Develop Bugs

"Un-brick" Imate JasJar After Failed ROM Update

First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick

Did like u said.
Still country id error

works now
thanks

my device t-mobile mda pro jasjar bootloader nope
rsteel1 said:
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Click to expand...
Click to collapse
this method how?my jasjar can open normal ?

help me
error 101 problem

error 150 problem
MaUpgradeUt_noID trying in my jasjar error problem 150 .whats saying ? problm where? usb dont recognize xp .what must ı do?

please help me im using Vista and cant get connection with my imate to my pc... and what is a radio update if you can help me add my msn!
i dont want to update anymore i just want to get my wm5!

Have a look here:
http://wiki.xda-developers.com/index.php?pagename=FlashVista
Hope it helps,

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.

Thanks.

Thanks!
There is only one thing, step 4, it is not USB but Serial.

Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.

It doesn't seem to work with last Qtek 9000 ROM...
Help!

OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.

cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted

Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.

someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."

thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems

Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve

Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!

Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care

Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?

Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot

Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.

Many thanks! PU10 by German T-Mobile upgraded to WWE

I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?

Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers

Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

T-Mobile Dash rom on a HTC 620 it's possible?

Hi boys
I have a question for you..
Can I load the T-Mobile Dash Rom on my HTC S620Pro unlocked?
I love the T-Mobile Dash Home screen theme and i f it's possible I want run it on my HTC S620 Excabilur
Thank you in advance for the answer

Yep but you might need to CID unlock (obtain SuperCID) which costs £20 ($39). If you just want the home screen just ask someone for it and copy it on. I would post it but I currently have the WM6 Dash ROM on my S620 and it probably doesn't have the home screen you mention.

I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............

hope this helps
http://www.esnips.com/web/xdadevelopers
please post after a reply if its ok !!!1

bidinot said:
I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............
Click to expand...
Click to collapse
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse

Hello,
Thanks for the great guide.When I get to the part to look for the bsa file in the hex editor program I cant seem to find it.Also, when I save the hex editied files do I save them to the folder were I extracted the Rom.I tried to run the utility without editing the bsa file (because I could not find it) and when I tried running it after pulling the usb cord it gave me the error message Invalid Update Tool.Do you know of anyone who can edit the T-Mobile WM6 Rom for me even if I have to pay for it.....
One last question...the rom I am supposed to edit with hex editor is it the new Rom (t-Mobile WM6) or the bootloader upgrade Rom..
Thanks in advance!!
r0p3 said:
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Click to expand...
Click to collapse

T Mobile Mail Uk Version

Could any one tell me how i can upgrade this phone to Windows Mobile 6.
I have tried using the USA version download but it will not load saying the phone model is wrong.
Also is it possable to activate the wi fi on this as i understand it is there but dissabled.
Any help will be much appreciated.

hi,
first unlock the phone (cid unlock)
here:
http://www.imei-check.co.uk/dashunlock.php
then download the rom for wm6
and follow this steps :
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!)
==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again).
just follow it exactly and it will work,
i just got scared my self when i got data chrashed, but a few minutes later everythinbg worked well.
iff you want to change anything in the rom you ll need appunlocker.
4 wifi go to connection manager and push 3
wifi is activated.
just 1 thing, youre from uk, best thing is to backup keyboard settings.
its arround in this forum what it is exactly, i forgot this and now some keys are mapped wrong (like @ £ !)
so back this up, and i could use a copy of it

im scared does this work anybody??

I have no idea why the "preparation steps" was necessary ( post #2 ) with all the HEX editing ...
WHY ???
~~~
for me ... I did the paid CID service and then followed this method ... works fine without all that messing around with HEX editing ...etc ( except for the keyboard region setting )
http://forum.xda-developers.com/showthread.php?t=288230
I've been WM5 <<<--->>> WM6 ... numerous times without any problem by the method in the link I gave.
~~~

Problems installing, wm6.5

hello all,
i was about to install wm6.5, but i cant get it done.
Mobile: Htc touch diamond (ofcourse)
Rom: 1.37.172.3 NLD (i went to this thread: http://forum.xda-developers.com/showthread.php?t=400402 , and did everything they said, and the rom update was succeful.. so i dont understand why my mobile says its this rom.)
radio: 1.00.25.03
I followed this steps:
How to install the Windows Mobile 6.5 in your HTC mobile
This howto was conducted on GSM HTC Touch Diamond. For all other HTC sets running the Windows 6.5 the consequences will be the same.
Requirement
HTC Touch Diamond or Touch Pro (GSM only)
Windows Mobile 6.5 ROM (Choices: Diamond , Pro )
Account at XDA Developers(free)
Windows PC set up to sync with your handset
Device flashing utility
bootloader(Diamond , Pro )
Device Radio (Diamond , Pro ). Ensure that you download the Original list.
Now, if you are done with the requirements its time to back up with your contacts and personal info. For this you might take the help of Microsoft's free online service called My Phone. Remember, the installation would remove the software installed in your device, so don't forget to keep a back up.
Install the bootloader
What you need to know is that you are installing an unofficial softwar, something that your mobile phone is not used to do. To begin with install a new bootloader hardSPL on the device. This will allow your handset to accept third party services like the Windows Mobile ROM. Go ahead with the steps
Step 1: Connect your mobile phone to your Windows PC. Establish the ActiveSync (on XP) or Sync Center (on Vista, or Windows 7) connection to your device. Make sure the connection is active. To check this see if there is a bidirectional arrow in your Phones taskbar.
Step 2: Extract the bootloader you've downloaded and note the location
Step 3: Now find the extracted files and run the executable file ( it is usually called ROMUpdateUtility.exe)
Step 4: Follow the instructions. The software will perform a number of checks. You must make sure you have the following
i) The handset has 50 % battery life in your phone
ii) The correct bootloader
iii) host computer that doesn't go down
Step 5: Can you see the paired progress bars on your phone and computer screen. This part of the process doesn't take long as it is a small piece of software.
Step 6: Now Restart your phone. The small text will appear in the corner of your Windows Mobile splash screen. This might be unfamiliar.
If the utility runs completely, the device will be restarted on its own.
Install a new device radio
Installing a fresh Radio onto the device usually won't make much of a change in how your phone works. Some radios can improve reception on certain networks. Let's get on with the technique
Step 1: Connect your phone to the PC
Step 2: Extract the download radio files and note their location
In case, the radio comes with a bootloader, jump to step 5
Step 3: Extract the downloaded bootloader, using the location
Step 4: Copy the extracted radio file, with an .NBH extension to the directory where you have placed the bootloader
Step 5: Run the bootloader
Step 6: Perform the instruction in step 4 and 5 provided in the bootloader installation procedure
Step 7: Allow the phone to restart. This won't bring in major changes, but you might have to make some minor changes in the network setup.
Install Windows Mobile 6.5
This is where you get down to installing the new OS.
Step 1: Connect the Phone with PC
Step 2: Extract the downloaded bootloader again, but to a different location
Step 3: Extract the Windows Mobile 6.5 ROM to the same directory where you have the bootloader. It would be an .NBH file of about 80-100 MB.
Step 4: Now Run the bootloader and follow the instructions.
Step 5: Wait, the process will take 15 to 20 minutes
Step 6: After your phone is reset, the Windows Mobile 6.5 splash screen will appear. It appears somewhat hacked. But, your job is done.
Step 7: WinMo would automatically anticipate your connection settings and apply the appropriate connection settings. In case, it doesn't, you can do it from the device's Settings page, found in the top level of the new start menu.
Click to expand...
Click to collapse
Ok now the problem:
The first step was succesful, i installed the bootloader.
Then i went to the radio update: So i downloaded the radio version: 1.09.25.23. There are 2 files in that: 1.09.25.23.nbh and customRUU.
I first clicked the costomRUU twice, and started the thing, but it got stucked. So i went back to the webpage to look, and i found i had to copy the stuff into the bootloader shizzle. So i copied 1.09.25.23.nbh and customRUU into the map with: enterbootloader, errorbattery, errorusb, modelID, rapitool, romupdateutility.cgf, romupdateutility, RUU_signed.nbh, RUUgetinfo, RUURescource.dll, SSPL-Manual.. And i double-clicked the romupdateutility. I did everything the thing said, But after a short period of time, like 3 minutes, an error occured. So i did the same after resetting my device.. same problem. The same problem occures when i try this with the wm6.5 file. I downloaded BsB65K. from: http://forum.xda-developers.com/showthread.php?t=506533. I copied the nbh-file into the bootloader thing, runned the romupdateutility, and got same problems as with teh radio, what am i doing wrong?
Kind regards, Michiel.

The radio did come with a bootloader - customRUU.exe, skip to step 5. I know you did try using the customRUU and it got stuck; do it again. Extract the original radio file you downloaded, don't piss around with the files you've copied around at this point. Extract it and double click the customRUU after you've connected via ActiveSync. Once that's done extract the ROM you want, copy it to the root of the internal storage, press reset then hold vol down and <- at the same time until you get the boot menu, press power once to install the new ROM.

Thanks for the helping.
But, is this for radio only?
And i still have the problem. I did as u said:
-extract the radio files on the pc: 1.09.25.23.nbh and customRUU
-double click customruu, (do i have to run the whole setup, or just the first step? )
-what is the rom? the .nbh-file? because i copied the nbh into my storage of my mobile device.
-then i do the reset.
so i have to know how i have to run the setup, btw, at the reset or do i have to run it before.
regards

Did you Hard-spl? if not, thats your problem.

Nope that was radio and ROM.
Extract the files from the radio file. Connect the phone via activesync. Run the customRUU. Follow the instructions on the screen. Once it completes your radio is updated.
Now extract the ROM you want to upgrade to. Copy the diaming.nbh file from it into your internal storage. Press reset and hold vol down and <- until you get the boot menu. One option will be to install the DIAMING.nbh by pressing the power button. Press the power button once.
It will tell you when it's complete. Reset and enjoy. The method I describe is faster and easier than using activesync to install the new ROM.

When i hold reset+vol down, i get a 3 color+white screen.. witch says not except some rom information. etc.
And yes i did hardspl. i got rom SPL- 1.30 Olinex.

upgrade your hard-spl to: RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
download here: http://rapidshare.de/files/40191554/RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip.html click free user and you are ready to go...
hope this helps you

Is it a problem im having a vodafone device. bcs i hate the vodafone theme etc.. hate all the vodafone stuff actually
(got other theme now.. but anyway)

May I ask what the error is you're getting?

Thank you very much all, its working perfect.
this one can be closed