White Screen Permanent!! - P3300, MDA Compact III General

Have sent it back to o2 now, but wondering in the 2/3 week anticipated for repair,if any one else has had this problem.
All running well,then turn on to only get this white screen.No soft or hard reset options,or entering bootloader.Battery out overnight.Only sign of life was flashing phone signal light.
Had recently installed spb insight,but can't think this could cause such a major problem.
Any one else had this?

Also got white screen issues with HTC P3300
I'm getting white screen issues with HTC P3300. White screen then vertical stripes. Hungry programs involving wi-fi or gps seem to trigger within minutes otherwise can be hours. Also soft reset never works. Hard reset does not work with key combination ever either. Have managed to do hard reset with clear storage option. Need to leave battery out for an hour to be able to turn it back on. Rom is original. OS 1.12.0.0. Been all over the web looking for possible causes. Suggested culprits are loose connections inside or overtightened screws. Is it too early to get the torx screwdriver out?
HTC are offering an official upgrade to WM6 13/07/07 for the P3300.
What will I do?

I have the same problem some times.
The phone has it's original software and rom.
It isn't software problem.
After a hard reset does the same thing.
I am waiting the service to come back from vacations.

Related

White screen

HI All, have an intersting problem, was surfing the net via wireless when the unit locked up. Soft reset and now all I get is a white screen. The unit seems to hard reset with the startup sound that the unit makes when you first start it up out of the box, but the screen stays white.
Any Ideas? :roll:
mmm.... Hard Reset :twisted:
HI Xeon,
tried that and still comes up with white screen, but does all the correct things re sounds but all you can see is a totally white screen.
You could try leaving it with the battery removed overnight but it sounds like a hardware problem to me, could be the lcd has died or the connection has come adrift for some reason.
I suggest u Upgrade or reinstall the ROM , maybe something happened to one of the files that should not be modified , anyway , u won't lose anything , u already Hard.Rstd .........
i had the same problem before..i did an upgrade that fixed it. but still have a backup even if its a white screen..after i upgraded i had another problem with the Storage Folder missing..and the list goes on..dont wory you'll know what i mean when you get it..
It happened to me the second day I got my O2 XDA IIs. Hard reset didn't seem to do anything... The unit didn't response to a soft reset either... It was just frozen... I removed the battery, boxed it up and was ready to return it. The next day, just before I was about to drop it off, I was curious and did a reset and everything went back to normal... It never happen to me again... Don't know what happened :?
I have the same problem...
The phone shows white screen white it can recieve & make calls, activesync can recognize it.. But the screen still white !!
Any other suggestions for helping solve this problem..
Is this means that the LCD is dead ?? or the problem in its connectors or it's a software prob. ???

Stuck on align screen

I have a Siemens SX66 which has worked great since I got it when it came out. Recently I cracked the screen so I replaced it with a new lcd including touch screen. The screen is a geniune HTC Sony screen. After putting it together again the software was reset. It asks to touch the screen to begin. Then, it goes straight to "align screen" and asks to tap the target at each location as it moves around to align the screen.
It seems to be stuck there because I have had it cycle through the same spots (original and 4 corner spots) over and over at least 20 times without going to the today screen yet.
I tried reflashing the software and after a successful flash it still does the same thing.
Can someone tell me what to do to make this thing work again?
Same thing here :0
Did you two guys solve your problems?
I have the same problem, I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !

Device crashes after use and locks screen

I have a problem with my Tmob MDA Compact III. After using my device for whatever reason, I will come back to it after a few minutes to find that I cannot turn it back on. That is, the screen has turned off as expected, and normally the green flashing led is flashing intermitantly as normal. However pressing the power button has no effect in turning the screen back on. I have checked re battery issues and that seems fine, however this does not happen when it is plugged into the mains. The only way to get back into the device is to remve the battery and turn it back on. I have found when doing this however that the device is far sower to reach the main WM Today screen, especially on the screen prior to the Windows 'loading' screen. I have found that sometimes the screen is not off, but actually dimmed, very low and a dark navy in appearence. Again, the only way to regain control is to remove the battery.
I am running WM6 (standard fro TMob) and have only ran the offical ROMs on it. I've not tinkered with the internals at all! I have performed a hard reset of the device hoping that this would resolve this issue but unfortunatly this still continues.
I'm stuck now and desperatly after help. Cant afford a new phone and contracts not up for ages yet.
Help!!
Welshgaz
Send it back
Have you considered ringing 150 from your T-Mobile handset and arranging to have the phone sent for repair. I think if you are within your contract you are within your warranty so to speak. T-Mobile will then send it to HTC who will look at the device and see if the problem is covered by warranty or not.
If the issue is outside warranty for whatever reason they will tell you this and quote you cost of repair.

Another White Screen Problem...

So, I left my Artemis in my RAM Aqua Box waterproof phone case attached to my motorcycle while I ran into the store.
I came out, started the bike and started the ride home. That was when I noticed the white screen and my tunes had stopped playing. I've seen it happen before (while turning off the phone in camera mode, etc), but a simple soft reset always fixed it. Not this time...
For two days now I've flashed it back to factory, installed my latest ROM (twice), reconfigured all my settings, etc, only to have the phone seize up by fading to the White Screen Of Death. The only fix is to remove the battery and let it sit for a bit. I have found however I can get the phone to run longer if I put it in the freezer for 15 mins, then it runs as it should until it warms up.
Sometimes it will work for half a day, other times it will fade out even before the soft reset boots up again. It really doesn't like being plugged in to charge or sync.
Now for some more background info. It did get deathly hot in the case I have because it has a clear face, is sealed, and it was sunny. Also, I started the bike when the phone was plugged in. I've heard this is bad for the charging circuit, but I'm leaning to the overheating as being the seminal event of the start of my sorrows because I've started the bike/truck many times with the phone plugged in. Did my luck run out?
What have I done, and how do I fix it?
i have had a white screen problem on my phone to it would go like this when just left on or when wanting to flash it in boot mode i have taken both sim card and memory card out and i have found that the memory care is curupted and works fine now will have to formate the memory card in order for it to work properly in the phone again
htc artimis 02 orbit
Yes, you can remove your memory card.
Just had similar problem. Possible reason: ROM update. Possible solution - ROM changed again (different) and hard reset. Hopefully everything will be ok. Until now (9 hours) - it is!
SCREEN
Hello
sorry i speak english a little.My TC P3300 have a problem on screen.I replace the lcd screen because the old make a hole white every 5 s.With the new its the same.What happen
thanks
I have the same Problem I started getting the White screen when i try and access anything it hangs and then goes white screen I removed the sd 2gb and left the sim in and id stil did the same thing but now i put the 4gb out of my laptop and now it seems to work but i still get the power on problem sumtimes
Im running wm 6.5 Arte_WM65_23009_WWE_Fixed_IE_b1
Any sugeustions? help plz
i have same problem
Even I was facing the same problem. I did hard reset couple if times and didn't find a solution. So finally I gave the phone to the service center and it seems now it's been fixed. I will ask the service guys about the actual problem and would post it here.
It may help someone.
Now I am going to try android on my phone, wish me luck.
Regards,
Rajesh
rajeshrr said:
Even I was facing the same problem. I did hard reset couple if times and didn't find a solution. So finally I gave the phone to the service center and it seems now it's been fixed. I will ask the service guys about the actual problem and would post it here.
It may help someone.
Now I am going to try android on my phone, wish me luck.
Regards,
Rajesh
Click to expand...
Click to collapse
Did U ask the service guy abt the screen problem

HX2790 Dead Help

Hi,
first this is a great forum even the roms are great.
I am coming to you with a big Problem and i don´t know what to do anymore.
As me was given back my ipaq it was completly empty. When i put it on the cradle it began to start. After 2 seconds booting the orange light flashed one time (sign for loading) and after this the screens shuts off and the hp loo is like burned into the screen.
I had this before when i had an error bei updating my rom.
So i thought to hard reset or clean reset or to put it into preboot mode to update the rom. But nothing works. He is not taking any kind of reset.
So i thought i have to charge the battery. But didn´t help it even did´t get warm after one night charging. But when i am trying a reset, after some tries puting it on the cradle back, he tries to boot but the same happens. I have win 6.0 installed.
Does anybody has an idea? I need it on Friday for my holidays, if not i don´t have any navigation system and i am traveling by caravan over 5000km, it would be hard without.
I am counting on you guys, thnx a lot for helping
As far as I know - there is nothing You can do.
There is a problem with motherboard. And it seems that this problem appears just after a drop. Some inner component become loose.
I do have a one hx2490b motherboard with the same problem - it starts to load and then turns itself off. Trying to do a reset does not work as well there is no bootloader.

Categories

Resources