has anyone else experienced the following:
the camer app on my orbit used to work ok but now keeps saying 'camera' is not a valid poclet pc application. every time i press the camera button or launch the app.
i have the following apps installed:
pocket weather
e mobile tv
wifi companion
batterystatus
oper browser
tom tom
02 custom
tried everything to get the camera working and if i install coolcamera it works exept the origional cam app is better than coolcamera. anyone know how to get it back ie in the registry or anywhere else
Same for me. A hard reset and restore from backup did not work. So I did a hard reset and reinstalled everything from scratch. Now the camera works again with the built in application.
I have the same problem, now.
Are there any other solutions as a hard -reset in the meantime?
I had the same problem, too. I did a hardrest without the micro-sd-card and then a restore with sprite backup - after this it works - no camera problem.
good job, uliba.
It works for me. Thanks.
Had this problem before too.
After many tries I realized that it occurs when phone was overclocked with batterystatus (247Mhz). Since 2 weeks, when I use the camera I go back to 201mhz and no problems anymore with the camera.
Hope it could help.
Thank you, Doume, but...
I never had overclocked my phone, so there must be another reason.
Present Camera Problem
Hello, I just got my O2 ORBIT (1) from ebay... Yeah yeah, I know it's outdated, but I'm not so rich, and my hands were itching to get a touchscreen GPS device... So now I got O2 ORBIT with WM 6.1 and when I try lauch camera using the side button it gives me the error (Error locating the target filename). When I try to launch camera cia Programs/camera it just gives me a glimpse of white screen and returns to programs... Any1 knows how to fix this without a hard reset? Any hotfixes released up to this day? Or maybe it doesn't work because of WM 6.1?
Related
Whe I use any of the today plugins like SPB pocket Plus most of the times after a soft reset the PPC freezes... It may needs 10 soft resets to work again!!!
Any help with this would be really appreciated...
Qtek 9090
Rom:
1.22.00 WWE
Ext ROM:
1.22.167 WWE
I know people with I-mate roms with no problem!! Should I put I-mate's rom??
I have the same issues..
I just stopped using those programs for that reason.
MS VOICE COMMAND 1.0 was bad for that too.
So I am not the only one!! :? :? :?
That's damn bad!!!
I've read this on the SPB site.. That the HTCs have this problem!! :x :x
The only solution is before a soft reset to remove the programm from the "today"... :twisted:
Are you using battery pack as well?
I had the same problem on my qtek9090.
I have done a hard reset and have installed all my programs one by one, but first SBP.
Than i have testes to istall Battery pack later on as last one and .....
no problems anymore. But why use Battery pack if you use SBP? So i de installed Battery pach.
Everything is working fine now for the last months.
Andre le Fevre
I tried them one at a time of course..
With SPB now you don't have a problem? It was the first programm you installed? What do you have it to show on the today screen? Apart from the program shortcuts?
ROM version?
I have had no such problems with my Qtek 9090, from the first ROM that it came with to the one I'm using now. I use PocketPlus 2.2 and T-Agenda, and it works perfectly.
i am using Tweak 2.41, Pocket Plus 2.2 and Pocket Hack Master 3.05. The results are that, although they are enhancement tools, but will slower my XDA IIs sometimes.... Therefore, they are not as stable as I expected. As a result, I removed them... Now, my machine work great and response fast (but two of ten times are slow especially I turn it on after few hours).
I think this is a rom dependent problem.
Please list the things that WORK and do NOT WORK with the new ROM uni_cdl_13068_130153_10900_wwe.
Opera 8.5 beta 2 with Tabs Works
You have to change the System font to somethin else though and then back to Tahoma else you see Wingdings
Use Tweaks 2k2.net to achieve this
Regards
The COnnection manager key on the hardware keyboard (Fn+Right Arrow) doesn't do anything anymore
Everything seems to work better and faster on my jasjar, except the fn key combination to turn on the comm mgr. Other than that everything seems to work for me
It can't show date & time on top bar on today screen as it is occupied by the battery icon.
I tried using tweak2k2 to add date & time, it was ok on other screens except "today". On today screen, it shows a broken icon.
May be it is just a simple reg tweak, but waiting to be found... Ideally, I want to see both info.
Bluetooth Turning off by itself
From what I have seen so far the new ROM has a similar problem than the current official Imate release English ROM 1.13.53 with Bluetooth turning itself off. In connection manager it appears to be on but when entering the settings the tickbox is blank. Has anybody else seen this behaviour or have a workaround? Thank you.
Bluetooth Turning off by itself
From what I have seen so far the new ROM has a similar problem than the current official Imate release English ROM 1.13.53 with Bluetooth turning itself off. In connection manager it appears to be on but when entering the settings the tickbox is blank. Has anybody else seen this behaviour or have a workaround? Thank you.
i am having a problem with mms and pop accounts, dont work. others said its just my device, but dont want to hard reset again....
Netfront 3.1 and Netfront 3.2 dont work for me in this version. It just wont open.
simon_darley said:
i am having a problem with mms and pop accounts, dont work. others said its just my device, but dont want to hard reset again....
Click to expand...
Click to collapse
I cant get MMS working with O2, was going to try to have a look at it later tonight.
Can't get SPB Pocket Plus software to run in that it installs OK and appears to function without problems but as soon as you do a reset on the universal it hangs when restarting on the windows startup screen.
This appears to be nothing to do with the extended ROM as I also have the same problem when this is not installed.
Does anyone know how to make the extended ROM visible in such a way that the system doesn't create a second "Storage Card" entry. This behaviour occurs when I set the
HKLM\System\StoreageManager\autoload\TRUEFFS_DOC1 bootphase attribute to 2
and because I have installed all my utilities on the SD Card they don't work any more as the SD card gets renamed to "Storage Card1"
ppitkin said:
Can't get SPB Pocket Plus software to run in that it installs OK and appears to function without problems but as soon as you do a reset on the universal it hangs when restarting on the windows startup screen.
This appears to be nothing to do with the extended ROM as I also have the same problem when this is not installed.
Does anyone know how to make the extended ROM visible in such a way that the system doesn't create a second "Storage Card" entry. This behaviour occurs when I set the
HKLM\System\StoreageManager\autoload\TRUEFFS_DOC1 bootphase attribute to 2
and because I have installed all my utilities on the SD Card they don't work any more as the SD card gets renamed to "Storage Card1"
Click to expand...
Click to collapse
Just curious, are you using v.3.1 of SPB Pocket Plus? I never got the problem you say. I have installed SPB on O2, Imate, and QTEK variants of the universal ROM
pocket outlook now polls for email whether you leave it on the said account or not. Oh push email works great!
jorgee: The purchase invoice says 3.0 - naturally I can't look as I don't currently have it installed because of the reset issue.
Never had a problem with the old ROM (German T-Mobile from january)
Really annoying as I love the features this tool has.
ppitkin said:
jorgee: The purchase invoice says 3.0 - naturally I can't look as I don't currently have it installed because of the reset issue.
Never had a problem with the old ROM (German T-Mobile from january)
Really annoying as I love the features this tool has.
Click to expand...
Click to collapse
U should upgrade to 3.1, you'll notice huge improvement in speed and if i'm not mistaken you'll get free update since you purchased 3.0, just use the old serial number.
I even installed it on extended rom memory without any problem at all, it runs as good as installed in main memory
Jorgee: thanks for the tip.
3.1 works great (even after a reset!). I'm a happy man again.
On my old Qtek 9000 ROM, the data connection automaticly disconnected after checking email, but with this new ROM, the connection stays on.
Anyone knows a way to change this back ??
findus said:
simon_darley said:
i am having a problem with mms and pop accounts, dont work. others said its just my device, but dont want to hard reset again....
Click to expand...
Click to collapse
I cant get MMS working with O2, was going to try to have a look at it later tonight.
Click to expand...
Click to collapse
snap mms isnt working on o2 paygt also in the connection settings the domain is suposed to be payandgo.02.co.uk but you cant fit it all in, if you leave it blank tho it still connects to the net
Log me in
Log me in, an remote acces application, doesnt seem to work under new ROM, did work under Qtek 1.13.64. (www.logmein.com)
keyboard backlight
I can't find the reg key to change the length of time the keyboard backlight stays on. I am not sure if the location changed or not, but it isn't where it used to be, at least on mine.
Hi!
In my Artemis is annoying problem. Navigator 6.03 stops opening, when "the hands" are on the display. This happens about three to four times a week.
I have to make a soft reset after that. (I use TomTom daily.)
The second symptom, which probably comes from above, is that I can not make a phone call. All things seem to be OK, but I can not receive or make a phone call. (I give pin -code and the phone shows good fieldstrength.)
I have Vanilla 1.0 in my phone.
Please, help me. This is the only problem, what I have with Vanilla 1.0
"PS. I think I found the reason. See below!"
I had a similar problem a couple of weeks ago (I'm using vanilla 2.01), but it was not once a day, but everytime I tried to use it.
I solved it taking the TomTom files from a backup that I had from my microSD, and overwriting the ones that I had at that moment.
Since then no problems whatsoever.
Hope it helps.
Motero73 said:
I had a similar problem a couple of weeks ago (I'm using vanilla 2.01), but it was not once a day, but everytime I tried to use it.
I solved it taking the TomTom files from a backup that I had from my microSD, and overwriting the ones that I had at that moment.
Since then no problems whatsoever.
Hope it helps.
Click to expand...
Click to collapse
Did you make a backup copy of all in microSD, formatted the microSD and put all back?
I just copied the files from the microSD backup that had to do with TomTom (f.e. Program Files/Navigator), and put them into my microSD overwriting the ones that I had at that moment.
It seems that some file was corrupted, and making this solved the problem.
Get update from myTomTom
Hi,
there is an official update specifically for the Artemis / P3300. If I'm right it is version 6.2. The freeze of earlier versions is a known issue. Get yourself an account on mytomtom.com and look for updates. You will find version 6.2 there.
chribo28 said:
Hi,
there is an official update specifically for the Artemis / P3300. If I'm right it is version 6.2. The freeze of earlier versions is a known issue. Get yourself an account on mytomtom.com and look for updates. You will find version 6.2 there.
Click to expand...
Click to collapse
Hi!
I cannot find any other than 6.03 -version. Could you send me Internet site address.
Hi
I am using B&B 4.3 and Tomtom 6.030 bulid 8230 without any problem.
Try disabling POIs from Tomtom and observe if it still crashes. If it crashes or not, you need to update to 6.030. You can download it from tomtom website.
nm8 said:
Hi
I am using B&B 4.3 and Tomtom 6.030 bulid 8230 without any problem.
Try disabling POIs from Tomtom and observe if it still crashes. If it crashes or not, you need to update to 6.030. You can download it from tomtom website.
Click to expand...
Click to collapse
Thank you, that will be the cause. I removed TomTom and loaded it again. Let´s see, if it freezes again. It has not done it in three days.
Matti23 said:
Thank you, that will be the cause. I removed TomTom and loaded it again. Let´s see, if it freezes again. It has not done it in three days.
Click to expand...
Click to collapse
The phone was shut down during the night. I opened it and started TomTom. All went OK. I shut TomTom and wrote sms -message. The writing was quite sticky. Artemis did not send the message, because it was jammed.
I took away all POIs and loaded the map again.
I hope this solved the problem.
Matti23 said:
I took away all POIs and loaded the map again.
I hope this solved the problem.
Click to expand...
Click to collapse
You dont need to delete POIs. Just disable them from displaying when youre running Tomtom.
Change Preferernces > Enable/Disable POIs
then untick everything.
TomTom used to crash on a regular basis on my Artemis because I had it overclocked to 286MHz and when it was plugged in to the car charger the battery was getting very hot so it would freeze then reset after 5 minutes or so. Very annoying but I now have to restore the original clock speed each time I use TomTom, this may well be the issue you're having?
Change your SD... I had freezing problem with SD and microSD on both 9100 and P3300. After using new hight quality cards, no more problem.
Probly I found the reason
I think I found the reason for my problem, when TomTom freezed, when loading it.
I had enAlarmPPC v.3.3.1 -program, which caused that. I removed the program, and I have had that problem any more.
Now every time, when I change the time, I got an error message: "Cannot execute\Storage card\Program files\enAlarmPPC3.3.1\enAlarmPPC.exe"
I can not get rid of that message. I have souhgt it in the registry, but there are no mention of that.
Does anybody know this problem?
PS. I got a little program, which took away that error message. I could find it here: http://www.maik-wiege.de/en/FAQ/enalarmppc/uninstall.html
I've had just the same problem with Tomtom and had to keep restarting my PDA to get Tomtom working again.
Then I realised that whenever it ist stuck with the "hands" in the bottom corner but won't display tomtom screen, there is a "notification" waiting to be displayed.
Once you've tapped on the "Notification" text at the bottom left of the screen to clear all the notifications, then Tomtom will display itself again - without rebooting the PDA....
Hello,
I just installed Tomtom7 on my pro2. but now the bluetooth stack is broken.
On other websites they say that tomtom replaces BtCoreIf.dll and BtSdkCE30.dll I already removed them and soft reset, but that doesn't work.
Can someone with a Pro2 upload those 2 files so that i can replace them on my phone? That will be the fastest solution i think... Thanks!
When this happened to me I had to hard reset, then re-install TomTom without the BT files. I'm still not entirely clear what the problem was, though, or how to correct it without hard resetting, but those files seemed to have corrupted something.
had The same problem had to hard reset. teach me to get a pirate version
I'm having the same issue. So removing the files from the cab fixes it?
______________________________________
Watch my full in-depth review of Touch Pro 2
http://www.youtube.com/watch?v=VgTjSbpFDhQ&feature=channel_page
No problems on my site... Using tt7.915
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Corell said:
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Click to expand...
Click to collapse
Runing gr8 with internal GPS
Roberto79 said:
Runing gr8 with internal GPS
Click to expand...
Click to collapse
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Roberto79 said:
No problems on my site... Using tt7.915
Click to expand...
Click to collapse
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
RMU said:
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
Hmm dont have any of posted problems looks like i was just lucky lol but maybe that somthing jumps up later when i'll "really need it"...
Corell said:
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Click to expand...
Click to collapse
Its the latest release of tomtom7 so it has to work at least a bit older version works gr8 on my TP2, resolution is superb. I have tryed Amigo but it didnt work even with multi resolution .gro file
RMU said:
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
now i see that is not a tomtom problem, because i've hard reset my pro2 and not yet installed tomtom, so i've made another thread for this.
but the bluetooth problem is still there when i install tomtom
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
It seems to be. It corrupts the files.
_________________________________________________
Check out my full in-depth videoreview of the Touch Pro2: http://www.fuzemobility.com/excellent-htc-touch-pro-ii-video-review/
dicko99 said:
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
Click to expand...
Click to collapse
Uninstalling tomtom does not help for me.
The files are replaced on the device so a hard reset is the easiest way back.
TT 7.910.9185 is running fine on mine, I did have the same issue with another version of TT7 though, but simply hard reset to recover and started again.
I think (although have not verified) that the BT Stack on the Rhodium has been updated to a Broadcom stack.
Can confirm that the above version works fine, great resolution and no issues using BT after install and with the new BT Stack you can now route all audio from the Rhodium through your hands free / car kit
Cheers,
Beasty
I did have a problem with v7.915.9196 where the device bootup was delayed by about a minute and a half (from 1m20 to about 3m from cold to starting Mobile Shell) which I had to get around by not installing the TomTom BT files.
I used TT7_915.9196_VGA__Negro.cab which does not appear to have the bluetooth files in it.
and this version could also be purchased on tomtom with ur chosen map on an sd-card? just to avoid having to hard reset and stuff after trying to install
thx.
I removed the bluetooth files from the cab with WinCE CAB Manager and installed tomtom agian, now everything works fine.
I'm now using tomtom version 7.450.9028 , i think it will work with other versions to
Thanks!
wonderful, great info now i have one less thing to worry about when my TP2 gets here thanks dude!
EDIT.: Pardon the perhaps n00b question, but i get an error while trying to run the .exe. is it meant for running on the phone or on the pc? i use winxp
hi my friends,
I'm getting real mad with this verizon tp2 gps,
this is the problem, i solved he problem with the gps lag in tomtom installing the moddriver app or using copilot, when i start the gps program, all work fine and really fast, but after 15/20 minutes of use, the program (copilot or tomtom) start to lost the gps fix and after a while is not more able to fix the satellite anymore (the back of the phone became real hot also), i have to close the program and restart but after few minutes it happens again and again...
i tried many different rom, the stock 6.1 and 6.5, energyrom and many other, all gave me the same problem....
the radio can affect the gps?
please help me, i need the gps badly...
thanks
p.s. usted the task29 app to clean completely the phone and now re installing the
"RUU_Rhodium_W_WM65_VERIZON_WWE_3.04.605.3_RS_2.23. 00WV_NV_VZW_1.94_1111_PRL58005_Ship.exe"
now i will try...
p.p.s. first freeze on copilot after 30 min o perfect working....