Hello,
I just got a touch pro2 lastweek and I am beating my head trying to figure out what the deal is with the status notification LEDs
I see one to the LEFT of the earpiece/speaker that flashes green every few seconds and then just stops - all the flashing stops. I'm thinking the bliking stops when the phone goes to sleep. So i press the power to wake the phone - but the flashing doesn't come back. I was thinking this is the network/signal indicator but doesn't seem that way.
I see another that's to the RIGHT of the earpiece/speaker that doesn't go on at all.
So no way to tell if the phone is on wifi network or if bluetooth is on (without obviously waking the phone up and checking on screen). I'm looking for a way to see status without touching the phone - like my old HTC TyTn (rest in peace!)
It turns red when you charge you're phone.
It turns green when you are fully charged (with the charger still in)
It blinks green when you have a new message/e-mail/missed call.
It blinks red when you're batterie is almost empty.
That are the basics
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
armedmetallica said:
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
Click to expand...
Click to collapse
thats the light sensor for the screen
adjusts brightness depending on how much light is hitting the phone
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
jcterry said:
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
Click to expand...
Click to collapse
That's pretty much exactly it. There is a program floating around that allows you to change the light and customize the reason it flashes, but I think it's just fine the way it is .
it also flashed green then the red light really quick when its overheating :O
thanks for the quick replies folks.
I saw that in the manual too - but i never go by the manuals! i can't count how many times my manuals have been wrong about a particular function.
it's a disappointment since the older Tytn was much more friendly about the notifications. but i'll deal with it.
as far as that being a light sensor - i think it makes sense. I'll try trick it to see what I notice. Then I'm guessing it's the proximity sensor that's around the HTC logo? I think I was in the sun when I saw it but there's some sort of sensor around there. I figured that's the light sensor. perhaps not.
Thanks again!
Related
I noticed that Signal Reception Led is not blinking .
I can see it working sometime and sometimes not.
It is also same for bluetooth led. When I turn bluetooth on, blue led doesnt blink.
Is this hardware issue or software probkem? Can anyone help?
I dont think it has this function (the last device has this function if i'm not mistaken is htc tytn [hermes] ). Its only for notification like new sms, etc. like circle LED light on touch pro (raphael)
Light only flashes when it's told now. Doesn't flash for reception any more. For the record the TyTNII had it.
Mine flashes when I have a new text message or when GPS is on.
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
thank man. I was worried that there is a problem with my device which I received 3days ago.
neforce said:
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
Click to expand...
Click to collapse
There will be flashing amber light when remaining batt level is below 10%.
yeah, it goes blinking orange-like color. but it would be nice if it blinks red when it is nearly empty...
why does they always reject the good features....
I
sorry my ing., but i have a prob with my notification LED's.
i dont no what i do but i only have the red led notification, when i plug de AC power to charge.
the outher LED's dont do anything.
there is anithing to resolve this???
tks
What other LED's? There is only 1 led. It is red when charging or green when fully charged. Or green blinking for mail or sms or missed call. The little plastic on the other side is your light sensor.
yes, yes. that's my prob.
i only have the red when charging or green when fully charged.
i dont have the green blinking for mail or sms or missed call, etc.
I have the same problem: When charging, no blinking.
PqRambo said:
yes, yes. that's my prob.
i only have the red when charging or green when fully charged.
i dont have the green blinking , etc.
Click to expand...
Click to collapse
my led is not blinking too for mail or sms received or missed call
Hello
I found the solution to my problem.
after seeing what went wrong and where. I came to the conclusion that for some reason I got the option: flash light for ... = Disable.
all you had to do was go to:
- Settings
- Sounds and notifications
- Notifications
- Event (events with an option for flash light, put enable)
I hope I have helped.
thanks
exactly what I am looking for!
thanx for the tip!
greerz
Kjoere
This was already set at my TP2.
But when charging, it doesn't start to blink, it stays burning.
Well, ronh!
Now I have the LED notifications working.
It was enough, but in your case, I think, only just by changing a key in the registry or with a hard reset to see if everything returns to normal.
Indeed. the led charging is prior to led notification. So no notification when charging. Maybe someone knows a reghack for this?
Any hack to change the LED settings?
example:
blinking green to indicate signal coverage
blinking amber for missed calls, message etc.
Pretty useful if we're in a rural area and need to quickly see if we have coverage or not without turning the phone on.
posted a similar request here: Posted a similar request here:
http://forum.xda-developers.com/showpost.php?p=4306289&postcount=9
PqRambo said:
yes, yes. that's my prob.
i only have the red when charging or green when fully charged.
i dont have the green blinking for mail or sms or missed call, etc.
Click to expand...
Click to collapse
ronh said:
I have the same problem: When charging, no blinking.
Click to expand...
Click to collapse
Did anyone find a solution for this problem? My TP2 has no notification LED when it's charging.
It's driving me crazy. I never know if I have Email until I unplug the TP2. My Treo blinked like mad, plugged in or not.
The blinking LEDs either side of the speaker don't work.
The one on the right which I believe blinks red to indicate notifications and missed calls have never worked and the green one on the left which shows you have reception has stopped.
As far as I can tell all is as it should be in the settings.
The one on the left of the earpiece is the LED, the right is the light sensor that adjusts your screen brightness. Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
how many threads in how many device forums till everyone knows thats not an led. it even says light sensor in the manual.
Oops silly me. RTFM.
Thanks for getting back to me.
TubThumper said:
The blinking LEDs either side of the speaker don't work.
The one on the right which I believe blinks red to indicate notifications and missed calls have never worked and the green one on the left which shows you have reception has stopped.
As far as I can tell all is as it should be in the settings.
Click to expand...
Click to collapse
Hi
the same was here. SOLVED Browse trough this link http://forum.xda-developers.com/showthread.php?t=460368 . Simply place 31 instead of present any number
Majjjjo
Majjjjo said:
Hi
the same was here. SOLVED Browse trough this link http://forum.xda-developers.com/showthread.php?t=460368 . Simply place 31 instead of present any number
Majjjjo
Click to expand...
Click to collapse
that wasnt his issue, he had mistaken the lightsensor for an led.
Hi there, I am currently running Cyanogenmod 7.0.3 on my HTC Desire Z and having some issues with the notification led in the speaker:
Why, when battery is nearly flat (under 10%) no LED blinks and if I receive a text the green one keeps blinking unless I reboot the device?
I would like to have the amber LED blinking when battery is dying. I already tried LED ME KNOW but works for a while than stops especially after a reboot.
Thanks in advance.
La Rascassa said:
Hi there, I am currently running Cyanogenmod 7.0.3 on my HTC Desire Z and having some issues with the notification led in the speaker:
Why, when battery is nearly flat (under 10%) no LED blinks and if I receive a text the green one keeps blinking unless I reboot the device?
I would like to have the amber LED blinking when battery is dying. I already tried LED ME KNOW but works for a while than stops especially after a reboot.
Thanks in advance.
Click to expand...
Click to collapse
The blinking LED under 10% is just going to happen. Not sure how you'd change it, as the function is built into the ROM.
The trackpad should still pulse properly when you receive a message though.
Thanks for your reply martonikaj, anyway the speaker led seems to go crazy when battery goes under 10%!
Now, I received a text 15 minutes ago, read but the green light still blinks.
I simply would like to have the amber (or a red) Led blinking to remind me, when I'm not using the phone, that I have to recharge it!
Anyone is experiencing the same issue as me?
EDIT: Seems that someone else has the same problem here, with no answer either:
http: //code.google.com/p/cyanogenmod/issues/detail?id=3260
mine's the same way. I have a consistent green speaker LED blinking under 10%.
I just never really get under 10% that often so it doesn't really bug me.
martonikaj said:
mine's the same way. I have a consistent green speaker LED blinking under 10%.
I just never really get under 10% that often so it doesn't really bug me.
Click to expand...
Click to collapse
I realize that the green led doesn't blink to advise you that your battery is nearly dead but simply because, after reading a text or other notification, the device cannot "get rid" of the green light. In fact if you reboot the phone it goes away and doesn't show up unless you receive another notification.
La Rascassa said:
I realize that the green led doesn't blink to advise you that your battery is nearly dead but simply because, after reading a text or other notification, the device cannot "get rid" of the green light. In fact if you reboot the phone it goes away and doesn't show up unless you receive another notification.
Click to expand...
Click to collapse
Well its not that it cant get rid of it, its that the system tells it to blink the LED lower than 10%, and that's overlapped by the fact that the notification also blinks the LED green. So after the notification LED pulse is gone, it just continues because the system picks up where the notification left off.
Either way, yes, its a bug.
martonikaj said:
So after the notification LED pulse is gone, it just continues because the system picks up where the notification left off.
Click to expand...
Click to collapse
Not in my case. If I don't receive any notification the green LED doesn't blink, even under 10%.
martonikaj said:
Either way, yes, its a bug.
Click to expand...
Click to collapse
You are 100% right! As far as I know it hasn't been solved yet. CM 7.1 RC still have this problem.
Hello.
Is there supposed to be a light for when the device is charged?
Mine shows no notification of either plugged in and charging, or when at 100%?
Cheers
you should see a lightning bold in the battery icon when charging
Yeah, cheers.
I was meaning with the screen off. All my other Android phones had a notification light when charging (ie red, then turned green once fully charged).
sparks7 said:
Yeah, cheers.
I was meaning with the screen off. All my other Android phones had a notification light when charging (ie red, then turned green once fully charged).
Click to expand...
Click to collapse
use this app
https://play.google.com/store/apps/details?id=com.rageconsulting.android.lightflowlite&hl=en
I had assumed there would at least be a sound considering the 3rd setting in my screen shot, but there's not.
As for light flow, I used it a lot on my N5, but I tried it on my 5X and there were some issues.
First, there's the persistent notification... It's the way LF uses to keep the app running in the foreground, but there's a LF notification always in the pull down AND that screws with ambient display. If you turn that setting off in LF, the app stops working within 20 minutes of the screen being off, defeating the purpose of having a light blinking to let you know it's charging.
Second, not so much LF's issue, but you can't make the LED light up certain colors like orange. Regardless of shade, it all comes out yellow.
I'm really surprised that Google didn't add something for a charging indication using the LED...
Yeah, cheers for that.
At least I know its not just my device.
gotzaDroid said:
I had assumed there would at least be a sound considering the 3rd setting in my screen shot, but there's not.
As for light flow, I used it a lot on my N5, but I tried it on my 5X and there were some issues.
First, there's the persistent notification... It's the way LF uses to keep the app running in the foreground, but there's a LF notification always in the pull down AND that screws with ambient display. If you turn that setting off in LF, the app stops working within 20 minutes of the screen being off, defeating the purpose of having a light blinking to let you know it's charging.
Second, not so much LF's issue, but you can't make the LED light up certain colors like orange. Regardless of shade, it all comes out yellow.
I'm really surprised that Google didn't add something for a charging indication using the LED...
Click to expand...
Click to collapse
try out LightFlow LED