Hey guys.
Im trying to upgrade my O2 Atom life from WM 5 to the latest O2 official 6.5 WM ROM.
When i tried updating normally by connecting my phone to computer and running the rom setup... my upgrade process gets stuck at Stage 4 with 0%.
If i put my phone in bootloader screen and then upgrade, i get Customer and model ID error.
After reading this forum I tried changing Pass.32 file properties from WWE to CHT and still i get the same customer and model ID error.
I even tried uploading those two files al1.dio and ext rom to a mini sd and upgrade through bootloader that doesn't seem to work either.
Can someone please guide me what else can be done step by step.
Thanks alot in advance for helping.
Ps - im using latest Windows Device center with windows vista.
hey
hey guys... please help... my WM5 keeps shuttin off by itself... really need to upgrade. thanks.
hey
hey guys... any help would be appreciated.... my phone turns off on its own and then when i click power on.. it goes straight to DSUU white screen and has to be factory reset so can't really deal with it.. please help upgrading would help.
Have you read here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Atom
Hope it helps and good luck,
hey
hey sorry. yeh i have read that page... nothing helps me there... ok so i got my phone upgraded somehow to the latest 6.5.... but i'm facing same problem.. whenever phone turns off or restarts it goes straight to DSUU white screen.. and the only way to come out of it is by ressetting the phone to factory by pressing record + power button n pressing the hole.... to restart.
not sure whats wrong with it.
Have you asked on atom section?
perhaps there you can have more chances
hey
hey.
yeh i will post it there as well... people don't really respond nowadays!
Related
hello everyone;
I need urgent help with my Dell Axim x50v. I was trying to upgrate to WM5 A03 ROM and everything went as stated in the original thread but after doing a hard reset i dosent want to come back up. Is there any way it can be fixed. I was using this AXIm as a GPS and now really need to get this back up and running. I am a student and cannot afford to buy a new PDA.
Any help will be greatly appreciated.
shazi201 said:
hello everyone;
I need urgent help with my Dell Axim x50v. I was trying to upgrate to WM5 A03 ROM and everything went as stated in the original thread but after doing a hard reset i dosent want to come back up. Is there any way it can be fixed. I was using this AXIm as a GPS and now really need to get this back up and running. I am a student and cannot afford to buy a new PDA.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
I take it you are using (or have access to) Windows XP? If so, try rolling back to WM2003SE using this Dell utility: http://ftp.us.dell.com/utility/R115117.EXE
You can then stick with WM2003SE or try upgrading again to WM5 A03 (by following the directions from the beginning for upgrading to WM5 A03). For the future, never try flashing your device unless you have a "plan of escape" *BEFORE* you begin flashing incase something goes wrong.
Thanks Cavyman for the quick response. yes i do have XP but my X50v dosent come up at all. The only time the power light comes on is when i place it in the cradle. Otherwise it is brick. not even the power light comes on. the utility i downloaded also continues to say please connect the device.
shazi201 said:
Thanks Cavyman for the quick response. yes i do have XP but my X50v dosent come up at all. The only time the power light comes on is when i place it in the cradle. Otherwise it is brick. not even the power light comes on. the utility i downloaded also continues to say please connect the device.
Click to expand...
Click to collapse
If you do the SD Image Loader button combination, can you get to the SD Image Loader?
Hi, Sorry, I know a lot of you guys are guru's on here but just need a little help. I have an unlocked T mobile mda which I am running on at&t.It has the 2.26 rom at present.I tried to install WM6 from here http://forum.xda-developers.com/showthread.php?t=324632 last night. Everything was going fine until the download reached 99%. Then it just hung for a while then gave me an error message '302'..From then on all I could get on the phone was the boot screen. I tried several times in boot mode to install again but same thing every time. I thought I had bricked my phone !
This morning I downloaded the 'lite' version from the same page and installed and hey presto, we are back to normal.
I don't know if WM6 is downloaded or not. I do get a different screen as it boots up now though..Firstly i get a screen with 'htc technology' written on it and then I get a screen with like a car speedometer with xda mobile 6 showing. Then it just comes on as normal......I don't know, All I really wanted was the 'touchflo' installed which I thought came with WM6...
Any info would be much appreciated,
Thanks, Paul
Hi
Yes You download the new version. There are more different roms maybe you download wrong rom to your device. İf you download rom with no error message I think you download wm6 rom and you should make hard reset for your device than I think it will be ok soon
Thanks for the reply...
I just did a hard reset and it's just the same as before.....any ideas ??
" 'touchflo' installed which I thought came with WM6..."
it dont
but if the top and buttom bars are not glossy
and the device info in
settings dont say the correct version you dont have wm6
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.