Develop Bugs

dead phone flash

hi there ... i was trying to update to WM6 but something went wrong and my phone is now dead.
It stuck to a color screen with 4 rows of text.
It says:
---------
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
---------
That's all ... how can i "wake it up".
Please ... any help will be very appreciated!

I'm assuming you've tried to soft reset it?
What happens when you try to reflash something?
please try to flash hard spl
you can follow the guide herehttp://trinityguides.info/index.php?option=content&task=view&id=21​
if that doesn't work, use splxploit
you can follow the guide herehttp://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=60http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=60​
make sure you have hard spl installed before you flash next time.

osavioro said:
hi there ... i was trying to update to WM6 but something went wrong and my phone is now dead.
It stuck to a color screen with 4 rows of text.
It says:
---------
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
---------
That's all ... how can i "wake it up".
Please ... any help will be very appreciated!
Click to expand...
Click to collapse
Try to flash the orriginal WM5 rom.

Thank both of you for the answers. I tried hard spl and xplot but nothing really happened. Then i realize that i can find original rom and reflash it ... it is ok now.
I've have the device for only 2 days and i crashed it ... it was scary
I think i'm gonna wait for the official htc release of WM6.

osavioro said:
Thank both of you for the answers. I tried hard spl and xplot but nothing really happened. Then i realize that i can find original rom and reflash it ... it is ok now.
I've have the device for only 2 days and i crashed it ... it was scary
I think i'm gonna wait for the official htc release of WM6.
Click to expand...
Click to collapse
If you actually read and follow directions it is very simple.
Hard Spl > Radio (If Needed) > ROM
I wish I had Racerx's guide when I first started.

Moving from O2 WM6 to BB v 4

Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd

yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.

Thanks for that. Time to give it a whirl! Wish me luck!!

Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.

Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd

I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either

Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.

The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F

question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.

Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F

Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!

Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!

Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.

SPL is 1.25.0000
IPL is 1.25.0001
Ideas??

The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.

Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??

Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.

OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??

fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.

I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.

Please Help! Upgrade ROM code error...

Hi, hoping someone can help.
Getting the following. Can't get past it. Also what does the Diam100 stand for as I notice others have different.
A tri-colored screen that reads as follows:
Diam100 64M
SPL-1.37.0000
MicroP-Diam (LED) v.11
-----------------------
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
Thanks for you help!

1: state the subject in the thread title, that's what it's for
2: search is your best friend; the issue you mention has been discussed in several threads
3: I'd recommend: get into bootloader mode (seems like you can); install hardSPL again, flash again with any ROM supported by hardspl.
4: insert [solved] in front of your thread title.
5: this is NOT a relevant subject for this forum (it's got nothing to do with rom development)

apologies, im new to this (only got the diamond today) and havent been able to use it yet and this forum was the closest thing i could find to getting it working.
Im unable to enter bootloader mode (volume down, reset?)
Also can't get my diamond to connect to pc and keep getting connection errors when trying to install Hard-SPL?
Thanks, your help is appreciated.

The tricolor screen IS bootloader mode.
Just run the HardSPL, then Rom upgrade utility from a rom, and that's it.
IF you got it in this state, you'd probably want to return it (you got warranty?)

Thanks for your help.
Is HardSPL going to install even though ActiveSync isn't recognising the device (ie not connected). When i run it it seems to work and then a grey screen with 0% shows. Then the install program comes back with a 'connection problem' message,i go through all the steps but just keeps happening. I read posts on this earlier today but it seems the install program is fixed and shouldnt do it any more????

...also ive done all the firewall changes to make sure it connects etc etc. Forgive me if im not doing something that has been posted already, but i couldnt find it.
Thanks.

I had the same problem make sure you install the HARD SPL but the unsigned version not the sign version.....it should work them.....

i think there's two issues people are describing here..
1) installing hard spl.. if you get the 0% error, then you need to follow the instructions in the thread and manually run SSPL from your phone and then start the RUU
2) if you keep getting errors while trying to install your rom AFTER installing hard-spl, then you probably are flashing an unsigned ROM on the signed hard-spl.. go to the sticky thread and download a signed version of the ROM you want..

Thanks guys. I dont see how i can do the manual install, as it requires me to copy a file onto the diamond and at this stage i cant even get activesync to connect to it. I dont beleive its a problem with activesync or the pc as ive tried many many things, but rather that the diamond isnt communicating properly.
Also i havent even got to installing the new ROM yet as i cant get past HARDSPL install.
Do you think installing the un-signed HARDSPL version will work? as in will it install when the signed version won't?
all your help is very much appreciated. I cant wait to actually turn my phone on for the first time!

you haven't turned it on yet
is that right?
you have not had it working yet?
or have you tried to update it even before using the phone???????

yeh unfortunatley thats right, yet to turn it on. hopefully will have it up and running shortly...

1) can you confirm exactly what happened to get you stuck in the bootloader screen? (it usually doesn't just happen by itself)
2) Have you tried to soft reset to get your device out of bootloader?
3) are you flashing in win xp or vista?
4) are you connected through a usb hub?

yes, tried soft rest but it just returns to bootloader screen.
using winXP SP3. Not using a USB hub. have tried different ports.
Have tried the signed and unsigned versions of HardSPL.
I keep getting to the 0% grey screen and then the communication error 262.
Maybe i should try and just flash the original ROM? Does anyone know where I can download it from and the HTC e-club doesnt have it? Or is this not the next step???
Thanks!

yeah try the original ROM..
but still i don't understand how you got to this point.. what were you trying to flash when it got stuck in bootloader?

I bought the phone like this.
Do you know where i can get the original ROM from? I tried e-club (both worldwide and SEA) no luck.
Appreciate your help on this.

?? that's quite strange... is there any reason why you're not just returning it for a new set?

try this thread for SEA ROM

I bought it whilst overseas last week in SEA. Im now back in australia and would like to try my best to fix it before going down the long and difficult warranty path.
Do you think its buggered? Or the fact that its in the bootloader screen and giving me this message quite common on failed ROM updates?
Do you think an orginal ROM install will fix it? if so where can i get it from?
Thank you.

well that's what i'm asking..
you got this screen when you pulled it out of the box, or tried to update the ROM and then hung on this screen. also, if you did try an update, was it a SEA update, or australian ROM
i wouldn't say its a common issue.. i also don't think your device is bricked, since its showing bootloader.. diamond is relatively new so i don't really know a lot about getting it out of this state.
trying to load original ROM is a good option.. one thing is for sure, before any further flashes (after you get out of this mess) you want hard-spl on your device.
If flashing original ROM doesn't work, i'd suggest PM'ing walshieau, olipro, or pof as they know a lot more about this type of stuff.. do post your results

Thanks for the link above. i'll give it a go. is it different from the one in the ROM list??

Returning to Stock SPL (With a twist)

Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.

slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
You can do thAT, on this way
Plug the USB cable to connect your Diamond with PC, make sure ActiveSync connected.
Copy "SSPL-Manual.exe" to Internal Storage on your Diamond.
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable. Your Diamond screen will turn "BLACK" and ActiveSync will disconnect. *This is normal behavior***
Execute the ROMUpdateUtility.exe.
Your Diamond will automatically restart when finished.
To make sure stock SPL has been flashed back, press and hold "Vol-" key and use stylus to press reset once. until you see the tricolor screen and if you can see version of spl which before you flashed, it's ok!
Greetz

sucro said:
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable.
Click to expand...
Click to collapse
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...

when i want to install the original htc rom after received the upgrade present to 100 this error message appear .for this aim i need to downgrade my spl to stock. . is there any manual or howto link and also original spl files please link it. i have been searching for a while.
my stock spl was 1.93.
any help would be appreciated.

masa1977 said:
is there any manual or howto link and also original spl files please link it.
Click to expand...
Click to collapse
It's in the HardSPL Developer Edition Thread.

thanks a lot slow23

slow23 said:
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
Click to expand...
Click to collapse
You are welcome, try this, i discover this combination of buttons
ENTER+VOL UP = ALIGN SCREEN
that means, with this combinations of buttons, you can directly enter ALIGN SCREEN options, and try to align screen , sometimes this helped me, cause my touch screen has same problem, it start to freeze randomly, i don't know why, sometimes in right, sometimes in left corner, up-down, randomly, i noticed that htc diamond when is exposed , when i'm out and it's sunny weather, it stop to responding on touch, one my friend specialist for mobiles, tell me, maybe this happen, cause bellow screen in some pda is some thin rubber, and from heat it start to expand, and that cause problems, maybe this situation is in htc diamond...
greetz and good luck

Returning to Stock SPL
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
Hi
I have similar problem and I will tell you what I did to get back to Stock SPL.
1. Flash the BSBs latest ROM from this thread, http://forum.xda-developers.com/showthread.php?t=506533 . Either by RUU or moving the diaming.nbh to the storage, this ROM does not require allignment or any other input.
2. Install My Mobiler from http://mymobiler.com in your computer, where you can see your mobile screen in your computer and operate using your mouse.
3. Then return to the stock SPL as given in this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39.
4. Flash your ROM again from the HTC. This can be done once the system connects to the phone.
I am successful in doing the above.
Regards,
V.Balaji

Problems updating rom...

Hey people!
I think I have a little prob. I've been trying to put a new ROM on my diamond and so I have been reading all kinds of stuff before taking any action. I've done it before, but have seen that Win 7 x64 might give some probs and so I've done the mtty steps on showthread.php?t=540290
: FLASHING YOUR ROM FROM INTERNAL STORAGE AFTER MTTY
After doing those steps my diamond only shows the normal startup screen (black background with TOUCH DIAMOND) and doesn't boot on.
Now I have the feeling that I have a wrong version of SPL installed:
DIAM110 64M
SPL-2.03.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x032
If so is there anything I can do or did I just brick my diamond?...
Thanks for your advise in advance!
Greetings Aussie

you didnt brick your phone as long as it shows a boot screen and you have a hard spl installed and can get back to the bootloader you are fine
i cant help with much, im having my own problems xD

From the looks of it, you did not successfully install a HardSPL. Search the forum to find one and install it. I use Olinex myself.

_RooN_ said:
From the looks of it, you did not successfully install a HardSPL. Search the forum to find one and install it. I use Olinex myself.
Click to expand...
Click to collapse
tnx!
To be able to install hardspl I would need to be able to boot in to WM wouldn't I? or is there a way around that?...

I've been reading alot of things on the forum, but can't aqtually find any way to flash the hardspl to my diamond seeing it dousn't boot thru to WM and if I boot to de spl screen it doesn't seem to pickup the hardspl update.
Maybe it's also because I'm running win 7 x64. Does anybody have any tips / ideas for me... I'm a little stuck at the moment..
Tnx

_-AUSSIE-_ said:
I've been reading alot of things on the forum, but can't aqtually find any way to flash the hardspl to my diamond seeing it dousn't boot thru to WM and if I boot to de spl screen it doesn't seem to pickup the hardspl update.
Maybe it's also because I'm running win 7 x64. Does anybody have any tips / ideas for me... I'm a little stuck at the moment..
Tnx
Click to expand...
Click to collapse
do you get 3 lines of numbers at the bottom right when you turn it on?
if so hold volume down and press reset,
you should get a 4 color bar screen with numbers if you have a hardspl installed
from there you can plug it into the pc and install a new hardspl or flash a new rom,
i hope this helps
if anyone can help with my problem look at my other post lol