tried everything, soft and hard reset, remove battery, etc. I cannot escape this screen.
TRIN100
1PL-1.00
SPL-9.99.CP
The problem is that I cannot connect to active sync any more to reflash. It wont let me. I am hoping there is a solution and any help would be greatly appreciated.
Thank you in advance.
Palermitano said:
Hello all, I have been experimenting with WM6 roms. Unfortunately, the last one I attempted to flash, was the Autrailian version for the Dopod. It screwed up my phone. All I have now is the red, green and blue bars with some info. I tried everything, soft and hard reset, remove battery, etc. I cannot escape this screen.
TRIN100
1PL-1.00
SPL-9.99.CP
The problem is that I cannot connect to active sync any more to reflash. It wont let me. I am hoping there is a solution and any help would be greatly appreciated.
Thank you in advance.
Click to expand...
Click to collapse
Usually U don't need activesync for ROM flashing...
By the way, to recover your situation I read somewhere that U have to flash an original WM5 ROM from HTC before try to flash any WM6 cooked ROM.
Try also to read here ... http://forum.xda-developers.com/showthread.php?t=308691
Palermitano said:
TRIN100
1PL-1.00
SPL-9.99.CP
Click to expand...
Click to collapse
This is hard-SPL from des.
You should be able to flash almost anything by just connecting your phone and launching an update from windows xp...
edit : as Stratos74 said, you don't need active sync at all. To know il your phone is connected, juste verify that there is "USB" written on screen instead of "Serial".
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hey guys.
Im trying to upgrade my O2 Atom life from WM 5 to the latest O2 official 6.5 WM ROM.
When i tried updating normally by connecting my phone to computer and running the rom setup... my upgrade process gets stuck at Stage 4 with 0%.
If i put my phone in bootloader screen and then upgrade, i get Customer and model ID error.
After reading this forum I tried changing Pass.32 file properties from WWE to CHT and still i get the same customer and model ID error.
I even tried uploading those two files al1.dio and ext rom to a mini sd and upgrade through bootloader that doesn't seem to work either.
Can someone please guide me what else can be done step by step.
Thanks alot in advance for helping.
Ps - im using latest Windows Device center with windows vista.
hey
hey guys... please help... my WM5 keeps shuttin off by itself... really need to upgrade. thanks.
hey
hey guys... any help would be appreciated.... my phone turns off on its own and then when i click power on.. it goes straight to DSUU white screen and has to be factory reset so can't really deal with it.. please help upgrading would help.
Have you read here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Atom
Hope it helps and good luck,
hey
hey sorry. yeh i have read that page... nothing helps me there... ok so i got my phone upgraded somehow to the latest 6.5.... but i'm facing same problem.. whenever phone turns off or restarts it goes straight to DSUU white screen.. and the only way to come out of it is by ressetting the phone to factory by pressing record + power button n pressing the hole.... to restart.
not sure whats wrong with it.
Have you asked on atom section?
perhaps there you can have more chances
hey
hey.
yeh i will post it there as well... people don't really respond nowadays!