MaUpgradeUt_noID.exe and Qtek (error 120) - JASJAR, XDA Exec, MDA Pro Software Upgrading

could somebody explain me hot to exactly remove this country Id Error.
I read the wiki article and excecuted it step by step. nothing.
First of all i have a QTEK 9000 with latest qtek rom. My bootloader version is 1.00. These are my steps. Does somebody recognizes the mistake
1. Firewall is disabled
2. Activesync 4.2 doesn't allow USB connections
3. Device is connected directly to the usb port
4. When in bootloader mode the device is recognized as smartphone
5. When i start MaUpgradeUt_noID.exe i get NO overview on what is the version number of the firmware etc.
6 I wait >5 sec and press update.
7. the upgrade tool says "congratulations" please hard reset
8. I hard reset the device.
9. when I try to install IVANs AKU 3.2 rom i still get error 120
Any advices???

you have to unpack the aku 3.2 en then put the MaUpgradeUt_noID.exe in the same folder where you unpacked the aku3.2 and then it will use the cabinets to upgrade, what you did at first is, you run the MaUpgradeUt_noID.exe, but that exe file needs the aku3.2 files..
steps you have to take are:
1. unpack IVAN AKU 3.2 rom
2. put MaUpgradeUt_noID.exe with the aku 3.2 files
3. Activesync 4.2 doesn't allow USB connections
4. Device is connected directly to the usb port
5. Put device in bootloader mode
5. start MaUpgradeUt_noID.exe
6. you know the drill... should install in about 30 to 50 minutes...

Related

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

Help (Please) on unlocking an Orange SPV m600

How can i unlock my Orange SPV m600
I have read the various threads and tried the couple of unlocking tools but neither of them work (version 1.5 or 1.6) keep giving me the same error
Any help would be much appricated ~ Can someone please give some assiatnace
Ian
UPDATE:
Just tried to unlock using the lokiwiz ~ Still unable to unlock the device
instrustions with the above program are below
Re: UNLOCK YOUR I-mate JamIn, Qtek S200, XDA Neo, Orange M600 ( #9147603966).
1. Download the software
Here is the hyperlink of the software: http://cheap2run.com/Lokiwiz03.zip
The commpresed file is about1.5 MB, so if you are using dial-up Internet connection, it can take a while
2. Unzip commpresed file
Since the file is compressed, you will need WinZip to uncompress this file.
If you have got this software, you can Winzip for FREE from http://winzip.com/downwzeval.htm
3. Instructions
Once you uncompress this ZIP file, follow the instructions on the zip file (read_me.txt)
Kind Regards
ArianSh
HOW TO USE: (same instructions as in read_me.txt)
1. Unzip lokiwiz03.zip to somewhere in your computer
2. Guarantee that your phone is connected via ActiveSync with the computer
3. Execute lokiwizMSL.bat on your computer.
4. It will give you the SIM unlock code after it runs, just get a DIFFERENT SIM from the one your phone is locked to and insert the code...
ANOTHER UPDATE ~ JUST TRIED THIS ONE TOO
1. Download the different version of software
Here is the hyperlink of the software: http://cheap2run.com/Lokiwiz02b.zip
The commpresed file is about1.5 MB, so if you are using dial-up Internet connection, it can take a while
2. Unzip commpresed file
Since the file is compressed, you will need WinZip to uncompress this file.
If you have got this software, you can Winzip for FREE from http://winzip.com/downwzeval.htm
3. Follow Instructions
1 - Unzip lokiwiz02b.zip to somewhere on your computer
2 - Connect to your phone using active sync
3 - Copy EnableRapi.cab to your Phone (any folder, I suggest my documents)
4 - Run the EnableRapi.cab on your phone. Wait for it to finish
5 - Ensure that your phone is still connected via ActiveSync with the computer
6 - Run lokiwiz.bat on your computer and follow the instructions on your screen...
7 - Press U to unlock your phone, then wait untill your phone soft resets itself.
STILL Locked ~ CAN SOMEONE HELP? PLEASE !!!!!!!!!!!!!
get the Lokiwiz03a, i use it to unlock my m600. good luck

HELP - hx2110 dead after upgrading to WM6.1

I download the WM6.1 from following link:-
http://forum.xda-developers.com/showthread.php?t=383173
but my unit was dead after flashing the ROM.
- the unit can turn on but never ending on the startup screen.
- the unit can enter BootLoader but the computer can't recognise it, so i can't re-flash it any more.
I have tried to uninstall the ActiveSync and re-install it but helpless.
Can anyone help?
Thanks.
No Panic
tangwd898 said:
I download the WM6.1 from following link:-
http://forum.xda-developers.com/showthread.php?t=383173
but my unit was dead after flashing the ROM.
- the unit can turn on but never ending on the startup screen.
- the unit can enter BootLoader but the computer can't recognise it, so i can't re-flash it any more.
I have tried to uninstall the ActiveSync and re-install it but helpless.
Can anyone help?
Thanks.
Click to expand...
Click to collapse
Many people experienced identical problems with hx2110/2115/2410/2415, wm2003se, having 64MB Rom, when try to upgrading wm6.0/wm6.1
Come here, no Panic......
http://forum.xda-developers.com/showthread.php?t=383173&page=36 info in post #353
You must read carefully to understand the guides in further Threads introduced, and proceed with patience...
Sure you'll make it.....Like me....hx2110 to any wm6.1
HKKSL, YOUR ADVISE IS REALLY HELP,THANK YOU VERY MUCH.
Upgrading HX2110 to WM6
--------------------------------------------------------------------------------
Okay, I've finally got WM6 on my HX2110. For any other people having the same problems I did, here is exactly what I did. What the guides I've found don't tell you is where to find it, and what to do when you get it. Basically you need to trick the iPaq into thinking it's getting the original 1.00.00.l firmware and then switch firmwares. You need to downgrade to the original H firmware before the iPaq will accept wm6. This worked perfectly for me after two days of trial and error. More detailed steps are below, but basically its: flash with 100l, reset, run 100l and swap firmware with 100h, flash, run 100l and swap with wm6, flash
Prerequisites:
Advanced_pack_for_hx2xxx_to_WM6
iPaq HX2110
USB connection to computer
1) Hard reset iPaq. Do this by holding the calendar button and itask button (curved arrow), and then put your stylus into the reset hole on the bottom of the iPaq. This will hard reset it.
2) After doing that, put it in to bootloader mode. You do this by holding the contact button (to the right of the calendar) and the itask arrow, and then clicking the reset button on the bottom. It should now be in bootloader mode. unplug the power/usb cable and plug it back in. hit the calendar button. it should now say USB.
3) run hpRUU.exe under the Wm5.0 for hx2000_1.00.00.L_ENG folder. It's found in provishki. it will flash your ipaq to 1.00.00.l . let it flash all the way.
4) hard reset the ipaq and put it in bootloader mode. see steps 1 and 2. make sure it says USB.
5) do step 3 again, but this time don't click upgrade. rename the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file to 100l.nbf
6) go into the SP32408_1.00.00.H_ENG folder and get the NBF file from there. copy it into the 1.00.00.L folder that we were just in. rename is to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf. click upgrade. let the upgrade finish.
7) repeat steps 1 and 2.
8) delete the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file that you just copied over and rename the 100l.nbf file to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf.
9) run hpruu.exe again. DO NOT CLICK UPGRADE.
10) get the wm6_wwe.nbf file and copy it into the directory we were just in. rename E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf to 100l.old and wm6_wwe.nbf to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf
11) click upgrade. let it finish.
12) repeat step 1
you should now have Windows Mobile 6 on your iPaq. Good luck
--------------------------------------------------------------------------------
Last edited by jsbarone : 29-02-2008 at 05:06 AM.
Click to expand...
Click to collapse
Complete package for upgrade hx2xxx to WM6
--------------------------------------------------------------------------------
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Click to expand...
Click to collapse
I have succeed in upgrading my hx2110 to wm6.1 as per the above instruction.
I am wondering why there's extra files and folders in that package that we never used it?

Problems installing, wm6.5

hello all,
i was about to install wm6.5, but i cant get it done.
Mobile: Htc touch diamond (ofcourse)
Rom: 1.37.172.3 NLD (i went to this thread: http://forum.xda-developers.com/showthread.php?t=400402 , and did everything they said, and the rom update was succeful.. so i dont understand why my mobile says its this rom.)
radio: 1.00.25.03
I followed this steps:
How to install the Windows Mobile 6.5 in your HTC mobile
This howto was conducted on GSM HTC Touch Diamond. For all other HTC sets running the Windows 6.5 the consequences will be the same.
Requirement
HTC Touch Diamond or Touch Pro (GSM only)
Windows Mobile 6.5 ROM (Choices: Diamond , Pro )
Account at XDA Developers(free)
Windows PC set up to sync with your handset
Device flashing utility
bootloader(Diamond , Pro )
Device Radio (Diamond , Pro ). Ensure that you download the Original list.
Now, if you are done with the requirements its time to back up with your contacts and personal info. For this you might take the help of Microsoft's free online service called My Phone. Remember, the installation would remove the software installed in your device, so don't forget to keep a back up.
Install the bootloader
What you need to know is that you are installing an unofficial softwar, something that your mobile phone is not used to do. To begin with install a new bootloader hardSPL on the device. This will allow your handset to accept third party services like the Windows Mobile ROM. Go ahead with the steps
Step 1: Connect your mobile phone to your Windows PC. Establish the ActiveSync (on XP) or Sync Center (on Vista, or Windows 7) connection to your device. Make sure the connection is active. To check this see if there is a bidirectional arrow in your Phones taskbar.
Step 2: Extract the bootloader you've downloaded and note the location
Step 3: Now find the extracted files and run the executable file ( it is usually called ROMUpdateUtility.exe)
Step 4: Follow the instructions. The software will perform a number of checks. You must make sure you have the following
i) The handset has 50 % battery life in your phone
ii) The correct bootloader
iii) host computer that doesn't go down
Step 5: Can you see the paired progress bars on your phone and computer screen. This part of the process doesn't take long as it is a small piece of software.
Step 6: Now Restart your phone. The small text will appear in the corner of your Windows Mobile splash screen. This might be unfamiliar.
If the utility runs completely, the device will be restarted on its own.
Install a new device radio
Installing a fresh Radio onto the device usually won't make much of a change in how your phone works. Some radios can improve reception on certain networks. Let's get on with the technique
Step 1: Connect your phone to the PC
Step 2: Extract the download radio files and note their location
In case, the radio comes with a bootloader, jump to step 5
Step 3: Extract the downloaded bootloader, using the location
Step 4: Copy the extracted radio file, with an .NBH extension to the directory where you have placed the bootloader
Step 5: Run the bootloader
Step 6: Perform the instruction in step 4 and 5 provided in the bootloader installation procedure
Step 7: Allow the phone to restart. This won't bring in major changes, but you might have to make some minor changes in the network setup.
Install Windows Mobile 6.5
This is where you get down to installing the new OS.
Step 1: Connect the Phone with PC
Step 2: Extract the downloaded bootloader again, but to a different location
Step 3: Extract the Windows Mobile 6.5 ROM to the same directory where you have the bootloader. It would be an .NBH file of about 80-100 MB.
Step 4: Now Run the bootloader and follow the instructions.
Step 5: Wait, the process will take 15 to 20 minutes
Step 6: After your phone is reset, the Windows Mobile 6.5 splash screen will appear. It appears somewhat hacked. But, your job is done.
Step 7: WinMo would automatically anticipate your connection settings and apply the appropriate connection settings. In case, it doesn't, you can do it from the device's Settings page, found in the top level of the new start menu.
Click to expand...
Click to collapse
Ok now the problem:
The first step was succesful, i installed the bootloader.
Then i went to the radio update: So i downloaded the radio version: 1.09.25.23. There are 2 files in that: 1.09.25.23.nbh and customRUU.
I first clicked the costomRUU twice, and started the thing, but it got stucked. So i went back to the webpage to look, and i found i had to copy the stuff into the bootloader shizzle. So i copied 1.09.25.23.nbh and customRUU into the map with: enterbootloader, errorbattery, errorusb, modelID, rapitool, romupdateutility.cgf, romupdateutility, RUU_signed.nbh, RUUgetinfo, RUURescource.dll, SSPL-Manual.. And i double-clicked the romupdateutility. I did everything the thing said, But after a short period of time, like 3 minutes, an error occured. So i did the same after resetting my device.. same problem. The same problem occures when i try this with the wm6.5 file. I downloaded BsB65K. from: http://forum.xda-developers.com/showthread.php?t=506533. I copied the nbh-file into the bootloader thing, runned the romupdateutility, and got same problems as with teh radio, what am i doing wrong?
Kind regards, Michiel.
The radio did come with a bootloader - customRUU.exe, skip to step 5. I know you did try using the customRUU and it got stuck; do it again. Extract the original radio file you downloaded, don't piss around with the files you've copied around at this point. Extract it and double click the customRUU after you've connected via ActiveSync. Once that's done extract the ROM you want, copy it to the root of the internal storage, press reset then hold vol down and <- at the same time until you get the boot menu, press power once to install the new ROM.
Thanks for the helping.
But, is this for radio only?
And i still have the problem. I did as u said:
-extract the radio files on the pc: 1.09.25.23.nbh and customRUU
-double click customruu, (do i have to run the whole setup, or just the first step? )
-what is the rom? the .nbh-file? because i copied the nbh into my storage of my mobile device.
-then i do the reset.
so i have to know how i have to run the setup, btw, at the reset or do i have to run it before.
regards
Did you Hard-spl? if not, thats your problem.
Nope that was radio and ROM.
Extract the files from the radio file. Connect the phone via activesync. Run the customRUU. Follow the instructions on the screen. Once it completes your radio is updated.
Now extract the ROM you want to upgrade to. Copy the diaming.nbh file from it into your internal storage. Press reset and hold vol down and <- until you get the boot menu. One option will be to install the DIAMING.nbh by pressing the power button. Press the power button once.
It will tell you when it's complete. Reset and enjoy. The method I describe is faster and easier than using activesync to install the new ROM.
When i hold reset+vol down, i get a 3 color+white screen.. witch says not except some rom information. etc.
And yes i did hardspl. i got rom SPL- 1.30 Olinex.
upgrade your hard-spl to: RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
download here: http://rapidshare.de/files/40191554/RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip.html click free user and you are ready to go...
hope this helps you
Is it a problem im having a vodafone device. bcs i hate the vodafone theme etc.. hate all the vodafone stuff actually
(got other theme now.. but anyway)
May I ask what the error is you're getting?
Thank you very much all, its working perfect.
this one can be closed

Help me to unlock htc 8525 spl1.11

i have a htc 8525 at$t locked-details as below
rom version 2.15.502.3
rom date 04/09/07
radio version 1.40.30.00
bootloader screen details as below
HERM100
IPL-1.03
SPL-1.11
i got HTC_Hermes_SIM_Unlock_v2a to unlock-in it procedure as below.
Install Instructions:
1. Enter bootloader mode on your Phone. To do this, simultaneously hold side OK and POWER buttons together and reset
with stylus.
[You should see SPL-1.04 on the top of the tri-color screen, if you see SPL-1.06 this unlocker will not work, please
wait for the next version]
2. Connect your phone to your computer using the USB lead.
3. Run the MaUpgradeUt_noID.exe program – this will reflash your phone with a patched radio ROM required to unlock.
4. Wait patiently.
5. Once the MaUpgradeUt_noID.exe upgrade completes, it will end up saying "Upgrade Error 114", but the patched radio ROM
will be flashed anyway, dont worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
7. Allow your phone to reboot. Once it has, connect to your PC using Activesync, and copy the HERM_Unlock_v2a.exe program
onto your phone. Alternatively, copy it to an SD card and insert into your phone.
8. Run HERM_Unlock_v2a.exe on your phone. Wait about 1 minute.
9. You should see a "SUCCESS!" message from HERM_Unlock_v2a.exe, after that soft reset your phone.
10. Process is (hopefully) complete!
11. If the phone requests unlock code when you put a locked SIM, the code is: 22051978
but my doubt is my SPL is 1.11
can i unlock using HTC_Hermes_SIM_Unlock_v2a?
help me
thank u

Categories

Resources