Encountered this yesterday with my BA.. The unit could not be turned on and I decided to do a reset. When I reset it, the unit would be stuck at the O2 logo screen and remain there forever..
Did a hard reset and then reinstalled my apps. After spending 4 hours on it, the unit refused to respond and I did a soft reset. After that, it got stuck at the boot screen again..
Just wondering if anyone had similar experiences with the BA and under these situations, is there anything that can be done to unfreeze the unit while still retaining the data in the machine? :roll:
Hi
try to upgrade ur rom ....
tell me what error u got!
Thanks
The ROM at that time was the latest version..there was no error..it was just stuck at the O2 screen..
Anyway..I did a hard reset and cleaned up the stuff that's not required..so far it seems quite stable. But i installed safemode as precaution..
Desperately need help here! Tried to upgrade my ROM/Radio etc etc. It seems to have failed because i can't get the Universal to turn on now! Soft reset, Hard reset both have the same effect - basically the screen simply turns a horrible mix of green and red pixels. The unit freezes. Can't do a THING with it! HELP ME PLEASE!
I tried to upgrade my Qtek 9000 with last ROM and now I cant come over ALIGN SCREEN.It says align screen all the time.I didnt backup my old ROM.
Does anyone know, what to do?
Hi there, i got hold of a Hermes yesterday and since that moment i've been trying to flash it to a decent wm6.1 rom.
but i ran in some problems.. first i flashed HardSPL 7. then i flashed the radio to 1.4x and even 1.5x and some roms. the last ROM i tried is the latest TNT.
but for some reason i keep getting crashes, missing shortcut links and when i reboot at that moment it keeps stuck at the bootscreen picture. this happened serveral times now and its getting on my nerves..
i already used MTTY with the info 8 command. and it only returned some "Reversed" blocks, none were bad.
Can someone please tell me if i am doing something wrong? or how i can solve the issue?
i already tried leaving it be for 5 minutes, remove battery, and did like 30 hard-resets already..!
help?
happened to me once
have you done a manual hard reset? at least i think thats what its called. where you hold both soft keys(ones above start/ok) and press the button in with your stylus all at one time till the white reset screen comes up..then just press R and SPACE on the keyboard.
now once it reloads and is finally done...flash vg3's at&t wm6 rom..once its all done flash your 6.1 rom of your liking..
its something to do with the memory i dunno but i just flash vg3's at&t wm6 rom every single time before i flash to another 6.1 rom and i've never had that happen to me again and trust me it happened a lot before..it never happens now
Yes i did do the hard-reset manually.
i will try the vg3's rom first thing tommorow.
HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks
I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit
Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks
Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate
I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion
flash YUE back via SD card flashing
I already tried that, flashes fine, but becomes unresponsive soon after
have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta
A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now
What's up if you remove your MicroSD card ?
That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.
Hi,
P.S: I have read almost every post and thered and wiki and what ever, nothing worked for me, need advice.
My ppc is i-mate jasjam herm100
ipl-1.00
spl-1.04
it was running just fine, then out of the blue, it hang i reset the phone with the styles as I was unable to shut it down due to the hang, once restarted it is stuck on the tri-color screen.
tried to restore defaults, using the front 2 softkeys and the reset with the styles, then i confirmed the restore pressing the 'R' button it took 1 sec and told me it is restored, tried to restart the phone same tri-color screen, so I have been every where forums wiki post to solve this issue but was unable, I don't need to be WM6 or any thing I just need my phone working even if running WM3 "kidding" all what I want is the phone life and kicking again, if any one can help me here, it is appriciated alot.
Thank you.