Related
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
Is there anyone who can help me with .cab files.
Ik extracted some form my extended rom and some have strange file-names. I would like to know what is is the cab file.
There must be a tool te read and create cab files.
Please someone help.
I tried WinCE CAB Manager 2.1, but now the evaluation expired.
Does Someone know another tool?
sharky48 said:
I tried WinCE CAB Manager 2.1, but now the evaluation expired.
Does Someone know another tool?
Click to expand...
Click to collapse
Try this free tools, is very usefull
http://www.codeppc.com/telechargements/msceinf/msceinf.htm
Thnx
Thank you filippodisvevia
Ik looks very nice. I think I can finally cook my own .cabs for my personal Extended Rom.
Sharky48
Happy for you.
Good job
Visual Studio 2005
I've read somewhere that Visual Studio 2005 is capable of creating (and editing) .cab files for Mobile devices.
Can someone confirm this?
I'm download VS2k5 now to try this.
sharky48 said:
[...]
I think I can finally cook my own .cabs for my personal Extended Rom.
Click to expand...
Click to collapse
Maybe I'm wrong, but I think that MSCEInf is only able to read the .cab files not to create one...
You're right Mr. Anderson.
But I'm trying Visual Studio 2005 now, maybe I have more luck.
Are you creating your own .cab files? What software do you use?
sharky48 said:
You're right Mr. Anderson.
But I'm trying Visual Studio 2005 now, maybe I have more luck.
Are you creating your own .cab files? What software do you use?
Click to expand...
Click to collapse
Now I'm learning the "how to" with WinCE Cab Manger.
I will send you a copy of WinCE Cab Manager! Contact me: [email protected]! I think with WinCE Cab we can read, modify, create and do alot thing about cab file! No nead for visual studio!
sharky48, i can send to you a copy of wince cab manager! contact me! [email protected]! I think wince cab is enough to do a lot thing about cab files!
yingzhou said:
I think wince cab is enough to do a lot thing about cab files!
Click to expand...
Click to collapse
That's for sure!
Special thanks to Yingzhou
Special thanks to Yingzhou !!
Empty Ext Rom
For Anyone who would want one.
I made and empty Extended rom.
All it does is reset the device once.
If you load the ext rom unlocker, you can fill the ext rom with you own tools.
Anyone do this yet and get it working.
Thanks
JM
jasonmoe said:
Anyone do this yet and get it working.
Thanks
JM
Click to expand...
Click to collapse
I Installed the widcomm drivers and it works great with WM6.
I'm thinking about making a rom with the drivers build in, if I can figure out how the edit the registry will try it now
Widcomm stack does exactly what?? What does it improve on, and I didnt think it was fully implemented for the Hermes??
Id love to get this working if your willing to tell me how to do it or what not where do i get the drivers
jasonmoe said:
Id love to get this working if your willing to tell me how to do it or what not where do i get the drivers
Click to expand...
Click to collapse
Hmm I can't seem to figure out how to edit the registry of the extracted rom
But you can find the widcomm drivers here:
http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72
trion said:
Hmm I can't seem to figure out how to edit the registry of the extracted rom
Click to expand...
Click to collapse
Due to having far too much work to do, I haven't even started looking at cooking my own ROM for the Hermes, but the registry should be stored in the default.hv file...
Look here for more info: http://forum.xda-developers.com/showthread.php?t=249836
Post #229 by Bepe has a (his?) tool to convert to/from .txt so that you can edit the default registry.
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
zohaer21 said:
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
Click to expand...
Click to collapse
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
dont know if this would help you but take a lot here :
www.asukal.jp/hv_rom/hive2.txt
or simply use Make_HV, found it in the development & hacking thread.
First covert the hv file to rgu (which is simply REGEDIT4 Format) then make changes and convert it back.
qooqoo said:
i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
Click to expand...
Click to collapse
This is my little surprise
qooqoo said:
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
Click to expand...
Click to collapse
You don't need a .cab for this. The program that goes through Config.txt can handle XML files with registry settings directly. So, grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want. If I'm not mistaken, it's even available bundled with a Chinese ROM already. There you can edit the .rgu files from which the Registry will be created. This eliminates the need to read any of the .hv files. Worked very well for me! Also, since bepe's kitchen recreates the packet structure of the ROM, it's so much easier to understand which files and registry entries have a dependency or belong together. Highly recommended!
Cheers
Daniel
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
weird suprise
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
Why would that be a surprise? Is there more to this than meets the eye?
dutty said:
weird suprise
Click to expand...
Click to collapse
Indeed, I've been hitting my head against it for some days now...
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
himan，give us a solution plz, it is a so good rom, but i can't add anything i want.
tadzio said:
grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
Click to expand...
Click to collapse
thk u but i don't know how to edit a xml file, any suggestion?
tadzio said:
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want.
Click to expand...
Click to collapse
it is for CHT but not for CHS, there is a lot of CHT roms yet, cooked or offcial, but there isn't a official rom in CHS, a just want to convert 0320 vesion to CHS vesion.
I will be watching this thread.
Waiting for good news.
qooqoo said:
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
Click to expand...
Click to collapse
I have the same problem...the LVSW 0313 version was fine...then the new LVSW 0320 won't boot..stopped at the subsplash screen...it is strange that the default.hv is there but doesn't seem to booting the file.
qooqoo said:
thk u but i don't know how to edit a xml file, any suggestion?
Click to expand...
Click to collapse
Any Unicode-capable editor will do. Personally, I use UltraEdit.
Cheers
Daniel
Please don't take offense, but I'm starting to think you got the ROM as it is..."protected" that's why all the customizations are done via AutoRun.exe and xml files.
i found that lvsw 0325 edition can be edit.
qooqoo said:
i found that lvsw 0325 edition can be edit.
Click to expand...
Click to collapse
Yes, 0320 can't be edited. But 0325 could. But you can't use the regular tools..you have to use the "more Storage" tool, then just manually copy the "default.hv" and "user.hv" from the "dump" folder, use the regular tool and covert it to .reg. Then you make modifications to the registry file, convert it back to .hv and copy them back to the "dump" folder..you can add files by just copying files into the "dump" folder..after you are all done with it, just continue with the "more storage" tool to make your new-os.nb
Anybody up to making a windows live cab from wm 6.1..
Windows Live Messenger Cab 10.6.0034.0800
Can´t install it
I got the cab but shows unsuccessful install...
do you have it working?
we actually would need the cab to check. this thread asks if anyone has made a cab for the new live? maybe you would be so kind as to provide it
For sure. Where is the cab?
I´m sorry for my bad English
Seems like I missunderstood the original post, I tought that the cab in Matt´s kitchen was the good one. Sorry for the confussion
I tried the one in Matts Kitchen and it worked fine for me. The problem is that it is Build 0600 and not 0700
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
TripleQ said:
What is the newest version?
I have installed 10.6.0030.2100 on wm 6.1 and its working correct..
Click to expand...
Click to collapse
Like to know this also..
My version: Windows Live (10.6.0033.0600)
The newest version of windows Live messenger is 10.6.33.0700 only found in Schap's WM6.1 Pro 4.40 Beta ROM. The Feature that appeals to me is that it has a dropdown box that gives you a choice of , Hotmail, MSN, and Live, . TNT says this will be in his new Wizard Rom Windows Live Messenger 10.6.0034.800, must be the newest, also Khans 2.3 Wizard version has 10.6.0034.800 with the drop down box.
Is it possible to make a cab file of the newest?
m0nkm0nk said:
Is it possible to make a cab file of the newest?
Click to expand...
Click to collapse
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
noellenchris said:
I'd like to learn to make a cab file..... I did find the IE 6.1, but still haven't found the SMS 6.1 ...... If anyone has a link to someplace that can help me learn to create a cab file that would be helpful.
Chris
Click to expand...
Click to collapse
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager you can find it here
IM a naughty XDA member that posted warez!!!
NO WAREZ ON XDA
Mate, whilst applauding your kindness in helping out your fellows, I think you should edit and delete your post in case you get a bit of a hullaballoo started.
Mustn't post links warez like that on here, mods are quite adamant about it usually.
pashamangl said:
hello!
to make a cab is not a big deal!if you have wincecab manager it's preatty easy but you must search some tricks over the net!i would glady help you but i'm not so good in english language so i better stay away!if you need wincecab manager CeCabManager
Click to expand...
Click to collapse
Thanks for the response! I will look for WinCECab and give it a go. You can edit your post and remove the download links to the Warez... I wouldn't want to anger the Modz...
I can't wait to start dabbling with these cabs.....lol .... I'm sure I'll be Hard reseting a few times after I apply some of my new cabs....lol
Chris
what's new in new build ?
i don't have a time for creating a cab, but maybe the package will be useful for some of you to create a cab
attached, enjoy.
Well thanks TNT! It's a good start, someone will probably beat me to it though. I'm at work and won't be able to get to this till tonight or 2morrow.
Chris
Xda 2?
Does this one work on the xda 2? If not is there any msn i can install for it? Please help.
Thanks a million TNT
you are welcome
i want to tell that this build has many fixes with new features were not there in previous versions.