I'm having a bit of trouble. Whenever I get a text message or MMS the green notification LED doesn't turn to amber? Anyone know a way to get it to turn amber when a message is received?
Haha, I wish you were right and we had a problem. No, this is what we call a feature in the Excalibur. The LED doesn't turn amber at all when you receive a message.
The only way you can tell you have received a message is when the phone is charging and there's a steady green or a steady yellow. If a message is received, then it blinks green.
It's really annoying and pisses me off coming from the PPC world but that is just the way it is. If it makes you feel better, Treo 750 users have similar issues and that's a full blown WM5 phone.
There may be programs floating around that can change the LED upon certain triggers but the ones that I have tried don't really work. If anyone has any suggestions, I would love to hear them. We all know that the LED can blink yellow, green or red. It should just be a matter of software to get that going.
I have been using DontForget. It has the ability to turn off your LED and have it blink only when you have and email, or SMS or a missed call. Or, if you like to keep the normal flashing, you can set it to just blink faster when there's a notification. IMO this should be part of the OS. Get it at http://blog.softimage.cz/?page_id=83
I have also been using DF since Day 1 but it is kinda quirky. I would prefer to change the color of the LED rather than turn it off completely and have it flash faster (I mean how the hell do you distinguish the faster flashing from the slower flashing--I can't and I tried).
I've configured my DF to turn off the LED as well, i'm quite happy with it
Sweet! Thanks a lot for the help. It was a life saver
Related
My very first phone was a old Samsung that had a bright blue LED that flashed letting me know I had a new text message or voicemail or missed call etc. (You could see that thing flashing a mile away)
That is one feature I really miss because I often leave my phone sitting on my desk that Im not around very much and repeating notification tones are out of the question.
Is there a way to use the service LED's as notification lights?
I will PM you a link to get a good one... Just check your messages...
#2! said:
My very first phone was a old Samsung that had a bright blue LED that flashed letting me know I had a new text message or voicemail or missed call etc. (You could see that thing flashing a mile away)
That is one feature I really miss because I often leave my phone sitting on my desk that Im not around very much and repeating notification tones are out of the question.
Is there a way to use the service LED's as notification lights?
Click to expand...
Click to collapse
This is a fine program.
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
I know.. I'd like to see the low battery light and the bluetooth light flash alternating.
I think that is possible but I think you might have to edit some registry for that to occur...
what colors are all there? blue, green and orange? or are they multicolor led?
#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
You can stop flashing the green light.
Only when you have a message.
#2! said:
This program is cool. Thanks. Only problem is the flashing LED alert is too much like the phone service LED. Its stuck in my brain that slow flashing green light is meaningless. Any way to make it use the different colored LED's ??
Click to expand...
Click to collapse
I know that if you use a DontForget with PPC you get the choice of colour of LED "from reading there website" but not sure if possible on SP?
May be worth asking in general forum if anyone knows the reg settings needed?
This is not possible to manage LED (only blinking / off) on HTC s620.
jhwo99 said:
You can stop flashing the green light.
Only when you have a message.
Click to expand...
Click to collapse
That might work. Didn't think about that.
I still think it would be really cool if we could figure out how to get all the colors to flash or cycle through a patten.
I will try to look into it and see how it goes.
Morning,
Is anyone else finding their Notification LED for text messages (Possibly E-Mail's too) is flashing for 2-3 Minutes then stopping? Missed several texts now because of this and its annoying me that I have to keep unlocking my phone to check for texts.
Is there an option I have missed? Do I have a dodgy Phone? or is that just the way it is?
KYI
I think mine does this too, that's why I was asking for a Wake on Notification app. Can we change LED from green or orange via software?
O and O said:
I think mine does this too, that's why I was asking for a Wake on Notification app. Can we change LED from green or orange via software?
Click to expand...
Click to collapse
'Missed call' for the Market lets you (IIRC) change LED colour Whether is is fully operational on Desire, I'm not sure. Don't think you need root access either.
It's only flashes for about 2-3 mins then goes off - if you've not noticed by then I assume it thinks it'll save power...
makes sense to me to be honest. for example if u miss a text on the iphone, it will only chime once more. i wouldnt want mine staying on.
I Suppose I just miss it for the G1 days. My Phone is on silent all day at work and the continious LED was a bonus for notifications. Surely an single LED doesn't draw that much power? Might have to give Missed call a try again.
nah the desire seems to use different code to light up the notification LED so none of the LED apps on the market work anymore. like LEDtester, the LED just flashes green and cant be changed. and handcent, it just flashes green and cant be changed.
killyouridols said:
I Suppose I just miss it for the G1 days. My Phone is on silent all day at work and the continious LED was a bonus for notifications. Surely an single LED doesn't draw that much power? Might have to give Missed call a try again.
Click to expand...
Click to collapse
have it on vibrate instead - or just check the screen every now and then...
I did post about this earlier but got zero replies so I wondered if it was only me.
Mine blinks for I think it's exactly 5mins. That's it. And I don't think it has anything to do with saving battery since that one blinkiing LED (mostly blinking when then screen is off) does not take much power at all.
I've emailed HTC to see what they say.
Although not ideal, handcent does allow you to set notification reminders.
I have mine set to re-vibrate 15 mins after receiving a text if I haven't checked it. You can change all the options, so have it chime, vibrate, wake scree, flash LED, all of above, one of above etc. at different intervals and a number of times - I find once vibrating only to be a sufficient reminder if it's in my pocket, however if on a desk would probably have the screen re-awaken.
Might help.
-andrew.
Hello,
I just got a touch pro2 lastweek and I am beating my head trying to figure out what the deal is with the status notification LEDs
I see one to the LEFT of the earpiece/speaker that flashes green every few seconds and then just stops - all the flashing stops. I'm thinking the bliking stops when the phone goes to sleep. So i press the power to wake the phone - but the flashing doesn't come back. I was thinking this is the network/signal indicator but doesn't seem that way.
I see another that's to the RIGHT of the earpiece/speaker that doesn't go on at all.
So no way to tell if the phone is on wifi network or if bluetooth is on (without obviously waking the phone up and checking on screen). I'm looking for a way to see status without touching the phone - like my old HTC TyTn (rest in peace!)
It turns red when you charge you're phone.
It turns green when you are fully charged (with the charger still in)
It blinks green when you have a new message/e-mail/missed call.
It blinks red when you're batterie is almost empty.
That are the basics
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
armedmetallica said:
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
Click to expand...
Click to collapse
thats the light sensor for the screen
adjusts brightness depending on how much light is hitting the phone
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
jcterry said:
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
Click to expand...
Click to collapse
That's pretty much exactly it. There is a program floating around that allows you to change the light and customize the reason it flashes, but I think it's just fine the way it is .
it also flashed green then the red light really quick when its overheating :O
thanks for the quick replies folks.
I saw that in the manual too - but i never go by the manuals! i can't count how many times my manuals have been wrong about a particular function.
it's a disappointment since the older Tytn was much more friendly about the notifications. but i'll deal with it.
as far as that being a light sensor - i think it makes sense. I'll try trick it to see what I notice. Then I'm guessing it's the proximity sensor that's around the HTC logo? I think I was in the sun when I saw it but there's some sort of sensor around there. I figured that's the light sensor. perhaps not.
Thanks again!
I've looked around a fair bit and haven't found anything, but does anyone know of a good way to get a constant blinking status light on the Rhodium (specifically Tilt2)? My old Kaiser had a blinking green light to indicate network status, which was useful, not only for verifying that the phone was locked onto the cell network, but also for finding the phone at night, or in a pitch black room. Also, there was an excellent tool "kaiser notification" that let you configure all the different lights, and events attached to them.
I know all about the stock ways of adjusting the led notifications (for missed call, new text, new email, etc) but i wanted to know if anyone knows of a tool to customize the led notifications, or of any way to make the light blink continuously when the phone is sleeping, but connected to the cell network.
Thanks in advance for any input!
My main beef with the notification LED is that it blinks way to slowly, i have to stare at it for like 10 seconds to see if i have a text or not.
Light flow appears to not be compatible, as it causes the LED to be solid green whenever my screen is off (even if there's no notification), and Light manager partially works, (does not blink, and color is off)
Are there any other apps out there? I really just want to make it blink faster (frequency control)
Yours blinks? Mine stays on solid when I have any sort of notification. (Missed call, text, email, voicemail, etc...)
miztaken1312 said:
Yours blinks? Mine stays on solid when I have any sort of notification. (Missed call, text, email, voicemail, etc...)
Click to expand...
Click to collapse
hmm strange, u have stock at&t galaxy s3?
i'd never want mine to stay solid, i'd imagine there would be a significant drop in brightness after a few months, especially if i got a notification after i went to bed and it were on all night.
jefferson9 said:
hmm strange, u have stock at&t galaxy s3?
i'd never want mine to stay solid, i'd imagine there would be a significant drop in brightness after a few months, especially if i got a notification after i went to bed and it were on all night.
Click to expand...
Click to collapse
Yupp, all stock. And LEDs don't normally get dimmer until they are about to actually go out. Which takes a long long time. It's not like an incandescent lightbulb.
when i miss an email mine is solid green. miss a kik message solid purple. miss text message blinks blue.
I didn't configure any of this and can't even see how to.... I thought the system just was realizing different apps notify and changing it up.
interesting, my LED flashes blue for every type of notification, it just flashes like once every 8 seconds, which is just too slow.
Mine is solid as well, red when charging, blue for emails, and purple for almost everything else. I have a white phone as well.
If there are multiple notifications, it will pulsate through the different colours.
mrRobinson said:
when i miss an email mine is solid green. miss a kik message solid purple. miss text message blinks blue.
I didn't configure any of this and can't even see how to.... I thought the system just was realizing different apps notify and changing it up.
Click to expand...
Click to collapse
You can change the settings in Kik to get one of like 3 colors I think. I have mine set to white in Kik and it actually does come out white. I think the other two that work are red and blue. Pretty sure green is the only one that doesn't work.