Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Which version are you using (of phonealarm)
No problems here with version 1.58 build 100. Using latest LVSW.
Try running the latest beta version (available on the pocketmax forum)
000-000-0000 is a skype. Unfortunately some networks still allow that number to come in. I got one myself today. Ridiculous because if you block it no one from skype will be able to call you.
I have pa 1.58 (build 100). Can you get a skype number if you don't use skype or have there software installed.
Still getting the missed calls from (000)000-0000. The phone doesnt ring just a notification of missed call. Happens 3-4 time a day now. Anyone have any ideas.
chrisryn said:
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Click to expand...
Click to collapse
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Am using PA 1.6 b9 on black 2.0 no problems.
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
lanwarrior said:
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
Click to expand...
Click to collapse
Same as the final release, 30 days.
Have you tried a different skin? I've read that there are some skins that will work with WM6 and some not, i just can't remember the name ;(
Some people also reported that if you set the startupdelay in the pa-config (~10sec.) helps, followed buy one two or sometimes even three reboots....
crazyC said:
Am using PA 1.6 b9 on black 2.0 no problems.
Click to expand...
Click to collapse
I just tried 1.60B9 again and still no luck.
but i am sure i saw some post, where people stated that PA works fine with LVSW. Please can someone confirm that?
Starting to feel like a stupid easter lamb.
chaos42 said:
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Click to expand...
Click to collapse
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
jcespi2005 said:
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
Click to expand...
Click to collapse
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
chaos42 said:
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
Click to expand...
Click to collapse
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
jcespi2005 said:
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
Click to expand...
Click to collapse
and exactly this spirit was preventing me from throwing my tytn out of the window back in august'06 when i bought it
I was a palmOS user for almost 10 years before, and without the help of this forum and all the people here i'am pretty sure i would have gone mad about my ppc phone.
xda-developers you rock!!!
i have no issue until v1.60 beta 6.
beta 7 > got problems. pain. pain.
couldnt get it to play nice with cingular black 2.02. WOn't install at all...
Related
Hi guys..
I did do a search for this on the forum, with no result.
Since the flash of WM6 to my HTC TyTn, there was a big drop in received call volume.. Even when i increase the volume to max its sometimes hard to hear what the other person is saying, and compaired to a wm5 rom its a little softer.. Is there a registry tweak to maybe increase received call volume?
This is mainly coz in some noise filled areas i use to be able to hear the other person, but since wm6, not so much anymore..
Thanx guys..
*PS, if this is in your eyes another lame post, feel free to delete! no cares!*
EDIT:
Ok, im just another noob now.. Just went on searching on google and found the answer on this forum through google.. Why didnt it show up on the forum search????????
http://forum.xda-developers.com/archive/index.php/t-297493.html
I couldn't agree more and the speakerphone volume is pathetic..
If theres a fix then I have obviously missed it..
look at the link.. there is a little registry tweak.. i tested it.. it works, but not to the best, its a little louder..
Also looks like the setting will be lost during softrest or hardrest...
Just curious .. what ROM are folks using? It seems to me that the new CUSTEL ROM is a bit louder than the other WM6 ROMS I have tried (though it may be my imagination).
I most recently came from Black 3.01 ... then to LSVW 05/07 ... now am using CUSTEL 2.0. All have their pros and cons ... but I think CUSTEL's may not have this volume issue.
or, it is all in my imagination?
I agree with the initial premise, however, that the upgrade to WM6 seems to have degraded incoming call volume.
Hey, I've used Custel's V1.3 and am currently using a modified LVSW. I've noticed Custel's has a louder incall volume - had to keep the phone away from my ear! It seems to be this setaccusticsparam file - it was mentioned before with people that had Hermes that were TOO loud. I *Think* the file is in the ExtRom portion of the ROM.
BorisTheSpider said:
Hey, I've used Custel's V1.3 and am currently using a modified LVSW. I've noticed Custel's has a louder incall volume - had to keep the phone away from my ear! It seems to be this setaccusticsparam file - it was mentioned before with people that had Hermes that were TOO loud. I *Think* the file is in the ExtRom portion of the ROM.
Click to expand...
Click to collapse
Is this file in all ExtRoms?
Anyways, i tryed the fix in he first post that i updated in the link.. Now my phone is nice and loud, had an hour long talk with one of my friends last night and i had to either keep the phone away from my ear or make it softer.. The registry tweak worked.. will see if it sticks on the next softrest i have to make.. Rom is very stable, havent rest in over a week now..
which tweak?
the posting cited has two diff tweaks in it. Which one helped? Or did you do both?
oh man.. sorry.. i used this one..
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory = 0
The setting was on "2", changed it to "0" and this worked for me.. Thing is damn loud again..
I checked out the other tweak aswell but that was standard on my phone.. So no change on the second one..
I'm using Black 3.0.1 now, it's the only one I can use. The others were all way too loud.
Thanks for posting this. before the newest Cingular release of their new WM5 rom I had to go to bluetooth because I couldn't hear much of anything on the phone. I did with the newest rom, but it seems to have gone away with black, so I will welcome Custel's rom even more since it does this.
This has worked for me also, changing to 0 from 2 is the trick. What about the bluetooth volume? i have a JX10 and i would love it to be louder thou
This worked for my in call volume too.
Anyone know of a fix for the bt headset low volume issued?
Thanks
[email protected]_4ngel said:
oh man.. sorry.. i used this one..
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory = 0
Click to expand...
Click to collapse
I also suffer from this problem so grateful for the fix. Can anyone tell me how to change the registry on my TyTN? Thanks.
bobbyelliott said:
I also suffer from this problem so grateful for the fix. Can anyone tell me how to change the registry on my TyTN? Thanks.
Click to expand...
Click to collapse
use a registry editor like resco or commander. easy to find with a search.
It happened what I feared...the purpose of my 3d was completely misunderstood ( maybe because I'm not mothertongue English?).
I have absolutely nothing against Olipro , infact when I wrote he might have been the "culprit" I wrote culprit between " "...
I think he is a great guy even if I don't know him in the flesh and I completely trust him , proof is that I flashed his boot loader myself too...
I was just trying to understand which common points are there between all of us experiencing the SOD and I thought, from the very little that I know , that this could have been a possibility but if you read my 3d you'll find that I'm doing also other considerations so , in my opinion , closing it so quickly wasn't after all a good idea.
But this is life , Olipro is correctly consider a guru inside here and I'm nothing so i can understand all this reaction to protect him even if my intentions have been over looked because as I already wrote it was not my will to offend him or his job which is always great. I just wanted to break the discussion concerning the SOD which is always rotating around the same things and possible culprits and in this way we haven't reached very much so far...
I'm confident that Olipro didn't get upset after my message, I don't see a reason why others should do.
Regards all and thanks for the flame!
Uh!...by the way, To answer to Bram87 I also did flash the new official WM6release from HTC but it didn't solve the issue I'm afraid.
SO you are adding some third party applications...?
Man, you are obstinate.....
FYI: I'm using Olipros Bootloader since some months and I flashed at about 15 Roms and I never had a SOD.
Conclusion: Olipro ist NOT causing SOD'S.
mariner said:
Uh!...by the way, To answer to Bram87 I also did flash the new official WM6release from HTC but it didn't solve the issue I'm afraid.
Click to expand...
Click to collapse
hmm..strange. I downloaded this HTC wm6 rom http://www.megaupload.com/nl/?d=IASNVPS7
well good luck..
Oh yes, many of them... the same third party apps that I installed soon after I bought the tytn and didn't give me the SOD , including Wisbar and SPB software including mobile shell...
mariner said:
Oh yes, many of them... the same third party apps that I installed soon after I bought the tytn and didn't give me the SOD , including Wisbar and SPB software including mobile shell...
Click to expand...
Click to collapse
Then you really should read up on your problem.
Most of the sleep of death issues have been identified as caused by third party apps.
Sounds to me like you are either using an application that simply isnt compatible with WM6 or you haven't downloaded the latest versions (SPB particularly, you need the latest updates).
When you bought your device it came with WM5. Most of the apps are designed for WM5 and some of them are causing troubles with WM6.
If you want to check out which apps are causing troubles flash a rom and run it without any app for some days. Then start to install one app after the other and test every app carefully.
As I told you above: I never had a SOD even though I've installed Olipros bootloader
Bram87 said:
hmm..strange. I downloaded this HTC wm6 rom http://www.megaupload.com/nl/?d=IASNVPS7
well good luck..
Click to expand...
Click to collapse
I got mine from here
http://rapidshare.com/files/40593234/HTC_WM6_Official.rar.html
gerald_s said:
When you bought your device it came with WM5. Most of the apps are designed for WM5 and some of them are causing troubles with WM6.
If you want to check out which apps are causing troubles flash a rom and run it without any app for some days. Then start to install one app after the other and test every app carefully.
As I told you above: I never had a SOD even though I've installed Olipros bootloader
Click to expand...
Click to collapse
I'm glad to find that Olipro bootloader didn't ease the SOD thing...
I already did the kind of troubleshooting you suggested me without being able to isolate the problem.
My SOD started with WM5 and I decided to upgrade to WM6 for this reason but now it's back again!!!
unwired4 said:
Then you really should read up on your problem.
Most of the sleep of death issues have been identified as caused by third party apps.
Sounds to me like you are either using an application that simply isnt compatible with WM6 or you haven't downloaded the latest versions (SPB particularly, you need the latest updates).
Click to expand...
Click to collapse
Now I don't have any SPB software acting in the background installed and I had the latest SOD one hour ago... Wisbar still onboard but auto start disabled and not running at the moment...
gerald_s said:
Man, you are obstinate.....
FYI: I'm using Olipros Bootloader since some months and I flashed at about 15 Roms and I never had a SOD.
Conclusion: Olipro ist NOT causing SOD'S.
Click to expand...
Click to collapse
Thanks for sharing your experience with me...
Bram87 said:
hmm..strange. I downloaded this HTC wm6 rom http://www.megaupload.com/nl/?d=IASNVPS7
well good luck..
Click to expand...
Click to collapse
I just downloaded the file...It's a different one from the other that I got out of Rapidshare...I will decide in the next days after testing some more the one that I have now... In case I need to flash the dopod one, do I need to remap the keyboard as I remember to have read somewhere or it's just flash it/use it? If yes can you point me out where to get directions or if short can you post how you did?
Regards
mariner said:
Thanks for sharing your experience with me...
Click to expand...
Click to collapse
I thought it had been agreed that SOD was caused by the messenging app (mail) set to check mail regularly. I had SOD when this was set and also when I had it checking an exchange account (Mail2web).
I check mail manualy now and my tytn has been extremely stable. I have not had SOD for months.
using LVSW 19-5-07 (elf edition)
Looks like the Toshiba G900 is having sleep of death issues too. So, I think it is pretty safe to that Olipro is not the cause of the SOD. Hopefully someone can nail down the real cause of SOD soon as it seems to be a widespread issue that doesn't seem to have any rhyme or reason.
smads said:
I thought it had been agreed that SOD was caused by the messenging app (mail) set to check mail regularly. I had SOD when this was set and also when I had it checking an exchange account (Mail2web).
I check mail manualy now and my tytn has been extremely stable. I have not had SOD for months.
using LVSW 19-5-07 (elf edition)
Click to expand...
Click to collapse
Personally, my ollllld SOD issues were SD card related, exchange with retrieving items as they arrive has worked flawlessly for months now, I dont think there is one determining factor for the SOD's.
Since I see this thread is about Olipro, where is he nowdays, I never see him on the board, but then again I dont visit the other sections much.
One thing I noticed and it could be a coincidence...my SOD went away after I got rid of (unchecked) encryption. Just a thought...
I had a few SOD's back on Black 1.2 and I believe that was a Storage Card/apps issue. With Black Majik, I've never had a SOD and I run the same apps in the same manner I did from 1.2 with a few minor exceptions. One, I got rid of WAD. As great as it looks, it slows the device down and was a constant SR issue. Most of my main apps that need to constantly run I have stored to the device and NOT the storage card, so that too may be a hint as to why the SOD may occur. Do I think we'll ever narrow it down to a specific thing? No, cause I beleive many different things can cause it, and as all of our devices are unique, then it's up to each of us to work-out the SOD issue on our own with some of these threads as advice. I'm happy with my setup now and the SOD is a non issue.
The HTC Rom branded as pre-release (OS Build 1238 so far i remember) is known to have SOD.
Just avoid this rom and flash to another.
fun_key said:
The HTC Rom branded as pre-release (OS Build 1238 so far i remember) is known to have SOD.
Just avoid this rom and flash to another.
Click to expand...
Click to collapse
Thanks for the hint, I will give the dopod one a try...or do you have anyone better to suggest???
part 1
http://tom-love.net/ROM/TRINITY/HTC_...6.PV.part1.rar
part 2
http://www.pdaviet.com/attachment.ph...d=1187 871164
pass DAVIET
http://www.pdaviet.com/showthread.php?t=12212&page=2
one more rom from pdaviet
this rom still have bt bug
with wireless audio??
whats the bt bug?
tsaurus said:
whats the bt bug?
Click to expand...
Click to collapse
the problem is the stops when you listening music
the sounds via bluetooth disapears in 1 minute song u have 2 times or more of drops
mmm ?
Never had this kind of bug yet with ROM v3.00.07.14... BT stéréo (a2dp) works perfectly for me.
Moreover, I had more sound cut with lwsv 1.0.1.1 rom.
i dont see anything in the changelog relating to the many bugs i found in 15, to my count there are now about 6 or 7 reported bugs of which 3 require hard-reset to recover from. i have stepped over to Bepe's builds and have no problems so far.
yape me to change to bepe
Me too. I have no time to try it out without changelog just to see the "hanging at boot bug requiring hard reset" again :-(
Sorry, I love PDAVIET Roms (really complete and nice programs included) but without changelog its difficult to convince me to switch away from Bepe.
kind regards
wondering if this version is any faster?
Changelog
Translated the changelog with some help from vietnamese freinds(still needed to geuss some stuff)
PDAVIET says, this is a clean rom, they hope this fixed the reported problems with the software
CE OS 5.2.1620 Build 18125.0.4.2
uses the WM6.0 classic theme
updated to HTC_Touch_UI_HOME_2_0_720719_Kaiser (extracted from the kaiser ROM)
PP=6Mb, free RAM on boot 25-26Mb
EDIT:
Judging from the screenshots this version could actually fix all the previous problems (it looks like batterystatus was removed for now)
I advice everyone who is willing and was having problems to run some tests
I would be willing to try this rom out to test whether probs are fixed, IF, it didnt have the 3g dialer that is on it at the moment. The problem with this dialer skin and some of the others like this is that even if you disable the 3g dialer the standard dialer is still mucked up with the logo and stuff.
The reason i like to use the original dialer is that i like to be able to scroll and click on a contact and then choose which no to phone them on. The 3g dialers when you click the name it dials the last dialed no for them and does not give you the option.
Anyone know if the phone pad in landscape bug its ok know?
MJRL said:
Anyone know if the phone pad in landscape bug its ok know?
Click to expand...
Click to collapse
Yes. From "HTC_Trinity_3.00.07.13.PV" until now "HTC_Trinity_3.00.07.16.PV", it's ok.
jotam said:
Yes. From "HTC_Trinity_3.00.07.13.PV" until now "HTC_Trinity_3.00.07.16.PV", it's ok.
Click to expand...
Click to collapse
I've tried 13 and have bug. Was the last pdaviet rom that i've tried.
http://forum.xda-developers.com/showpost.php?p=1421661&postcount=20
http://forum.xda-developers.com/showpost.php?p=1428712&postcount=34
Maybe someone need to upload it to rapidshare or else. Can't download from the 1st post.
damn...
color is blue, theme sux
when I try to set background image, the image is waaaaay to bright and transparent than it should be...
Any idea how to fix it?
Thanks!
Can someone confirm if the bug of hanging screen at boot still exist if Calender is synced?
Thanks
Hi,
rjefferis said:
The reason i like to use the original dialer is that i like to be able to scroll and click on a contact and then choose which no to phone them on. The 3g dialers when you click the name it dials the last dialed no for them and does not give you the option.
Click to expand...
Click to collapse
Just for info, the 3G Dialer from Duronmarcel http://forum.xda-developers.com/showthread.php?t=321605 works fine.
You start typing the name, click on the name to see the number (2 line display) and can then change the number to be called using left and right key of D-Pad. I've cooked it into my ROM and at least with my ROM it works that way. Nice design and also working in landscape mode.
Bye.
no more calendar BUG!!!
yay!
can anyone put the links of the ROM v3.00.07.16 PDAVIET, because the links of the first page are broken.
tks
I need beta testers for this Beta 1 version of the new ROM I'm working on.
There will be a lot of new stuffs in the final release, so it means a lot of work and complications, so I will make it step by step.
This new version will be a mix of all the best components among Hermes ROMs and new ROMs from other devices. This Beta 1 is a basic ROM and will be quite similar to the final Lite version, it is meant to test the stability of this new build.
Unfortunately I wasn't able to make it "real big storage" like Bepe did, I spent hours and hours working on it, without success, so if anyone managed to make a real big storage ROM please let me know!
I'm listening to your feedback!
Download:
http://rapidshare.com/files/63079021/Schaps_WM6Pro_WWE_4.00_Beta1.exe.html
whoot! Downloading
Downloading
Excelent! will report soon...
I can't wait!!!
I feel like a kid getting ready to open a present. Will report back with my findings.
Duper
So far very fast, I mean VERY fast, I loaded it out with my usual setup (free storage around 40 MB) and it still is a burner, no issues with stability (yet). I'll see how it holds up when I setup touchflo and work with my corp network.
Wooohooooo !!!
Going to try it cant wait!!!
I will backup all my stuff and download
Downloading
Downloading.............I will try and report. SIR! THANK YOU!
Is this build fully functional IE: phone, MMS, Email, TExt, ect
crupp said:
Is this build fully functional IE: phone, MMS, Email, TExt, ect
Click to expand...
Click to collapse
yep but the only extra (that I can see) is advanced config, no audio manager, home, or any of the extras, you will also need your operator settings for internet access. All basic functions work
Guys before this thread get any bigger i just wanted to make sure everyone is aware that this is a BETA. So there are bound to be bugs in it and as already stated this is the very bare minimum ROM.
So Therefore:
NO MOANING THAT SOMETHING ISNT WORKING RIGHT OR ASKING WHY SOMETHING ISNT THERE!
Bug reports with instructions on how to reproduce - Yes
Pointless Moaning - No
Sound Settings
Schaps
I cannot change my settings in Sounds & Notifications. After making the change I click OK and it just flashes hour glass and then changes back to default settings. I can't get out of the screen without a reset.
Duper
Duper00 said:
Schaps
I cannot change my settings in Sounds & Notifications. After making the change I click OK and it just flashes hour glass and then changes back to default settings. I can't get out of the screen without a reset.
Duper
Click to expand...
Click to collapse
I had this problem in some other builds
i will test this problem on my hermes
i have the same problem to exit from settings
Duper00 said:
Schaps
I cannot change my settings in Sounds & Notifications. After making the change I click OK and it just flashes hour glass and then changes back to default settings. I can't get out of the screen without a reset.
Duper
Click to expand...
Click to collapse
I can confirm this same thing is happening. You can get out of the sounds and notif settings by hitting start and today but settings revert back to original. They do not save and exit. This was the first bug that I checked out. Going to do a hard reset to see if it will fix it. Doubt it. I am here for the testing. I love it. Can't test 3G till tomorow on my way to work.
Update: Hard reset did not fix it.
Direct3D
I am testing ... very fast... I loaded few proggies and still fast. Iam wondering if it is all possible to cook in MS Direct3D an X file so it will be able to trigger and open Google Navigator.
There seem to be some issues with activesync. I don't know what it could be but it seems that it hangs sometimes while doing multiple things during activesync and won't stop when you disconnect. I have added WMP today pluggin, VJ Candela, Simulsays Visual Voicemail, the new LiveSearch, and Shogun's palm threaded app.
Oh yeah: Its very fast. Even after what I have put on there so far.
Yay for Schaps! Welcome back, I think I speak for everyone when I say we missed you and your ROM's.
Whilst I would love to help test it I am going to have to sit and wait on the sidelines I'm afraid. I use my phone heavily for work and it needs to be stable and with full functionality.
When you release the Full edition in an Release Candidate version I'll pop by and help with the final testing.
Unless of course there is a way I can image my phone so that I can get it back to the exact way it is now after testing?
Regards and waiting in eager anticipation.
Starfury
Mosquito said:
I have the same problem to exit from settings
Click to expand...
Click to collapse
Me too, same Problem
I can test it, but someone can mirror the file, please?
I tried to mess around with advanced config tool but had no success listening to music on headset without blanks or skips every time i moved my head...
then i did the HT280 firmware update i just found in the forum but its worst
any of u guys using HT820 and happy with it ?
i remember having to struggle on every HTC to get this working...
seems like this will be never fixed by htc
hope some of you have same material and can post your settings and feedback on your situation
thx
Yep have the Moto too, great headset (a little uncomfortable at times but great audio and features)
No issues here with mine, though I manually changed bitpool settings.
I have found that Advanced Config can cause issues on the Rhodium so adv ise not using it for now, just change your required settings manually.
I'll try and dig out my settings during the week and post back.
If you have manually installed AC then try un-installing and testing.
Cheers,
Beasty
thx for your answer mate, thx for your time to post yours settings eventually
actually i cant uninstall Advanced Config : it s in the custom ROM im using...
i just flashed latest version and didnt install tom tom yet in case it was the problem
but seems like it isnt...as usual with HTC : stereo BT out the box is ****
tnt23 said:
thx for your answer mate, thx for your time to post yours settings
actually i cant uninstall Advanced Config : it was in the custom ROM im using...
i think i got a problem with BTstack since tomtom 7install
i renamed or recopied older versions of those corrupted files...but still i cant add a new device anymore...
Click to expand...
Click to collapse
I am also using NRGZ build, but have not launched AC.
Once I dig out my settings (2moro if I get a chance) I'll post, you may have to hard reset though. I advise not running AC untill we have an updated version.
Also TT7, my version does not replace the BT files, I post the version number for that 2 moro too.
Cheers,
Beasty
ok man ill wont start AC on this new flash yet...
how about WGVA Tweak ?
I am using that headset on my stock Telus TP2 with no problems and have not done any regestry edits to Bluetooth.
tnt23 said:
ok man ill wont start AC on this new flash yet...
how about WGVA Tweak ?
Click to expand...
Click to collapse
Current Bitpool and MaxBitpool I have set to 1e (30) which is the same setting I used on my Universal for years without issue.
Have played 3 songs this am without any lag or skipping using Touch Flo Player. CorePlayer also works flawlessly, haven't tested and don't use M$ Media Player.
HDTweak and other tweak tools I don't like to use so can not comment as most will apply a default setting for certain items. I prefer to only modify what "I" want.
Cheers,
Beasty