Develop Bugs

Problem with softbank X01HT

can anyone help me? Im new with PDA. What happen was i tried to upgrade my PDA, and i manage to install the satin black. after trying another os my pda doesn't want to reboot when the installation was succesful. tried hard reboot and it goes to the red green yellow and white screen. now everytime i get the spl 1.40 to install it works till 100% but after that it won't reboot. what can i do? thx. please help

you should hard spl your x01ht first before upgrading your pda.
did you do hard spl first?
what is your radio rom, SPL??

Need help ! cingular 8125 bricked :(

Hey iam new to this upgrading,CID unlocking etc.
I just bought my Cingular 8125 three weeks before.
I tried upgrading to WM 6.0 The update process completed successfully but after the reboot my mobile was back to factory default with wm 5.0.
without tring the lokiwiz to unlock, i used shelltools to flash the wm6.0.
it was successful, it asked me to do a hard reset.
Since then i am stuck up with the boot screen.
I can't get my Mobile back working.
i tried flashing with the Offical rom but of no use.
i have tried button rom, love rom. nothing works out.
without much knowledge i upgrade my spl & IPL to 3.08
now i am not able to downgrade that too.
tried flashing different roms but of no use, still it stucks up in the boot screen.
the only hope iam having is i am able to get into the boot loader.
I am not sure, where to post this thread, my appologize if i have posted in the wrong page.
below is the information i have on the screen
IPL 2.26
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Some one please help me out. i am very much worried, any help is very much appreciated.Thanks a bunch in advance !
dosai.

Have you tried flashing from the bootloader to an official rom?

thanks for reverting, i have tried that too, but of no use.

Sounds to me like you didn't run the Cert_SPCS and EnableRapi cab files before flashing with ShellTool. Being stuck at the splash screen is a dead giveaway.
I never did understand why someone would attempt to flash a ROM without doing ALL the steps. . .

i did ran Cert_SPCS and EnableRapi cab before running the shelltool. shell tool took around 10 mins to complete the update.after restart, my phone stucked up in the boot screen!. (i remember not unlocking the cid before proceeding with the shelltool) .
is there any way to get the mobile working i am too worried.

Solution
Hi, press and hold the CamShot Button and press the Power button, when you see a multi-color screen you can make a update again.

Hello all Im new here and have the same problem. I followed all the steps and followed all the instructions to fix this problem but nothing. I am stuck on the multi-color screen and i can't do nothing! HELPPPPPPPPPPPP!

Bricked hx2750 help

After an successful rom upgrade from win 2003 se ITA to wme5 eng AKU 3.5.2 i`ve got my hx2750 dead.
The only thing that i can do is contact+itask + reset and got o Pre-BL: 1.00.02 screen. i tried original hp update/ patched update / universal bootloader/mtty and host11 without any results. hp update / patched update giveme succesful update after 2 sec then shutdown my ipaq. With mtty i can connect with my ipaq but i don`t have any prompt just flashing cursor. With universal bootloader it start and do nothing. And last host11 give me lost usb connection after 1 second. I tried to contact hp and they ask me 280$ for a motherboard change... crazy!!!
Is there any chance to remove my ipaq from trash and give it a second life??? any ideas?help?
Thanks very much
Abs.
P.s. sorry for my english

I see you posted in the thread I had going with a similar problem - unfortunately, I have no other solution than swapping with a second device - on the brighter side - if you purchase one and fix the other one, you can probabley resell one of them for around what you paid for it
Good luck!

It`s not easy to find a used device in italian.. Btw i`ve got a little update.
Now i`m able to flash wme5 original / Aku / and wm6. But i have another problem.. flash process are ok.. on first reboot my ipaq start and at 30% of startup process shutdown... i will work on it..
Abs

good luck and share your experience.

Ok, well if you're able to get it to flash - try flashing back to 1.00.00.L - should boot then. Worked for me - so give it a shot.
I had to reflash to the original rom (no boot, but able to successfully flash in bootloader) - then to 1.00.00.L (boot and hard reset) - then to 1.00.00.H (boot and hard reset) - then to 1.00.25.H (boot and hard reset) - then to WM6 (boot and hard reset) to get everything to work after mine was bricked.
Oh, and if you DO use another device - it doesn't have to be the same language as the original - just swap to the correct file/language at the appropriate time in the flash.

Diamond stuck in Airplane mode?? Please help

I bought a Diamond which is locked by my Carrier AirTel. I flashed HardSPL Developers edition and then the TLR 2 ROM. After which the phone is stuck in Airplane mode when I try to switch it off Bluetooth and WiFi turn on automatically?
The phone has become very slow and it takes 3mins for TouchFlo 3d to startup also after sometime I receive a gwes.exe crash error and the phone freezes.
How can I fix my bricked phone?
Update: I have tried Hard Resetting and flashing other ROM's, including the factory ASIA ROM's available here. But sadly nothing works, I get the same problems and the same slow speeds
Update 2: I just happened to read HELP!! Diamond cannot connect to network seems like this guy is facing the same problem. Can anyone provide me the AirTel factory ROM?
Question: Can a sim unlock solution solve this problem permanently?

working on solution
and no indian diamonds have a different radio

what happens if u remove the sim n boot? does the phone run properly? (in airplane mode of course)

yes important dont flash with roms if you have an indian diamond

http://rapidshare.com/files/126887587/indian_ship_rom.rar
indian ship for u

maybe a incompatible rilphone.dll in your windows directory

Follow these rules (if the previous one doesn't fix the job):
Soft reset
hard reset
flash ROM
flash radio
hardSPL

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi

HTC P3300
Follow this link and have a deep read
http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis