Develop Bugs

Phone Pad Vibrate

Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard

What exactly does this do, with Phone Pad? Sounds interesting

It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...

YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard

sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."

Hey thanks for converting to WM6 I had been missing it for awhile now!

Any chance this will work in WM5? Please and thanks.

Yeah this is soooooooooooo useful tip man, thanks a lot !!^^

Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...

Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.

I'd like to know what you did to get your keyapd tones back, this program sucks!!!

chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...

smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?

This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.

Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???

Vibrate dial pad
Thank you ! This is just what I was looking for

Sorry.Didn't find how to delete message

Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???

Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?

could someone upload it on rapidshare, because i can´t load it, thank you

Any way to get on speakerphone automaticly?

When i'm in the car i want to get my spvM650 automaticly on speaker when i answer calls... is that possible?

...sort of...
I have a prog installed called Teksoft Speakerphone. This allows a button to be allocated to turn the speaker on.
You can even activate it without a call in progress so that it will answer on speaker. I use it all the time in the car.
It also comes with a today screen button type plugin - but as far as I can tell its completely and utterley useless....but the prog itself rules!!!
I have attached the cab - let me know how you get on....I know it works on my Orbit....

chandlercjh said:
I have a prog installed called Teksoft Speakerphone. This allows a button to be allocated to turn the speaker on.
You can even activate it without a call in progress so that it will answer on speaker. I use it all the time in the car.
It also comes with a today screen button type plugin - but as far as I can tell its completely and utterley useless....but the prog itself rules!!!
I have attached the cab - let me know how you get on....I know it works on my Orbit....
Click to expand...
Click to collapse
Thanx very much, just dl'd. Will install tonight and let you know. many thanx

Installed and working great... many thanx for the app.

Great app! Thanks for sharing.

I've been looking for an app like this for a while thanks.......
One question. How do you toggle it off once you've selected it ??

Gilgamesh1066 said:
I've been looking for an app like this for a while thanks.......
One question. How do you toggle it off once you've selected it ??
Click to expand...
Click to collapse
thats the only flaw I can find......it turns itself off once you have ended your phone call.
During a call you have to turn it off using the button in call status.
Its good for turning the speaker on - just not for turning it off again....you soon get used to it!!

[Pls Help] Lost HTC Full Screen Volume Control

hi all
my touch hd lost full screen htc volume control(left for system volume and right for ring volume) and it changed to default(old version), can someone tell how to change back, i want full screen
one million thanks

I have seems problem,any idea?I have that problem before put colored volume bar.

Can you post a screen shot for the problem?

I posted screen

vidojajce said:
I have seems problem,any idea?I have that problem before put colored volume bar.
Click to expand...
Click to collapse
This happens to me sometimes, because of an installation of an app or a skin.. I beleive it has something to do with the volume control scripts or somethin'..
If I were you I wouldn't worry so much, as it fixes up itself when you uninstall whatever caused this problem, or install another app or skin that could fix the problem without you knowing..!
Anyhow, attached is the original volume control files; transfer to your device & replace to WINDOWS folder using TotalCommander...
@chanmama
Would this be your case..?

Blessed HD said:
This happens to me sometimes, because of an installation of an app or a skin.. I beleive it has something to do with the volume control scripts or somethin'..
If I were you I wouldn't worry so much, as it fixes up itself when you uninstall whatever caused this problem, or install another app or skin that could fix the problem without you knowing..!
Anyhow, attached is the original volume control files; transfer to your device & replace to WINDOWS folder using TotalCommander...
@chanmama
Would this be your case..?
Click to expand...
Click to collapse
tks so much,
but unwork for me, i replace all files to window, then reboot, no effect....

do you have s2u2 installed? if yes, check if the volume control in s2u2 settings is disabled
regards jan

hausen said:
do you have s2u2 installed? If yes, check if the volume control in s2u2 settings is disabled
regards jan
Click to expand...
Click to collapse
volume control in s2u2 was enable, unwork

chanmama said:
volume control in s2u2 was enable, unwork
Click to expand...
Click to collapse
As I mentioned earlier; this could happen because of an installation of an app or a skin that is not FULLY compatible with the HD, although it works fine.
Try to remember when did this happen so that you'd be able to specify which apps/skins have such effect on your device.
Moreover, you shouldn't worry much about this matter since it solves itself as you install/uninstall applications

chanmama said:
volume control in s2u2 was enable, unwork
Click to expand...
Click to collapse
That was a misunderstanding: I meant you should try to DISABLE that in s2u2 settings...
regards jan

Hello,
I have a similar problem: for some reasons, my volume buttons do not work anymore; if I press them once, I go to the usual volume screen. But if I press them again, it returns to the previous screen and act as "go up/go down".
For example : if I am in the Music tab and press the volume button once, it goes to the volume screen. But if I press it again, instead of increasing/decreasing the volume, it returns to the music tab and go to the next/ previous song.
It is quite annoying, so any help would be greatly appreciated
BTW, I installed Reales Task Bar yesterday, and I noticed the problem after that, so maybe it is linked. I uninstalled Reales Task Bar but nothing changed.
**Edit** In fact it was Resco Contact Manager 0.95 Beta that caused that problem.

thanks!!
had the same problem now solves..
resco contacts beta

similar problem here...
the keys won't work anymore if i press them, i always have to open the title bar and manually go into the volume settings and raise or lower the volume with the keys or with the finger.
outside the volume settings it does absolutly nothing?!
I guess it's Mobile Magic, because it changes the keys' behaviour, but i turned it off already.
can someone help?

Same problem with Pocket Shield
I did get the same problem after I installed (and payed for) PocketShield....
Will try to replace the files (mentioned above) unless someone has a better solution?

ya definitely thats because of app installation that is not fully compatible often i have seen those problems and i started making another folder in my pc and mobile saying fully working and now i dont have that problem and ofcourse one of you mentioned the problem bcoz of topbar ya definately dont believe those topbar thats rediculous thing coz u cant uninstall even if u uninstall its always in ur remove program and that effects u on ur screen rotation aswell.

happened to me yesterday so i just did a hard reset and now its perfectly working again

chanmama said:
hi all
my touch hd lost full screen htc volume control(left for system volume and right for ring volume) and it changed to default(old version), can someone tell how to change back, i want full screen
one million thanks
Click to expand...
Click to collapse
well try this and do it twice ... start/settings/touch flo/ and check the box says "show system status screen when status icons are tapped"

Is this possible? Completely lock the screen with the Power button

(This is my first post, so I'm very sorry if I screw something up...I've been reading the XDA forums for quite some time now, so I hope I've got it right... Also, this is my very first WinMo device, so I apologize if the solution is something really stupid and easy.)
Hello guys,
I just got the TP2 about three days ago, and I SPLed it and installed WM6.5 on it. I've got the EnergyROM_RHODIUM_20091007_Titanium ROM on it right now.
However, there's something that's been annoying me. Whenever I hit the power button on the top of the TP2 to deactivate the screen, the screen will turn on if an incoming text or email should come in while the screen is off.
The only way it won't do this is if I lock it from the Honeycomb menu, then turn off the screen via the power button.
Is there a way to make the power button lock the phone and shut off the screen so it will not wake up when a text comes in?
If someone could tell me a way to do this, I'd very much appreciate it!
Thanks.
EDIT: Forgot to mention this is a T-Mobile USA Pro2.

seems this software should satisfy you :
LockDevice: Another great application that locks the device with the tap of the power button. Uses the standard windows lockscreen, very lightweight. (freeware) ~ Thanks thierry2064
in a very useful thread:
http://forum.xda-developers.com/showthread.php?t=550973

Xodium;4709086I said:
just got the TP2 about three days ago, and I SPLed it and installed WM6.5 on it. I've got the EnergyROM_RHODIUM_20091007_Titanium ROM on it right now.
However, there's something that's been annoying me. Whenever I hit the power button on the top of the TP2 to deactivate the screen, the screen will turn on if an incoming text or email should come in while the screen is off.
The only way it won't do this is if I lock it from the Honeycomb menu, then turn off the screen via the power button.
Is there a way to make the power button lock the phone and shut off the screen so it will not wake up when a text comes in?
Click to expand...
Click to collapse
If you have the WVGA(HD) Tweak tool (should be under All Programs), it has a setting that disables Wake on SMS -- it's setting 2.2.
I don't know about a setting specifically pertaining to e-mail...my very-similar setup doesn't wake up as yours does.

buckingham said:
seems this software should satisfy you :
LockDevice: Another great application that locks the device with the tap of the power button. Uses the standard windows lockscreen, very lightweight. (freeware) ~ Thanks thierry2064
in a very useful thread:
http://forum.xda-developers.com/showthread.php?t=550973
Click to expand...
Click to collapse
That's a very nice lock, I use it myself, but it's for WM 6.1.
For WM 6.5 use SmartLock.
S

MCbrian said:
If you have the WVGA(HD) Tweak tool (should be under All Programs), it has a setting that disables Wake on SMS -- it's setting 2.2.
I don't know about a setting specifically pertaining to e-mail...my very-similar setup doesn't wake up as yours does.
Click to expand...
Click to collapse
I installed SmartLock, then, when I went looking for the WVGA Tweak Tool, it was there. I thought I didn't see it, but, oh well. I checked it and it said that Wake on SMS was disabled (default).
Maybe SmartLock did that? I'm not sure. I'm testing it right now. Thanks for all the help so far.
EDIT: IT DID WORK! Thanks so much! (Definitely makes me feel better about selecting the TP2 to replace my iPhone 3GS )

sleonard said:
That's a very nice lock, I use it myself, but it's for WM 6.1.
For WM 6.5 use SmartLock.
S
Click to expand...
Click to collapse
Just to make clear: LockDevice works perfectly for WM6.5. I use it myself a long time now with different 6.5 ROMs.

Quick Tilt 2 Question !

Hi,
I have a Tilt 2 with stock ROM. The only two enhancements I use is "S2U2" and "Advanced Configuration Tool" ! I changed someting and now have a little problem :
When I get an incoming call and the caller id with the pic pops up, I can't pickup the call, using the green on-sceen button. This button does NOT pickup the phone call. I have to use the green hardware button to pickup the incoming call. However, I can use the RED on-screen button to end the call.
I soft reset the phone a few times and tried some settings with the "S2U2 and Advanced Config. Tool", but I can't get it to work.
Any ideas ?
I'd appreciate any help and suggestions.
Thanks,
JCE

same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-

jerzey_devil said:
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
Click to expand...
Click to collapse
Haha, it takes time to understand all the jargon and such that takes place around here. Just do some reading and searching, don't be afraid to ask questions if you can't find a thread explaining it. Eventually I would suggest flashing to a good rom like one of the Energy Rom's or a Cell Rom. The two best Rom Cooks on the Rhodium (Touch Pro 2/Tilt 2) side of xda.

I say the same thing as doublen1, use a non-stock ROM because these come with features already installed and you will be able to use S2U2 and all that stuff. and about the actual issue, I have had problems picking up calls with the screen, so I just started using the hardware keys.

Make sure you didn't mess around with any of the touch screen settings in Adv. Configr or BSB tweaks or something like that. This usually causes the problem with the dialer.

Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE

jce2005 said:
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
Click to expand...
Click to collapse
Not that I know of off the top of my head. There might be a setting inside of Adv Config that would allow you to restore to default. Also the S2U2 has a setting to take control as the dialer screen when somebody calls. You can try messing around with the settings in S2U2 as well.
PM me if you don't find an answer soon.