Hi all,
I droped my qtek s200 a few days ago now iam looking for a orginal compleet housing for my qtek s200 ( face plate,chassis,back complete with silver windows mobile logo and chrome strips ) a orginal Dopod is fine to no 02 stuff, i did a few searches on the forums but only thing i found was o2 stuff and a spv housing.
who can me help me?
regards
Mike
probally ia'm going to buy the orange housing spv, my question how does a fibreglass pencil works?
Hi,
so you want to remove the writing on the case?
ive been hearing 'sugar cubes' work on removing logo's on the I mate jam casing. Its worth a shot.
Whitemoo.
Be careful! The Jam had an aluminium case and sugar cubes can't scratch aluminium but the Jamin's case is made of plastic which might get scratched! Try on a corner or somewhere that scratches can't be seen before you do it on the face of the Prophet.
tx for the info, iam probally going to do it with a fibreglass pencil first i need to wait what my insurance will do because my touchscreen died :S it can't be touched.
Repose said:
tx for the info, iam probally going to do it with a fibreglass pencil first i need to wait what my insurance will do because my touchscreen died :S it can't be touched.
Click to expand...
Click to collapse
I've done it with a sugar cube on my spv m600 (prophet) and it worked. ORANGE logo is out now. No scratches and no paint removed
Related
hi
i'm a proud owner of the blue angel (imate flavor ) but the only thing i'd like is to have the xdaiis black cover.... does anyone have any idea where i can buy it? i emailed o2 but they wouldnt reply.... any help appreciated.....
Get a can of spray paint and do it yourself!
well i tried it twice before on my old imate (xdaII) one of them by a professional... but for some reason both didn't turn out good lookin... so i was wondering if its possible to get like spare parts from o2..
i also got a bad bump an the top right corner so i was thinkin about changin the whole cover.....so anyone?
you may think its black but is a dark silver. i wouldn't bother trying to change the cover.
but just think if you were to accidentally to lose you blue angel the nice insurance guys might replace it with a black one?
well whatever color it i just love it...and where i'm currently livin...no insurance, no xda's...just imates....
is it that hard to contacts o2 for spare parts?
come on cant anyone get me a clear answer if i could get my hands on one??? it'd be returnable favor
have a look on ebay sometimes xda2s come up as parts
hi guys, i need to buy a screwdriver that will fit the screws on an xda2s, as i am going to try and fix a mates xda2s
for him as he cracked his screen and wants tobuy a new screen from
http://www.pdasmart.com/pdaphonexda2s.htm
he dont want to pay for screen yet until we can get a screwdriver for it.
its knackerd now, so we really have nothing to loose.
cananyone suggest a site i can get a screwdriver kit for this operation/??
cheers chaps.
I have an HTC MDA2 Service Manual (pdf), applicable to XDAII. It's suggested tools are a flat 2.4mm, Philips #0, TX6x40, a plastic stick! and tweezers. I got a Draper Expert 14 in 1 driver set for £19ish at Halfords, it has all the required items, there was a cheaper set with a TX6!
have the same question, these are like small starred screws
the small torx #T-6 is avilable on e-bay
or your local lucas in the U.K.,check your yellow pages under auto electritians.
Cheers
Hey so I purchased a new housing for my Universal and it arrives from Hong Kong with no instructions... I have replaced a few housings in the past but this by far is the most dificult.
I was wondering if anyone had any photos or instructions from a housing change they had done. I am right now stuck trying to remove the piece on top of the keyboard which ends up being bound to the motherboard by touchscreen connectors from the lcd. Any help would be great as I am truly in a bind.
Also, if anyone has any instructions on changing a housing on the MDA or any other IMATE/HTC product I could use those as well. THANKS.
I've changed my housing and it's pretty straight forward if you are careful and have the right tools.. A copy of the service manual with step by step disassembly and assembly is on the ftp site at..
ftp://xda:[email protected]/Universal/UNniversalL_Service_Manual_CONFIDENTIAL.pdf
The only problem I had was with the keyboard membrane in that it was slightly different to the old one. There are dimples that press against the membrane switched and these were in a different position on the space bar on the new membrane, so I found that the space bar didn't work and had to take the whole thing to pieces again. Also I found that the new housing didn't need three securing screws.
Anyway, It can be done just do it on a clear worktop with plenty of space.I printed out all the sheets and placed the disassembled part/screw on the relevant sheet, this stops screws getting mixed up!!
Going to give it a try right now. I appreciate it.
Hi Odyseus.Have you bought the keyboard too? I have found the housing but without keyboard(and mine's silver) in this shop in UK http://www.mobilefun.co.uk/product/10679.htm
I think it's a good idea to print out the sheets
I think the housing should come with a new keyboard pad? (Not the keyboard switch assembly. but the membrane with the keypads on).
Benbenben let us know how it goes. :lol: Why are you changing cases BTW? Different color or damaged?
hi guys !
my problem is written in Title kiddin
before 2 days my brother broke screen on my baby and i have some questions! screen got little crack, color, sharpnesss etc. is normal but its not touch screen anymore! :/
so what should i buy: that plastic which he broke (costs 20$) or whole touch screen (costs about 100$) ?
more reasonably is to buy that plastic, but some guy told me that i need to buy whole screen (he wanna sell it to me for about 120e) but i dont belive him!
what are our opinions ??
bye
I buy you the PCB cable of the LCD!!
Mine is cutted and I have a good LCD and bad PCB cable!!
Does anyone knows how to remove it? and to glue it back?
Hi guys I dissamble several times my xda Orbit using a maual posted in this excellent forum, but a month ago my Orbit fall down and some tears are broken in the side of the front cover, and dont close well.
I buy a replacement housing but I dont know how transfer the leds and vibrator to new housing without kill it
Please anybody do this before, let me know how you did it?
If you did with a Artemis and not a Orbit let me know too?
Or if you know that somebody have a broken Orbit but the front cover is intact and he/she want to sell, let me know please.
I have original parts of artemis from dead devices. PM me.