Related
hey,
i have searched a long time but have not found anything about my problem. i tried to use my camera for making videos. the sound of that videos is very low, "to low". I don´t know how to get it louder. i think its not a hardware problem because the sound of notes is very loud.
thanks for every reply
Jimmie
Try Start->Settings->System->Microphone AGC->Enable
Havent tried it, but give it a go
i did so before. but nothing changed
upgrade ur device to the latest 1.40 rom...that should solve it...i had the same prob and now its even too loud
If you notice, he's using a German rom. There are no 1.40 German roms out yet, so that may prove difficult.
that´s bad,
but there must be a solution for this problem. i hope to find or get it next time.
thanks for your replys
and please go on
I don't have the smalest idea if this will help or screw up your camera app. even more, but you could try to run one of the camera cab's that's in the 1.40 extended Rom
BA_Camera_Driver_Patch.sa.CAB
Or look for others here
Do a backup before you try.
the forum is so large. i can´t find the right thread.
how to make a backup and install the new .cab file?
is it possible to remove this to get back to the old one if the new one will not function?
http://www.spritesoftware.com/en/personal/products/windows_mobile/pocket_pc.htm
This will make a backup of your current settings.
BackUp
Install Cab look at 6.
If it dont work, just restore from your backup
Sound could be solved by this little small app
hey
what´s the function of this app and how do i install/ remove it?
thanks for your help
ramram
thanks a lot. this app is fantastic. with this app it ´s possible to change the volume of mic and also change treble and bass boost of the headphone
thanks
Yes, thanks for the app!!
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Which version are you using (of phonealarm)
No problems here with version 1.58 build 100. Using latest LVSW.
Try running the latest beta version (available on the pocketmax forum)
000-000-0000 is a skype. Unfortunately some networks still allow that number to come in. I got one myself today. Ridiculous because if you block it no one from skype will be able to call you.
I have pa 1.58 (build 100). Can you get a skype number if you don't use skype or have there software installed.
Still getting the missed calls from (000)000-0000. The phone doesnt ring just a notification of missed call. Happens 3-4 time a day now. Anyone have any ideas.
chrisryn said:
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Click to expand...
Click to collapse
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Am using PA 1.6 b9 on black 2.0 no problems.
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
lanwarrior said:
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
Click to expand...
Click to collapse
Same as the final release, 30 days.
Have you tried a different skin? I've read that there are some skins that will work with WM6 and some not, i just can't remember the name ;(
Some people also reported that if you set the startupdelay in the pa-config (~10sec.) helps, followed buy one two or sometimes even three reboots....
crazyC said:
Am using PA 1.6 b9 on black 2.0 no problems.
Click to expand...
Click to collapse
I just tried 1.60B9 again and still no luck.
but i am sure i saw some post, where people stated that PA works fine with LVSW. Please can someone confirm that?
Starting to feel like a stupid easter lamb.
chaos42 said:
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Click to expand...
Click to collapse
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
jcespi2005 said:
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
Click to expand...
Click to collapse
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
chaos42 said:
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
Click to expand...
Click to collapse
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
jcespi2005 said:
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
Click to expand...
Click to collapse
and exactly this spirit was preventing me from throwing my tytn out of the window back in august'06 when i bought it
I was a palmOS user for almost 10 years before, and without the help of this forum and all the people here i'am pretty sure i would have gone mad about my ppc phone.
xda-developers you rock!!!
i have no issue until v1.60 beta 6.
beta 7 > got problems. pain. pain.
couldnt get it to play nice with cingular black 2.02. WOn't install at all...
Hi guys..
I did do a search for this on the forum, with no result.
Since the flash of WM6 to my HTC TyTn, there was a big drop in received call volume.. Even when i increase the volume to max its sometimes hard to hear what the other person is saying, and compaired to a wm5 rom its a little softer.. Is there a registry tweak to maybe increase received call volume?
This is mainly coz in some noise filled areas i use to be able to hear the other person, but since wm6, not so much anymore..
Thanx guys..
*PS, if this is in your eyes another lame post, feel free to delete! no cares!*
EDIT:
Ok, im just another noob now.. Just went on searching on google and found the answer on this forum through google.. Why didnt it show up on the forum search????????
http://forum.xda-developers.com/archive/index.php/t-297493.html
I couldn't agree more and the speakerphone volume is pathetic..
If theres a fix then I have obviously missed it..
look at the link.. there is a little registry tweak.. i tested it.. it works, but not to the best, its a little louder..
Also looks like the setting will be lost during softrest or hardrest...
Just curious .. what ROM are folks using? It seems to me that the new CUSTEL ROM is a bit louder than the other WM6 ROMS I have tried (though it may be my imagination).
I most recently came from Black 3.01 ... then to LSVW 05/07 ... now am using CUSTEL 2.0. All have their pros and cons ... but I think CUSTEL's may not have this volume issue.
or, it is all in my imagination?
I agree with the initial premise, however, that the upgrade to WM6 seems to have degraded incoming call volume.
Hey, I've used Custel's V1.3 and am currently using a modified LVSW. I've noticed Custel's has a louder incall volume - had to keep the phone away from my ear! It seems to be this setaccusticsparam file - it was mentioned before with people that had Hermes that were TOO loud. I *Think* the file is in the ExtRom portion of the ROM.
BorisTheSpider said:
Hey, I've used Custel's V1.3 and am currently using a modified LVSW. I've noticed Custel's has a louder incall volume - had to keep the phone away from my ear! It seems to be this setaccusticsparam file - it was mentioned before with people that had Hermes that were TOO loud. I *Think* the file is in the ExtRom portion of the ROM.
Click to expand...
Click to collapse
Is this file in all ExtRoms?
Anyways, i tryed the fix in he first post that i updated in the link.. Now my phone is nice and loud, had an hour long talk with one of my friends last night and i had to either keep the phone away from my ear or make it softer.. The registry tweak worked.. will see if it sticks on the next softrest i have to make.. Rom is very stable, havent rest in over a week now..
which tweak?
the posting cited has two diff tweaks in it. Which one helped? Or did you do both?
oh man.. sorry.. i used this one..
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory = 0
The setting was on "2", changed it to "0" and this worked for me.. Thing is damn loud again..
I checked out the other tweak aswell but that was standard on my phone.. So no change on the second one..
I'm using Black 3.0.1 now, it's the only one I can use. The others were all way too loud.
Thanks for posting this. before the newest Cingular release of their new WM5 rom I had to go to bluetooth because I couldn't hear much of anything on the phone. I did with the newest rom, but it seems to have gone away with black, so I will welcome Custel's rom even more since it does this.
This has worked for me also, changing to 0 from 2 is the trick. What about the bluetooth volume? i have a JX10 and i would love it to be louder thou
This worked for my in call volume too.
Anyone know of a fix for the bt headset low volume issued?
Thanks
[email protected]_4ngel said:
oh man.. sorry.. i used this one..
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory = 0
Click to expand...
Click to collapse
I also suffer from this problem so grateful for the fix. Can anyone tell me how to change the registry on my TyTN? Thanks.
bobbyelliott said:
I also suffer from this problem so grateful for the fix. Can anyone tell me how to change the registry on my TyTN? Thanks.
Click to expand...
Click to collapse
use a registry editor like resco or commander. easy to find with a search.
part 1
http://tom-love.net/ROM/TRINITY/HTC_...6.PV.part1.rar
part 2
http://www.pdaviet.com/attachment.ph...d=1187 871164
pass DAVIET
http://www.pdaviet.com/showthread.php?t=12212&page=2
one more rom from pdaviet
this rom still have bt bug
with wireless audio??
whats the bt bug?
tsaurus said:
whats the bt bug?
Click to expand...
Click to collapse
the problem is the stops when you listening music
the sounds via bluetooth disapears in 1 minute song u have 2 times or more of drops
mmm ?
Never had this kind of bug yet with ROM v3.00.07.14... BT stéréo (a2dp) works perfectly for me.
Moreover, I had more sound cut with lwsv 1.0.1.1 rom.
i dont see anything in the changelog relating to the many bugs i found in 15, to my count there are now about 6 or 7 reported bugs of which 3 require hard-reset to recover from. i have stepped over to Bepe's builds and have no problems so far.
yape me to change to bepe
Me too. I have no time to try it out without changelog just to see the "hanging at boot bug requiring hard reset" again :-(
Sorry, I love PDAVIET Roms (really complete and nice programs included) but without changelog its difficult to convince me to switch away from Bepe.
kind regards
wondering if this version is any faster?
Changelog
Translated the changelog with some help from vietnamese freinds(still needed to geuss some stuff)
PDAVIET says, this is a clean rom, they hope this fixed the reported problems with the software
CE OS 5.2.1620 Build 18125.0.4.2
uses the WM6.0 classic theme
updated to HTC_Touch_UI_HOME_2_0_720719_Kaiser (extracted from the kaiser ROM)
PP=6Mb, free RAM on boot 25-26Mb
EDIT:
Judging from the screenshots this version could actually fix all the previous problems (it looks like batterystatus was removed for now)
I advice everyone who is willing and was having problems to run some tests
I would be willing to try this rom out to test whether probs are fixed, IF, it didnt have the 3g dialer that is on it at the moment. The problem with this dialer skin and some of the others like this is that even if you disable the 3g dialer the standard dialer is still mucked up with the logo and stuff.
The reason i like to use the original dialer is that i like to be able to scroll and click on a contact and then choose which no to phone them on. The 3g dialers when you click the name it dials the last dialed no for them and does not give you the option.
Anyone know if the phone pad in landscape bug its ok know?
MJRL said:
Anyone know if the phone pad in landscape bug its ok know?
Click to expand...
Click to collapse
Yes. From "HTC_Trinity_3.00.07.13.PV" until now "HTC_Trinity_3.00.07.16.PV", it's ok.
jotam said:
Yes. From "HTC_Trinity_3.00.07.13.PV" until now "HTC_Trinity_3.00.07.16.PV", it's ok.
Click to expand...
Click to collapse
I've tried 13 and have bug. Was the last pdaviet rom that i've tried.
http://forum.xda-developers.com/showpost.php?p=1421661&postcount=20
http://forum.xda-developers.com/showpost.php?p=1428712&postcount=34
Maybe someone need to upload it to rapidshare or else. Can't download from the 1st post.
damn...
color is blue, theme sux
when I try to set background image, the image is waaaaay to bright and transparent than it should be...
Any idea how to fix it?
Thanks!
Can someone confirm if the bug of hanging screen at boot still exist if Calender is synced?
Thanks
Hi,
rjefferis said:
The reason i like to use the original dialer is that i like to be able to scroll and click on a contact and then choose which no to phone them on. The 3g dialers when you click the name it dials the last dialed no for them and does not give you the option.
Click to expand...
Click to collapse
Just for info, the 3G Dialer from Duronmarcel http://forum.xda-developers.com/showthread.php?t=321605 works fine.
You start typing the name, click on the name to see the number (2 line display) and can then change the number to be called using left and right key of D-Pad. I've cooked it into my ROM and at least with my ROM it works that way. Nice design and also working in landscape mode.
Bye.
no more calendar BUG!!!
yay!
can anyone put the links of the ROM v3.00.07.16 PDAVIET, because the links of the first page are broken.
tks
Hey folks,
This is a completely new build, with all the new changes baked in. We wanted to do a semi-official test release to collect bugs and hopefully do a formal official release with everything settled. The main pain point is the CSV files (see pre-install prep).
So a brief overview:
New acoustic routing code baked in. Should fix most if not all audio routing problems, and will provide more debugging if stuff does go wrong. Also allows for more granular tweaking, see the CSV files.
GPS fixes for GB - GPS not only works in GB now, but it doesn't kill sleep! I was able to use GPS, get a solid lock, and put the device to sleep no problem.
BT should work & well with the new acoustic code. Post results.
RHOD users now have a choice of kernels. .35+ all have the new acoustic - so .35, .39, 3.0 and 3.1 are all fair game now... This is bundled with .27!!
Keep in mind, autobuild .27 kernels will produce no audio in this build... Obviously the bundled kernel will work, and the absolute newest .27 autobuild kernel does work now - Feb.27 2012 or newer.
rootfs tweaks - first, it will detect which kernel you're on (.27 or .35+) and automatically apply the correct firmware. Second, is it will always copy/extract the modules... failures there were getting annoying, and this is surefire if brute-force...
Few Easter egg apk's...
Probably a lot I'm forgetting, this might change
Pre-Install Prep REQUIRED!!!
This step is crucial, and I forgot all about it! You must copy all of the *.CSV file from your WinMo ROM - these are in the \Windows\ directory. There's a very easy way to do this. It involves the Total Commander app for WinMo (Direct Link for the perpetually lazy...) (included in EnergyROM and others probably).
Now you're in Total Commander looking at your \Windows\ directory. Whew... lots of files. Fear not! Hit the "CTRL" button, then the green "Plus" button. This opens the Select/Unselect files dialog. Put in *.csv, press "select" and voila. All CSV files are selected. Now - File -> Copy/Move -> I want you to copy these (should be 10) files to the ROOT of your SD card. No folders!!! This is hardset right now, until we get it all implemented into the build properly. Thanks!
Install
Assuming you've done the pre-install prep; this is installed just like the other XDAndroid builds - grab your startup.txt (don't forget rel_path= if you don't have it at the root of the SD!), ts-calibration and boot!
Download
Caveats:
Audio stutters every 10sec. The only fix I've heard is using a kernel from G3rmo (unfortunately it is old), or
Code:
su
kill -9 28
Which kills the [battery] process. I'm sure this will have negative effects on the battery meter/battery life...
SD Card not working...? "Waiting for SD Card" appearing on boot...? Try putting this command in your startup.txt
Code:
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
See gummbah30's post reminding us of these commands.
SD Card has partitions? (If you used a non-XDAndroid build the answer is YES) Then you need to add "no_partitions" to your startup.txt. Between the quotes on the set cmdline line. Do not put it on its own line, it goes in between the quotes! Make sure there is one space between each item.
BT might still be flaky
The CSV files from my BLAC100 are attached for the lazy. I'd like to gather CSV's from each RHOD, I'm curious if any ROM devs have changed them out either... This could get interesting. If you folks don't mind, post up your CSV's, point out differences with mine, etc... We're trying to figure out how to unify these, if possible! Thanks!
Keyboard tiny/unusable? Either change the IME (long press on the input box) Get rid of it! I've heard "Hackers Keyboard" is a good alternative - many options. There's also "Better Keyboard", Swype, etc... Side load the APK using AndroidApps, adb install, etc.
Please post back any issues, enjoy!
GBX0C Changelog
Camcorder: Now works (tested on rhodium).
Acoustic: Bug-fix : correct random loss of dual(rear)-mic.
MMS: Bug-fix: Slides with zero duration on Sprint.
Gps: Bug-fix: Init/de-init sequence fix (correct gps not starting up after being unchecked in Settings).
Gps: Bug-fix: End gps session with a correct rpc call (relevant to amss6125 devices).
Gps: Bug-fix: Don't send delayed position requests after session has ended (possibly relevant to Navigation issues).
Gps: New feature: Xtra (aGPS) -> verified to work on rhodium/cdma raph.
X1 specific: Screen rotation patch.
Added tytung's GPS injector app to AndroidApps\Other as well as updating/cleaning up some apps in AndroidApps.
Modified rootfs for newest apsta firmware & wifi firmware - wifi tethering now works flawlessly in the newest kernels! .27 is still bundled for the record...
logcat attached
just like to say speakers when making a call works........loud rear speakers (speakerphone) don't work nor does sound in touch selection when going threw screen selection and playing music does not work also.....hope this helps
welard said:
just like to say speakers when making a call works........loud rear speakers (speakerphone) don't work nor does sound in touch selection when going threw screen selection and playing music does not work also.....hope this helps
Click to expand...
Click to collapse
Interesting, does any sound work...? Does it play thru the earpiece instead of the rear speaker? What about previewing ringtones? Next time you pull a logcat, make sure to use -v time. Using GetLogs makes it much easier .
Thanks for testing btw. The more the merrier! If we're going to make this change global, we want to make sure no devices are left in the dust. So it's up to you guys to test and ensure that it works properly! If it doesn't, we'll try to fix it.
If anyone feels like hopping on #xdandroid on freenode while testing, that would be great! Thanks again!
i attached the file i found on sd card after pulling the logs with getlogs. i hope this is the file you wanted.
i just added following commands to my startup, because i cant boot without them:
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
am20033 said:
i attached the file i found on sd card after pulling the logs with getlogs. i hope this is the file you wanted.
i just added following commands to my startup, because i cant boot without them:
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
Click to expand...
Click to collapse
Those commands are necessary if you have a SD card that doesn't play nicely. If you need 'em, put 'em in.
Thanks for the logs, I'll pass them on. Anything you can say about 'em? What happened during the logs...? Please be as specific as possible. The more information, the better.
Bump...
I made a mistake. Messed up bad folks! I forgot an extremely crucial step... See the first post! Pre-install Prep .
am20033 already has given pretty good feedback, once having done this step. So send it through the ringer guys, c'mon!
arrrghhh said:
Bump...
I made a mistake. Messed up bad folks! I forgot an extremely crucial step... See the first post! Pre-install Prep .
am20033 already has given pretty good feedback, once having done this step. So send it through the ringer guys, c'mon!
Click to expand...
Click to collapse
wooooow......thats all i can say......loudspeaker in call works perfect.... incall audio perfect.......touchsceen click works well......overall system louder......have not tested music but in (sound settings)....ringtone, media and alarm works well...bluetooth audio headset has lots of background noise u can hear the other person but not very well but audio is rooted to bt headset.....will test further and report back asap......
p.s. there are 5 c.s.v file in window mobile on blackstone....ive re-check and found 5.....if anyone find more please let me know, but far as i know there is 5 not 10.....thanks
welard said:
wooooow......thats all i can say......loudspeaker in call works perfect.... incall audio perfect.......touchsceen click works well......overall system louder......have not tested music but in (sound settings)....ringtone, media and alarm works well...bluetooth audio headset has lots of background noise u can hear the other person but not very well but audio is rooted to bt headset.....will test further and report back asap......
p.s. there are 5 c.s.v file in window mobile on blackstone....ive re-check and found 5.....if anyone find more please let me know, but far as i know there is 5 not 10.....thanks
Click to expand...
Click to collapse
Good deal! Some headsets seem to work better than others - we'll have to work on that once everything has settled. Glad everything else is working well!
As for there only being 5 CSV's, that might be true for Blackstone. What WinMo ROM are you on...? Perhaps some other users can verify. On my RHOD running EnergyROM there's definitely 10 CSV files in \Windows\. I might ask everyone post theirs so we can detect any differences - so if anyone would like to post all the CSV's they have in a zip file here that would be great!
arrrghhh said:
Good deal! Some headsets seem to work better than others - we'll have to work on that once everything has settled. Glad everything else is working well!
As for there only being 5 CSV's, that might be true for Blackstone. What WinMo ROM are you on...? Perhaps some other users can verify. On my RHOD running EnergyROM there's definitely 10 CSV files in \Windows\. I might ask everyone post theirs so we can detect any differences - so if anyone would like to post all the CSV's they have in a zip file here that would be great!
Click to expand...
Click to collapse
im on window 6.5 kwbr rom,....im not sure if files are different than in the orignal 6.1 for blackstone........thanks
welard said:
im on window 6.5 kwbr rom,....im not sure if files are different than in the orignal 6.1 for blackstone........thanks
Click to expand...
Click to collapse
Post those CSV's if you could!
arrrghhh said:
Post those CSV's if you could!
Click to expand...
Click to collapse
hear are my csv's......thanks...
arrrghhh said:
Post those CSV's if you could!
Click to expand...
Click to collapse
Thank's Arrrghhh , that is my best news today .
I'm a former HD owner and today i have a HD mini Photon , my current Android ROM is working very well .
The only real problem for me is the audio routing . Could you give me some help to test this in Photon? I can try to change my ROM in order to apply your fix. Don't worry if i don't have success doing that , i know devices are not the same and i don't disturb you .
Because this is HD forum if you want you can PM me.
Thank's a lot
cbolumar said:
Thank's Arrrghhh , that is my best news today .
I'm a former HD owner and today i have a HD mini Photon , my current Android ROM is working very well .
The only real problem for me is the audio routing . Could you give me some help to test this in Photon? I can try to change my ROM in order to apply your fix. Don't worry if i don't have success doing that , i know devices are not the same and i don't disturb you .
Because this is HD forum if you want you can PM me.
Thank's a lot
Click to expand...
Click to collapse
If you're on a native Android device and you're having audio routing problems I would talk to the developer of the ROM. If you re-read the first post, I detail why we have audio routing problems to day, and why this test build fixes those issues.
Your issue is completely different and entirely unique compared to our woes. Sorry.
arrrghhh said:
If you're on a native Android device and you're having audio routing problems I would talk to the developer of the ROM. If you re-read the first post, I detail why we have audio routing problems to day, and why this test build fixes those issues.
Your issue is completely different and entirely unique compared to our woes. Sorry.
Click to expand...
Click to collapse
Thank's arrrghhh , Photon is a WM 6.5 device (maybe the last HTC WM device) and the issue is the same I had in my blackstone for two years. (BT pairing but not audio ) it was my bigger problem there and with photon .... having the same problem..
I'm reading some times the blackstone thread looking for some light about this issue and today i found your thread. Trust me , the issue is the same and the way to resolve it must be similar.
I had success booting android HD blackstone roms in photon (more or less) and i will try to test your build. at the moment the booting animation start well but never end.
I'm changing some modules to obtain a bootable build but i don't know which libs or kernel modules are you changing here.
Thank's
cbolumar said:
Thank's arrrghhh , Photon is a WM 6.5 device (maybe the last HTC WM device) and the issue is the same I had in my blackstone for two years. (BT pairing but not audio ) it was my bigger problem there and with photon .... having the same problem..
I'm reading some times the blackstone thread looking for some light about this issue and today i found your thread. Trust me , the issue is the same and the way to resolve it must be similar.
I had success booting android HD blackstone roms in photon (more or less) and i will try to test your build. at the moment the booting animation start well but never end.
I'm changing some modules to obtain a bootable build but i don't know which libs or kernel modules are you changing here.
Thank's
Click to expand...
Click to collapse
Oh I see.
Others have this same problem...? I'm wondering if it's your headset, or the port. Do you know how audio routing works on the port for the Mini? Is it a kernel-only affair, or does userland effect it...?
arrrghhh said:
Oh I see.
Others have this same problem...? I'm wondering if it's your headset, or the port. Do you know how audio routing works on the port for the Mini? Is it a kernel-only affair, or does userland effect it...?
Click to expand...
Click to collapse
Is a general problem , I don't know if the problem is only in the kernel but i can give you some issues we have with the sound:
- the stereo wired headset sound only works if we use headset with micro , if we use headset without micro the sound is mono.
- The fm radio sound only works if we start de FM radio in WM before run haret , in other case we have only 5 seconds sound in Android FM radio, after 5 seconds the sound stops suddenly.
- the loudspeaker and sound in general in incoming calls is very low.
- The Bluetooth headset and the bluetooth hand free paired without problems but not redirect the sound.
I think the problem is not so different you want fix here in blackstone.
cbolumar said:
Is a general problem , I don't know if the problem is only in the kernel but i can give you some issues we have with the sound:
- the stereo wired headset sound only works if we use headset with micro , if we use headset without micro the sound is mono.
- The fm radio sound only works if we start de FM radio in WM before run haret , in other case we have only 5 seconds sound in Android FM radio, after 5 seconds the sound stops suddenly.
- the loudspeaker and sound in general in incoming calls is very low.
- The Bluetooth headset and the bluetooth hand free paired without problems but not redirect the sound.
I think the problem is not so different you want fix here in blackstone.
Click to expand...
Click to collapse
The fixes here apply to MSM7k devices. I'm not sure what you would need to port it to other devices... pretty sure our kernel would not work on your phone. That's going to be the hurdle. I would encourage you to analyze the userland stuff tho - that certainly might be useful to you.
arrrghhh said:
The fixes here apply to MSM7k devices. I'm not sure what you would need to port it to other devices... pretty sure our kernel would not work on your phone. That's going to be the hurdle. I would encourage you to analyze the userland stuff tho - that certainly might be useful to you.
Click to expand...
Click to collapse
Thank's arrrghhh , the hD mini have the MSM7227 processor, i will follow here your work.
cbolumar said:
Thank's arrrghhh , the hD mini have the MSM7227 processor, i will follow here your work.
Click to expand...
Click to collapse
Don't misconstrue, I haven't done any of the actual development on this acoustic code .
See Jerome's tree if you want to see where this all started. A few others have cloned his tree and made some modifications. We're still working out the kinks. Perhaps it can help your port as well...
Like I said earlier, I am betting the userland stuff will work for you folks without a ton of changes (don't know for sure!). The kernel stuff for this new acoustic will need to be ported - our kernel will not work on your device.