Develop Bugs

What next - HELP needed from the best guys?

Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????

Go back to your Original WM5 Rom First. Then flash again using SSPL-Trin.exe
Atoo509 said:
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Click to expand...
Click to collapse

Atoo509 said:
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Click to expand...
Click to collapse
You should feel the need.......
the need to read.....
This one is so heavily documented in this forum - it's resolution should be straightforward. Just read...

nealed said:
You should feel the need.......the need to read.....
Just read...
Click to expand...
Click to collapse
Seems to be more difficult then asking question !! Too bad

to nealed
Cheers mate,
Well tried to flash WM5 ROM (Original that was on my 810 prior to cooked ROM) however it still comes up with the data connection error and can't find my Dopod. Maybe all the information is too much in the forum cause I have read all my friend. I would absolutely love you to simplify it a bit for an honest and humble noob that would be great......
Nothing flashes cause im stuck in the tri colur screen.
Please educate me

give some more details of what's displayed on tri colored screen..
next time it gives connection error, just restart the updater (with device still connected).

Racerx
You have provided me with the most honest feedback and I thankyou. It would now appread that the original ROM WM5 1.23.707.6 for AUS was not able to flash on VISTA however I just started it on XP so finger crossed.
Now when its all good, lol, I need to re-read what needs to be done with the new WM6 update prior to flashing it. Can you give me your clear guidance.... SSPL or HardSPL?
waiting with baited breath.....

ok, if you have any more trouble, it's hard to assess where you're stuck without the details of what's shown on your screen, etc.
to flash WM6 ROM, please follow the instructions at my site here
this will give you basic instructions on flashing it. once you get ready to flash the ROM, you can look at the upgrade guide on the site for picture by picture steps to upgrade.. hope it helps

Don't say I bricked it...

I have Dhva_ddt V20 installed....
I tried to install omnia slm/touch player...During installation it got hanged...
I did soft reset but after reset it got hanged on splash screen...
After that i tried to falsh new rom by SD card method.. but not sucessful..
It shows IPL / SPL and "serial" at bottom on bootloader...
I tried to connect it to pC here it shows USB at bootom at bootloader but gives an error..."Use new version of RUU"... don't know what to do?
I am trieng from two days and read a lot but noting help...

alex8525 said:
I have Dhva_ddt V20 installed....
I tried to install omnia slm/touch player...During installation it got hanged...
I did soft reset but after reset it got hanged on splash screen...
After that i tried to falsh new rom by SD card method.. but not sucessful..
It shows IPL / SPL and "serial" at bottom on bootloader...
I tried to connect it to pC here it shows USB at bootom at bootloader but gives an error..."Use new version of RUU"... don't know what to do?
I am trieng from two days and read a lot but noting help...
Click to expand...
Click to collapse
downloaded the newest hardspl and flash that, if that doesn't work download the newest shipped from for your phone from the wiki.
here is hardSPL
and here are the shipped roms
or official AT&T rom with radio stripped out (safer)

Tried ATT rom..But it didn't work

alex8525 said:
Tried ATT rom..But it didn't work
Click to expand...
Click to collapse
Then try your official rom. (I put the custom RRU with the striped one).
Should work. If you can get into bootloader tisnt a perma brick.

also see this thread here, looks like the guy solved a problem like yours

alex8525 said:
Tried ATT rom..But it didn't work
Click to expand...
Click to collapse
Try flashing with SD card! Read through wiki to figure out how to flash through SD card.

I have tried SD card method...
But it shows bootloader with IPL / SPL version and "Serial" at bottom...
It dose't load any thing...
I have tried installing ATT official rom also.. but it says use updeted utility to flash....
I am able to go to bootloader and get USB connection when connect to PC....
But I don't have Activesync installe on PC is it a problem??? and I can't install active sync because of some restriction....
How to come out of this?
Is there any way I can Hard reset phone? Without switch on it?
Please help ...M scared....

I have done hard reset and now I m stuck at white screen .....
Is it bricked?

alex8525 said:
I have done hard reset and now I m stuck at white screen .....
Is it bricked?
Click to expand...
Click to collapse
ok, can you get into boot loader, press ok on left, and power on on right, and stick your stylus at the bottom, all together. Plug USB to PC, with boot loader screen, download the ATT rom mentioned here, and start the process. You have to have activesync 4.5 and .net 2.0 on your PC to have this to work.
Also, you have been given a link above for the official ATT without Radio, and here is the exact instructions on how to flash via SD. what part of any of these do you not understand?

Why would you perform a hard reset right after asking about it and not even waiting for an answer? If you had any doubts you should have just waited. I don't know much about your problem but I would't be taking the chance of doing something I wasn't sure about thats for sure. I really hope you can get out of this mess.

what size micro sd have u got. if it is larger than 2 or its a sdhc than you will not be able to flash sd method.
download another recent rom or just reflash the same dvha rom and do it through active sync on pc.

Finally got it working...
After 3 hard reset now I am out of white screen and now its working.
After 3 days
1. on splash screen
2. on bootloader
3. on white screen
Thank you everyone who have replied and who have atleast viewed.
learning:
Activesync is must for flashin through PC
new way to hard reset (thx wiki)
don't panic...your phone will be working sooner or later, if it was not a flshing that hanged it.
by d way i am posting from phone

alex8525 said:
Finally got it working...
After 3 hard reset now I am out of white screen and now its working.
After 3 days
1. on splash screen
2. on bootloader
3. on white screen
Thank you everyone who have replied and who have atleast viewed.
learning:
Activesync is must for flashin through PC
new way to hard reset (thx wiki)
don't panic...your phone will be working sooner or later, if it was not a flshing that hanged it.
by d way i am posting from phone
Click to expand...
Click to collapse
Glad to here you fixed it!

Big problem with the spl, I need seriously help with this

Currently My diamond has the olinex 1.40 unsigned hard-spl. I've to ship it back and try to flash to a stock spl. After flashing to 1.34 the original spl it still says the olinex 1.40 version is on it. What is odd is that the when I start the bat file to go to the bootloader he doesn't response to it, but it will go to the bootloader when i start the flash. I can't start manuely with spl bootloader. Because my touchscreen layer doesn't work at all i'm stuck in the screen calibrate menu. So why doesn't it says 1.34 after flashing it to 100 %.
The phone will be picked up this week but can't send it back like this.
I've read different topics complete but nobody seems to have the same problem.

Just tried stock spl 1.93 and get the same result.
O the bat file didn't work out. So I did a volume down + reset and it just gets to 100% with flashing. but it's keep saying 1.40 olinex. Is it good to do it this way, not that it help but still?
It seems that flashing the hard spl can't be done. So any tips?

Codeaction said:
Just tried stock spl 1.93 and get the same result.
O the bat file didn't work out. So I did a volume down + reset and it just gets to 100% with flashing. but it's keep saying 1.40 olinex. Is it good to do it this way, not that it help but still?
It seems that flashing the hard spl can't be done. So any tips?
Click to expand...
Click to collapse
Did u try with jump SPL and then flash with HardSPL 1.93 or so. Try that. It should work.

Did try it with 1.34 but will now try with 1.93.

ksekhar said:
Did u try with jump SPL and then flash with HardSPL 1.93 or so. Try that. It should work.
Click to expand...
Click to collapse
Thanks for the reply
it should work indeed but still doesn't. Before this I never had any problems with it, but again after flashing it keep saying 1.40Olinex even with the jumpspl.
Now something else

helo
to change the spl ..
to hard or stock spl
you must flash this with diamond conected to pc....
you can´t flash you device fron 3 color bars
try to conect your device to pc (power up you device, and when it says to calibrate your screen conect your device to pc)
if you want more advice pm me

Does anyone at least knows how to ignore the first "touch the device message screen" and screen settings so I can flash with the manual sspl boot exe

Codeaction said:
Does anyone at least knows how to ignore the first "touch the device message screen" and screen settings so I can flash with the manual sspl boot exe
Click to expand...
Click to collapse
U dont need to use touch screen to go to bootloader mode.
press soft reset with stylus and press volume down button. You should be in bootloader screen.
Try flashing with hardspl again....

ksekhar said:
U dont need to use touch screen to go to bootloader mode.
press soft reset with stylus and press volume down button. You should be in bootloader screen.
Try flashing with hardspl again....
Click to expand...
Click to collapse
That's true, but the thing with it, it doesn't work to flash the spl. When I flash like that is will not chance the spl.

Is there a way to flash the spl without using the sspl-manuel.exe ?

Come on people, it will be picked up tomorow.
Is there a way to update the spl if the automatic mode doesn't work and the sspl-manuel can't be opent because i'm stuck at the press screen message. So is it posible to open the sspl without the obove options.

I have the same problem. Solution is next. Put file named welcome.not in the root directory of Diamond. This file must be clear - 0 bytes. Then softreset it. After SR you will not see calibration message. And will be able to spl your device. Good luck!

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

HTC Diamond bricked?

i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me

If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!

hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?

Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor

when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again

flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?

mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck

i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?

after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)

Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1

flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S

If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!

I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !

Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.

did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??

If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.

it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now

worked, 5 minutes into winmo it restarts

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!