Dear all ..
please ...i try to upgrading my JASJAM to WM6 is okay and Every thing okay but when i need to install the arabic file i maen CAB file like ACERT_ARB &Default_APrayerTimes_JSJM_eula the arabic dosn't work and my device tell me this message (( can not ran in this device )) So can any one tell me how to Solved this problem ..
Best Regards
GSM system said:
Dear all .. [snip!]
Click to expand...
Click to collapse
Yep! That's right. If you're trying to install the cabs from i-mate then Imaginet's Arabizer is i-mate branded. Wait (a long time) for i-mate to release WM6 for JASJAM (if ever) or buy your own legit copy of the Arabizer suite.
Arabic on jasjam
Arabic runs with any WM6 version on the jasjam using the attached files (also available on imate jasjam Arabic ROM).
Procedure:
a- Mount your EXTROM using HERMES_MountALLExtROM.cab.
b- Copy the files to the jasjam EXTROM.
. . . 1- Default_ACERT_JSJM_eula.CAB . . . . . . . . . . 243 kb
. . . 2- Default_MultiLang_AR_JSJM_eula.CAB . . . . 755 kb
. . . 3- Default_Imate_WWE_HER_V3.30.00.cab . . . 87 kb *
. . . 4- Default_PT_Reg_FixKeyboard.cab . . . . . . . . . 2 kb *
c- Using File Explorer, run the files and install on the main memory.
*Files 3 and 4 enable Arabic text on the sliding keyboard.
You can install the rest of the suite the same way, or try: http://www.smartnetwireless.com/PocketIslamPPC.htm which is free of charge and can be installed from the computer on the SD card.
Salaam,
You must extract this font.zip in yuor windows directory before you install arabic.
These are arabic fonts.
Best regards
Good luck
Actually it is not necessary to install any extra fonts.
The way I do it is, I install Pocket Islam + Bukhari & Muslim hadeeth packages, I then install the 4 files mentioned above; afterwhich I perform the configuration.
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
uploading the arabizer after upgrading to WM6
GSM system said:
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
Click to expand...
Click to collapse
at this moment, i'm uploading to you the Arabizer of the JasJam after upgrading to WM6. and it's working perfectly on any Rom. tried and working.
here you go the arabic system and also working arabic on keyboard.
Here you go, download the file, extract it. and move it to your storage card, and instal it in order of the numbers as from 1 to 17.
You have a full arabic working system and keyboard as well.
enjoy
http://www.megaupload.com/?d=FF6T44YI
@ GSM system, “Please read the following carefully”.
After installing WM6 and all is well and the phone actually works:
1- Connect through the USB and copy the file (HERMES_MountALLExtROM.cab) to a folder on the phone.
2- Now on the phone, click start menu --> Programs --> File Explorer and find the file (HERMES_MountALLExtROM.cab) and click on it to install it.
3- Once installed, reset (reboot) your phone.
4- Once Windows up and running, you will notice through “Activesync” that you can see EXTROM folder and the files inside it.
5- Copy the 4 attached files to the EXTROM folder to run them from there.
6- Again, on the phone, click start menu --> Programs --> File Explorer and find the ExtROM folder, click on it to open and you will find the 4 files.
7- Install them one by one then reset your phone.
If the above description does not work for you, you need to write a step by step procedure of what exactly you are doing so that we may be able to tell you where you are going wrong.
Q- Are the file format changed when being copied?
thanks Mr. Simple i Appreciate it you brother ... but pleaes where is the file.(HERMES_MountALLExtROM.cab).
thanks to all ... i try to instill all the cab.file i maen the arabic lang but don't work ...i don't know why some device after upgrading to WM6 then instill the 17 cab file the arabic is work okay ...but some device also i-mate ..the arabic is dosen't work ...So ...where is the problem ..if can any one help me ....
best regards
I think with some wm6 roms (like the latest lsvw rom) the device is reset to be an htc tytn device instead of imate jasjam and that what is what is causing the message "cant be run on this device." As u notice when u upgrade to the latest lvsw rom, the device name is set to htc_tytn. This dose not happen on the latest black rom. This is just my thinking why is this happening. I hope someone can solve this issue as I am thinking of going back to black rom.
Salam,
I am glad I was able to help, I have attached the ExtRom mount file.
May I also add that the best version of WM6 for Arabic is LSVW of May 19 which I have been running for the past 4 days without a single problem. http://forum.xda-developers.com/showthread.php?t=307951
I have also attached Tahoma font file (not important).
Good luck.
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Which pocket islam that is best for our device?
Thanks
I think the arabizer software is signed to work on Imate only
Sniper258 said:
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Thanks
Click to expand...
Click to collapse
I think the arabizer software is signed to work on Imate only
My device is T Mobile Vario II which is exactlly like the JasJam and the Tytn ..etc.
I tried more than 7 WM6 ROMS, and many ways of installing the Arabizer. but always
got broaken Arabic letters and the message
"can not run on this device"
Please can you all indicate what are you devices brands. Thanks
The phone I have is an i-mate Jasjam, I have upgraded this phone more than 15 times between WM5, WM6, Radio and EXTROM. This is not the first Windows Mobile phone that I have neither it is the first time I install Arabic, In fact I had a role in Windows 98 and Windows 2000 Arabisation many moons ago.
My current configuration is: IPL=1.04, SPL=1.01 MFG, Radio=1.41, OS=WM6 17913 LVSW, EXTROM=cooked. I do not install a complete ROM, and I always install individual component using MTTY.EXE (except for the radio). Immediately after a new install, I fill in user and device info; I then install the Arabic software. Initially I had a problem with the Jasjam sliding keyboard until I identified files 3 and 4 responsible for its activation.
Please notice that:
1- If you manage to install i mate Arabic ROM (WM5)
JASJAM_Arabic_1.20.305.3_1.20.304.104_1.07.03.10_ship.zip available on ftp://ftp.clubimate.com/ . Arabic should be fully functional and we should no longer talk about hardware. Be very careful, things could go wrong.
2- If you install Pocket Islam suite, you will be able to view and type Arabic using the screen keyboard (there may be a RTL problem when writing Arabic).
3- You can install the Pocket Arabiser Suite from http://www.imaginet-software.com/index.aspx?p=arabizer. It should work with any windows mobile device, but the keyboard will not. You know what to do (files 3 and 4).
4- I am not sure if the Arabisation software checks for a Jasjam signature, if such, you may need to install one or all:
. . . Default_MT_PC_Hermes_Generic_REG_060609.CAB
. . . Default_AHermesKBFlag_JSJM_eula.CAB
. . . Default_PP_KeyBoard_Layout.cab
. . . Default_PP_Version.cab
5- Try a clean EXTROM with only Arabic files in it, in case particular files are preventing Arabic files from running.
6- Try the way I do it (review my previous post) it may work for you then you can uninstall the software you do not need.
I apologize for the lengthy post, but I felt it may be important to a lot of people.
Good luck.
Dear Mr. Simple ....
i am thankfull caz you are Support this sabjact ....i have i-mate JASJAM after upgrading to WM6 no accept Arabic that is the problem ..i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me ..Mr. Simple to fixed this problem ...
with my best regards
@ GSM system,
Do not worry, if it works for me, it should work for you. Try the following:
1- Download the WM5 jasjam ROM from imate site (mentioned in my previous post).
2- Extract the EXTROM.nb file (this is the complete jasjam extended rom)
3- using MTTY.EXE install it to the phone like this:
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 8
3- Ensure you have WM6 (preferably LVSW as it installs the extended rom automatically) is installed.
4- Press (Left Soft Key + Right Soft Key + Reset) all at once and install the whole lot.
5- If it does not install automatically, mount the EXTROM and run Autorun.exe.
I hope you understand that the problem is not in the method/s provided, the problem is in applying them (or your hardware, which is unlikely). Concentrate on using the exact files provided and ensuring the steps are followed carefully.
Now, please notice saying "i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me" does not help much. You need to list the exact steps you are executing, at what stage an error appears and the error message.
If all fails, see if you can install the full jasjam WM5 ROM and if Arabic works for you then, if it does not, you may have a Hardware fault.
Can you also tell us; when you bought the phone was Arabic installed on it?
Important: A large number of this forum visitors are people with issues/problems or with development interests. Please have them in mind and ensure that your writing is as clear and descriptive as possible to help them or to enable them to contribute effectively .
Good luck.
Dear Simple ..
i am so sorry to bother you but i don't have any one to helpe me just you the problem now i don't have the Mtty.exe how to find this ...the my another qustion this mathed do by MS dos or how can i do it this ......
respactfully
@ GSM system,
You still did not come back with what I asked for, a step by step scenario and the error message!!
You need to do a lot of reading, please refer to:http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and go through some tutorials.
Also to: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG where you will find mtty.exe inside the SPL-1.01MFG_Pack.zip file.
I can only tell you 4 points that may save you time when trying to connect:
1- The file you need to load using mtty must be .nb (like EXTROM.nb)
2- to be able to connect the device must be in the IPL SPL page (color screen) to get there press (Power button + OK button + reset) release the reset then the other two.
3- to be able to connect using mtty you must disable activesync USB connection, do the following: right click on the Activesync icon on the task bar, then click on Connection Settings... and uncheck Allow USB connections.
4- It is best to have the file you wish to upload to the phone in the same folder as mtty.exe.
You are now in dangerous territory, navigate very very carefully; you could end up damaging your phone, what you want to learn is not difficult and already on the forum. Make sure you read the WIKI properly and use the search option of this board.
Good luck.
Related
Any help Pls???
a regular install ??
have u tried installing the arabyising suite from imaginet, regularly... ?
u mentionned previously u would install a w2003se, is such a rom available ?
I'm downloading the Arabizer from Imaginet now and will install it as soon as the download completes, but I doubt it will work properly as it is made for windows mobile 2003 and not 2005.
Unfortunately ther is no such Rom "2003" for Jasjar.... if it were there, it would have been much much faster and reliable.
Regards,
Khaled.
arabizer from jasjar extended rom
u can get the arabizer cabs from the erom of jasjar, i have them i can send them via e mail , i think they r too large to post as attachements here. my email is : [email protected]
salam
dr. mohamed eldardiri
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
Dear Dr. Dardiri,
Thank you very much for your gr8 support.
I have those cab files which came with my Jasjar, but unfortunately whenever I try to install them with the new test rom they don't work properly and they disturb the whole thing, so I think that there is something which needs to be up-graded in these cab files to make them comply with the new test rom.
I'll try the old araizer from Imaginet web site, who knows?! it may work.
I will post the result here after trying to install it.
My email is [email protected]
Regards,
Khaled El-Feki
they worked properly with me
i installed only 3 cabs , successively : the one with 1- acert, 2- acert2 , then 3- Ado , in this order, with no interruption inbetween, then i reset , it worked properly, i didnt use other cabs , as i used third party dictionary and calenders and stuff ... so i only installed the cab of my local provider , so that i be able to use wi-fi, everything is ok now. i installed the old imaginet arabizer , but it didnt work at all , and i hard reset.
one question though , i need to know how to use the arabic hardware keyboard as there s no alt key.
salam
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Actually I don't know how to use the hardware Arabic keys, but I will check in the mannual guide and post the way to do it here.
You can use the screen keyboard if you tap on the keyboard on the bottom of the screen and choose and then you tap the drop down list and choose لوحة المفاتيح" then you can use the Arabic screen keyboard.
Mohammad,
One of our room mates suggested me a solution, I tried it and it worked better than the default Arabizer which comes with the original old rom .
If you're interested to view the solution you can access it from this link:
http://forum.xda-developers.com/viewtopic.php?t=43213
Thanks again for your valuble support.
Regards,
Khaled.
arabic hardware keyboard
hello khalled
i was wandering if the new arabizer suite u installed supported the hardware arabic keyboard, coz i failed to use it using the default cabs. i knew that the shortcut keys are (shift+Sym) but it didnt work ...
salam
Hello Dr. Dardiri,
I installed the Arabizer from Imaginet web site, and I can tell you that it's much better than the one came with the I-mate rom.
But unfortunately I tried the hardware Arabic Keyboard but didn't work with me.
I will report this to the i-mate website support and see the result.
Salam,
Khaled.
based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!
Thanks, has it included the Chinese IME (like Pinyin by keyboard)?
sorry no china-japanese ime on it.
i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/
Did you mean thai font include?
wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****
Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.
Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT
first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode? right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!
thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's
This ROM is based on the official German O2 ROM:
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
- replaced the localized packages
- removed the O2 operator package (Settings and O2 Theme)
Big thanks to rvbcrs for helping and mirroring
I don’t have an Artemis... ok, my girlfriend has one, but she would kill me if I use that... so the ROM has not been tested.
Please report all problems here.
!!! This thread is not for questions about unlocking the device !!!
- In case that you have questions about that open your own thread -
Download the ROM by reading and clicking the red text
Some screen captures: (again thanks to rvbcrs!)
whAT about to compile it to nbh back? for exam use dopod Radio, empty extrom. And flfash it back?
Bepe ..!
this is cool
Thanks a lot
---updated---
Thought to try using the PDAMobiz package and replace the ROM and give it a try even though it's based on pdocwrite.. Result is an error during writing at some time.. So kids don't try this is you don't know how to recover using the bootloader or you'll have a brick.
------
I'm actually flashing it at the moment... I hope I won't regret this..
... but somebody has to try..
bepe said:
We had some problems to flash the OS.nb using pdocwrite... if someone has a solution for this, please help us
Click to expand...
Click to collapse
worked with small error, reset works perfect now
I need to upload pics but not allowed here..
Hi,
Can you tell us how you flashed it ? From bootloader results in a CRC/Certificate error.. Using pdocwrite (modified from PDAMobiz) resulted in a somewhat delayed write error here.. So what did I miss ?
eddie2k3 said:
worked with small error, reset works perfect now
I need to upload pics but not allowed here..
Click to expand...
Click to collapse
sparcle said:
Hi,
Can you tell us how you flashed it ? From bootloader results in a CRC/Certificate error.. Using pdocwrite (modified from PDAMobiz) resulted in a somewhat delayed write error here.. So what did I miss ?
Click to expand...
Click to collapse
press voice command button and press reset -colour bars - loaded success
then used ARTE from FTP site, copied os.nb to arte folder and rename it to windows.nb -run upgraderom.bat.
Update:
Never mind. Figured it out..
--
Hi,
What file exactly do you mean (filename pls) ? I only know of the PDAMobiz roms which are installed using a batch file.. The only ARTE I know if the official Dopod firmware update but it doesn't come with a batch file..
eddie2k3 said:
press voice command button and press reset -colour bars - loaded success
then used ARTE from FTP site, copied os.nb to arte folder and rename it to windows.nb -run upgraderom.bat.
Click to expand...
Click to collapse
sparcle said:
Hi,
What file exactly do you mean (filename pls) ? I only know of the PDAMobiz roms which are installed using a batch file.. The only ARTE I know if the official Dopod firmware update but it doesn't come with a batch file..
Click to expand...
Click to collapse
is your device orbit ?
is it cid-unlocked ?
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp.
ftp://xda:[email protected]/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
hello
how to run arte flasher on vista 64bit?
thanks
Requires a reset here since the os.nb/windows.nb update never finishes visually.. After that it works fine (after the reset needed during the missing bmp when customization attempts to start), exactly as you described.. Works great
For those wondering.. Works fine under Vista (32 bit version).. No idea about 64 bit version.
eddie2k3 said:
is your device orbit ?
is it cid-unlocked ?
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..
ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
Click to expand...
Click to collapse
I tried to flash it yesterday with the updaterom.bat file and it just stayed copying to my phone so I thought it did not work, but after killing the process after 25 min and resetting my phone I had WWE WM6 on my Artemis, still I think it is strange that pdocwrite never finishes. Apart from that great ROM some minor issues..
Cant download full ROM, only 24 M and stop, tried few times. Can someone upload to different place. Please!!
bepe said:
This ROM is based on the official German O2 ROM:
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
- replaced the localized packages
- removed the O2 operator package (Settings and O2 Theme)
Click to expand...
Click to collapse
bepe, can you tell me how much free RAM you have? I hope that you have more than 30 MB by removing all the O2 stuff. I never had more than 30 MB after a hard reset and some of my apps need 30 but I have only 20 now.
I was wondering if the apps e.g. windows live messenger are still in German?
eddie2k3 said:
is your device orbit ?
is it cid-unlocked ?
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..
ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
Click to expand...
Click to collapse
Why i can't download form this link? I saw that: " 530 Permission denied". Pls tell me why? I want to use English. Thanks!
My Orbit is from O2 UK, does it still have to be CID unlocked to get this WM6 on it?
Registerme said:
bepe, can you tell me how much free RAM you have? I hope that you have more than 30 MB by removing all the O2 stuff. I never had more than 30 MB after a hard reset and some of my apps need 30 but I have only 20 now.
Click to expand...
Click to collapse
I dont have the device... but I asked someone for some screencaptures
indiekiduk said:
I was wondering if the apps e.g. windows live messenger are still in German?
Click to expand...
Click to collapse
It really is a WWE rom... I replaced all German files and rebuilded (not edited!) the Registry based on the WWE packages. The screencaptures will prove it
I suppose you really know how to do this stuff. Can you tell me which tools I need for "cookin" my own ROM? I'd like to have it in German and with my own Ext ROM, maybe I can get rid of some apps that waste my RAM. I only need the names of the tools, I'd guess they are on the xda-dev ftp server. And how do I extract the ROM from the installation file? In your signature you have a nice GUI for the Hermes stuff, is it the same for the Artemis. If you want you can send me a short PM in German.
By the way, the link should be: ftp://xda:[email protected]/Uploads/Artemis/arte.zip thats what people say about error 530
Hello Everyone!
I had problems with my Ipaq. It has an italian ROM. So I´d like to flash it with an german ROM. On the HP-Homepage i found an italian and a german ROM. But of course it isn´t possible to use the german version. Couldn't anyone cook or dump a GERMAN ROM for the Ipaq 114? I think here are a lot of Germans who would really really appreciate that.
Many thanks!!!
Thomas Further Informations: Isn´t it possible to overwrite the italian nbf-file with the german one???
Got new informations!!!
Instruction to flash:
1.) You need the german and the italian Rom-update. Both have to unpack on your hard disk!
2.) You connect PDA with the PC, but not with the ac-power.
3.) Start the italian Softpaq. Meanwhile the Update the programm will recognize, that the update does only work with ac-plugged
in.
4.) No you rename the Romfile from the german Update with the name from the italian one and copy it to the folder with the
italian Update
5.) NOW plug in the AC-Power Cable
On this way you bypass the country check - this will be done before the checking of the ac-power.
No ideas???
It must be possible... Here are so many "professionals"!!!
By the way: This is a great forum here. Interesting discussions...
Has anyone experience...
...with the instruction from above???
Thanks for supporting
First, I have to say Hello!, this is my first post in this forum. I own an ipaq 110 classic series with WWE(world wide english).
I'have tried many ways to perform a language change, none of them appears to work, at least in this model. The method described above don't work on ipaqs 110 series, because this model only have a mini-usb port in the bottom end; which supplies data connection and power. Then... How I can "connect the AC power" to the device?. O maybe I'm omitting something.
Sorry about my english, I'm from Spain.
First of all you have to forbid your pda the charging via usb.
Use these settings to do this.
When the software ask, reactivate the settings...
Try it...
Greetings!
Bye the way. My english isn´t better. I´m from germany
EDIT !!!!!
SORRY!
It doesn´t work to deactivate the charging funktion. The problem is, that the pda use just one cable for the datas and for charging.
When you start the rom-update the setup programm automaticly start the charging option. The update starts immediatly...
No chance for overwrite the original language rom-file with the one from - in my case - the german one...
Need help! Please!!! It´s very important for me to have a german system (especially for my software).
additional information: i have a spanish model and i need urgently a german one...!!!!
HELP NEEDED!!!
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
uriazael said:
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
Click to expand...
Click to collapse
T H A T `S I T ! ! ! !
Thanks a lot!!! IT work !!!
Now i have the german version!!
You are the best!!!
Need Help To Change Language On Ipaq 110 Classic
hello everyone
I am going to get an ipaq 110 classic from my friend but it is French version, I have gone through this whole article and understand all the steps to change the ROM update for changing language but please someone guide me "WHERE I WILL HAVE TO PASTE THE "HPImage.nbf"
Also please adv if any other important step to follow?
Thanks
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
If you have some further questions send me a private message...
Greetings ThonaV
Need Help To Change Language On Ipaq 110 Classic
hi ThonaV
good morning, let me try today after getting home, sounds like should be ok now. will keep you posted.
thanks for your reply buddy.
kaled
Need Help To Change Language On Ipaq 110 Classic
Woooooohuuuuuuuu
I Have Got My Ipaq 110 Classic Speaking English!!!!
Thanks For Your Good Support Guys, It Was Not Possible To Do This Change As Hp Customer Support Will Never Provide This Kind Of Information To The End Users (of Course If They Start Providing These Technical Knowledge Nobody Will Buy Their Stuff And They Will Loose Chance To Make More Money)
But Thanks Again Guys For Your Great Help:d:d:d:d
Netherlands ROM
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
I have the actually german based ROM (April 2008) and wondering about this symptom:
Always when I connected my "blank" IPAQ 114 to active sync (sync with local Outlook) "and make" a new partnership - the Time on my PDA is "-9 hours" from our local time.
I test this with other IPAQ 114, with other Windows XP, and other AS 4.5 - always the same problem. If I use an other PDA (HTC Touch HD, Pro, S740) all work fine and the time on this devices are correct...
Any Idea what is the timesync Problem with ipaq 114 and active Sync?
the Language settings, time zones are correct on the IPAQ114.
I found a solution for an old IPAQ 6315 :But is that the really solution?
I found out that this is a know problem by HP. There is no current fix, but they did provide me with a work around. The work around is a 2 step process and both must be done before performing an ActiveSync. If not, the problem will become worse by advancing all the appointments in the host's calander. First, in the date and time properities on the PC, UNCHECk the automatically adjuct clock for daylights saving time box. Second, if the IPAQ is located in Eastern Standard Time, set the IPAQ's time zone to Indiana (IN) as they do not observe DST. If in MST set the time zone to AZ. If in CST set the time zone to Saskatchewan, Canada.
greetz joy
Error message on IPAQ 110...
Hello everyone
I need a little help with my IPAQ 110. I have the WWE based rom on it, but when I'm trying to change it I'm getting an error code 203... & the strange thing is - the SKU ID code on rom & device are the same!!! Do enyone had this problem and how I can fix it???
Thanks
Thanks all,
I have the English changed from German version!! I have Ipaq 2490.
You are the best!!!
DubyDu said:
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
Click to expand...
Click to collapse
It seems that there is very different ipaq 114 Dutch
You can try this ROM but it does not work on mine
ftp://ftp.hp.com/pub/softpaq/sp38501-39000/sp38994.exe
I change Language to Portuguese. Great topic. thanks to all.
my iPAQ 114 speak poruguese now !!
Sorry my english
can anyone post here the ROM for english ? i can`t download it
thx
Does anyone here have any idea if is possible to update an iPAQ 116 (that is pretty much the same as the 110 and 114) from WM6.0 to WM6.5?
I have one here but I don't even have it's instalation CD. For some reason I can't connect it by USB, just by Bluetooth.
Any help?
Hi All,
I just bought a i780 with WM6 in India. I am very very new to Windows Mobile and to be honest I have gone through several threads on XDA Forum, its all bit confusing for me.
I would like to upgrade my WM6 to WM6.1 and my version is DDHE1 as it is from India.
It will be of gr8 help to a starter like me if someone could give a definitive answer on what ROM I should download and where, What Hex text I have to change and any other info.
I know this is a lot to ask, also the answer may lie in several of the threads in this forum. But for a nube like me, it will be of gr8 help if someone can give me a definitive answer.
Thanks.
KK
hex editor
HxDen is a gud Hex editor:
http://www.mh-nexus.de
DDHE1 TO DXIB1 ROM UPDATE FOE SAMSUNG i780 bought in INDIA
WELL
1. First Download the ROM FILE FROM
http://my.samsungmobile.com/promotio...sitgbn=0000141
2. Then USing WINRAR EXTRACT FILES TO a FOLDER
3. THEN DOWNLOAD HXD EDITOR AND OPEN THE EXE FILE and CHANGE THE VERSION DXIB1 to DDHE1 FOR UPGRADING PHONES BOUGHT IN INDIA.
4. THEN SAVE THE FILE AND CARRY ON WITH INSTALLATION...
WELL I UPGRADE MY I780 BOUGHT IN INDIA VER DDHE1 TO WINDOWS 6.1
IF SOME ONE CANT DO THE Above Procedure WRITE TO ME....
REGARDS
SUNAY
SUNAY
Which EXE file to be edited? What's the detailed procedure to edit? Is it at one place or 'find & replace' at all occurances?
1. download mirage updater
2. download heroes 1.1 rom file (thats the best )
3. if you're using winxp to update, just start mirage....load up the bin file of heroes 1.1 that you downloaded onto the PDA part (using mirage) (using vista - u need to get usb drivers for ur i780 - search for i780 mirage update usb drivers)
4. now start ur i780 in emergency mode... 1st turn off ur device, remove batt...put it back in, 2nd hold function+enter+power (for atleast 5-6 seconds...until you see "Emergency mode" on ur display)
5. click "Detect" on ur mirage updater....and once mirage is ready....connect ur i780 to the usb cable.
6. this will flash ur rom over....and once its done - ur all good to go!
cheers
dreamtheater39 said:
1. download mirage updater
...s
Click to expand...
Click to collapse
Thanks dreamtheater39 for your detailed instructions. I'm n00b for flashing ROMs. Right now, I've upgraded to DXIB1 using Samsung's official all-in-one upgrader. But, I will surely try various cooked ROMs - EFN, Heros, Inertiax, etc.
ddhe1 --> dxib1
Finally got my i780 DDHE1 ROM updated to DXIB1.
Figured which file to edit, how to edit for this:
Upon unzipping (using Winrar) the DXIB1 upgrader downloaded from Samsung website as per sunaymehta's instructions, edit the DXIB1_XP.Exe (for XP) using HxD editor suggested by mGforCe. Search for I780DX, change it to I780DD (this is at only one place - near to very end of the Exe file), save the file. That's it. Then follow the upgrade instruction given in FAQ to move from DDHE1 to DXIB1.
i780 (Indian) Upgrad
Thanks I followed your steps, worked fine for me too