Develop Bugs

WM6 Voice command

Hello, on wm5 I used to be able to assign a voice command to 2 set a voice command for varios applications. For example I have media player set to start media player.
I cant seem to get this to work on wm6
Anyone else ?

Figured it out
Ok, I feel like a tard.
instead of voice command needing to be trained, it reads the program name.
Wich is kind of lame because on wm5 I would jsut say media.
and now i have to say start media player.
...
any comments on this ?

Under WM5 voice command was the same as under 6, are you sure it wasn't voice commander you were using?
With voice command you can say "play [media|album|genre|artist|anything]" if you say "media" it'll ask you for which one you want to play, for album, artist & genre it'll prompt you from the ones in your library.
Finally, you could rename the short cut to "media" and then you'll be good to go

Voice Commander?
Well, it was something default from the tmobile wm5. I could click the right soft key when an application was highlited and say add voice command.
Im curious about this voice commander though, I use the phone media player when i snowboard and that sounds like something awesome to be able to choose genre, playlist etc.
Where can i download it ?

I broke it.
I dont know why , it voice command was working fine. I changed the registry key
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway
from OEMAGW.dll to bthag.dll
and rebooted.
after doing this when i hold the home key down it brings up a recording menu to record voice notes I guess.
I changed the registry key back to OEMAGW.dll and rebooted.
The same thing happens . only opens up some record thing.
Can somone explain how to get his work again ?

Reloaded
Just said screw it after mucking with it for a few hours. Perfomed a factory reset and started over.
Wishing i had sprite or something. but its nice to have it all clean and a fresh load of apps....

Visual Voice Mail not working correct

Alright, I'm not exactly sure how to search for this or not but I've been flashing a few roms and now my visual voice mail doesn't work correctly. I've been getting txts from visual voice mail for voice mail but when I installed visual voice mail (verizon version) it opens and says my phone has built in features to do this and wants to close the app. I did have youmail installed on it before as that worked just fine and I'd used it with my BB. I uninstalled and reinstalled both but still no luck. Any idea?

http://forum.xda-developers.com/showthread.php?t=915138
Please try searching

Ok, tried to change that file. Can't make modifications because it looks like the file is being accessed. Thanks.

You need to ADB push it

Ok i tired to adb push it but the file seems to be in use and I can't change it. Is there a specific state that system has to be in. I noticed for other commands it does need to be but I didn't see anything stating what to do to for a push.
Thanks.

Never mind, sat down and tried again for a bit and figured it out. I'm a dumb ass don't worry.

[Q] Bluetooth doesn't recognize contacts

I have only had this phone for ~1 week now, but just ran into an issue with bluetooth connectivity. I have paired my phone with my 2011 Jetta SE and have a successful connection. I can play music and receive calls just fine as well as make calls (but only by initiating it from the phone itself). I was able to voice dial once, but then never again. I have removed and re-paired the phone to the car multiple times. When I ask the voice dialer to read my contact list, it only comes back with a single contact called "My Name." And not my name, literally "My Name." It is my phone number attached to that contact as well, but doesn't exist on my phone, unless it is referring to "Me," the contact the phone book asked me to set up when I first used the phone. But besides that contact, I can't voice dial anyone, which makes things very difficult. I have't found any other cases where bluetooth only pulls this one contact. When I pair the devices, I do get the pop-up that the device I am connecting to wants access to my contacts, and I grant it. Any ideas?
Info:
Verizon Galaxy Nexus
4.0.4 Stock
Rooted
Bootloader Still Locked
No CWM installed

I get this a lot to. I have a 2009 BMW X5 and have no trouble pairing the GNex to the vehicle, and grant the addressbook query. Everything works (I can see all my contacts and use them). Next time I get in the vehicle I may, or may not have contacts. The only way to fix is to delete the device and re pair. For some reason, the addressbook does not stick permanently. It's annoying. Running stock 4.04 with Franco's M3 kernel, but the same problem was there before I changed the kernel. Any suggestions?

Next Step?
Now I'm realizing that I can't really get rid of the connection profile for my car. Is there a specific system app I can clear data from to reset bluetooth? That is all I can think of trying at this point.

[Q] Transferring phone contacts into Pioneer DEH-X6600BT

It's not happening and I am frustrated.
I just got this system installed two days ago. My Bluetooth connects and I can play music and answer or make calls, but my contacts and phone history will not sync over to the receiver.
I click yes on the dialog box when it asks to transfer the information, but it never transfers. I called Pioneer once but the rep was not much help. He suggested I delete the phone from the receiver and start over again. I did that. I called the installer and he suggested I do that as well as turn Bluetooth on and off. I did that.
I am going to go see the installer Monday if I can't get it figured out. It appears I am doing everything I should be doing but it seems the phone is blocking the transfer. I even tried selecting all my contacts and sharing them with Bluetooth and then the receiver but the send file fails.
Any suggestions as to what might be blocking this sync?

Hey I have the same deck as you and what you are trying to do is not possible for the time I spend with it and if you did manage to sync them what are the benefits? Look at your contact list when you leave your phone behind but can't do anything with said contacts because you don't have a phone? Doesn't make much sense right.
That dialog box that comes up when you first pair with the deck is asking you permission to access the phone contacts and not download/sync them.
When your phone is connected you can push the phone button and will let your scroll through your contact list and press the button again to call. Well that's all I remember what to do when I used the phone part of this deck, which is not a lot.
Hope this cleared some things up.
Also if I'm completely off base and you are having trouble with the contacts not displaying or showing when someone calls, then you got a bad unit.

max53389 said:
Hey I have the same deck as you and what you are trying to do is not possible for the time I spend with it and if you did manage to sync them what are the benefits? Look at your contact list when you leave your phone behind but can't do anything with said contacts because you don't have a phone? Doesn't make much sense right.
That dialog box that comes up when you first pair with the deck is asking you permission to access the phone contacts and not download/sync them.
When your phone is connected you can push the phone button and will let your scroll through your contact list and press the button again to call. Well that's all I remember what to do when I used the phone part of this deck, which is not a lot.
Hope this cleared some things up.
Also if I'm completely off base and you are having trouble with the contacts not displaying or showing when someone calls, then you got a bad unit.
Click to expand...
Click to collapse
Thank you Gilbert for the reply.
When I push any of the phone menu buttons, I don't get any information. It just says "transferring."
I decided to call Samsung yesterday and twice got on remote access, but both times I hit the wrong button on my stereo and the calls were lost. When I called the third time I started speaking with someone who was going to get me back to the remote access department and he asked me how many contacts I was trying to sync over. I told him about 1,800. He said, "Whoa, I can tell you from experience that generally car stereo receivers only sync up to 900 contacts."
So, I worked all night last night on my contacts. They were a mess and even if this doesn't work the guy did me a huge favor because I was able to shave my contact list down to 564 and unlinked them all from old Verizon backup assistant and Microsoft Exchange contacts. It was an ugly job that truly needed to be done.
Anyway, I have not tried to allow access yet. I am going to try in a little while and then I will report back in.

Well, it's been ugly, but things are working out .... weirdly!
After cleaning up my stock contact app, the contacts finally became visible but they are still being linked in with Microsoft Outlook contacts. I have tried every which way for them not to show up. I even deleted everyone of them from my computer and they are still showing up when I Bluetooth the stereo.

Well at least you got it working for you and seemed like you overwhelmed the unit with all those contacts.
But I find that strange that you can't get those contacts from showing up. So you deleted those outlook contacts from your computer but did you on the phone? Also have you disabled contact sync of the outlook account in the settings?
Also you could try to unpair your phone and pair again and see if that helps.

Calling Out

I did a software update two days ago and I just found out this morning that I can no longer call out. What should I try? I Googled and have looked for a Call Barring setting, but I can't find it yet.

Do you get any type of error message? I use Googles's dialer app and the first call I made after the update I tried from contacts and got an error that I didn't have permission. I then opened up the dial pad and got the "allow permission" pop-up. Look at the phone app in Settings>apps and make sure the permissions are on and change system settings is allowed.

Tel864 said:
Do you get any type of error message? I use Googles's dialer app and the first call I made after the update I tried from contacts and got an error that I didn't have permission. I then opened up the dial pad and got the "allow permission" pop-up. Look at the phone app in Settings>apps and make sure the permissions are on and change system settings is allowed.
Click to expand...
Click to collapse
It took a while yesterday morning, but the problem has been solved.
It started with Total Wireless, who is my service provider. To their credit, they had me try some things, but when we got to the point of a complete hard reset. I decided to hold off on that.
I then used Samsung support chat. They eventually has me try the Safe Mode. I didn't even know about that. My S9 called out just fine on Safe Mode. So, I was advised it was being caused by one of my apps. I had just done an Android OS update two days earlier, but I didn't think I had added any new apps recently. I deleted a number of them until I got to Call Confirm. Then it hit me. The behavior of the phone was similar to Call Confirm, except it never asked me to push a Call Confirm button to place the call. I deleted Call Confirm and the problem was solved!
Thank you for the response!