I have a Siemens SX66 which has worked great since I got it when it came out. Recently I cracked the screen so I replaced it with a new lcd including touch screen. The screen is a geniune HTC Sony screen. After putting it together again the software was reset. It asks to touch the screen to begin. Then, it goes straight to "align screen" and asks to tap the target at each location as it moves around to align the screen.
It seems to be stuck there because I have had it cycle through the same spots (original and 4 corner spots) over and over at least 20 times without going to the today screen yet.
I tried reflashing the software and after a successful flash it still does the same thing.
Can someone tell me what to do to make this thing work again?
Same thing here :0
Did you two guys solve your problems?
I have the same problem, I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
Related
Hey guys, hoping you can help me with a problem with my harrier.
It was was working perfectly fine, and I replaced the touch screen (original screen was cracked) and it seemed to be working perfectly fine.
However one time, the battery fell out, and when i put it back (and ever since then) it showed the Pocket PC 2003 startup screen, and won't go any further then that.
Reseting didnt work, so I tried discharging the internal battery (by leaving the the battery off it for several hours), and then charging up the battery and charging up the internal battery.
That broke the cycle, now it showed the Welcome to Pocket PC, please touch the screen to continue - however touching the screen did not have any response. I tried hard reseting, and what do you know, back to the boot up screen only cycle.
Another thing, the boot up screen as soon as you turn it on, and then you can't turn it off and it's completely unresponsive.
I thought it's possible there was a loose connection inside, from when i took it apart, but i took it apart again and plugged everything in again, but it's still doing the same thing ~_~.
Does anyone have any ideas whatsoever?
Thanks!
Willuknight said:
Hey guys, hoping you can help me with a problem with my harrier.
It was was working perfectly fine, and I replaced the touch screen (original screen was cracked) and it seemed to be working perfectly fine.
However one time, the battery fell out, and when i put it back (and ever since then) it showed the Pocket PC 2003 startup screen, and won't go any further then that.
Reseting didnt work, so I tried discharging the internal battery (by leaving the the battery off it for several hours), and then charging up the battery and charging up the internal battery.
That broke the cycle, now it showed the Welcome to Pocket PC, please touch the screen to continue - however touching the screen did not have any response. I tried hard reseting, and what do you know, back to the boot up screen only cycle.
Another thing, the boot up screen as soon as you turn it on, and then you can't turn it off and it's completely unresponsive.
I thought it's possible there was a loose connection inside, from when i took it apart, but i took it apart again and plugged everything in again, but it's still doing the same thing ~_~.
Does anyone have any ideas whatsoever?
Thanks!
Click to expand...
Click to collapse
you could try flashing it back to 2003 use a shipped rom you ma still be able to download one from the service providers site or from the ftp read the ba wiki good luck
swampy395
yes!!!
Willuknight said:
Hey guys, hoping you can help me with a problem with my harrier.
It was was working perfectly fine, and I replaced the touch screen (original screen was cracked) and it seemed to be working perfectly fine.
However one time, the battery fell out, and when i put it back (and ever since then) it showed the Pocket PC 2003 startup screen, and won't go any further then that.
Reseting didnt work, so I tried discharging the internal battery (by leaving the the battery off it for several hours), and then charging up the battery and charging up the internal battery.
That broke the cycle, now it showed the Welcome to Pocket PC, please touch the screen to continue - however touching the screen did not have any response. I tried hard reseting, and what do you know, back to the boot up screen only cycle.
Another thing, the boot up screen as soon as you turn it on, and then you can't turn it off and it's completely unresponsive.
I thought it's possible there was a loose connection inside, from when i took it apart, but i took it apart again and plugged everything in again, but it's still doing the same thing ~_~.
Does anyone have any ideas whatsoever?
Thanks!
Click to expand...
Click to collapse
Soft reset to your BA, before the red software letters appear in the splash screen push camera and record buttons simultaneosly , if you do correctly simultaneosly three labels gonna appear, with camera and record buttons you can choose the labels and set "yes or no". set all to "yes" exept KITL, after do it press message button and your BA begin to boot, dont afraid for the white screen it take a moment
did you sort it? - I have been through this exactly. Pressing the camera and record buttons does not do anything in wm2003 and there is almost no delay before the boot screen appears.
I reflashed mine with ship roms and in all cases the BA froze at exctly the same place. Amazingly enough I fixed it by letting the internal backup battery go completely flat (took the main battery out for a few days), flashed with fresh ship rom and all was fine. Even works great with WM6.1
Worth a try, I tried so many things and none of them worked I was going to throw it in the bin, amazing how easy the fix was.
thanks for the replies.
Currently trying to find a rom for a CDMA blue angel.
Try this post, it does work on Vista.
I know that it is an o2 rom but will be fine then follow the steps to upgrade as before
Try this link
http://forum.xda-developers.com/showthread.php?t=281959
I have been using CRC 12.11 for a while. A strange problem started all of a sudden. My screen went white although it is working. Soft reset didn't solve the problem. Hard reset solved the problem for a while and then it came back. I noticed this at the time it happens. While everything is fine, the screen fades out, a few lines like scratches appear and then the screen stays white. I hear system sounds, the phone rings but no display. What has caused this?
I flashed another ROM but when my phone restarted it was still white. I hard reset and now I am waiting. If it reappears, it means it is a hardware problem right?
andreasy said:
I have been using CRC 12.11 for a while. A strange problem started all of a sudden. My screen went white although it is working. Soft reset didn't solve the problem. Hard reset solved the problem for a while and then it came back. I noticed this at the time it happens. While everything is fine, the screen fades out, a few lines like scratches appear and then the screen stays white. I hear system sounds, the phone rings but no display. What has caused this?
I flashed another ROM but when my phone restarted it was still white. I hard reset and now I am waiting. If it reappears, it means it is a hardware problem right?
Click to expand...
Click to collapse
I had this same weird issue once on my rom, i think it's because of the Big storage bug.. Flashed OEM rom and went away.. only saw it once!
I reflushed several ROMs that I used to have before without problems and still have the same. I can't install OEM, I think it's because of the bootloader version but I don't remember exactly the procedure to correct this and I don't know if it's worth the effort in downgrading to OEM.
Another thing I just noticed is that the screen is not aligned in the center. There is a small gap on top of the screen as if the image has moved downwards. Maybe this is the cause of the problem. Noone had similar issue? I don't believe it has to do with big storage because I have been using it fot a while and this never happened before, not even once.
Any ideas will be apreciated as my only choice right now is to buy a new phone.
same thing
i´ve been looking around and some people say is because the magnet in the pouches, affect in some way to the screen ribbon or something like that.
that is a common problem with the hermes, if u search the forum u'll find a couple of threads like this.
it's a hardware problem, next symptoms will be the green/red buttons and d-pad stoping to work
I know theres a few links in the FAQ about the white screen issue, its fixable in some cases.
problem solved!!!
i just took it apart, one of the ribbons which connect the green and red buttons was kindda folded also the connectors , so i just blow some compress air and tried to unfold the ribbon, put it back together and voila! like new. Just be carefull cause it´s like fragil.
same exact problem word for word
The same exact thing happened to my hermes. I guess I can attempt to put mechanical skills to work and fix this problem.
my tp2 touch screen is not responding suddenly!!! the problem started only after i answered some call through the screen slider, however, the touch screen is not responding to my fingers ever since !!!!
now i'm operating the phone only through the buttons !! but as if it is not touch screen!!
anyone have a clue about what the problem can be?? please help me. my device runs wm 6.5 and this is the first time to have this problem, i did soft reset many times but no imrovment!!
I had SOD this early morning and it was my first, do you guys think there is a relation between these events???
I have the same problem.
Just happened this morning.
I was able to use my mobiler to access the screen.
Tried several hard resets. No luck.
Tried re-installing energy Rom (4.1)
Then tried the new Energy Rom (4.11) still no luck.
But then I got the big idea to go back to the stock ROM. Now I cannot use the on screen prompts to access "my mobiler"
Anybody have any suggestions or is it back to AT&T for a new phone?
so whe you back to the stock rom, did u get ur screen working again??
No. no workey
Now that stock rom is on. I keep going back to the "Sim Card Changed" screen. I can not tap "cancel" or "Next". I can use the hard buttons so I am able to get to the phone and then use keyboard to dial.
Still no touch screen. And no work around with keyboard to get to screen. need a "Tab" button. then might be okay.
this sucks.
Just a quick bump before I go to AT&t in the morning.
Try running task 29 and then flash back to a stock.
And have you tried taking your sim card out of you're phone? Maybe that will avoid the message.
i'm buying a black berry
Does your screen look as if an oily residue is under the touch screen part?
My screen stopped responding a few weeks after the appearance of the 'oil' and Vodafone swapped it with no problems. It seems like a fairly common problem
yes, I've got that oily spot and somehow i managed to relief the problem only for minutes when i raised the digitizer carefuly which got me the screen working for few minutes untill it went unresponsive again after while. I'm looking forward to do alcohol swab to this oily spot and will see weather this will solve the problem..
I hope someone might actually help me out with this. I used my phone perfectly good yesterday, tonight, i put it on standby, and go to bed. Woke up in the morning, i grab my phone, turn it on from standby mode, everything's fine, but digitizer is not answering to my touch. Soft-reset, and try to put pin, but all i get is pressing 1 / 4 / 7 no matter which part of the screen i actually touch. I haven't been flashing it for months, and i had the latest simplicity rom when this happened. Thought it was an alignment problem, so i navigated with keyboard till the align screen, and tried to align. It went in loop, as soon as i pressed the last align point, it went back to the first point, without letting me exit. Tried to re-flash with a stock rom, same problem. Tried to re-flash with an energy rom, same problem. Anyone got any ideas of what the hell happened?
May be some condensation/moisture in between the outside screen and the touch screen. This happens to me all the time when its in my pocket and its hot out. Try using your finger nail, or something, to go around the edges of the screens plastic. It will let moisture escape.
Good luck.
So I've had my Tab 3 for a little over 6 months now and have had no issues what-so-ever 'til now. My problem is with the screen just suddenly becoming unresponsive after locking it after use. I swiped my finger across the screen to unlock and got right back into my tablet like normal, but then once I tried to do open up applications from the Home Screen nothing happened. I tabbed lightly and swiped repeatedly trying to get a response.... nothing.
My screen LCD screen is flawless and is original, it has never been tampered with. There are no cracks or scratches or anything it just suddenly stopped working. So I figure it's a software issue, no big deal, right? Wrong. I did a soft reset by holding down the power button, it reboots and comes back to the home screen. Nothing. I figured wth I have nothing important on here, let me do a hard reset. Boot into recovery mode wipe the cache and tablet performing a hard reset. Tablet then reboots to the default setup screen to choose language. Nothing. I can't choose anything. I don't know what's wrong. Lastly, the battery was semi-low around 20% or so before this all happened. So I let it fully charge again hoping that'd help, but nothing. I'm at a loss of what to do next.
NOTE: This is all original and is stock everything. I've never modded this tablet or rooted it. I don't understand how the digitizer would just give out for no reason, it hasn't been dropped or anything.
Any other troubleshooting I can do? I've thought about installing the USB drivers and putting it into download mode to flash a custom rom or even the original to see if it'll work, but I don't want to do that unless necessary. If it is the digitizer are these hard to replace and costly?
Ta-ky said:
So I've had my Tab 3 for a little over 6 months now and have had no issues what-so-ever 'til now. My problem is with the screen just suddenly becoming unresponsive after locking it after use. I swiped my finger across the screen to unlock and got right back into my tablet like normal, but then once I tried to do open up applications from the Home Screen nothing happened. I tabbed lightly and swiped repeatedly trying to get a response.... nothing.
My screen LCD screen is flawless and is original, it has never been tampered with. There are no cracks or scratches or anything it just suddenly stopped working. So I figure it's a software issue, no big deal, right? Wrong. I did a soft reset by holding down the power button, it reboots and comes back to the home screen. Nothing. I figured wth I have nothing important on here, let me do a hard reset. Boot into recovery mode wipe the cache and tablet performing a hard reset. Tablet then reboots to the default setup screen to choose language. Nothing. I can't choose anything. I don't know what's wrong. Lastly, the battery was semi-low around 20% or so before this all happened. So I let it fully charge again hoping that'd help, but nothing. I'm at a loss of what to do next.
NOTE: This is all original and is stock everything. I've never modded this tablet or rooted it. I don't understand how the digitizer would just give out for no reason, it hasn't been dropped or anything.
Any other troubleshooting I can do? I've thought about installing the USB drivers and putting it into download mode to flash a custom rom or even the original to see if it'll work, but I don't want to do that unless necessary. If it is the digitizer are these hard to replace and costly?
Click to expand...
Click to collapse
well replace a screen digitizer require a basic set of skills on mobile repairing. However I found this on ebay (US) http://www.ebay.com/sch/i.html?_odk...en.TRS1&_nkw=T217S+screen&ghostText=&_sacat=0
but you can try to flash into latest firmware by samsung and try again