Hello all, I have been experimenting with WM6 roms. Unfortunately, the last one I attempted to flash, was the Autrailian version for the Dopod. It screwed up my phone. All I have now is the red, green and blue bars with some info. I tried everything, soft and hard reset, remove battery, etc. I cannot escape this screen.
TRIN100
1PL-1.00
SPL-9.99.CP
The problem is that I cannot connect to active sync any more to reflash. It wont let me. I am hoping there is a solution and any help would be greatly appreciated.
Thank you in advance.
Palermitano said:
Hello all, I have been experimenting with WM6 roms. Unfortunately, the last one I attempted to flash, was the Autrailian version for the Dopod. It screwed up my phone. All I have now is the red, green and blue bars with some info. I tried everything, soft and hard reset, remove battery, etc. I cannot escape this screen.
TRIN100
1PL-1.00
SPL-9.99.CP
The problem is that I cannot connect to active sync any more to reflash. It wont let me. I am hoping there is a solution and any help would be greatly appreciated.
Thank you in advance.
Click to expand...
Click to collapse
Usually U don't need activesync for ROM flashing...
By the way, to recover your situation I read somewhere that U have to flash an original WM5 ROM from HTC before try to flash any WM6 cooked ROM.
Try also to read here ... http://forum.xda-developers.com/showthread.php?t=308691
Palermitano said:
TRIN100
1PL-1.00
SPL-9.99.CP
Click to expand...
Click to collapse
This is hard-SPL from des.
You should be able to flash almost anything by just connecting your phone and launching an update from windows xp...
edit : as Stratos74 said, you don't need active sync at all. To know il your phone is connected, juste verify that there is "USB" written on screen instead of "Serial".
Related
Currently i have Black Shadow installed, i wanted to upgrade to Majik and ran the program. I followed the direction (force using sspl, checked everything in order) so i basically did the same as when i upgraded to Shadow. My phone goes to tri color screen and then my active sync disconnects. After the message "Verifying the information on your Hermes...Please wait..." I get this Error 260 saying i can't connect to the phone. Then this error from Microsoft.NET framework comes up as well. I got scared so i reseted the phone and it booted and it still works as a phone and PDA. Now am i stuck with this OS? Is there a way to fix this? Is this bricking? Please help.....
The funny thing is, when it got stuck on the tri color screen from upgrading, it shows SPL-1.09.ds. But when i press power, ok then soft reset, it shows SPL-1.11. Is this normal?
jhego said:
The funny thing is, when it got stuck on the tri color screen from upgrading, it shows SPL-1.09.ds. But when i press power, ok then soft reset, it shows SPL-1.11. Is this normal?
Click to expand...
Click to collapse
Yes it is normal, cause when you have tried to install MAJIK you have forced SSPL (SPL-1.09.ds) and the RUU pushed the SSPL to your phone...but you have the SPL-1.11 installed...SSPL by-passe your SPL when forcing SSPL to install new ROM, Radio ROM,....
Regards,
Primoz
Oh ok thanks for clearing that up. But what about the main issue? Is there a way to fix it?
It could be an .NET error...try to install the .NET again...or just flash the ROM from your SD card...if you have a chance try on another comp....
Regards,
Primoz
Pc78 said:
It could be an .NET error...try to install the .NET again...or just flash the ROM from your SD card...if you have a chance try on another comp....
Regards,
Primoz
Click to expand...
Click to collapse
if he has SPL 1.11 you cannot flash unsigned updates... you need to install HardSPL v7.. read that here
Thanks for the tip...now I know sth new
Regards,
Primoz
on the bricking topic... i upgraded my 8525 to Black Majik ROM. Made a couple of calls and began customizing. i loaded core player and i forgot to change my name for the reg and the device locked. i went to soft reset and now it goes to the AT&T splash screen. now i can't get the unit past this. tried taking battery out...
any advice?
Try to hard reset your device...
Regards,
Primoz
Brick fix
The same happend to me, I went to 90% upgrade and did brick, BEST thing to to is FLASH FROM THE CARD It did work for me... http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Thanks. just going to hard reset.
walshieau said:
if he has SPL 1.11 you cannot flash unsigned updates... you need to install HardSPL v7.. read that here
Click to expand...
Click to collapse
See i tried that as well and it's the same result. As far as the .NET, should i upgrade the computer's? or the mobile?
Hmm, it says i already have /NET installed. How about the bootloader. Since i have 1.11, do i have to choose SPL-1.11 as the bootloader as well? I did the auto detect and it chose Force using SPL.
Nevermind, i just did the Hard-SPL-V7 and it worked I wonder why it took me several times to make it work???
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Go back to your Original WM5 Rom First. Then flash again using SSPL-Trin.exe
Atoo509 said:
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Click to expand...
Click to collapse
Atoo509 said:
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Click to expand...
Click to collapse
You should feel the need.......
the need to read.....
This one is so heavily documented in this forum - it's resolution should be straightforward. Just read...
nealed said:
You should feel the need.......the need to read.....
Just read...
Click to expand...
Click to collapse
Seems to be more difficult then asking question !! Too bad
to nealed
Cheers mate,
Well tried to flash WM5 ROM (Original that was on my 810 prior to cooked ROM) however it still comes up with the data connection error and can't find my Dopod. Maybe all the information is too much in the forum cause I have read all my friend. I would absolutely love you to simplify it a bit for an honest and humble noob that would be great......
Nothing flashes cause im stuck in the tri colur screen.
Please educate me
give some more details of what's displayed on tri colored screen..
next time it gives connection error, just restart the updater (with device still connected).
Racerx
You have provided me with the most honest feedback and I thankyou. It would now appread that the original ROM WM5 1.23.707.6 for AUS was not able to flash on VISTA however I just started it on XP so finger crossed.
Now when its all good, lol, I need to re-read what needs to be done with the new WM6 update prior to flashing it. Can you give me your clear guidance.... SSPL or HardSPL?
waiting with baited breath.....
ok, if you have any more trouble, it's hard to assess where you're stuck without the details of what's shown on your screen, etc.
to flash WM6 ROM, please follow the instructions at my site here
this will give you basic instructions on flashing it. once you get ready to flash the ROM, you can look at the upgrade guide on the site for picture by picture steps to upgrade.. hope it helps
Hi, i have just bought a new imate jasjam and uploaded the windows mobile 6 as per your instructions. Everything was going ok, then active sync kept stuffing up, i reinstalled it 3 times and only sometimes works, i have limited to no connectivity in my LAN, and my imate takes 2hrs to do anything once i touch the screen. i have tried hard resetting etc nothing! i have searched and searched for everything and found nothing, i eally hope someone can help me, i am at my wits end!
PLEASE HELPPPPPPPPPPPPPPP
Try putting it into bootloader and flashing hard spl and flash a new rom after that.
thank you!
i just tried to do that and it said error please connect the usb to the phone etc..and it is..
if this helps anyone- ipl 1.04 and spl.2.10.0lipro?
ggrrrr
Can you tell us what ROM you are trying to flash, and what OS you are using to connect with?
ROM VERSION: 3.30.2.1
ROM DATE: 05/15/07
RADIO:1.38.30.10
PROTOCOL:32.71.7020.12H
I have a windows xp sp2
i am so grateful to everyones input. thanks
usb connectivityy
Goto to the usb settings under communication and remove the tick from advanced usb fuctionality. Maybe unplug from USB first before doing that.
Thanks, have just tried that but it didnt work, still got the red cross on the icon and limited to no connectivity thru the LAN. i am so lost, i should have just left the phone as is ;-(
have you tried loading into the bootloader and then connecting the jasjam to your pc?
How to get into the bootloader is described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
once connected just run the offical update from telstra (which is a damn good rom btw) and it should return your jasjam to normal. The latest Offical update can be found here - http://forum.xda-developers.com/showthread.php?t=348436&highlight=telstra
hope that helps
edit; should have read first post. hmmm. try uninstalling activesync and reinstalling it, or try on another computer. i had this problem awhile ago, can't remember exactly how i fixed it, but it was a combination of new activesync, bootloader and hardresetting
ok, i have reset it- is the bootloader screen the one with 3 colours with ipl etc on it?
i connected it and it then said usb on the screen, but activesync can't connect it?
When you get to the bootloader screen with the 3 colors you need to reflash with a new ROM
thanks to everyone, i am now back and running! god knows hoe but thanks!
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
You can do thAT, on this way
Plug the USB cable to connect your Diamond with PC, make sure ActiveSync connected.
Copy "SSPL-Manual.exe" to Internal Storage on your Diamond.
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable. Your Diamond screen will turn "BLACK" and ActiveSync will disconnect. *This is normal behavior***
Execute the ROMUpdateUtility.exe.
Your Diamond will automatically restart when finished.
To make sure stock SPL has been flashed back, press and hold "Vol-" key and use stylus to press reset once. until you see the tricolor screen and if you can see version of spl which before you flashed, it's ok!
Greetz
sucro said:
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable.
Click to expand...
Click to collapse
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
when i want to install the original htc rom after received the upgrade present to 100 this error message appear .for this aim i need to downgrade my spl to stock. . is there any manual or howto link and also original spl files please link it. i have been searching for a while.
my stock spl was 1.93.
any help would be appreciated.
masa1977 said:
is there any manual or howto link and also original spl files please link it.
Click to expand...
Click to collapse
It's in the HardSPL Developer Edition Thread.
thanks a lot slow23
slow23 said:
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
Click to expand...
Click to collapse
You are welcome, try this, i discover this combination of buttons
ENTER+VOL UP = ALIGN SCREEN
that means, with this combinations of buttons, you can directly enter ALIGN SCREEN options, and try to align screen , sometimes this helped me, cause my touch screen has same problem, it start to freeze randomly, i don't know why, sometimes in right, sometimes in left corner, up-down, randomly, i noticed that htc diamond when is exposed , when i'm out and it's sunny weather, it stop to responding on touch, one my friend specialist for mobiles, tell me, maybe this happen, cause bellow screen in some pda is some thin rubber, and from heat it start to expand, and that cause problems, maybe this situation is in htc diamond...
greetz and good luck
Returning to Stock SPL
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
Hi
I have similar problem and I will tell you what I did to get back to Stock SPL.
1. Flash the BSBs latest ROM from this thread, http://forum.xda-developers.com/showthread.php?t=506533 . Either by RUU or moving the diaming.nbh to the storage, this ROM does not require allignment or any other input.
2. Install My Mobiler from http://mymobiler.com in your computer, where you can see your mobile screen in your computer and operate using your mouse.
3. Then return to the stock SPL as given in this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39.
4. Flash your ROM again from the HTC. This can be done once the system connects to the phone.
I am successful in doing the above.
Regards,
V.Balaji
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.