Hi All,
Got an ex-T-mobile MDA Vario coming via ebay to replace my HTC Typhoon.
I want to add the AKU2 and A2DP features to it and debrand it, so am thinking the Mr Clean ROM is the way to go.
Have spent ages going through these forums and I *think* I know what I'm doing but would appreciate some confirmation.
However, I'm not sure if I'm going to have the phone's device lock code (i.e. the PIN you put in to lock/unlock the phone via the security "Device Lock" menu - have asked the seller for this but if they're not sure then I don't want to test it as if I get it wrong the phone's a brick!). Does ROM flashing replace this, and if so, what's the default?
Also, are there any caveats with the ROM upgrade? Was going to check with Lokiwiz that it's unlocked (think it is already) and CID unlocked (is this the same as application locked on WM Smartphone?) and then run the Mr Clean ROMupdateutility_wizard_noid.exe - am I missing anything here?
Lastly, I'll be using it on Vodafone UK so I'm presuming all I need to do is manually set up the SMS/GPRS/MMS etc.
Can anyone give me some pointers?
Ric
Related
Hi Guys and Gals,
so spend all day surfing through this postings here and could not find a reliable way to put the T-Mobile WM6 update on to my Original unbranded and UNLOCKED HTC 620.
Found one post about using some patching including IMEACHECK as the passwod... but can use that as it talks about unlocking , which I dont need ... or do I...
Thnaks for all the help in advance as this will hopefully not only me, but also others seeking to do the same...
Cheers
Hi,
you can do the update in the exact way described here (you need the imeicheck unlocker and a unlock key for your mobile).
Newchurch
Newchurch said:
Hi,
you can do the update in the exact way described here (you need the imeicheck unlocker and a unlock key for your mobile).
Newchurch
Click to expand...
Click to collapse
Thats the one I am refereing to it dont work... still said that i need another updater...
does any one else know how to get this done
Can you tell what's the steps you are taking and what's giving the error in details? I upgraded two units with the process and have no issues.
Keep in mind, unlocking the phone via imei-check or other sources is necessary, as you need to CID unlock the unit, which the unl file and dashv2unlock.exe does. My units were both SIM unlocked, but for the upgrade process you have to CID unlock it too, as you are using a ROM from a different provider. Also don't forget to patch the updater and nbh files, exactly as listed.
palmop said:
Can you tell what's the steps you are taking and what's giving the error in details? I upgraded two units with the process and have no issues.
Keep in mind, unlocking the phone via imei-check or other sources is necessary, as you need to CID unlock the unit, which the unl file and dashv2unlock.exe does. My units were both SIM unlocked, but for the upgrade process you have to CID unlock it too, as you are using a ROM from a different provider. Also don't forget to patch the updater and nbh files, exactly as listed.
Click to expand...
Click to collapse
I did all mentioned including the patching of the files except the unlock part as my device came straight from HTC. Are u meaning that although this is direct from HTC that I still have to go through some unlocking steps ?
what is this unl file and the dashv2unlock.exe ????
Thanks
Yes, as I stated in my previous post, your device needs to be CID unlocked, and HTC devices are CID locked (SIM lock or in other words network provider lock is different, I know HTC devices are SIM unlocked).
CID locking will prevent you to apply different provider released ROMs. Simply go to http://www.imei-check.co.uk/dashunlock.php (or another Dash CID unlock provider), supply your IMEI, make the payment, and you'll receive access to two files:
dashv2unlock.exe - The application to run on PC to fully unlock the unit
yourimeinumber.unl - Unlock file generated by imei-check, specific to your unit's IMEI number
And follow the info to the point. It will work then. I used it on two Rogers HTC S621 units, both were SIM unlocked, CID locked.
I'm completely new to unlocking and flashing cooked ROMs on phones, though I've done similar things on other devices (nothing PDA-like though). And I'm confused about what unlocking does, vs. flashing a cooked ROM.
I understand that unlocking the SIM let's you use any carrier's SIM, and unlocking the CID allows you to flash any ROM -- I assume those settings aren't stored on the ROM then?
If I unlock a phone, then do the official upgrade to WM6, will it remain unlocked (still branded, but unlocked)? Can't the cooked ROM unlock the phone also?
This part probably belongs on a separate thread -- I get what the ExtROM is, but what's the Radio, etc.?
(PS: I looked at all the wiki's I could find on this site, and on several others, but all just described how to unlock or flash, not the workings of it. Maybe I'm blind though, so sorry if I missed a wiki!)
radio == gsm radio == whats makes the pda a pda phone
A quick explanation on the SIM / CID unlock:
It is correct that SIM unlocking lets you use SIM from any carrier, but CID unlocking does not let you flush "any ROM".
You still have to use a ROM designed for your device with the specific drivers in it or you will brick the thing.
CID lock prevents you from re-branding (i-mate Jamin and O2 Neo are same device but you can't use O2 ROM on i-mate device unless you CID unlock it) or changing OS language (through different language ROM).
Both SIM and CID lock values are located in a special part of memory where the phones IMEI also resides. This area is checksumed and is not affected by ROM changes.
So no, cooked ROM can not unlock the phone, you need to unlock first then flash a cooked ROM.
That helps a lot, thank you both!
A radio upgrade could potentially yield a better signal and faster speeds ... cooked ROMs offer the software aspect ... ExtROMs, again software; with the SIM/CID locks on separate memory inside the phone ...
Well, I think I'm ready to try to unlock the phone and load some nifty software on it ... got my fingers crossed I can get one "cheap" that is already unlocked, but they are, from what I'm seeing, usually $150 more than locked ones. I'd rather unlock it myself!
How to upgrade and install WM6 for Qtek 9100?
I am New to this software field. I want to know how to flash the rom and upgrade devices [K-jam,Jamin,Qtek 9100,Qtek 9000 ect...]
can some one plz tell me the steps to do these things??
I already have a few of the other HTC phones, wizard - tornado and typhoon, so have gone through the CID unlocks, rom upgrades, etc.
I have a co-worker who got their hands on a used Excalibur / T-Mobile Dash, which is sim locked to T-mobile ( I know there is a post here where we can get the codes from one of the members )
The phone itself has a password required when it boots up. That password is not available. Co-worker has asked if I can do anything to help. Before I give him back a brick, figured I should ask......
Will I be able to sync with activsync to be able to add the files needed to CID unlock the phone ??
Once CID unlocked - we can then upgrade from bootloader screen ??
Is there any other work arounds out there - to me, just seems easiest way is to flash new rom ??
Any feedback greatly appreciated - thanks in advance
Have a good one
Bill
So, I'm getting my first WinMo phone this week, an X02HT--presumably still locked to Softbank. My understanding is that I'll need to SIM-unlock it, and there is also some further software unlocking necessary?
Ideally, I'd love to keep the stock firmware on it, since it's bilingual already...I don't care about no MMS (the only limitation I've been able to find). For what it's worth, I'll be putting my ATT 3G sim in it.
So, just to clarify--I need to SIM-unlock it, and nothing else is necessary? Any recommendations on where to get the SIM unlock code?
Also, I read that people had to put new software on in order for the unlock code to be accepted?!
Forgive the confused newbie...I'm coming from the simple world of an unlocked Symbian phone
Edit: Fantastic, I forgot to fix the title before posting...good show.
So, I think I've answered my own first question in that I'll need to install the Japanese-only test-ROM in order to input the SIM-unlock. After doing so, how do I roll back to the original ROM, so that I may use the English-language functionality?
Hi every one, my phone model is HTC Hermes 8525 locked to Att. Now it is in original box with Windows Mobile 5. I want to unlock it first. I have read articles on this BBS and aware that if I want to do future Rom flashing things I might need both SIM and CID unlocked. At same time I found several unlock code provider on Ebay.com. Now the questions come up.
1) Is Unlock code got via Ebay only for SIM unlock, or it is for both?
2) Is there any risk for such kind of unlock code for my phone? What's the worst outcome for using unlocker software downloaded here?
3) If I don't unlock my CID, can I still upgrade my phone with WM6? What specific ROM of WM6 shall I use?
4) Any other suggestion is welcomed, Ad's also.
Thanks a head
bopomofo said:
Hi every one, my phone model is HTC Hermes 8525 locked to Att. Now it is in original box with Windows Mobile 5. I want to unlock it first. I have read articles on this BBS and aware that if I want to do future Rom flashing things I might need both SIM and CID unlocked. At same time I found several unlock code provider on Ebay.com. Now the questions come up.
1) Is Unlock code got via Ebay only for SIM unlock, or it is for both?
2) Is there any risk for such kind of unlock code for my phone? What's the worst outcome for using unlocker software downloaded here?
3) If I don't unlock my CID, can I still upgrade my phone with WM6? What specific ROM of WM6 shall I use?
4) Any other suggestion is welcomed, Ad's also.
Thanks a head
Click to expand...
Click to collapse
Hi and welcome to xda-developers forum!
1) I think this "unlock code" will provide you an ability to disable/re-enable SIM Lock/Operator Lock, not CID Lock (as it's platform specific and required to flash unofficial ROMs)
2) The worst is device will become brick. But it could occur only if you download and flash wrong ROM.
3) No, if it's unofficial. If HTC provided a WM6 update to Hermes (I don't remember), it could be flashed.
Good luck
respond
i just got that phone, i found a guy on youtube for the sim unlock, it worked for my phone , now it runs a tmobile sim card ya. not sure what cid a nd all that is, on youtube most people dont give details on how to get things done but there is the one guy for the sim. next i upgraded to wm6 using a google search and deciphering through all the bull****, then i used xda for wm6.1. it all worked and i dont know **** so u should be fine, if you know how to unzip and do things with files and alwas look for exe. extentsion, that ones usually money, im trying to upgrade to 6.5 but im getting errors, first time im having propblems, so let me know anybody, about that. good luck
What phone do you have?