Hi guys..
I did do a search for this on the forum, with no result.
Since the flash of WM6 to my HTC TyTn, there was a big drop in received call volume.. Even when i increase the volume to max its sometimes hard to hear what the other person is saying, and compaired to a wm5 rom its a little softer.. Is there a registry tweak to maybe increase received call volume?
This is mainly coz in some noise filled areas i use to be able to hear the other person, but since wm6, not so much anymore..
Thanx guys..
*PS, if this is in your eyes another lame post, feel free to delete! no cares!*
EDIT:
Ok, im just another noob now.. Just went on searching on google and found the answer on this forum through google.. Why didnt it show up on the forum search????????
http://forum.xda-developers.com/archive/index.php/t-297493.html
I couldn't agree more and the speakerphone volume is pathetic..
If theres a fix then I have obviously missed it..
look at the link.. there is a little registry tweak.. i tested it.. it works, but not to the best, its a little louder..
Also looks like the setting will be lost during softrest or hardrest...
Just curious .. what ROM are folks using? It seems to me that the new CUSTEL ROM is a bit louder than the other WM6 ROMS I have tried (though it may be my imagination).
I most recently came from Black 3.01 ... then to LSVW 05/07 ... now am using CUSTEL 2.0. All have their pros and cons ... but I think CUSTEL's may not have this volume issue.
or, it is all in my imagination?
I agree with the initial premise, however, that the upgrade to WM6 seems to have degraded incoming call volume.
Hey, I've used Custel's V1.3 and am currently using a modified LVSW. I've noticed Custel's has a louder incall volume - had to keep the phone away from my ear! It seems to be this setaccusticsparam file - it was mentioned before with people that had Hermes that were TOO loud. I *Think* the file is in the ExtRom portion of the ROM.
BorisTheSpider said:
Hey, I've used Custel's V1.3 and am currently using a modified LVSW. I've noticed Custel's has a louder incall volume - had to keep the phone away from my ear! It seems to be this setaccusticsparam file - it was mentioned before with people that had Hermes that were TOO loud. I *Think* the file is in the ExtRom portion of the ROM.
Click to expand...
Click to collapse
Is this file in all ExtRoms?
Anyways, i tryed the fix in he first post that i updated in the link.. Now my phone is nice and loud, had an hour long talk with one of my friends last night and i had to either keep the phone away from my ear or make it softer.. The registry tweak worked.. will see if it sticks on the next softrest i have to make.. Rom is very stable, havent rest in over a week now..
which tweak?
the posting cited has two diff tweaks in it. Which one helped? Or did you do both?
oh man.. sorry.. i used this one..
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory = 0
The setting was on "2", changed it to "0" and this worked for me.. Thing is damn loud again..
I checked out the other tweak aswell but that was standard on my phone.. So no change on the second one..
I'm using Black 3.0.1 now, it's the only one I can use. The others were all way too loud.
Thanks for posting this. before the newest Cingular release of their new WM5 rom I had to go to bluetooth because I couldn't hear much of anything on the phone. I did with the newest rom, but it seems to have gone away with black, so I will welcome Custel's rom even more since it does this.
This has worked for me also, changing to 0 from 2 is the trick. What about the bluetooth volume? i have a JX10 and i would love it to be louder thou
This worked for my in call volume too.
Anyone know of a fix for the bt headset low volume issued?
Thanks
[email protected]_4ngel said:
oh man.. sorry.. i used this one..
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory = 0
Click to expand...
Click to collapse
I also suffer from this problem so grateful for the fix. Can anyone tell me how to change the registry on my TyTN? Thanks.
bobbyelliott said:
I also suffer from this problem so grateful for the fix. Can anyone tell me how to change the registry on my TyTN? Thanks.
Click to expand...
Click to collapse
use a registry editor like resco or commander. easy to find with a search.
Related
hey,
i have searched a long time but have not found anything about my problem. i tried to use my camera for making videos. the sound of that videos is very low, "to low". I don´t know how to get it louder. i think its not a hardware problem because the sound of notes is very loud.
thanks for every reply
Jimmie
Try Start->Settings->System->Microphone AGC->Enable
Havent tried it, but give it a go
i did so before. but nothing changed
upgrade ur device to the latest 1.40 rom...that should solve it...i had the same prob and now its even too loud
If you notice, he's using a German rom. There are no 1.40 German roms out yet, so that may prove difficult.
that´s bad,
but there must be a solution for this problem. i hope to find or get it next time.
thanks for your replys
and please go on
I don't have the smalest idea if this will help or screw up your camera app. even more, but you could try to run one of the camera cab's that's in the 1.40 extended Rom
BA_Camera_Driver_Patch.sa.CAB
Or look for others here
Do a backup before you try.
the forum is so large. i can´t find the right thread.
how to make a backup and install the new .cab file?
is it possible to remove this to get back to the old one if the new one will not function?
http://www.spritesoftware.com/en/personal/products/windows_mobile/pocket_pc.htm
This will make a backup of your current settings.
BackUp
Install Cab look at 6.
If it dont work, just restore from your backup
Sound could be solved by this little small app
hey
what´s the function of this app and how do i install/ remove it?
thanks for your help
ramram
thanks a lot. this app is fantastic. with this app it ´s possible to change the volume of mic and also change treble and bass boost of the headphone
thanks
Yes, thanks for the app!!
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Which version are you using (of phonealarm)
No problems here with version 1.58 build 100. Using latest LVSW.
Try running the latest beta version (available on the pocketmax forum)
000-000-0000 is a skype. Unfortunately some networks still allow that number to come in. I got one myself today. Ridiculous because if you block it no one from skype will be able to call you.
I have pa 1.58 (build 100). Can you get a skype number if you don't use skype or have there software installed.
Still getting the missed calls from (000)000-0000. The phone doesnt ring just a notification of missed call. Happens 3-4 time a day now. Anyone have any ideas.
chrisryn said:
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Click to expand...
Click to collapse
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Am using PA 1.6 b9 on black 2.0 no problems.
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
lanwarrior said:
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
Click to expand...
Click to collapse
Same as the final release, 30 days.
Have you tried a different skin? I've read that there are some skins that will work with WM6 and some not, i just can't remember the name ;(
Some people also reported that if you set the startupdelay in the pa-config (~10sec.) helps, followed buy one two or sometimes even three reboots....
crazyC said:
Am using PA 1.6 b9 on black 2.0 no problems.
Click to expand...
Click to collapse
I just tried 1.60B9 again and still no luck.
but i am sure i saw some post, where people stated that PA works fine with LVSW. Please can someone confirm that?
Starting to feel like a stupid easter lamb.
chaos42 said:
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Click to expand...
Click to collapse
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
jcespi2005 said:
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
Click to expand...
Click to collapse
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
chaos42 said:
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
Click to expand...
Click to collapse
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
jcespi2005 said:
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
Click to expand...
Click to collapse
and exactly this spirit was preventing me from throwing my tytn out of the window back in august'06 when i bought it
I was a palmOS user for almost 10 years before, and without the help of this forum and all the people here i'am pretty sure i would have gone mad about my ppc phone.
xda-developers you rock!!!
i have no issue until v1.60 beta 6.
beta 7 > got problems. pain. pain.
couldnt get it to play nice with cingular black 2.02. WOn't install at all...
Hi All,
I recently flashed the AT&T shipped rom and then TAI_Sw's awesome M2D rom. However, I have found that the call volume during calls are now very low compared to what I was used to.
I've cleaned my ears and there has been an improvement either lol.
Please could someone suggest a fix? Would this require fiddling with the register? Please could someone suggest what to do.
Many thanks in advance,
Regards,
we are new thread crazy today
jasonchiu said:
Hi All,
I recently flashed the AT&T shipped rom and then TAI_Sw's awesome M2D rom. However, I have found that the call volume during calls are now very low compared to what I was used to.
I've cleaned my ears and there has been an improvement either lol.
Please could someone suggest a fix? Would this require fiddling with the register? Please could someone suggest what to do.
Many thanks in advance,
Regards,
Click to expand...
Click to collapse
post in his thread, maybe he has a fix he can post for you. otherwise i would try setacousticparam.
joshkoss said:
post in his thread, maybe he has a fix he can post for you. otherwise i would try setacousticparam.
Click to expand...
Click to collapse
cheers for your suggestion.
is setacousticparam a .cab file? please could you link me?
Try this...
http://forum.xda-developers.com/showthread.php?t=357543&highlight=setacousticparam
If I can remember correctly this cab runs as autoinstall in his rom after flashing. Default volume levels in his roms are usually at 50% for everything, I think. Maybe you havent checked that during calls?
I'm running the same excellent rom but have the opposite problem my phone is too loud! I have run the in call volume fix found on the thread and although I can now change the in call volume even the minimum setting is far too loud!
If there is a registry setting or anything that could help, a posting of what do would be much appreciated.
Edit: Tried the set accoustics and it made no difference for me.
I installed srs wow on my excalibur but theres doesnt seem any sound after i install it neither from loudspeaker nor from my headset.......
Have you tried uninstall the app¿
Sound comes back as normal?
yes sound comes back to normal...... when i install it dsnt
baiggee said:
yes sound comes back to normal...... when i install it dsnt
Click to expand...
Click to collapse
So there you have your answer
SRS Wow is not working with S621, at least the version you are using...
Anyone have working version of htc s620?? i used both 1.21 and 1.28 nothing worked.....
To be honest it's an awful bit of software far better to get a decent Media Player like Pocket Player, the sound of WOW is unapealing and when turned off it doesn't default to defacto driver and still sounds bad.
Just my 2p from an audio purist
Theres a working verson, i think mines 133 could be wrong installed it long ago, theres a verson just keep seraching for other versons.
Anyone Please attach a working version for htc excalibur, thnx in adv....
i found it myself!!!
baiggee said:
i found it myself!!!
Click to expand...
Click to collapse
Forgive me, but... I probably was living in Mars for a few ages ... and... what is it meant to be? I mean... what is this software supposed to do?
Regards
Gives u an extra twist to your sound quality!!!!
theres no point to putting srs wow on the excalibur. that program is made for phones with stereo speakers.
I wish i still had my verson of srs i had working on my old other s621 worked mint.. louder and more haronic sounding i dont use my new s621 like i used my other one but i would recommand keep looking for the one i used if u are interested in SRS Wow Effects, i was impressed with my verson i found Cheers goodluck hope to see it here one day gain LaidHER.
I tried to mess around with advanced config tool but had no success listening to music on headset without blanks or skips every time i moved my head...
then i did the HT280 firmware update i just found in the forum but its worst
any of u guys using HT820 and happy with it ?
i remember having to struggle on every HTC to get this working...
seems like this will be never fixed by htc
hope some of you have same material and can post your settings and feedback on your situation
thx
Yep have the Moto too, great headset (a little uncomfortable at times but great audio and features)
No issues here with mine, though I manually changed bitpool settings.
I have found that Advanced Config can cause issues on the Rhodium so adv ise not using it for now, just change your required settings manually.
I'll try and dig out my settings during the week and post back.
If you have manually installed AC then try un-installing and testing.
Cheers,
Beasty
thx for your answer mate, thx for your time to post yours settings eventually
actually i cant uninstall Advanced Config : it s in the custom ROM im using...
i just flashed latest version and didnt install tom tom yet in case it was the problem
but seems like it isnt...as usual with HTC : stereo BT out the box is ****
tnt23 said:
thx for your answer mate, thx for your time to post yours settings
actually i cant uninstall Advanced Config : it was in the custom ROM im using...
i think i got a problem with BTstack since tomtom 7install
i renamed or recopied older versions of those corrupted files...but still i cant add a new device anymore...
Click to expand...
Click to collapse
I am also using NRGZ build, but have not launched AC.
Once I dig out my settings (2moro if I get a chance) I'll post, you may have to hard reset though. I advise not running AC untill we have an updated version.
Also TT7, my version does not replace the BT files, I post the version number for that 2 moro too.
Cheers,
Beasty
ok man ill wont start AC on this new flash yet...
how about WGVA Tweak ?
I am using that headset on my stock Telus TP2 with no problems and have not done any regestry edits to Bluetooth.
tnt23 said:
ok man ill wont start AC on this new flash yet...
how about WGVA Tweak ?
Click to expand...
Click to collapse
Current Bitpool and MaxBitpool I have set to 1e (30) which is the same setting I used on my Universal for years without issue.
Have played 3 songs this am without any lag or skipping using Touch Flo Player. CorePlayer also works flawlessly, haven't tested and don't use M$ Media Player.
HDTweak and other tweak tools I don't like to use so can not comment as most will apply a default setting for certain items. I prefer to only modify what "I" want.
Cheers,
Beasty