Related
Hi all, well, i have the newest version of the o2 rom installed on my xda2s that i downloaded from o2 website. now my first question is this,
1) can i downgrade to a previous operating system and if yes, then how and where can i download it, if not then i need help with the following....
2) after a hard reset or a clean install with the new rom, after the o2 active stuff has installed, my xda2s seems to crash all the time, now i noticed it too much 2 weeks after i got it, and sent it to the o2 shop for them to have a look at it, and didnt get it back for a few weeks... NOT A GOOD START.. i got it back and had an older version of windows 2003 second edition installed, so it looked like they just wiped it and put an earlier(more stable) version back on.... now i decided to take a chance and tried the windows mobile 2005 but no luck, so had to download and install from o2.co.uk
and now im back to square 1. crashes 5-6 times a day
3) also relating to the above, if i hard reset or clean install, before o2 active stuff is installed, i have a digital clock in the corner of my screen top right, after o2 active install its gone, i cant get it back, Any ideas how to solve this, its doing my head in as i like to look at the time on it....
i tried the hard reset and switch off before anything installs and also the corporate option too, i couldnt connect to internet and also couldnt send text doing that, and i do actually like the o2 stuff...... i edont use o2 active, but like the battery plugin and the o2 themes and phone skin.
is there another way round this or am i just buggered beyond help????
at least if i can download any previous versions of the o2 version o2 windows mobile 2003 2nd edition, that would be great!!!
anyway chaps, please help
take care guys.....
joey.
You could try here ......
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIs_launchROM.htm
They seem to have the old XDAII launch rom's too.
Rich
Mine was just the same until I removed all the O2 crap, can't even remember the last time I had to even soft reset but guessing at least a month!
Trick is to put machine into Corporate mode after doing a hard reset (use 0506 when asked for code) you will then get a clean WM2003SE install with NO O2 rubbish. You still even get the O2 GPRS/MMS settings etc..
Worked for me and several others on here
wilesd said:
Mine was just the same until I removed all the O2 crap, can't even remember the last time I had to even soft reset but guessing at least a month!
Trick is to put machine into Corporate mode after doing a hard reset (use 0506 when asked for code) you will then get a clean WM2003SE install with NO O2 rubbish. You still even get the O2 GPRS/MMS settings etc..
Worked for me and several others on here
Click to expand...
Click to collapse
i could quite be an odd FM then, cos this i tried after reading and trying things i see in these forums, this forum is by far the best i found an i plan on staying, I even work for o2 and they can even be bothered to help me
i tried clean install by removing battery before any crap is installed, this worked but no settings, i tried corporate mode, no joy, also in corporate mode my mms and txt and gprs settings were there, but would not connect, so im back to the full whack, with o2 active, I have to admit, i like the o2 active and all the skins and stuff, so id like not to loose them, i tried corporate all day yesterday and noticed that my battery lasted twice as long. so maybe corporate is the best option i dunno, but i really wanna get to a previous version and try that, so ...........
fishmedia
PostPosted: Thu May 05, 2005 13:15 Post subject:
You could try here ......
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIs_launchROM.htm
They seem to have the old XDAII launch rom's too.
Rich
Click to expand...
Click to collapse
i shall try the above, Cheers rich...........
if anyone else has any more ideas, please post them!!!!
ps, if im honest, it was ok until i tried to install windows mobile 2005, :roll:
my own fault! :roll:
Has anyone been able to install Rogers' Mymail on their Blue Angel?
When I go to the site (mymail.rogers.com/ota) it doesn't give me an option to download the application.
- According to Rogers tech support, MyMail will not work on the BA (PDA2K for me).
- Since you must install the client APP through the browser on the PDA2K, it sees that you aren't using the HP 6325 and gives you an error message.
- This is based on what Rogers told me though, not from my own experience.
- I've been using GetMail on my PDA2K using the SX56 client for a couple of months, and am relectant to switch to MyMail unless there is some real advantiage to do so.
- Security issues aside, apparently MyMail can't be configured to dial-up only when user requested like GetMail. This is a drawback for since I need to "pull" e-mail when I want it, not every 5 minutes (or whatever specified time interval).
- If you do hear of someone getting the MyMail client for the HP running on their BA, let me know!!
Thanks,
Rombo
- According to Rogers tech support, MyMail will not work on the BA (PDA2K for me).
- Since you must install the client APP through the browser on the PDA2K, it sees that you aren't using the HP 6325 and gives you an error message.
- This is based on what Rogers told me though, not from my own experience.
- I've been using GetMail on my PDA2K using the SX56 client for a couple of months, and am relectant to switch to MyMail unless there is some real advantiage to do so.
- Security issues aside, apparently MyMail can't be configured to dial-up only when user requested like GetMail. This is a drawback for since I need to "pull" e-mail when I want it, not every 5 minutes (or whatever specified time interval).
- If you do hear of someone getting the MyMail client for the HP running on their BA, let me know!!
Thanks,
Rombo
I guess there may be a registry hack to get IE to announce itself as an IPAQ?
I don't see how the software would be different...[/code]
Where can I find getmail?
- Strange that they've taken it off the Rogers site already. I guess since it was replaced by MyMail, there is no longer a need for it?
- I can e-mail you the two GetMail .exe files, then you would need Rogers tech support to walk you through the install, since I don't recall which you need to install first.
- The files are 5.5MB and 2.9MB
[email protected] (remove tilde and nospam to reply)
emailed.
Different answers
Hey guys, I got different answers from Rogers. I've tried three times to get the device app installed, and the last two times I just told them I had an IPAQ 6325. Seems the Rogers Navigate browser provides a direct link to the /ota site, while regular PPC browsers take you to the normal mymail website.
Does GetMail provide real time push? I've been using Smartner and it's not too bad, but only pushed every 10 minutes or so.
Groo - did Rogers walk you through the install?
Re: Different answers
gohabs said:
Hey guys, I got different answers from Rogers. I've tried three times to get the device app installed, and the last two times I just told them I had an IPAQ 6325. Seems the Rogers Navigate browser provides a direct link to the /ota site, while regular PPC browsers take you to the normal mymail website.
Does GetMail provide real time push? I've been using Smartner and it's not too bad, but only pushed every 10 minutes or so.
Groo - did Rogers walk you through the install?
Click to expand...
Click to collapse
the did walk me through the install. I told them that I had an Ipaq as well. They claimed that I was seeing the non-wap version of the page.. didn't make much sense... I'm sure the app asks the device to identify itself. I'm sure a simple registry entry could fool it... Not really sure if it's worth going any further..
I thought it might be a Wap thing, so I installed EZWap but got the same result.
How is GetMail working? Is it real time push?
gohabs said:
I thought it might be a Wap thing, so I installed EZWap but got the same result.
How is GetMail working? Is it real time push?
Click to expand...
Click to collapse
I have no clue, still looking for the binaries for getmail
Rogers Getmail is pull mail only
I've been using the GetMail app with Rogers' Enhanced Wireless Desktop for about a year.
Last Thursday, something broke. When I called Rogers tech support, I was told that Enhanced Wireless Desktop had been decommissioned and that I would have to start using MyMail... There's a catch... Only Rogers-provided devices are permitted to download the .CAB file so I'm out of luck with my PDA2K since it's not a 'supported' Rogers device :evil: !
I told them I don't need them to support my device... Just give me the .CAB file and I'll take care of getting the app working. No dice!
If anyone has the .CAB file, or has some sort of hack to have the PDA2K appear as an ipaq h6320/h6325, please let me know.
Thanks,
Dan.
Rogers GetMail
- I've just posted the GetMail files (in a zip file) for the SX56 client to the ftp site (uploads/BlueAngel/Rogers GetMail).
- Sorry it took so long, but I'm an FTP newbie.
- As of yesterday, GetMail was still working fine on my PDA2K, but Dan makes a good point about Rogers forcing a switch to MyMail, since I recall I had to log in to GetMail through Rogers site to activate it??
- I'll let you know if it crashes, but someone needs a hack for us to get MyMail operational on the PDA2K!!
rombo
I stand corrected... I called Rogers again this morning and the tech support person deleted my Enhanced Wireless Desktop account and re-created it and, once I re-installed the Desktop Assistant (on my PC) and Get-Mail client (on my PDA2K), I was up-and-running again.
Rogers technician I spoke to suggested I find someone who owns one of the ipaq 6320 or 6325 and ask them to download/install the MyMail client on an SD card and just handle the rest of the install through registry edit and file copy (if any files are copied to the device RAM instead of the SD card. Anyone out there try this approach or know someone who'd be willing to lend their ipaq for this test?
Dan.
Got it working
Thanks for posting the executables. You can actually download them directly from wirelessdesktop.rogers.com as well.
The install was identical to Mymail (except the device install actually worked).
Seems to work ok, other than it is pull, and the shortest interval is every 15 minutes to sync.
Hi gohabs,
Are you saying you managed to install MyMail on a PDA2K (client install)?
If yes, can you post the .CAB file (for MyMail)?
Thanks,
Dan.
Sorry
No, I meant that I got GetMail installed. I had the same problem as you guys with MyMail on my XDA IIs.
I got the MyMail desktop app installed and configured, but could never get to the ota web page to install the device app.
Getmail works fine on the XDA, so I'm sure if someone can extract the cab for Mymail it will work as well.
Here it is...
A
Hi There,
Is this the current (as of Dec 15, 2005) version?
Dan.
Could I please be so greedy as to have a Orange-UK only thread?
I am been reading and searching in earnest to see what other peoples experiences are with the various Radio ROMs. It seems most people are happy with 1.38.00.10, although seems to be a few instances of people sticking with older versions because of battery life/drop outs/data freezes. But I am unable to establish what other people are experiencing in the UK on Orange's network.
I am well familiar with the Radio ROM 1.38 + WM6 - good or bad? thread, but not many people in there commenting on Orange UK.
If you are on Orange UK, please can you share you experiences here?
My own experience has been thus.
Before upgrading to WM6, was on stock M3100, which had Radio 1.06 I beleive. This worked flawlessy with push email (Exch 2003), and never had any problems at all with it. This was also the case when I upgraded to LVSW 20070315, leaving Radio Rom as was.
Then I upgraded to Black 2.0 last week, and did the Radio to 1.34 with it. I didnt notice any problems at first, or rather didnt take much notice of not getting email notifications whilst at work. But on Friday I realised the Data connections were freezing.
I have tried going to 1.38.00.10, to 1.35, back to 1.06, even 1.27. Have also tried going back to LVSW 20070315, and am now on LVSW 20070408
I have narrowed it all down to the "common" problem in swicthing between GSM and 3G. At home I seem to be between 3 transmitters, and swicthing is common. Hence the problems I was having Friday.
The Excellent commmgrpro has helped here. Also Bandswitch.
Anyway, with Phone set to GSM only I have no problems. Odd thing is, driving to Sheffield and back yesterday (dont mention the football!!), with phoen set to Auto, I had no problems at all.
Yet at home, and at work, on auto the data connection freezes.
So.... Whats everyone else using on Orange?
i've been using rom 3.23.0.2 with radio 1.38.00.10 on a spv m3100. this device is been freezing like you described in your post, thing is, it's become unuseable since you have to reboot after the freeze and it happens almost continiously... driving me insane.
if anyone knows of a way how to get back wm5, i'd appreciate it!
freben
When I upgraded a while ago I was wondering the same thing. The only negatives re 1.38 at the time seemed to come from orange UK customers so I went for the 1.27 radio and it seems fine.
Have not yet stepped up further, and at the moment, see no reason to.
Especially as I can even get the H now and then. (If it aint broke...)
@Phil, I've "gone black" (v 2.0) with Radio 1.38.00.10 - only since Saturday, so it may be too early to tell. I've got a push email account with Mail2Web, which I don't tend to use that regularly - it's good for aggregating lots of mail stuff when I go away on business, but my data package ain't up to much (don't get me started ) so I only switch it on when required.
Since installing the new ROM/Radio/SPL, my M3100 seems to be much better than it was prior to the update. I've reinstalled all my apps (apart from PPCProfilesPRO - I'll do that tonight) and the phone seems really stable - no more random lockups when taking it off charge and only a couple of "slowdowns" when ending calls, or if Activesync'ing....can't really complain if I'm honest
I'll keep an eye on things - and maybe switch on the Exchange push email for a couple of days - and I'll post again if the situation changes.
Cheers,
Mark.
PS - Message for @freben; read MrVanx's guide on downgrading to WM5 - see THIS POST for details of how to find it.
MrVanx kindly provides a guide here: http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
Do please read very carefully before trying it
Yep...1.27 for me. No real radio problems to report.
Spent a couple of weeks with WMXL 2.0 and the last two weeks with Black 2.0. Both work fine with Orange with 3g (inc HSDPA) and voice. Direct push/web/pop email all fine.
One freeze this morning (first one in two weeks) but dont know if it was radio or os or an app?
Can;t compare with other radios but simply can say am happy with 1.27 (hence why I havent tried 1.38 etc)
Having no problems with set up in sig.
had the freezing with the stock set up.
Could/should we be more scientific here and use one of the many web2.0 survey sites to do a ROM/OS survey to find the right mix?
with a little effort we could then find the most reliable Radio ROM and view by Country/OS/carrier/etc.
just a suggestion..
Mark Crouch said:
but my data package ain't up to much (don't get me started ) so I only switch it on when required.
.
Click to expand...
Click to collapse
@Mark,
try Orange World Browsing, 8ukp for unlimited data access 24/7
Give O a call on 150 and then the billing option, 4
Orange World Browsing is what is what the O rep told me it was listed as. I think one of the key points is the cost, it’s 6.81 exc VAT or 8 inc VAT, that’s the way to check you have the right package.
And you need to be on a 35ukp per month tarif or more to get it.
apologies for off topic post!!
(I was told it was Orange World Unlimited)
unwired4 said:
(I was told it was Orange World Unlimited)
Click to expand...
Click to collapse
My bill confirms it as Orange World Browsing -although I too thought it was OWU.
Not sure if it is still so hard to get as it once was.
Sheep_Head - Well, I am definetely up for using a survey site - any recommendations?
I gave re-flashed my phone back to Black 2.0. Seems to be what most people are using here (IMHO). Have tried Radio 1.27, 1.38.00, and right back to 1.07.
With a totally clean device (i.e. straight after flashing), setting up the orangeinternet connection manually, the thing just wont connect to 3G. Only when I have Band set to GSM will it connect.
Jeez!
I am now in the process of going back to an Orange WM5 rom, to see if it makes any difference, (albeit the Romanian one, so will have to reset the internet connection).
Getting mildly frustrated now.
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
philg2000 said:
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
Click to expand...
Click to collapse
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Hey guys - mega useful thread.
I 'thought' I had solved all of my woes and was feeling bloody smug with myself as I thought I had managed to keep the stupid questions down to a minimum. After reading this obviously not .
I am running Black v2.0 (happily) and the rest of the handset is as per my sig block but I have removed spb pocketbooks and replaced it with shell. I thought it was all working correctly but I am suffering the same connectivity issues as yourself (gprs and not 3G).
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Anything I can help with or test let me know and I will do what I can.
Bezman.
wberesford said:
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Bezman.
Click to expand...
Click to collapse
I have just tested the voicemail fix again since my reinstall and the certificates cab plus installing the sms dll has always worked for me.
Are you having any specific issues with it?
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
mrvanx said:
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Click to expand...
Click to collapse
Hmmm... I dont think that will achieve anything. I have had the latest LVSW ROM on there a while bad, with the same problem.
I'd really like to hear from anyone who has returned a flashed M3100 to Orange.
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions.
Bezman.
Click to expand...
Click to collapse
The only way I have done this recently is using Resco File Explorer. You need to go into the Options menu to ensure you can see all files, then copy the sms_providers.dll into the \Windows directory. It warns you, but if you say yes it lets it happen. I have done this numerous times (have flashed my phone about 10 times recently!) without any problems!
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
Click to expand...
Click to collapse
First few times I did this, it just copied OK with the file explorer. Most recently tho it gave me the same error - so I went to the zip file on my ppc and told it to extract directly to the windows folder, said yes to overwrite and it did. Maybe worth a try. (install the certs first incase it makes a difference.)
SMS Providers CAB
To make my life easier I put the sms_providers.dll from WM5 into a CAB. To install make sure you've installed the sdk certificates (http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298) first and then install this cab - a soft reset is requested at the end of installation and is required.
I've tested this on the latest LVSW ROM and it works perfectly, hopefully will overcome peoples issues with copying this file.
Long-time lurker, first-time poster.
I picked up a S620 a few months ago, and finally upgraded it to the official WM6 ROM linked in the sticky (1.33.422.1) a few weeks ago. (I couldn't do it until I found the USPL.bat file - thanks to the author!)
I've installed Blackberry Connect 4, and it's working fine, except for the fact that my corporate BES IT Policy insists on locking the device after five minutes of inactivity. "Annoying" is an understatement.
I found some directions on how to bypass it at the link below:
http://forum.xda-developers.com/showthread.php?t=336355
but that method uses Memmaid. I downloaded it, but it won't work on WM6 standard. I tried Task Manager from Fdcsoft, but that won't do it, and the interface doesn't really work on WM6. I also grabbed SK tools, but that won't seem to let me stop the service. What can I use that will let me do this? I'd prefer free, but I'm willing to pay for something that works well.
Thanks in advance!
sculler1x said:
Long-time lurker, first-time poster.
I picked up a S620 a few months ago, and finally upgraded it to the official WM6 ROM linked in the sticky (1.33.422.1) a few weeks ago. (I couldn't do it until I found the USPL.bat file - thanks to the author!)
I've installed Blackberry Connect 4, and it's working fine, except for the fact that my corporate BES IT Policy insists on locking the device after five minutes of inactivity. "Annoying" is an understatement.
I found some directions on how to bypass it at the link below:
http://forum.xda-developers.com/showthread.php?t=336355
but that method uses Memmaid. I downloaded it, but it won't work on WM6 standard. I tried Task Manager from Fdcsoft, but that won't do it, and the interface doesn't really work on WM6. I also grabbed SK tools, but that won't seem to let me stop the service. What can I use that will let me do this? I'd prefer free, but I'm willing to pay for something that works well.
Thanks in advance!
Click to expand...
Click to collapse
Have you tried using celetask? You can view running apps and processes including hidden ones and kill them.
showaco said:
Have you tried using celetask? You can view running apps and processes including hidden ones and kill them.
Click to expand...
Click to collapse
Thanks for the pointer - it's a good program, but it doesn't quite do what I need. It stops tasks and processes, but it looks like what I need to do is stop a statup service. Any suggestions?
Thanks!
Navigate to your registry key HKEY_LOCAL_MACHINE\init
Your answer might be in there.
Remember to back up your reg.
Any mishaps is on you like anything else in this site.
Mikey1022 said:
Navigate to your registry key HKEY_LOCAL_MACHINE\init
Your answer might be in there.
Remember to back up your reg.
Any mishaps is on you like anything else in this site.
Click to expand...
Click to collapse
Thanks - that's helpful, and I see how to disable them, but I've figured out that what I really need to be able to do is to stop a service, and also set it from manual to Automatic. The service needs to start when the main Blackberry Connect service starts, but then it needs to be shut down after each reset.
So how can i stop it after it's already running?
Will Blackberry Connect work on the Touch Pro2?
I have installed version 106 and no luck as yet with t-mobile., stiil pending.
I just put the blackberry service on the phone and they said give it another day to activate the service.
Any help/suggestions would be appreciated.
i have been stuck on this issue for a week... no luck...
wrote to htc and they came back saying that look for updates on its site... now that's a really long shot..
would suggest that you too write to them... lets put some pressure..
this is a business phone according to them... then bberry is as much important!
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
When i had installed the software without the above settings, i had a PIN and IP address - but it would not connect.
Later on i had hard reset the phone...
now i re-installed the software with the settings u mentioned, but i do not have a PIN or IP Address and bbconnect will not register either...
could u please tell me how to un-install it safely too? as i do not want to do another hard-reset now!
(btw, i had done a hard reset on the phone earlier coz after i tried 106 and uninstalled it, i installed a previous version 100 and it hung my phone.... )
peebee01 said:
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
Click to expand...
Click to collapse
Thanks..I just unstalled and tried your settings still no connection or PIN.
am sure htc engineers visit these pages too....
hope u guys understand.. that u r touting the tp2 as a business phone.. and we need blackberry too in a business phone to complete the package....
we cannot connect to exchange alone (that incurs data charges and is not roaming friendly - especially international).. we need bberry coz that keeps us mobile from country to country that we visit...
common guys... its just a few lines of code u hv to modify... am sure...
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
I'm an Aussie wanting to purchase a Rhodium...
I'm upgrading from a 7100G blackberry handset. (yup a massive upgrade). Although the most critical part of my phone... (apart from making phone calls) is my blackberry push e-mail...
I can't afford to change over phones until I know that the Blackberry Connect 4.0 works. I know that HTC have a special version of the Blackberry Connect for the Diamond, the Touch Pro ect...
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61
With Windows 6.5 rumoured to be released within the next month I'm speculating that we won't see Blackberry Connect 4.0 working on the windows mobile 6.1
Zsocee said:
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
Click to expand...
Click to collapse
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
mirage22 said:
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
Click to expand...
Click to collapse
Me too!! Not working.
Had T-mobile and Rim on the phone together with no luck.
Well I contacted HTC to find out when it would work and this was the reply I received:
Since Windows Mobile is our platform for the HTC handsets, we would push customers to use the Microsoft exchange server.
The device comes with microsoft exchange server support and also supports IMAP and POP3 accounts.
HTC is not going to release any Blackberry connect applications and it would not up to HTC to do this. If Blackberry wants to develop an application and release it to HTC, you may need to check with RIM/BB.
RIM (is the company name)
Blackberry is the platform
Hope this information helps.
Sounds like the person I was contacted by either has no idea or there's no plan for blackberry connect to work on the touch pro 2.... Oh well looks like I'll have to purchase a storm...
Just be patient...
I'm more than sure that we will get BBC to work the same way we did it before. By manipulating the Device-ID string in the ROM (from HTC-Rhodium to whatever) BBC should recognize the device as "allowed" and it _should_ work. So all we have to do is to wait for the HardSPL-guys getting it done so that we can flash custom ROMs. Once this is done, I assume we will have BBC up and running.
Blackberry Connect.
Blackberry Connect does not work on the device, however, it seems to work on the HD.
From Sems.org
Has anyone tried this?
from http://www.sems.org/entry.asp?entry_id=338#IDComment31926819
Paul
Report Reply 1 reply · active 2 weeks ago
0 Vote up Vote down AirwolfUK · 2 weeks ago
make sure your AKU is set to .1.6.3. I have bbc .106 working fine on my touch pro2 with this and the SetModelID solution
Report Reply
I am planning on upgrading from Fuze to Fortress (TP2) and want to see if this works. You need to make sure your account is provisioned for BBConnect service.
Didn't work for me even after switching system ID to identify as Raphael, on T-Mobile US.
It works fine on the Rhodium. Check out the thread entitled "blackberry connect, not yet working" It got working about halway through. I use BBC on mine but I needed to make a couple of tweaks as outlined in that thread.
Dominoid - Rhodium - Blackberry connect
very interested in your asnwer dominoid.....can you send us more specifics as to how / what / where. We are dying to get Rhodium work with BBErry Connect. Which version worked with yours?
Does anyone know the orignal AKU for the ATT Tilt2?
I hate cross posting in threads, but somehow people decided to open different threads on the same topic. (Maybe a mod can merge them into one if he reads this).
Read more for a final solution without using SetModelID and starting and stoping services each time:
http://forum.xda-developers.com/showpost.php?p=4782317&postcount=163
Direct Link to the HowTo: http://www.silentservices.de/HexEdit-ROM-for-BBC.html
BBC
Works excellanty on my TP2 on Vodafone India Delhi n/w
follow steps on this forum
http://forum.xda-developers.com/showthread.php?p=5123157#post5123157:o