Hi,
i hate the right LED over the Display which all time blinking... Did someone know how i can deactivate it forever?
greets
Kenny
Desolder it from motherboard
..or simply stop the driver for the led (with a taskmanager stop $device\LED1, or maybe $device\NLD1, just try what works for you.)
(I use FdcSoft taskmanager)
hi,
great. it´s ok now.
thanks
greets
Kenny
I'm glad it works
Just for curiosity..what driver did you disable?
NLD or LED1?
Do the WiFi led work?
AFAIK you will deactivate vibration alert as well. Could you check?
I think I wrote VJImpoto for this, but it doesn't work 100%. Haven't had the chance or inclination to finish the work off - but the right led reactivates itself after a while (I think with any of the currently known techniques).
V
Hi,
today i checked, that my Vibration will not work. Can someone explain how i can activate this LED now. When i click on Set Manual and will start it, then comes an error and it don´t start.
I try it with the Task Manager
greets
Kenny
Black nikko goes a long way.. also duct tape
Now i have the Problem, that i deactivate it with the Task Manager and now i can´t activate it, because the Vibration is too important.
I hope someone can help me.
greets
Kenny
However I can't understand the reason why it seems so difficult to deactivate the right led on the Hermes....I remember that in my BA was such a simple thing to do...
Hi,
when i deactivate the LED with the Taskmanager, then the Vibration is off too.
Thats the Problem. And the funniest thing is, that i can´t activate it now.
greets
Kenny
Related
Sorry if this is a repost but I couldn't find anything.
I Just updated to WM VI Black 1.2 and now I can't press and hold the comm button and have it switch from normal or loud to vibrate and vice versa. When I press and hold it the comm manager just opens. Can someone help me?
JaredYng said:
Sorry if this is a repost but I couldn't find anything.
I Just updated to WM VI Black 1.2 and now I can't press and hold the comm button and have it switch from normal or loud to vibrate and vice versa. When I press and hold it the comm manager just opens. Can someone help me?
Click to expand...
Click to collapse
Search and you will find the .cab file for this.
Here ya go!
THANKS!!! Hopefully this works
I have another question about this. Does anyone know of a way to get it to switch from vibrate to normal when you plug it in to charge and then go back to vibrate when u remove it from charging?
I already know about phonealarm but I don't want to buy that. Thanks
BTW, that cab fixed my other problem...Thanks a lot
There is nothing else that will do that? Regedit or anything?
JaredYng said:
I have another question about this. Does anyone know of a way to get it to switch from vibrate to normal when you plug it in to charge and then go back to vibrate when u remove it from charging?
I already know about phonealarm but I don't want to buy that. Thanks
BTW, that cab fixed my other problem...Thanks a lot
Click to expand...
Click to collapse
Phonealarm is cheap, buy it dude its so worth it. Theres new versions out all the time and it does everything you need really well.
JaredYng said:
I have another question about this. Does anyone know of a way to get it to switch from vibrate to normal when you plug it in to charge and then go back to vibrate when u remove it from charging?
I already know about phonealarm but I don't want to buy that. Thanks
BTW, that cab fixed my other problem...Thanks a lot
Click to expand...
Click to collapse
I believe there's add-on apps that will let you do that. I remembered the Sony Ericsson phones used to have this kind the capability.
trashcan said:
I believe there's add-on apps that will let you do that. I remembered the Sony Ericsson phones used to have this kind the capability.
Click to expand...
Click to collapse
Do you remember any of the add-on apps because I was unable to locate any.
When i'm in the car i want to get my spvM650 automaticly on speaker when i answer calls... is that possible?
...sort of...
I have a prog installed called Teksoft Speakerphone. This allows a button to be allocated to turn the speaker on.
You can even activate it without a call in progress so that it will answer on speaker. I use it all the time in the car.
It also comes with a today screen button type plugin - but as far as I can tell its completely and utterley useless....but the prog itself rules!!!
I have attached the cab - let me know how you get on....I know it works on my Orbit....
chandlercjh said:
I have a prog installed called Teksoft Speakerphone. This allows a button to be allocated to turn the speaker on.
You can even activate it without a call in progress so that it will answer on speaker. I use it all the time in the car.
It also comes with a today screen button type plugin - but as far as I can tell its completely and utterley useless....but the prog itself rules!!!
I have attached the cab - let me know how you get on....I know it works on my Orbit....
Click to expand...
Click to collapse
Thanx very much, just dl'd. Will install tonight and let you know. many thanx
Installed and working great... many thanx for the app.
Great app! Thanks for sharing.
I've been looking for an app like this for a while thanks.......
One question. How do you toggle it off once you've selected it ??
Gilgamesh1066 said:
I've been looking for an app like this for a while thanks.......
One question. How do you toggle it off once you've selected it ??
Click to expand...
Click to collapse
thats the only flaw I can find......it turns itself off once you have ended your phone call.
During a call you have to turn it off using the button in call status.
Its good for turning the speaker on - just not for turning it off again....you soon get used to it!!
is there a way to disable the green flashing light? Have it blink only for notification (SMS MMS Voicemail missed calls etc)
Without using an app. I know dontforget does it well. Since notification (reminders) works on this version, no need for that app.
Thanks in advance
There's nothing different about the blinking light. ALL ROMs blink that light as long as the GSM radio is on... I dont think anybody found a way to turn it off.
try this
http://forum.xda-developers.com/showthread.php?t=371391
This one works.
Yeah i know about programs out there that manipulate the registry. I just dont want to add a program too turn off the blink.
I figured someone might off figured out what registry gets changed.
Thanks
Mikey1022 said:
Yeah i know about programs out there that manipulate the registry. I just dont want to add a program too turn off the blink.
I figured someone might off figured out what registry gets changed.
Thanks
Click to expand...
Click to collapse
imho it's not possible to do that thru registry alone
Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF
Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!
I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.
Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!
Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF
I just picked up my tilt 2 yesterday and up until right now it's been great. I turned off my bluetooth last night before I went to bed, and when I try to turn it on now it gives me an error saying, "Can't turn on bluetooth". I'm trying to turn it on via the Wireless Manager.
Can somebody please help? This is extremely annoying.
I don't know if I understand you well, but here is what I think you could do:
tap on the top bar and you will get the notification manager. On top you will see a bar with your carrier name. On the right of that bar there is an icon that shows the strenght of your carrier. Tap that icon and you will end up in the communication manager. There you should be able to turn BT on or off.
Hope this is helpfull.
regards, Kuzibri
kuzibri said:
I don't know if I understand you well, but here is what I think you could do:
tap on the top bar and you will get the notification manager. On top you will see a bar with your carrier name. On the right of that bar there is an icon that shows the strenght of your carrier. Tap that icon and you will end up in the communication manager. There you should be able to turn BT on or off.
Hope this is helpfull.
regards, Kuzibri
Click to expand...
Click to collapse
Thanks for the response. This is what I tried doing, and when I try to enable bluetooth I get that error. I'm thinking unfortunately I may have to hard reset already
sorry I could not help you, but I would try several soft resets before a hard reset.
That's okay, you tried!! I tried about 10 soft resets. It looks like I have no choice.
good luck and I hope that the hard reset will do the job for you!!
OOPS, before I forget: do you use RamSweeper? If yes, then this is the problem and not your TP2. Please let me know if you use this program and I will tell you how to avoid this BT problem.
No I do not use RamSweeper. I actually just did a hard reset and bluetooth works fine now. Very weird.
Since turning off bluetooth I've installed SlingPlayer, vibra switch (to turn phone on vibrate fast), and thats all.
OK, nice to hear and good luck. Maybe either Slingplayer or vibra switch is the cause of your problem. Maybe its good to try this out before running into the same problem again.
Thank you for the help. I just installed SlingPlayer and bluetooth still works. I'm going to wait on the vibra switch software because it isnt 100% needed with the Tilt 2. I can always just push the volume down until it's on vibrate.
Thanks again!!
Hey Kuzibri just wanted to let you know that this was the problem: http://forum.xda-developers.com/showthread.php?t=522373 I forgot that I installed TomTom on there!
I dont know if you still logon or not... my bluetooth wont turn on I tried hard reseting but still get teh status msg "can't turn bluetooth on' any idea how to fix it?
MineralGray02K said:
No I do not use RamSweeper. I actually just did a hard reset and bluetooth works fine now. Very weird.
Since turning off bluetooth I've installed SlingPlayer, vibra switch (to turn phone on vibrate fast), and thats all.
Click to expand...
Click to collapse